COPYRIGHT Danish Standards Foundation. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN 16129:2013
|
|
- Karina Møller
- 5 år siden
- Visninger:
Transkript
1 Dansk standard DS/EN udgave Trykregulatorer, automatisk omskifterudstyr med maksimalt reguleret tryk på 4 bar, med maksimal kapacitet på 150 kg/h, tilknyttet sikkerhedsudstyr og adaptere til butan, propan og blandinger heraf Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
2 DS/EN København DS projekt: M ICS: Første del af denne publikations betegnelse er: DS/EN, hvilket betyder, at det er en europæisk standard, der har status som dansk standard. Denne publikations overensstemmelse er: IDT med: EN 16129:2013. DS-publikationen er på engelsk. Denne publikation erstatter: DS/EN A1:2009, DS/EN A1:2008, DS/EN 12864:2002, DS/EN 12864/A1:2003, DS/EN 12864/A2:2005 og DS/EN 12864/A3:2009. DS-publikationstyper Dansk Standard udgiver forskellige publikationstyper. Typen på denne publikation fremgår af forsiden. Der kan være tale om: Dansk standard standard, der er udarbejdet på nationalt niveau, eller som er baseret på et andet lands nationale standard, eller standard, der er udarbejdet på internationalt og/eller europæisk niveau, og som har fået status som dansk standard DS-information publikation, der er udarbejdet på nationalt niveau, og som ikke har opnået status som standard, eller publikation, der er udarbejdet på internationalt og/eller europæisk niveau, og som ikke har fået status som standard, fx en teknisk rapport, eller europæisk præstandard DS-håndbog samling af standarder, eventuelt suppleret med informativt materiale DS-hæfte publikation med informativt materiale Til disse publikationstyper kan endvidere udgives tillæg og rettelsesblade DS-publikationsform Publikationstyperne udgives i forskellig form som henholdsvis fuldtekstpublikation (publikationen er trykt i sin helhed) godkendelsesblad (publikationen leveres i kopi med et trykt DS-omslag) elektronisk (publikationen leveres på et elektronisk medie) DS-betegnelse Alle DS-publikationers betegnelse begynder med DS efterfulgt af et eller flere præfikser og et nr., fx DS 383, DS/EN 5414 osv. Hvis der efter nr. er angivet et A eller Cor, betyder det, enten at det er et tillæg eller et rettelsesblad til hovedstandarden, eller at det er indført i hovedstandarden. DS-betegnelse angives på forsiden. Overensstemmelse med anden publikation: Overensstemmelse kan enten være IDT, EQV, NEQ eller MOD IDT: Når publikationen er identisk med en given publikation. EQV: Når publikationen teknisk er i overensstemmelse med en given publikation, men præsentationen er ændret. NEQ: Når publikationen teknisk eller præsentationsmæssigt ikke er i overensstemmelse med en given standard, men udarbejdet på baggrund af denne. MOD: Når publikationen er modificeret i forhold til en given publikation.
