Informationsteknologi Kontorudstyr Minimumoplysninger, der skal fremgå af specifikationsark Printere Del 2: Klasse 3- og 4-printere
|
|
- Per Mørk
- 8 år siden
- Visninger:
Transkript
1 Dansk standard DS/ISO/IEC udgave Informationsteknologi Kontorudstyr Minimumoplysninger, der skal fremgå af specifikationsark Printere Del 2: Klasse 3- og 4-printere Information technology Office equipment Minimum information to be included in specification sheets Printers Part 2: Class 3 and Class 4 printers
2 DS/ISO/IEC København DS projekt: M ICS: Første del af denne publikations betegnelse er: DS/ISO/IEC, hvilket betyder, at det er en international standard, der har status som dansk standard. Denne publikations overensstemmelse er: IDT med: ISO IEC :2013. DS-publikationen er på engelsk. Denne publikation erstatter: DS/ISO/IEC :1997. DS-publikationstyper Dansk Standard udgiver forskellige publikationstyper. Typen på denne publikation fremgår af forsiden. Der kan være tale om: Dansk standard standard, der er udarbejdet på nationalt niveau, eller som er baseret på et andet lands nationale standard, eller standard, der er udarbejdet på internationalt og/eller europæisk niveau, og som har fået status som dansk standard DS-information publikation, der er udarbejdet på nationalt niveau, og som ikke har opnået status som standard, eller publikation, der er udarbejdet på internationalt og/eller europæisk niveau, og som ikke har fået status som standard, fx en teknisk rapport, eller europæisk præstandard DS-håndbog samling af standarder, eventuelt suppleret med informativt materiale DS-hæfte publikation med informativt materiale Til disse publikationstyper kan endvidere udgives tillæg og rettelsesblade DS-publikationsform Publikationstyperne udgives i forskellig form som henholdsvis fuldtekstpublikation (publikationen er trykt i sin helhed) godkendelsesblad (publikationen leveres i kopi med et trykt DS-omslag) elektronisk (publikationen leveres på et elektronisk medie) DS-betegnelse Alle DS-publikationers betegnelse begynder med DS efterfulgt af et eller flere præfikser og et nr., fx DS 383, DS/EN 5414 osv. Hvis der efter nr. er angivet et A eller Cor, betyder det, enten at det er et tillæg eller et rettelsesblad til hovedstandarden, eller at det er indført i hovedstandarden. DS-betegnelse angives på forsiden. Overensstemmelse med anden publikation: Overensstemmelse kan enten være IDT, EQV, NEQ eller MOD IDT: Når publikationen er identisk med en given publikation. EQV: Når publikationen teknisk er i overensstemmelse med en given publikation, men præsentationen er ændret. NEQ: Når publikationen teknisk eller præsentationsmæssigt ikke er i overensstemmelse med en given standard, men udarbejdet på baggrund af denne. MOD: Når publikationen er modificeret i forhold til en given publikation.
3 INTERNATIONAL STANDARD ISO/IEC Second edition Information technology Office equipment Minimum information to be included in specification sheets Printers Part 2: Class 3 and Class 4 printers Technologies de l'information Équipements de bureau Information minimale devant figurer dans les notices techniques Imprimantes Partie 2: Imprimantes classe 3 et classe 4 Reference number ISO/IEC 2013
4 COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2013 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISO s member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel Fax copyright@iso.org Web Published in Switzerland ii ISO/IEC 2013 All rights reserved
5 Contents Page Foreword... iv Introduction... v 1 Scope Conformance Normative references Test and measurement conditions Information to be included in the specification sheets... 2 Annex A (normative) Classification of printers -Class 3 and Class Annex B (informative) Test Pattern Annex C (informative) Classification of Printers Annex D (informative) Example of a layout for a specification sheet Bibliography ISO/IEC 2013 All rights reserved iii
6 Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO/IEC was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 28, Office equipment. This second edition cancels and replaces the first edition which has been technically revised. ISO/IEC consists of the following parts, under the general title Information technology Office equipment Minimum information to be included in specification sheets Printers: Part 1: Class 1 and Class 2 printers Part 2: Class 3 and Class 4 printers Annex A forms an integral part of this part of ISO/IEC Annexes B, C and D are for information only. iv ISO/IEC 2013 All rights reserved
7 Introduction Printers of many different types and capacities are now available and their specifications vary so widely that it is difficult for potential users to assess which machine might best meet their requirements. ISO/IEC 2013 All rights reserved v
8
