Maskinsikkerhed Elektrisk materiel på maskiner Del 32: Krav til løftemaskiner

Save this PDF as:
 WORD  PNG  TXT  JPG

Størrelse: px
Starte visningen fra side:

Download "Maskinsikkerhed Elektrisk materiel på maskiner Del 32: Krav til løftemaskiner"

Transkript

1 Dansk standard DS/EN udgave Maskinsikkerhed Elektrisk materiel på maskiner Del 32: Krav til løftemaskiner Safety of machinery Electrical equipment of machines Part 32: Requirements for hoisting machines

2 DS/EN København DS projekt: M ICS: Første del af denne publikations betegnelse er: DS/EN, hvilket betyder, at det er en europæisk standard, der har status som dansk standard. Denne publikations overensstemmelse er: IDT med: IEC Ed. 2.0:2008. IDT med: EN :2008. DS-publikationen er på engelsk. Denne publikation erstatter: DS/EN :2001. DS-publikationstyper Dansk Standard udgiver forskellige publikationstyper. Typen på denne publikation fremgår af forsiden. Der kan være tale om: Dansk standard standard, der er udarbejdet på nationalt niveau, eller som er baseret på et andet lands nationale standard, eller standard, der er udarbejdet på internationalt og/eller europæisk niveau, og som har fået status som dansk standard DS-information publikation, der er udarbejdet på nationalt niveau, og som ikke har opnået status som standard, eller publikation, der er udarbejdet på internationalt og/eller europæisk niveau, og som ikke har fået status som standard, fx en teknisk rapport, eller europæisk præstandard DS-håndbog samling af standarder, eventuelt suppleret med informativt materiale DS-hæfte publikation med informativt materiale Til disse publikationstyper kan endvidere udgives tillæg og rettelsesblade DS-publikationsform Publikationstyperne udgives i forskellig form som henholdsvis fuldtekstpublikation (publikationen er trykt i sin helhed) godkendelsesblad (publikationen leveres i kopi med et trykt DS-omslag) elektronisk (publikationen leveres på et elektronisk medie) DS-betegnelse Alle DS-publikationers betegnelse begynder med DS efterfulgt af et eller flere præfikser og et nr., fx DS 383, DS/EN 5414 osv. Hvis der efter nr. er angivet et A eller Cor, betyder det, enten at det er et tillæg eller et rettelsesblad til hovedstandarden, eller at det er indført i hovedstandarden. DS-betegnelse angives på forsiden. Overensstemmelse med anden publikation: Overensstemmelse kan enten være IDT, EQV, NEQ eller MOD IDT: Når publikationen er identisk med en given publikation. EQV: Når publikationen teknisk er i overensstemmelse med en given publikation, men præsentationen er ændret. NEQ: Når publikationen teknisk eller præsentationsmæssigt ikke er i overensstemmelse med en given standard, men udarbejdet på baggrund af denne. MOD: Når publikationen er modificeret i forhold til en given publikation.

3 EUROPEAN STANDARD EN NORME EUROPÉENNE EUROPÄISCHE NORM September 2008 ICS ; Supersedes EN :1998 English version Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines (IEC :2008) Sécurité des machines - Équipement électrique des machines - Partie 32: Exigences pour les appareils de levage (CEI :2008) CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung Sicherheit von Maschinen - Elektrische Ausrüstung von Maschinen - Teil 32: Anforderungen für Hebezeuge (IEC :2008) This European Standard was approved by CENELEC on CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Central Secretariat: rue de Stassart 35, B Brussels 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN :2008 E

4 EN : Foreword The text of document 44/574/FDIS, future edition 2 of IEC , prepared by IEC TC 44, Safety of machinery - Electrotechnical aspects, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN on This European Standard supersedes EN :1998. EN :2008 includes the following significant technical changes with respect to EN :1998. a) Changes to EN :2006 have been incorporated, especially: deletion of Clause 11 of EN :1997; modification of the structure of equipotential bonding (Clause 8); separation of control functions (Clause 9) and devices (Clause 10); structure of technical documentation (Clause 17); verification of protection by automatic disconnection of supply (18.2). b) Subclause on cableless controls has been modified. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) latest date by which the national standards conflicting with the EN have to be withdrawn (dow) This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and covers essential requirements of EC Directives 98/37/EC and 2006/42/EC. See Annex ZZ. Annexes ZA and ZZ have been added by CENELEC.