3 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN June 2013 ICS English Version Supersedes EN 12864:2001, EN 13785:2005+A1:2008, EN 13786:2004+A1:2008 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures Détendeurs, inverseurs automatiques, ayant une pression maximum de détente de 4 bar, avec une capacité maximale de 150 kg/h, dispositifs de sécurité associés et adaptateurs pour butane, propane et leurs mélanges This European Standard was approved by CEN on 9 March Druckregelgeräte, automatische Umschaltanlagen mit einem höchstem Ausgangsdruck bis einschließlich 4 bar und einem maximalen Durchfluss von 150 kg/h sowie die dazugehörigen Sicherheitseinrichtungen und Übergangsstücke für Butan, Propan und deren Gemische CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16129:2013: E
4 Contents Page Foreword Scope Normative references Terms and definitions General terms and definitions Terms and definitions concerning gas Terms and definitions concerning pressures Terms and definitions concerning flow rates Types of regulating devices Introduction Regulating device with a nominal regulated pressure specified by EN Other regulating devices Constructional characteristics General Materials Special requirements Pressure sensing subassembly (regulating devices only) Regulation subassembly (regulating devices only) Back pressure subassembly (regulating devices only) Connection subassembly Change over devices Mechanical strength Resistance to impact Resistance to pressure Strength of connections Soundness Mechanical endurance Regulators Automatic change over devices Devices fitted with a manual closing device Quick coupling device Device with freely rotating outlet connection Resistance to humidity changes Resistance to corrosion Performance characteristics General Regulators Supply and regulated pressures for regulators to be used on installations where the final pressure is to EN Supply and regulated pressures for fixed or adjustable regulators to be used on installations where the final pressure is not to EN Variable regulators Automatic change over devices Supply and regulated pressures for automatic change over devices to be used on installations where the final pressure is to EN Supply and regulated pressures for fixed or adjustable automatic change over devices to be used on installations where the final pressure is not to EN Automatic change over device with integral variable regulator Change over pressure Adaptors
5 7 Test methods General conditions Type of test gas Test conditions Equivalence formulas Test samples Verification of constructional characteristics Resistance to impact Resistance to pressure Mechanical strength of connections Valve pad retention Soundness Mechanical endurance Resistance to humidity changes Resistance to corrosion Verification of performance characteristics General Plotting of the performance curves for regulating devices Performances of adaptors Verification of first stage pressure for G.56 connection regulating devices Soundness of the non return valve Marking, packaging, instructions General Marking of the device Packaging Instructions for installation, use and maintenance Annex A (normative) Special requirements for devices fitted with pressure or flow rate operated safety functions A.1 Regulating devices fitted with an over-pressure relief valve of a limited flow rate (PRV) A.1.1 Definition A.1.2 Constructional characteristics A.1.3 Performance characteristics A.1.4 Test methods A.1.5 Regulating device marking A.1.6 Instructions A.2 Regulating devices fitted with an over-pressure shut off safety device (OPSO) A.2.1 Definition A.2.2 Constructional characteristics A.2.3 Performance characteristics A.2.4 Test methods A.2.5 Regulating device marking A.2.6 Instructions A.3 Regulating devices fitted with an under-pressure shut off safety device (UPSO) A.3.1 Definition A.3.2 Constructional and performance characteristics A.3.3 Test methods A.3.4 Regulating device marking A.3.5 Instructions A.4 Regulating devices fitted with an excess flow valve (EFV) A.4.1 Definition A.4.2 Performance characteristics A.4.3 Test methods A.4.4 Regulating device marking A.4.5 Instructions A.5 Regulating devices fitted with a regulated outlet pressure limiter A.5.1 Definition A.5.2 Constructional and performance characteristics A.5.3 Test method