9 INTERNATIONAL STANDARD Information technology Office equipment Minimum information to be included in specification sheets Printers Part 2: Class 3 and Class 4 printers 1 Scope ISO/IEC is intended to facilitate users in selecting a printer which meets their requirements. ISO/IEC specifies the minimum information to be included in the specification sheets of printers in order for users to compare the characteristics of different machines. The term Specification Sheets applies to documents which describe the performance characteristics of the printers to be included in instruction manuals, product brochures or on websites. ISO/IEC applies to printers that could be operated in an office environment. Printers requiring specially equipped rooms or specially instructed operators are not considered in ISO/IEC ISO/IEC deals with different classes of printers This part of ISO/IEC accommodates Class 3 and Class 4 printers, as defined in Annex C. Detailed descriptions of Class 3 and Class 4 printers are specified in Annex A. Serial printers are classified as Class 1 or Class 2 printers as defined in Annex C and covered by Part-1 of ISO/IEC Conformance In order to comply with this part of ISO/IEC 11160, specification sheets shall include, in the order shown, all required items listed in clause 5 which are relevant to the machine being described. 3 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 7779, Acoustics Measurement of airborne noise emitted by information technology and telecommunications equipment ISO 9295, Acoustics Measurement of high-frequency noise emitted by computer and business equipment ISO 9296, Acoustics Declared noise emission values of computer and business equipment ISO/IEC 19752, Information technology Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that contain printer components ISO/IEC 19798, Information technology Method for the determination of toner cartridge yield for colour printers and multi-function devices that contain printer components ISO/IEC 2013 All rights reserved 1
10 ISO/IEC 24711, Method for the determination of ink cartridge yield for colour inkjet printers and multi-function devices that contain printer components ISO/IEC 24734, Information technology Office equipment - Method for measuring digital printing productivity 4 Test and measurement conditions Unless otherwise specified, all tests and measurements shall be conducted at the following conditions: a) Temperature: 23 C ± 5 C b) Relative humidity: 50 % ± 20 % c) Line Voltage: rated input voltage d) Line Frequency: rated frequency e) Paper size: A4 f) Paper weight: 60 g/m 2 to 90 g/m 2 g) Paper transport direction: standard direction For the test pattern, the document in Annex B (Informative) should be used. Annex B is derived from ISO/IEC 10561, where the guide line (character art, size etc) is given for the creation of the test target. So long as the document is text only, a bit of modification causes no influence over the results of measurement. For monochrome test pattern, all letters should be black. For colour test pattern, arbitrary letters should be colourized by using the primary colorants of the printer. Instead of A4 paper size, the size most commonly used in the country may be used, both for the test page and the copies. This shall be indicated in the specification sheet. 5 Information to be included in the specification sheets Table 1 defines, for each parameter, the name of the parameter and a short description of the entry. These constitute the information to be included in the specification sheet. Parameters whose properties shall be included in the specification sheets are marked as "R" (required), while other parameters whose properties are recommended to be included are marked as "O" (optional). The heading of the specification sheet shall indicate that it has been prepared in accordance with this part of ISO/IEC For every parameter, if any special instruction is not given, the name of the parameter of Table 1 shall be used without change. Non-applicable parameters may be ignored, without changing the order of remaining parameters. Additional parameters may be adjacently inserted to the related parameter in Table 1 for the purpose of describing the function which is not covered by other parameters. For a parameter with voluminous description, it may be stated separately and may use a figure or a table. In such case, the caption of the figure or the table shall be identical with the name of parameter shown in Table 1. The "Remarks and examples" column is provided for the persons who prepare the information sheet, and it is not intended to appear in the specification sheet. The column includes informative examples and normative test methods and descriptions. Test methods to be applied, when not defined in other International Standards, are defined in this column. Whenever a capacity is given in sheets, the reference paper weight (g/m 2 ) shall be specified Numbers attached to parameters are not normative but only for convenience. 2 ISO/IEC 2013 All rights reserved