5 - 3 - EN :2008 Endorsement notice The text of the International Standard IEC :2008 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC ISO ISO ISO NOTE Harmonized as HD 472 S1:1989 (modified). NOTE Harmonized as EN :2000 (not modified). NOTE Harmonized as EN :1998 (modified). NOTE Harmonized as EN 60228:2005 (not modified). NOTE Harmonized as EN :2007 (not modified). NOTE Harmonized as EN :2001 (not modified). NOTE Harmonized in EN series (partially modified). NOTE Harmonized in EN/HD series (modified). NOTE Harmonized as EN :1993 (not modified). NOTE Harmonized in EN series (modified). NOTE Harmonized in EN series (not modified). NOTE Harmonized as EN :2007 (not modified). NOTE Harmonized as EN :2007 (not modified). NOTE Harmonized as EN :2005 (not modified). NOTE Harmonized as EN :2007 (not modified). NOTE Harmonized as EN :2007 (not modified). NOTE Harmonized as EN :1994 (not modified). NOTE Harmonized as EN :2004 (modified). NOTE Harmonized in EN series (not modified). NOTE Harmonized as EN :1997 (not modified). NOTE Harmonized in EN series (not modified). NOTE Harmonized as EN 61984:2001 (not modified). NOTE Harmonized in EN series (not modified). NOTE Harmonized as EN ISO :2001 (not modified). NOTE Harmonized as EN ISO :2001 (not modified). NOTE Harmonized as EN ISO :2001 (not modified).

6 EN : Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by, the relevant EN/HD applies. Publication Year Title EN/HD Year IEC ) Rotating electrical machines - EN ) Part 1: Rating and performance IEC ) Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification IEC ) Rotating electrical machines - Part 11: Thermal protection IEC Basic environmental testing procedures - Part 2: Tests - Test Ea and guidance: Shock IEC A EN ) EN ) EN Environmental testing - Part 2: Tests. Test Ed: Free fall EN IEC ) Dimensions and output series for rotating electrical machines - Part 1: Frame numbers 56 to 400 and flange numbers 55 to IEC ) Dimensions and output series for rotating electrical machines - Part 2: Frame numbers 355 to and flange numbers to IEC ) Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators IEC ) Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements IEC IEC IEC Series Tests on electric and optical fibre cables under fire conditions - 1) Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions 2005 Low-voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock EN ) EN EN ) 2004 Series HD ) HD corr. July IEC Electrical installations of buildings - Part 4-42: Protection for safety - Protection against thermal effects 1) Undated reference. 2) Valid edition at date of issue.

7 - 5 - EN :2008 Publication Year Title EN/HD Year IEC Electrical installations of buildings - Part 4-43: Protection for safety - Protection against overcurrent IEC Electrical installations of buildings - Part 5-52: Selection and erection of electrical equipment - Wiring systems IEC IEC IEC IEC IEC IEC Electrical installations of buildings - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control 2002 Electrical installations of buildings - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements, protective conductors and protective bonding conductors 2006 Low voltage electrical installations - Part 6: Verification Data base HD ) HD HD Graphical symbols for use on equipment Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies - 1) Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals and conductor terminations IEC Basic and safety principles for man-machine interface, marking and identification - Identification of conductors by colours or numerals IEC ) Basic and safety principles for man-machine interface, marking and identification - Actuating principles IEC IEC Data base Degrees of protection provided by enclosures (IP Code) EN EN ) EN ) 1999 EN ) EN corr. May Graphical symbols for diagrams IEC Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests IEC Series Electrical accessories - Circuit breakers for overcurrent protection for household and similar installations IEC Low-voltage switchgear and controlgear - Part 1: General rules IEC Low-voltage switchgear and controlgear - Part 2: Circuit-breakers EN EN Series EN EN ) IEC :2001/:2002, Clause 534: Devices for protection against overvoltages is harmonized as HD ) EN 60446:1999 is superseded by EN 60446:2007, which is based on IEC 60446:2007.

8 EN : Publication Year Title EN/HD Year IEC ) Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switchdisconnectors and fuse-combination units IEC Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motorstarters EN ) EN IEC Low-voltage switchgear and controlgear - EN Part 5-1: Control circuit devices and switching + corr. July elements - Electromechanical control circuit devices IEC Preparation of documents used in electrotechnology - Part 1: Rules IEC ) Protection against electric shock - Common aspects for installation and equipment IEC High-voltage test techniques for low-voltage equipment - Part 2: Test equipment IEC IEC Series Safety of machinery - Indication, marking and actuation Series Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations IEC ) Electrical safety in low voltage distribution systems up to V a.c. and V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance IEC ) Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests IEC ) Safety of power transformers, power supply units and similar - Part 2-6: Particular requirements for safety isolating transformers for general use IEC Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional EN EN ) EN EN EN Series Series EN ) EN corr. August ) 2006 EN ) EN IEC ) Connectors - Safety requirements and tests EN ) IEC ) Structuring of technical information and documentation EN ) IEC ) Preparation of parts lists EN ) IEC ) Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems IEC ) Preparation of instructions - Structuring, content and presentation ISO Graphical symbols for use on equipment - Index and synopsis EN ) EN )

9 - 7 - EN :2008 Publication Year Title EN/HD Year ISO ) Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology ISO Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles ISO Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design ISO Safety of machinery - Safety-related parts of control systems - Part 2: Validation ISO Safety of machinery - Emergency stop - Principles for design ISO Safety of machinery - Two-hand control devices - Functional aspects and design principles ISO Safety of machinery - Safety distances to prevent danger zones being reached by the upper limbs EN ISO ) EN ISO EN ISO EN ISO EN ISO