6 A.5.4 Marking A.5.5 Instructions A.6 Two stage pressure limiting regulating device A.6.1 Description A.6.2 Constructional and performance characteristics A.6.3 Test methods A.6.4 Marking A.6.5 Instructions A.7 Additional diaphragm A.7.1 Description A.7.2 Constructional and performance characteristics A.7.3 Performance characteristics A.7.4 Test methods A.7.5 Marking A.7.6 Instructions Annex B (normative) Special requirements for devices fitted with a thermal shut off system B.1 Thermal shut off valve B.1.1 Definition B.1.2 Constructional characteristics B.1.3 Performance characteristics B.1.4 Test methods B.1.5 Marking B.1.6 Instructions B.2 Thermal spindle on devices for self closing valve connection B.2.1 Definition B.2.2 Constructional characteristics B.2.3 Performance characteristics B.2.4 Test methods B.2.5 Marking B.2.6 Instructions Annex C (normative) Special requirements for devices under extreme temperature conditions (temperatures below -20 C) C.1 Scope C.2 Requirements C.2.1 Material C.2.2 Extreme temperature test C.3 Conditioning C.4 Marking C.5 Instructions Annex D (normative) Regulating devices for gas cylinders to supply appliances installed in caravans, motor caravans or freshwater boats D.1 Scope D.2 Installations and connections D.3 Pressures and flow rate D.4 Pressure safety functions D.5 Automatic change over system ("kit") D.6 Resistance to vibration D.7 Marking D.8 Instructions Annex E (normative) Complementary test requirements for non-metallic thermoplastic or thermal setting materials used in the construction of devices E.1 Scope E.2 Materials E.3 Special requirements E.3.1 Accelerated ageing E.3.2 Resistance to hydrocarbons E.3.3 Resistance to cracking under stress and when chemical agents are present
7 E.3.4 Characteristics relating to fire resistance E.4 Special conditions for carrying out the tests mentioned in the body of the standard E.4.1 Resistance to impact (see and 7.2.1) E.4.2 Mechanical resistance of connections (see and 7.2.3) E.4.3 Soundness (see 5.5 and 7.2.5) E.5 Sampling and order of tests Annex F (normative) Requirements for elastomeric reinforced diaphragms Annex G (normative) Inlet connections Annex H (normative) Outlet connections Annex I (informative) Test method for resistance to corrosion I.1 Principle I.2 Reagents I.2.1 Saline solution I.2.2 Compressed air I.2.3 Salt mist I.3 Apparatus I.4 Test method I.4.1 Method of exposure of devices I.4.2 Duration of tests I.4.3 Checks I.4.4 Cleaning of devices I.5 Results Annex J (informative) Method for measuring leaks J.1 Scope J.2 Diagram of the test bench J.3 Coefficient K J.3.1 Method J.3.2 Calculations J.4 Measurement of the leak J.4.1 Method J.4.2 Calculations J.5 Checks Annex K (normative) Special requirements for low pressure fixed regulators fitted with two or three outlets for outdoor use K.1 Scope K.2 Constructional characteristics K.3 Performance characteristics K.4 Test methods K.4.1 Test on the shut off devices K.4.2 Performance test K.5 Marking K.6 Instructions Annex L (normative) Special requirements for regulators fitted with an inlet valve L.1 Scope L.2 Definition L.3 Constructional characteristics L.4 Performance characteristics : mechanical strength L.5 Test methods Annex M (normative) Devices for gas cylinders to supply appliances installed in seawater boats M.1 Scope M.2 General M.3 Maximum guaranteed flow rate M.4 Regulating devices fitted with a pressure relief valve M.5 Vent M.6 Connections