Teknisk produktdokumentation Dokumenttyper
Dansk standard DS/ISO 29845 1. udgave 2011-09-30 Teknisk produktdokumentation Dokumenttyper Technical product documentation Document types DS/ISO 29845 København DS projekt: M245068 ICS: 01.110 Første
Læs mereInformationsteknologi Sikkerhedsteknikker. (MAC) Del 3: Mekanismer, der anvender universel hashfunktion
Dansk standard DS/ISO/IEC 9797-3 1. udgave 2012-01-04 Informationsteknologi Sikkerhedsteknikker Meddelelsesautentificeringskoder (MAC) Del 3: Mekanismer, der anvender universel hashfunktion Information
Læs mereDansk standard DS/ISO/IEC 27033-5
Dansk standard DS/ISO/IEC 27033-5 1. udgave 2013-09-02 Informationsteknologi Sikkerhedsteknikker Netværkssikkerhed Del 5: Sikring af kommunikation mellem netværk, der anvender virtuelle private netværk
Læs mereJordbrug Traktorer Bagmonteret trepunktsophæng Kategori 1N, 1, 2N, 2, 3N, 3, 4N og 4
Dansk standard Tillæg DS/ISO 730/Amd 1 1. udgave 2014-08-05 Jordbrug Traktorer Bagmonteret trepunktsophæng Kategori 1N, 1, 2N, 2, 3N, 3, 4N og 4 Agricultural wheeled tractors Rear-mounted threepoint linkage
Læs mereBeskyttelsesbeklædning til beskyttelse mod kemikalier Klassificering, mærkning og krav til ydeevne
Dansk standard Tillæg DS/ISO 16602/A1 1. udgave 2012-11-15 Beskyttelsesbeklædning til beskyttelse mod kemikalier Klassificering, mærkning og krav til ydeevne Protective clothing for protection against
Læs mereKirurgiske implantater Delvis og hel hofteledsprotese Del 2: Ledflader lavet af metalliske og keramiske materialer og plastmaterialer
Dansk standard DS/ISO 7206-2 1. udgave 2014-09-22 Kirurgiske implantater Delvis og hel hofteledsprotese Del 2: Ledflader lavet af metalliske og keramiske materialer og plastmaterialer Implants for surgery
Læs mereInformationsteknologi Åben distribueret databehandling Referencemodel: Arkitektonisk semantik Tillæg 1: Computerbaserede formler
Dansk Standard Tillæg DS/ISO/IEC 10746-4/Amd.1 1. udgave 2002-06-04 Informationsteknologi Åben distribueret databehandling Referencemodel: Arkitektonisk semantik Tillæg 1: Computerbaserede formler Information
Læs mereElektronisk arkivering Del 1: Specifikationer vedrørende udvikling og drift af et informationssystem til sikring af elektroniske dokumenter
Dansk standard DS/ISO 14641-1 1. udgave 2012-02-29 Elektronisk arkivering Del 1: Specifikationer vedrørende udvikling og drift af et informationssystem til sikring af elektroniske dokumenter Electronic
Læs mereFritidsdykkerservice Krav til snorkel/dykkerledelse
Dansk standard DS/ISO 13289 1. udgave 2012-02-03 Fritidsdykkerservice Krav til snorkel/dykkerledelse Recreational diving services Requirements for the conduct of snorkelling excursions DS/ISO 13289 København
Læs mereInformationsteknologi. Brugersystemets grænseflader og symboler. Ikonsymboler og funktioner. Del 6: Aktionsikoner
Dansk Standard DS/ISO/IEC 11581-6 Godkendelsesblad 1. udgave Godkendt:1999-12-07 Informationsteknologi. Brugersystemets grænseflader og symboler. Ikonsymboler og funktioner. Del 6: Aktionsikoner Information
Læs mereInformationsteknologi Cloudcomputing Referencearkitektur
Dansk standard DS/ISO/IEC 17789 1. udgave 2014-10-21 Informationsteknologi Cloudcomputing Referencearkitektur Information technology Cloud computing Reference architecture DS/ISO/IEC 17789 København DS
Læs mereInformationsteknologi Identifikation og styring af mobile enheder Service broker for Mobile AIDC services
Dansk standard DS/ISO/IEC 29178 1. udgave 2012-06-01 Informationsteknologi Identifikation og styring af mobile enheder Service broker for Mobile AIDC services Information technology Mobile item identification
Læs mereInformationsteknologi Sikkerhedsteknikker. Del 2: Vejledning i design og implementering af netværkssikkerhed
Dansk standard DS/ISO/IEC 27033-2 1. udgave 2012-09-11 Informationsteknologi Sikkerhedsteknikker Netværkssikkerhed Del 2: Vejledning i design og implementering af netværkssikkerhed Information technology
Læs mereFritidsdykkerservice Krav til snorkel/dykkerledere
Dansk standard DS/ISO 13970 1. udgave 2012-02-03 Fritidsdykkerservice Krav til snorkel/dykkerledere Recreational diving services Requirements for the training of recreational snorkelling guides DS/ISO
Læs mereInformationsteknologi Vejledning i anvendelse af ISO 9001:2008 til ITserviceledelse
DS-information DS/ISO/IEC TR 90006 1. udgave 2013-11-28 Informationsteknologi Vejledning i anvendelse af ISO 9001:2008 til ITserviceledelse og integreringen med ISO/IEC 20000-1:2011 Information technology
Læs mereKirurgiske implantater Knogleplader af metal Huller, der passer til skruer med asymmetrisk gevind og sfærisk underside
Dansk standard DS/ISO 5836 1. udgave 2014-10-10 Kirurgiske implantater Knogleplader af metal Huller, der passer til skruer med asymmetrisk gevind og sfærisk underside Implants for surgery Metal bone plates
Læs mereKirurgiske implantater Knoglesøm og knogletråd af metallisk materiale Del 1: Generelle krav