8 M.7 Material M.8 Corrosion M.8.1 General M.8.2 Corrosion requirement M.8.3 Corrosion test method M.9 Marking M.10 Instructions for use and maintenance Annex N (normative) Alternative possible seal N.1 Scope N.2 Dimensions N.3 Materials N.4 Markings Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2009/142/EC (for pressure regulators only) Bibliography
9 Foreword This document (EN 16129:2013) has been prepared by Technical Committee CEN/TC 181 Dedicated liquefied petroleum gas appliances, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2013, and conflicting national standards shall be withdrawn at the latest by December Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12864:2001, EN 13786:2004+A1:2008 and EN 13785:2005+A1:2008. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. The main technical changes that have been made since the latest edition are as follows: the merging of EN 12864, EN and EN and their amendments; the extension of the scope to adaptors; the addition of requirements for taking into account pressure loses of gas installations; the removal from this standard of drawing of connections described in other standards; the improvement of testing methods; additional corrections. Change-over devices and adaptors within the scope of this standard, are not covered by the EU Directive for gas appliances (2009/142/EC). Items relating to quality assurance systems, production testing and particularly certificates of conformity are not covered in this standard. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. 7
10 1 Scope This European Standard defines the constructional and operational characteristics, the safety requirements, test methods and the marking of regulators and automatic change-over devices having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, for use with butane, propane and their mixtures in the vapour phase. This European Standard also applies to the safety devices which are included within regulating devices covered by this standard. The characteristics of these safety devices are given in Annexes A and B. This European Standard also includes the requirements for: adaptors for connecting to self closing valves; auxiliary safety devices. For the purpose of this European Standard: regulators and automatic change-over devices are referred to as "regulating devices"; regulators, automatic change-over devices and adaptors are referred to as "devices". The requirements apply to devices used in locations where the temperature likely to be reached during use is between -20 C and +50 C. Additional requirements for devices to be used at temperatures below 20 C are given in Annex C. Additional requirements for regulating devices intended to be used in caravans, motor caravans and freshwater boats are given in Annex D. Additional requirements for regulating devices intended to be used in seawater boats are given in Annex M. For specific use in caravans motor caravans and boats (freshwater and seawater), the automatic change over device function may also be carried out by an assembly of regulators, forming an "automatic change over device system" as defined in For installation rules of devices and their possible associated safety devices, reference should be made to national regulations in force in the member countries. All connections and the countries in which they are used are given in Annexes G and H. This European Standard defines only specific connections which are not defined in other standards (e.g. EN for cylinder valve connections). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 437, Test gases Test pressures Appliances categories EN 521, Specifications for dedicated liquefied petroleum gas appliances Portable vapour pressure liquefied petroleum gas appliances EN 549, Rubber materials for seals and diaphragms for gas appliances and gas equipment EN 560, Gas welding equipment Hose connections for equipment for welding, cutting and allied processes 8