Dansk standard DS/ISO 5838-1 1. udgave 2014-11-03 Kirurgiske implantater Knoglesøm og knogletråd af metallisk materiale Del 1: Generelle krav Implants for surgery Metallic skeletal pins and wires Part
Læs mereInformationsteknologi Meddelelseshåndteringssystemer (MHS) Samarbejde med e-mail på internet
DS-information DS/ISO/IEC TR 18016 1. udgave 2004-03-25 Informationsteknologi Meddelelseshåndteringssystemer (MHS) Samarbejde med e-mail på internet Information technology Message Handling Systems (MHS)
Læs mereInformationsteknologi. Åbne systemers sammenkobling. Definition af præsentationslagstjeneste. Tillæg 2: Funktionsenhed for indskudt sammenkobling
Dansk Standard Godkendelsesblad Tillæg DS/ISO/IEC 8822/Amd.2 1. udgave Godkendt:1999-11-22 Informationsteknologi. Åbne systemers sammenkobling. Definition af præsentationslagstjeneste. Tillæg 2: Funktionsenhed
Læs mereInformationsteknologi Sikkerhedsteknikker. Del 3: Dedikerede hashfunktioner
Dansk standard Tillæg DS/ISO/IEC 10118-3/Amd. 1 1. udgave 2007-08-01 Informationsteknologi Sikkerhedsteknikker Hashfunktioner Del 3: Dedikerede hashfunktioner Information technology Security techniques
Læs mereDansk Standard DS/ISO/IEC 14754 Godkendelsesblad. systemer
Dansk Standard DS/ISO/IEC 14754 Godkendelsesblad 1. udgave Godkendt:1999-12-07 Informationsteknologi. Penbaserede grænseflader. Fælles tegn for tekstredigering i penbaserede systemer Information Techonology
Læs mereTeknisk tegning Almene tegneregler Del 25: Linjer på skibsbygningstegninger
Dansk Standard DS/ISO 128-25 1. udgave 2001-12-06 Teknisk tegning Almene tegneregler Del 25: Linjer på skibsbygningstegninger Technical drawings General principles of presentation Part 25: Lines on shipbuilding
Læs mereInformationsteknologi Multimedierammestruktur
Dansk standard Tillæg DS/ISO/IEC 21000-5/Amd. 2 1. udgave 2007-12-03 Informationsteknologi Multimedierammestruktur (MPEG-21) Del 5: Sprog til definition af rettigheder Tillæg 2: DACprofil(Dissemination
Læs mereTeknisk tegning Almene tegneregler Del 50: Grundlæggende regler for angivelse af områder på snitafbildninger og snit
Dansk Standard DS/ISO 128-50 1. udgave 2002-05-21 Teknisk tegning Almene tegneregler Del 50: Grundlæggende regler for angivelse af områder på snitafbildninger og snit Technical drawings General principles
Læs mereInformationsteknologi Skærmikoner og -symboler til personligt, mobilt kommunikationsudstyr
Dansk standard DS/ISO/IEC 24755 1. udgave 2008-01-16 Informationsteknologi Skærmikoner og -symboler til personligt, mobilt kommunikationsudstyr Information technology Screen icons and symbols for personal
Læs mereRulningslejer Tryklejer Grænsedimensioner,
Dansk standard DS/ISO 104:2015 1. udgave 2015-12-16 Rulningslejer Tryklejer Grænsedimensioner, overordnet plan Rolling bearings Thrust bearings Boundary dimensions, general plan DS/ISO 104:2015 København
Læs mereInformationsteknologi Identifikation og styring af mobile enheder Del 1: Protokol for mobil RFID-læser for ISO/IEC 18000-6, type C
Dansk standard DS/ISO/IEC 29173-1 1. udgave 2012-12-20 Informationsteknologi Identifikation og styring af mobile enheder Del 1: Protokol for mobil RFID-læser for ISO/IEC 18000-6, type C Information technology
Læs mereDansk Standard DS/EN 61595-3 1. udgave. COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN 61595-3:2001
Dansk Standard DS/EN 61595-3 1. udgave Godkendt:2001-05-18 Digitalt lydbåndoptagersystem med flere kanaler (DATR), spoletil-spolesystem, til professionelt brug Del 3: 24-bits funktion til 16-bits medier
Læs mereMekaniske vibrationer Vurdering af maskinvibrationer ved måling på ikkeroterende dele Del 1: Generelle retningslinjer
Dansk standard Tillæg DS/ISO 10816-1/Amd 1 1. udgave 2014-08-14 Mekaniske vibrationer Vurdering af maskinvibrationer ved måling på ikkeroterende dele Del 1: Generelle retningslinjer Mechanical vibration
Læs mereJordbrug Traktorer Bagmonteret trepunktsophæng Kategori 1N, 1, 2N, 2, 3N, 3, 4N og 4
Dansk standard DS/ISO 730 1. udgave 2009-02-10 Jordbrug Traktorer Bagmonteret trepunktsophæng Kategori 1N, 1, 2N, 2, 3N, 3, 4N og 4 Agricultural wheeled tractors Rear-mounted three-point linkage Categories
Læs mereInformationsteknologi Sikkerhedsteknikker Vejledning i auditering af informationssikkerhedskontroller
DS-information DS/ISO/IEC TR 27008 1. udgave 2011-10-28 Informationsteknologi Sikkerhedsteknikker Vejledning i auditering af informationssikkerhedskontroller Information technology Security techniques
Læs mereKoniske forbindelser med 6 % (Luer) studs for sprøjter, kanyler og andet særligt medicinsk udstyr Låsbare forbindelser
Dansk standard DS/ISO 594-2 1. udgave 1992-01-21 Koniske forbindelser med 6 % (Luer) studs for sprøjter, kanyler og andet særligt medicinsk udstyr Låsbare forbindelser Conical fittings with a 6% (Luer)
Læs mereElektronisk dokumentstyring Ordliste Del 1: Elektronisk billeddannelse af dokumenter
Dansk standard DS/ISO 12651-1 2. udgave 2012-02-29 Elektronisk dokumentstyring Ordliste Del 1: Elektronisk billeddannelse af dokumenter Electronic document management Vocabulary Part 1: Electronic document
Læs mereFoderstoffer. Bestemmelse af fedtindhold
Dansk Standard DS/ISO 6492 1. udgave Godkendt:1999-09-13 Foderstoffer. Bestemmelse af fedtindhold Animal feeding stuffs - Determination of fat content DANSK STANDARD - Eftertryk uden tilladelse forbudt
Læs mereOptik og optiske instrumenter Medicinske endoskoper og endoskopitilbehør Del 3: Bestemmelse af synsfelt og synsretning for endoskoper med optik
Dansk standard DS/ISO 8600-3:1997 1. udgave 2015-10-15 Optik og optiske instrumenter Medicinske endoskoper og endoskopitilbehør Del 3: Bestemmelse af synsfelt og synsretning for endoskoper med optik Optics
Læs mereTeknisk tegning Almene tegneregler Del 40: Grundlæggende regler for snitafbildninger og snit
Dansk Standard DS/ISO 128-40 1. udgave 2002-05-21 Teknisk tegning Almene tegneregler Del 40: Grundlæggende regler for snitafbildninger og snit Technical drawings General principles of presentation Part
Læs mereStøj fra værktøjsmaskiner Driftsbetingelser for metalskæremaskiner
Dansk standard DS/ISO 8525 1. udgave 2008-06-18 Støj fra værktøjsmaskiner Driftsbetingelser for metalskæremaskiner Airborne noise emitted by machine tools Operating conditions for metal-cutting machines
Læs mereMaskinsikkerhed Risikovurdering Del 2: Praktisk vejledning og metodeeksempler
DS-information DS/ISO/TR 14121-2 2. udgave 2012-07-04 Maskinsikkerhed Risikovurdering Del 2: Praktisk vejledning og metodeeksempler Safety of machinery Risk assessment Part 2: Practical guidance and examples
Læs mereTrykluft Del 3: Prøvningsmetoder til måling af fugtighed
Dansk Standard DS/ISO 8573-3 1. udgave Godkendt:2001-03-01 Trykluft Del 3: Prøvningsmetoder til måling af fugtighed Compressed air Part 3: Test methods for measurement of humidity DANSK STANDARD - Eftertryk
Læs mereInformationsteknologi Sikkerhedsteknikker Processer for sårbarhedshåndtering
Dansk standard DS/ISO/IEC 30111 1. udgave 2013-12-02 Informationsteknologi Sikkerhedsteknikker Processer for sårbarhedshåndtering Information technology Security techniques Vulnerability handling processes
Læs mereInformationsteknologi Automatisk identifikation og datafangstteknikker Kode 128 stregkode symbologispecifikation
Dansk standard DS/ISO/IEC 15417 2. udgave 2007-06-18 Informationsteknologi Automatisk identifikation og datafangstteknikker Kode 128 stregkode symbologispecifikation Information technology Automatic identification
Læs mereCompressed air Part 1: Contaminants and purity classes
Dansk standard DS/ISO 8573-1 2. udgave 2010-05-20 Trykluft Del 1: Kontaminanter og renhedsklasser Compressed air Part 1: Contaminants and purity classes DS/ISO 8573-1 København DS projekt: M247943 ICS:
Læs mereSoftware- og systemudvikling Højniveau-petrinet Del 1: Begreber, definitioner og grafiske tegnesystemer
Dansk standard Tillæg DS/ISO/IEC 15909-1/Amd 1 1. udgave 2010-06-21 Software- og systemudvikling Højniveau-petrinet Del 1: Begreber, definitioner og grafiske tegnesystemer Software and system engineering
Læs mereMotorkøretøjer Fartskriversystemer Del 2: Elektrisk grænseflade med optageenhed
Dansk standard DS/ISO 16844-2 1. udgave 2011-04-08 Motorkøretøjer Fartskriversystemer Del 2: Elektrisk grænseflade med optageenhed Road vehicles Tachograph systems Part 2: Electrical interface with recording
Læs mereMarksprøjter Sprøjtedyser Farvekode til identifikation
Dansk standard DS/ISO 10625 2. udgave 2005-08-19 Marksprøjter Sprøjtedyser Farvekode til identifikation Equipment for crop protection Sprayer nozzles Colour coding for identification DS/ISO 10625 København
Læs mereSikkerhed for forlystelser og forlystelsesudstyr Del 3: Krav om eftersyn ved konstruktion, fremstilling, drift og brug
Dansk standard DS/ISO 17842-3:2015 1. udgave 2015-08-06 Sikkerhed for forlystelser og forlystelsesudstyr Del 3: Krav om eftersyn ved konstruktion, fremstilling, drift og brug Safety of amusement rides
Læs mereArbejdsmiljøledelsessystemer Kravbeskrivelse
Dansk standard DS/OHSAS 18001 2. udgave 2008-01-14 Arbejdsmiljøledelsessystemer Kravbeskrivelse Occupational health and safety management systems Specification DS/OHSAS 18001 København DS projekt: M224197
Læs mereVarmtvandspumper Prøvning og ydeevneangivelse Del 2: Vand-til-vand- og saltvandtil-vand-varmepumper
Dansk Standard DS/ISO 13256-2 1. udgave 2002-06-20 Varmtvandspumper Prøvning og ydeevneangivelse Del 2: Vand-til-vand- og saltvandtil-vand-varmepumper Water-source heat pumps Testing and rating for performance
Læs mereIdentifikationskort Kort med integrerede kredse Del 6: Interindustrielle dataelementer
Dansk standard Rettelsesblad DS/ISO/IEC 7816-6/Corr. 1 1. udgave 2006-11-30 Identifikationskort Kort med integrerede kredse Del 6: Interindustrielle dataelementer Identification cards Integrated circuit