11 EN 561, Gas welding equipment Quick-action coupling with shut-off valves for welding, cutting and allied processes EN 1563, Founding Spheroidal graphite cast irons EN 1774, Zinc and zinc alloys Alloys for foundry purposes Ingot and liquid EN , Pipe threads where pressure tight joints are made on the threads Part 1: Taper external threads and parallel internal threads Dimensions, tolerances and designation EN , Pipe threads where pressure tight joints are made on the threads Part 2: Taper external threads and taper internal threads Dimensions, tolerances and designation EN 12164, Copper and copper alloys Rod for free machining purposes EN 12165, Copper and copper alloys Wrought and unwrought forging stock EN 12420, Copper and copper alloys Forgings EN 12844, Zinc and zinc alloys Castings Specifications EN 15202, LPG equipment and accessories Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections EN , Fire hazard testing Part 11-10: Test flames 50 W horizontal and vertical flame test methods (IEC ) EN ISO 75 (all parts), Plastics Determination of temperature of deflection under load (ISO 75) EN ISO 178, Plastics Determination of flexural properties (ISO 178) EN ISO 180, Plastics Determination of Izod impact strength (ISO 180) EN ISO 228-1, Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation (ISO 228-1) EN ISO 527 (all parts), Plastics Determination of tensile properties (ISO 527) EN ISO :2003, Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting (ISO :2003) EN ISO , Plastics Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps (ISO ) EN ISO , Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors (ISO ) EN ISO 9227, Corrosion tests in artificial atmospheres Salt spray tests (ISO 9227) ISO 565, Test sieves Metal wire cloth, perforated metal plate and electroformed sheet Nominal sizes of openings ISO , Pipe flanges Part 1: Steel flanges for industrial and general service piping systems ISO , Metallic flanges Part 2: Cast iron flanges 9
Dansk standard DS/EN ISO udgave Campingtelte. Camping tents
Dansk standard DS/EN ISO 5912 2. udgave 2011-11-22 Campingtelte Camping tents DS/EN ISO 5912 København DS projekt: M245636 ICS: 97.200.30 Første del af denne publikations betegnelse er: DS/EN ISO, hvilket
Læs mereTekniske specifikationer for centrifugalpumper Klasse III
Dansk standard Tillæg DS/EN ISO 9908/A1 1. udgave 2011-06-08 Tekniske specifikationer for centrifugalpumper Klasse III Technical specifications for centrifugal pumps Class III Amendment 1 DS/EN ISO 9908/A1
Læs mereKosmetik Metoder til prøvning af solbeskyttelse In vivo-bestemmelse af UVA-beskyttelse
Dansk standard DS/EN ISO 24442 1. udgave 2012-02-01 Kosmetik Metoder til prøvning af solbeskyttelse In vivo-bestemmelse af UVA-beskyttelse Cosmetics Sun protection test methods In vivo determination of
Læs mereMaintenance Documentation for maintenance
Dansk standard DS/EN 13460 3. udgave 2009-12-15 Vedligehold Dokumentation for vedligehold Maintenance Documentation for maintenance DS/EN 13460 København DS projekt: M245239 ICS: 01.110; 21.020 Første
Læs merePapir og karton Bestemmelse af tykkelse, densitet og massevolumen
Dansk standard DS/EN ISO 534 1. udgave 2012-01-04 Papir og karton Bestemmelse af tykkelse, densitet og massevolumen Paper and board Determination of thickness, density and specific volume DS/EN ISO 534
Læs merePulvermaling Del 7: Bestemmelse af massetab efter ophedning i ovn
Dansk standard DS/EN ISO 8130-7 1. udgave 2011-01-21 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 8130-7:2011 Pulvermaling Del 7: Bestemmelse af massetab efter ophedning
Læs merePlast Bestemmelse af termoplasts massesmelteindeks (MFR) og volumensmelteindeks (MVR) Del 1: Standardmetode
Dansk standard DS/EN ISO 1133-1 1. udgave 2012-01-25 Plast Bestemmelse af termoplasts massesmelteindeks (MFR) og volumensmelteindeks (MVR) Del 1: Standardmetode Plastics Determination of the melt mass-flow
Læs mereMajs Bestemmelse af vandindhold (i forarbejdet korn og i hele korn)
Dansk standard DS/EN ISO 6540 1. udgave 2010-06-23 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 6540:2010 Majs Bestemmelse af vandindhold (i forarbejdet korn og i hele
Læs mereKrydderier og smagsstoffer Botanisk nomenklatur
Dansk standard DS/EN ISO 676 1. udgave 2009-07-23 Krydderier og smagsstoffer Botanisk nomenklatur Spices and condiments Botanical nomenclature DS/EN ISO 676 København DS projekt: M230052 ICS: 01.040.67;
Læs mereCentrale strømforsyningssystemer
Dansk Standard DS/EN 50171 1. udgave 2001-08-29 Centrale strømforsyningssystemer Central power supply systems DS/EN 50171 København DS projekt: 30769 ICS: 29.200 Deskriptorer: belysning til nødudgang,elektriske
Læs mereDansk standard DS/EN Loft ladders Requirements, marking and testing. 1. udgave
Dansk standard DS/EN 14975 1. udgave 2007-02-26 Loftstiger Krav, mærkning og prøvning Loft ladders Requirements, marking and testing DS/EN 14975 København DS projekt: 55746 ICS: 97.145 Første del af denne
Læs mereTeknisk tegning Flowdiagrammer til procesanlæg Generelle regler
Dansk Standard DS/EN ISO 10628 1. udgave Godkendelsesblad Godkendt:2001-04-06 Teknisk tegning Flowdiagrammer til procesanlæg Generelle regler Flow diagrams for process plants General rules DANSK STANDARD
Læs mereFritidsbåde Komfurer til flydende brændsel
Dansk standard DS/EN ISO 14895 1. udgave 2003-04-11 Fritidsbåde Komfurer til flydende brændsel Small craft Liquid-fuelled galley stoves DS/EN ISO 14895 København DS projekt: 47074 ICS: 47.080 Deskriptorer:
Læs merePalmeolie Bestemmelse af indeks for forringelse af blegningsevne (DOBI) samt bestemmelse af karotinindhold
Dansk standard DS/EN ISO 17932 2. udgave 2011-11-07 Palmeolie Bestemmelse af indeks for forringelse af blegningsevne (DOBI) samt bestemmelse af karotinindhold Palm oil Determination of the deterioration
Læs mereMalinger og lakker Belysning og procedure for visuel vurdering af belægninger
Dansk standard DS/EN ISO 13076 1. udgave 2012-08-10 Malinger og lakker Belysning og procedure for visuel vurdering af belægninger Paints and varnishes Lighting and procedure for visual assessments of coatings
Læs mereMaskinsikkerhed Elektrisk udstyr på maskiner Del 1: Generelle krav
Dansk standard Tillæg DS/EN 60204-1/A1 1. udgave 2009-03-13 Maskinsikkerhed Elektrisk udstyr på maskiner Del 1: Generelle krav Safety of machinery Electrical equipment of machines Part 1: General requirements
Læs mereCold rolled narrow steel strip Tolerances on dimensions and shape
Dansk standard DS/EN 10140 3. udgave 2009-06-02 Koldvalset båndstål Tolerancer for dimensioner og form Cold rolled narrow steel strip Tolerances on dimensions and shape DS/EN 10140 København DS projekt:
Læs mereGeometriske produktspecifikationer (GPS) Længdemåleudstyr højdemålere Design og metrologiske karakteristika
Dansk standard DS/EN ISO 13225 1. udgave 2012-05-23 Geometriske produktspecifikationer (GPS) Længdemåleudstyr højdemålere Design og metrologiske karakteristika Geometrical product specifications (GPS)
Læs merePackaging Flexible plastic/metal laminate tubes Dimensions and tolerances of nozzle S 13
Dansk standard DS/EN 14979 1. udgave 2006-03-31 Emballage Fleksible laminattuber af plast/metal Dimensioner og tolerancer for dyse S 13 Packaging Flexible plastic/metal laminate tubes Dimensions and tolerances
Læs mereMiljøledelsessystemer Kravbeskrivelse med råd om anvendelse
Dansk standard DS/EN ISO 14001 2. udgave 2004-11-30 Miljøledelsessystemer Kravbeskrivelse med råd om anvendelse Environmental management systems Requirements with guidance for use DS/EN ISO 14001 København
Læs mereLampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler
Dansk standard Tillæg DS/EN 60061-1/A41 (elektronisk) 1. udgave 2010-06-24 Lampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler Lamp caps and holders together