Læs mereIdentifikationskort Integrerede kredsløb Del 11: Personlig verifikation gennem biometrisk metode
Dansk standard DS/ISO/IEC 7816-11 1. udgave 2004-06-02 Identifikationskort Integrerede kredsløb Del 11: Personlig verifikation gennem biometrisk metode Identification cards Integrated circuit cards Part
Læs mereMiljømærkning Egendeklaration af miljøpåstande (Type II miljømærkning)
Dansk standard Tillæg DS/EN ISO 14021/A1 1. udgave 2012-02-08 Miljømærkning Egendeklaration af miljøpåstande (Type II miljømærkning) Environmental labels and declarations Self-declared environmental claims
Læs mereTeknisk tegning Grafiske skemasymboler Del 1: Generel information og overordnede indekser
Dansk standard DS/ISO 14617-1 1. udgave 2006-02-22 Teknisk tegning Grafiske skemasymboler Del 1: Generel information og overordnede indekser Graphical symbols for diagrams Part 1: General information and
Læs mereInformationsteknologi Sikkerhedsteknikker Virkemåder for en n-bit blokalgoritme
Dansk standard DS/ISO/IEC 10116 2. udgave 2007-06-18 Informationsteknologi Sikkerhedsteknikker Virkemåder for en n-bit blokalgoritme Information technology Security techniques Modes of operation for an
Læs mereSystem- og softwareudvikling Kvalitetskrav til og evaluering af systemer og software (SQuaRE) Planlægning og ledelse
Dansk standard DS/ISO/IEC 25001 2. udgave 2014-03-19 System- og softwareudvikling Kvalitetskrav til og evaluering af systemer og software (SQuaRE) Planlægning og ledelse Systems and software engineering
Læs mereCOPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/ISO/IEC /Amd. 1: CD-rom
Dansk standard Tillæg DS/ISO/IEC 23001-1/Amd. 1 + CD-rom 1. udgave 2007-11-29 Informationsteknologi MPEGsystemteknologier Del 1: Binært MPEG-format til XML Information technology MPEG systems technologies
Læs mereInformationsteknologi Multimedieanvendelsesformat (MPEG-A) Del 2: Anvendelsesformat for MPEGmusikafspiller
Dansk standard DS/ISO/IEC 23000-2 CD-rom 1. udgave 2008-03-07 Informationsteknologi Multimedieanvendelsesformat (MPEG-A) Del 2: Anvendelsesformat for MPEGmusikafspiller Information technology Multimedia
Læs mereHjælpemidler til blinde og svagsynede personer Taktile indikatorer på fodgængerarealer
Dansk standard DS/ISO 23599 1. udgave 2012-04-03 Hjælpemidler til blinde og svagsynede personer Taktile indikatorer på fodgængerarealer Assistive products for blind and visionimpaired persons Tactile walking
Læs mereArbejdsmiljøledelsessystemer Vejledning i implementering af OHSAS 18001:2007
Dansk standard DS/OHSAS 18002 2. udgave 2009-08-07 Arbejdsmiljøledelsessystemer Vejledning i implementering af OHSAS 18001:2007 Occupational health and safety management systems Guidelines for the implementation
Læs mereCOPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/ISO/IEC 13818-6/Amd.2:2000
Dansk Standard Tillæg DS/ISO/IEC 13818-6/Amd.2 1. udgave Godkendt:2000-08-29 Informationsteknologi Generisk kodning af levende billeder og tilhørende lydinformation Del 6: Udvidelser til DSM-CC Tillæg
Læs mereInformationsteknologi Kodning af av-objekter Del 4: Overensstemmelsesprøvning
Dansk standard Rettelsesblad DS/ISO/IEC 14496-4/Corr. 3 + CD-rom 1. udgave 2007-11-22 Informationsteknologi Kodning af av-objekter Del 4: Overensstemmelsesprøvning Information technology Coding of audio-visual
Læs mereSkibs- og marineteknologi Liste over maritime standarder
Dansk standard DS/ISO 15583 1. udgave 2005-07-14 Skibs- og marineteknologi Liste over maritime standarder Ships and marine technology Maritime standards list DS/ISO 15583 København DS projekt: M205531
Læs mereSoftware- og systemudvikling Referencemodel for produktlinjeudvikling og -styring
Dansk standard DS/ISO/IEC 26550 1. udgave 2013-09-26 Software- og systemudvikling Referencemodel for produktlinjeudvikling og -styring Software and systems engineering Reference model for product line
Læs mereOptik og optiske instrumenter Medicinske endoskoper og endoskopitilbehør Del 5: Bestemmelse af optisk opløsning af stive endoskoper med optik
Dansk standard DS/ISO 8600-5:2005 1. udgave 2015-10-15 Optik og optiske instrumenter Medicinske endoskoper og endoskopitilbehør Del 5: Bestemmelse af optisk opløsning af stive endoskoper med optik Optics
Læs mereKrydderier og smagsstoffer Botanisk nomenklatur
Dansk standard DS/EN ISO 676 1. udgave 2009-07-23 Krydderier og smagsstoffer Botanisk nomenklatur Spices and condiments Botanical nomenclature DS/EN ISO 676 København DS projekt: M230052 ICS: 01.040.67;
Læs mereKirurgiske implantater Intramedullære
Dansk standard DS/ISO 15142-2:2003 1. udgave 2015-09-15 Kirurgiske implantater Intramedullære sømsystemer af metal Del 2: Låsekomponenter Implants for surgery Metal intramedullary nailing systems Part
Læs mereInformationsteknologi Procesvurdering Krav til procesvurdering
Dansk standard DS/ISO/IEC 33002:2015 1. udgave 2015-03-09 Informationsteknologi Procesvurdering Krav til procesvurdering Information technology Process assessment Requirements for performing process assessment