Læs mereSlanger og rør af gummi og plast Måling af fleksibilitet og stivhed Del 2: Bøjeprøvning ved lavere temperaturer end rumtemperatur
Dansk standard DS/EN ISO 10619-2 1. udgave 2012-01-24 Slanger og rør af gummi og plast Måling af fleksibilitet og stivhed Del 2: Bøjeprøvning ved lavere temperaturer end rumtemperatur Rubber and plastics
Læs mereElektrostatik Del 4-1: Standardprøvningsmetoder. anvendelser Gulvbelægningers og monterede gulves elektrostatiske egenskaber
Dansk standard Tillæg DS/EN 61340-4-1:2004/A1:2015 1. udgave 2015-06-23 Elektrostatik Del 4-1: Standardprøvningsmetoder for specifikke anvendelser Gulvbelægningers og monterede gulves elektrostatiske egenskaber
Læs mereDansk standard DS/EN Risk management Risk assessment techniques. 1. udgave
Dansk standard DS/EN 31010 1. udgave 2010-05-20 Risikoledelse Teknikker til risikovurdering Risk management Risk assessment techniques DS/EN 31010 København DS projekt: M231261 ICS: 03.100.01 Første del
Læs mereDansk standard DS/EN Weibull analysis. 1. udgave
Dansk standard DS/EN 61649 1. udgave 2008-12-10 Weilbull-analyse Weibull analysis DS/EN 61649 København DS projekt: M219606 ICS: 03.120.30 Første del af denne publikations betegnelse er: DS/EN, hvilket
Læs mereBatchstyring Del 1: Modeller og terminologi
Dansk Standard DS/EN 61512-1 1. udgave 2001-08-29 Batchstyring Del 1: Modeller og terminologi Batch control Part 1: Models and terminology DS/EN 61512-1 København DS projekt: 26009 ICS: 25.040.40 Deskriptorer:
Læs merePrøvningsmetoder til hjælpekomponenter til murværk Del 4: Bestemmelse af lastkapacitet og lastnedbøjning i bjælkesko
Dansk standard DS/EN 846-4 + A1 2. udgave 2002-12-04 Prøvningsmetoder til hjælpekomponenter til murværk Del 4: Bestemmelse af lastkapacitet og lastnedbøjning i bjælkesko Methods of test for ancillary components
Læs mereRotordynamiske pumper Godkendelsesprøvning af hydraulisk ydeevne Klasse 1, 2 og 3
Dansk standard DS/EN ISO 9906 2. udgave 2012-06-08 Rotordynamiske pumper Godkendelsesprøvning af hydraulisk ydeevne Klasse 1, 2 og 3 Rotodynamic pumps Hydraulic performance acceptance tests Grades 1, 2
Læs mereIkke-destruktiv prøvning Lækprøvning Kriterier for valg af metode og teknik
Dansk Standard DS/EN 1779 2. udgave 2001-10-26 Ikke-destruktiv prøvning Lækprøvning Kriterier for valg af metode og teknik Non-destructive testing Leak testing Criteria for method and technique selection
Læs mereBordtennis Del 2: Netstolper Krav og prøvningsmetoder
Dansk standard DS/EN 14468-2:2015 2. udgave 2015-04-29 Bordtennis Del 2: Netstolper Krav og prøvningsmetoder Table tennis Part 2: Posts for net assemblies Requirements and test methods DS/EN 14468-2:2015
Læs mereWc-kummer og wc-møbler Tilslutningsdimensioner
Dansk standard DS/EN 33 3. udgave 2011-10-03 Wc-kummer og wc-møbler Tilslutningsdimensioner WC pans and WC suites Connecting dimensions DS/EN 33 København DS projekt: M235262 ICS: 91.140.70 Første del
Læs mereTemperature Electromotive force (EMF) tables for pure-element thermocouple combinations
Dansk standard DS/EN 62460 1. udgave 2008-10-14 Temperatur Elektromotorisk kraft (EMF) Tabeller for kombinationer af rene termoelementer Temperature Electromotive force (EMF) tables for pure-element thermocouple
Læs mereSteel castings Austenitic manganese steel castings
Dansk standard DS/EN 10349 1. udgave 2009-11-05 Stålstøbegods Austenitisk manganstålstøbegods Steel castings Austenitic manganese steel castings DS/EN 10349 København DS projekt: M220956 ICS: 77.140.80
Læs mereVinduer og døre Vandtæthed Klassifikation
Dansk Standard DS/EN 12208 1. udgave Godkendt:2000-12-29 Vinduer og døre Vandtæthed Klassifikation Windows and doors Watertightness Classification DANSK STANDARD - Eftertryk uden tilladelse forbudt Kollegievej
Læs mereLampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler
Dansk standard Tillæg DS/EN 60061-1/A47 (elektronisk) 1. udgave 2012-04-23 Lampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler Lamp caps and holders together