Læs mereInformationsteknologi Sikkerhedsteknikker Informationssikkerhed Risikoledelse
Dansk standard DS/ISO/IEC 27005 2. udgave 2011-06-01 Informationsteknologi Sikkerhedsteknikker Informationssikkerhed Risikoledelse Information technology Security techniques Information security risk management
Læs mereInformationsteknologi Sikkerhedsteknikker. Del 2: Hashfunktioner, der anvender n-bit blokchiffer
Dansk standard DS/ISO 10118-2 3. udgave 2010-11-10 Informationsteknologi Sikkerhedsteknikker Hashfunktioner Del 2: Hashfunktioner, der anvender n-bit blokchiffer Information technology Security techniques
Læs mereMotorcykler Målemetode for gasformige udstødningsemissioner og brændstofforbrug Del 2: Prøvningscyklusser og specifikke prøvningsbetingelser
Dansk standard DS/ISO 6460-2:2015 1. udgave 2015-01-09 Motorcykler Målemetode for gasformige udstødningsemissioner og brændstofforbrug Del 2: Prøvningscyklusser og specifikke prøvningsbetingelser Motorcycles
Læs mereTekniske specifikationer for centrifugalpumper Klasse III
Dansk standard Tillæg DS/EN ISO 9908/A1 1. udgave 2011-06-08 Tekniske specifikationer for centrifugalpumper Klasse III Technical specifications for centrifugal pumps Class III Amendment 1 DS/EN ISO 9908/A1
Læs mereSensorisk analyse Retningslinjer for brug af kvantitative responsskalaer
Dansk standard DS/ISO 4121 1. udgave 2003-12-19 Sensorisk analyse Retningslinjer for brug af kvantitative responsskalaer Sensory analysis Guidelines for the use of quantitative response scales DS/ISO 4121
Læs mereMarkeds-, opinions- og samfundsundersøgelser
Dansk standard DS/ISO 20252 2. udgave 2012-07-05 Markeds-, opinions- og samfundsundersøgelser Ordliste og servicekrav Market, opinion and social research Vocabulary and service requirements DS/ISO 20252
Læs mereDansk standard DS/EN ISO udgave Campingtelte. Camping tents
Dansk standard DS/EN ISO 5912 2. udgave 2011-11-22 Campingtelte Camping tents DS/EN ISO 5912 København DS projekt: M245636 ICS: 97.200.30 Første del af denne publikations betegnelse er: DS/EN ISO, hvilket
Læs merePolybuten-1-rør (PB-1-rør) Virkning af tid og temperatur på den forventede styrke
Dansk standard DS/ISO 12230 1. udgave 2012-08-21 Polybuten-1-rør (PB-1-rør) Virkning af tid og temperatur på den forventede styrke Polybutene-1 (PB-1) pipes Effect of time and temperature on the expected
Læs mereCOPYRIGHT Danish Standards Foundation. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/ISO/IEC TS :2013
DS-information DS/ISO/IEC TS 17021-3 1. udgave 2013-05-27 Overensstemmelsesvurdering Krav til organer, der foretager audit og certificering af ledelsessystemer Del 3: Kompetencekrav til auditering og certificering
Læs mereReaction-to-fire tests Guidance on the choice of substrates for building and transport products
Dansk standard DS/ISO 14697 1. udgave 2007-08-20 Prøvning for reaktion på brand Vejledning i valg af underlag til byggevarer og transportprodukter Reaction-to-fire tests Guidance on the choice of substrates
Læs mereKosmetik Analytiske metoder Valideringskriterier for analytiske resultater ved brug af kromatografiske
Dansk standard DS/ISO 12787 1. udgave 2012-02-02 Kosmetik Analytiske metoder Valideringskriterier for analytiske resultater ved brug af kromatografiske teknikker Cosmetics Analytical methods Validation
Læs mereInformationsteknologi 8-bit-kodede grafiske tegnsæt Del 7: Latinsk/græsk alfabet
Dansk standard DS/ISO/IEC 8859-7 1. udgave 2007-04-26 Informationsteknologi 8-bit-kodede grafiske tegnsæt Del 7: Latinsk/græsk alfabet Information technology 8-bit single-byte coded graphic character sets
Læs mereInformationsteknologi Sikkerhedsteknikker. informationssikkerhed Oversigt og ordliste
Dansk standard DS/ISO/IEC 27000 2. udgave 2013-01-24 Informationsteknologi Sikkerhedsteknikker Ledelsessystemer for informationssikkerhed Oversigt og ordliste Information technology Security techniques
Læs mereKød og kødprodukter. Måling af ph-værdi. Referencemetode
Dansk Standard DS/ISO 2917 1. udgave Godkendt:2000-04-27 Kød og kødprodukter. Måling af ph-værdi. Referencemetode Meat and meat products - Measurement of ph - Reference method DANSK STANDARD - Eftertryk
Læs mereKirurgiske implantater Hydroxyapatit Del 2: Belægninger af hydroxyapatit
Dansk standard DS/ISO 13779-2:2014 1. udgave 2014-12-18 Kirurgiske implantater Hydroxyapatit Del 2: Belægninger af hydroxyapatit Implants for surgery Hydroxyapatite Part 2: Coatings of hydroxyapatite DS/ISO
Læs mereInformationsteknologi Universelt fleroktet kodet tegnsæt (UCS) Tillæg 2: N'Ko, Phags-pa, fønikiske og andre tegn
Dansk standard Tillæg DS/ISO/IEC 10646/Amd 2 1. udgave 2007-08-01 Informationsteknologi Universelt fleroktet kodet tegnsæt (UCS) Tillæg 2: N'Ko, Phags-pa, fønikiske og andre tegn Information technology
Læs mereInformationsteknologi Sikkerhedsteknikker Applikationssikkerhed Del 1: Oversigt og begreber
Dansk standard Rettelsesblad DS/ISO/IEC 27034-1/Cor 1 1. udgave 2014-01-30 Informationsteknologi Sikkerhedsteknikker Applikationssikkerhed Del 1: Oversigt og begreber Information technology Security techniques
Læs mereInformationsteknologi Informationsudveksling
Dansk standard Rettelsesblad DS/ISO/IEC 9541-4/Corr. 1 1. udgave 2009-12-10 Informationsteknologi Informationsudveksling om fonte og tegn Del 4: Harmonisering til åbent skriftformat Information technology
Læs mereLandbrugstraktorer Krav, prøvningsprocedurer
Dansk standard DS/ISO 5721-1 1. udgave 2013-07-22 Landbrugstraktorer Krav, prøvningsprocedurer og acceptkriterier for førerens synsfelt Del 1: Fremadrettet synsfelt Agricultural tractors Requirements,
Læs mereFyldte injektionssprøjter Del 6: Plastkamre til injektionspræparater
Dansk standard DS/ISO 11040-6 1. udgave 2012-05-15 Fyldte injektionssprøjter Del 6: Plastkamre til injektionspræparater Prefilled syringes Part 6: Plastic barrels for injectables DS/ISO 11040-6 København
Læs mereSensorisk analyse Metodologi Sekventiel analyse
Dansk standard DS/ISO 16820 1. udgave 2004-07-28 Sensorisk analyse Metodologi Sekventiel analyse Sensory analysis Methodology Sequential analysis DS/ISO 16820 København DS projekt: 49367 ICS: 67.240 Deskriptorer:
Læs mereBeholdere og tilbehør til farmaceutiske præparater Del 7: Hætteglas med skruelåg fremstillet af glasrør til flydende doseringsformer
Dansk standard DS/ISO 11418-7 1. udgave 2014-05-09 Beholdere og tilbehør til farmaceutiske præparater Del 7: Hætteglas med skruelåg fremstillet af glasrør til flydende doseringsformer Containers and accessories
Læs mereInformationsteknologi Datamatgrafik Metafil til lagring og overførsel af billedbeskrivelsesinformation Del 1: Funktionel beskrivelse
Dansk standard Rettelsesblad DS/ISO/IEC 8632-1/Corr. 2 1. udgave 2007-11-20 Informationsteknologi Datamatgrafik Metafil til lagring og overførsel af billedbeskrivelsesinformation Del 1: Funktionel beskrivelse
Læs mereKirurgiske implantater Intramedullære
Dansk standard DS/ISO 15142-1:2003 1. udgave 2015-09-15 Kirurgiske implantater Intramedullære sømsystemer af metal Del 1: Intramedullære søm Implants for surgery Metal intramedullary nailing systems Part
Læs mereIdentifikationskort Kontaktløse kort med integrerede kredse Kort til læsning på kort afstand Del 3: Antikollision og transmissionsprotokol
Dansk standard Tillæg DS/ISO/IEC 15693-3:2009/ Amd 3:2015 1. udgave 2015-06-24 Identifikationskort Kontaktløse kort med integrerede kredse Kort til læsning på kort afstand Del 3: Antikollision og transmissionsprotokol
Læs mereIndendørsluft Del 18: Påvisning og antalsbestemmelse af skimmelsvampe Prøvetagning ved impaktion
Dansk standard Rettelsesblad DS/ISO 16000-18/Cor. 1 1. udgave 2012-01-18 Indendørsluft Del 18: Påvisning og antalsbestemmelse af skimmelsvampe Prøvetagning ved impaktion Indoor air Part 18: Detection and
Læs mereMalinger og lakker Bestemmelse af bestandighed mod cykliske korrosionsbetingelser Del 1: Vådt (salttåge)/tørt/fugtigt
Dansk standard DS/EN ISO 11997-1 1. udgave 2006-03-06 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 11997-1:2006 Malinger og lakker Bestemmelse af bestandighed mod cykliske
Læs mereSundhedsinformatik Sundhedskort Nummereringssystem og registreringsprocedure for identifikation af udsteder
Dansk standard DS/ISO 20302 1. udgave 2014-03-20 Sundhedsinformatik Sundhedskort Nummereringssystem og registreringsprocedure for identifikation af udsteder Health informatics Health cards Numbering system
Læs mereSundhedsinformatik Sundhedskort Generelle karakteristika
Dansk standard DS/ISO 20301 2. udgave 2014-01-23 Sundhedsinformatik Sundhedskort Generelle karakteristika Health informatics Health cards General characteristics DS/ISO 20301 København DS projekt: M264867
Læs mereInformationsteknologi Procesvurdering Begreber og terminologi
Dansk standard DS/ISO/IEC 33001:2015 1. udgave 2015-03-09 Informationsteknologi Procesvurdering Begreber og terminologi Information technology Process assessment Concepts and terminology DS/ISO/IEC 33001:2015
Læs mereHjælpemidler til stomi og inkontinens Udskylningssæt Krav og prøvningsmetoder
Dansk standard DS/ISO 16391 1. udgave 2002-11-28 Hjælpemidler til stomi og inkontinens Udskylningssæt Krav og prøvningsmetoder Aids for ostomy and incontinence Irrigation sets Requirements and test methods
Læs mereTermisk solenergi Vandvarmere Elastomere materialer til absorbere, rørforbindelser og fittings Vurderingsmetode
Dansk standard DS/ISO 9808 1. udgave 2012-08-28 Termisk solenergi Vandvarmere Elastomere materialer til absorbere, rørforbindelser og fittings Vurderingsmetode Solar water heaters Elastomeric materials
Læs mereVejledning i projektledelse
Dansk standard DS/ISO 21500 1. udgave 2012-09-27 Vejledning i projektledelse Guidance on project management DS/ISO 21500 København DS projekt: M251575 ICS: 03.100.40 Første del af denne publikations betegnelse
Læs mere