Læs mereAkustik Støjreduktion Kabiner Laboratorie- og in situ-målinger
Dansk standard DS/EN ISO 11957 2. udgave 2009-09-22 Akustik Støjreduktion Kabiner Laboratorie- og in situ-målinger Acoustics Determination of sound insulation performance of cabins Laboratory and in situ
Læs mereDansk standard DS/EN 13429. Packaging Reuse. 3. udgave 2006-10-12
Dansk standard DS/EN 13429 3. udgave 2006-10-12 Emballage Genbrug Packaging Reuse DS/EN 13429 København DS projekt: M215981 ICS: 13.030.50; 55.020 Første del af denne publikations betegnelse er: DS/EN,
Læs mereSkovbrugs- og havebrugsmaskiner Vibrationsprøvning af bærbare håndholdte maskiner med forbrændingsmotor Vibrationer ved håndtagene
Dansk standard DS/EN ISO 22867 3. udgave 2012-01-25 Skovbrugs- og havebrugsmaskiner Vibrationsprøvning af bærbare håndholdte maskiner med forbrændingsmotor Vibrationer ved håndtagene Forestry and gardening
Læs mere2. udgave COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN A1:2009
Dansk standard DS/EN 13785 + A1 2. udgave 2009-01-27 Regulatorer med en kapacitet til og med 100 kg/h med et maksimalt nominelt afgangstryk til og med 4 bar, andre end regulatorer dækket af EN 12864 og
Læs mereAkustik Deklarering og verificering af støj fra maskiner og udstyr
Dansk standard DS/EN ISO 4871 2. udgave 2009-09-09 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 4871:2009 Akustik Deklarering og verificering af støj fra maskiner og udstyr
Læs mereGlasfiberarmeret plast Bestemmelse af hårdhed ved hjælp af Barcol-hårdhedsmåler
Dansk standard DS/EN 59:2016 2. udgave 2016-02-26 Glasfiberarmeret plast Bestemmelse af hårdhed ved hjælp af Barcol-hårdhedsmåler Glass reinforced plastics Determination of indentation hardness by means
Læs mereUdstyr til tilslutning af belysningsarmaturer til husholdningsbrug o.l. Del 2: Normblade for DCL
Dansk standard DS/EN 61995-2 1. udgave 2009-06-10 Udstyr til tilslutning af belysningsarmaturer til husholdningsbrug o.l. Del 2: Normblade for DCL Devices for the connection of luminaires for household
Læs mereMobil og bærbar DVB-T/H-radiotilslutning Del 2: Grænsefladeoverensstemmelsesprøvning
Dansk standard DS/EN 62002-2 1. udgave 2006-12-12 Mobil og bærbar DVB-T/H-radiotilslutning Del 2: Grænsefladeoverensstemmelsesprøvning Mobile and portable DVB-T/H radio access Part 2: Interface conformance
Læs mereControl technology Rules for the designation of measuring instruments
Dansk standard DS/EN 62419 1. udgave 2009-03-10 Styringsteknologi Regler for benævnelse af måleinstrumenter Control technology Rules for the designation of measuring instruments DS/EN 62419 København DS
Læs mereTilsatsmaterialer til svejsning Pulverfyldte elektroder til metallysbuesvejsning
Dansk standard DS/EN ISO 12153 1. udgave 2012-06-08 Tilsatsmaterialer til svejsning Pulverfyldte elektroder til metallysbuesvejsning med eller uden beskyttelsesgas af nikkel og nikkellegeringer Klassifikation
Læs mereLegepladsredskaber og -underlag Del 11: Tredimensionelle klatrenet Supplerende specifikke sikkerhedskrav og prøvningsmetoder
Dansk standard DS/EN 1176-11 2. udgave 2009-04-22 Legepladsredskaber og -underlag Del 11: Tredimensionelle klatrenet Supplerende specifikke sikkerhedskrav og prøvningsmetoder Playground equipment and surfacing
Læs mereGrænseflade for digital lyd Del 1: Generelt
Dansk standard DS/EN 60958-1 3. udgave 2008-10-31 Grænseflade for digital lyd Del 1: Generelt Digital audio interface Part 1: General DS/EN 60958-1 København DS projekt: M222433 ICS: 33.160.30 Første del
Læs mereLiming materials Determination of the breakdown of granulated calcium and calcium/magnesium carbonates under the influence of water
Dansk standard DS/EN 15704 1. udgave 2009-01-23 Jordbrugskalk Bestemmelse af nedbrydning af granuleret calcium- og calcium/magnesiumcarbonater påvirket af vand Liming materials Determination of the breakdown
Læs mereKøkkengrej Grafiske symboler (piktogrammer)
Dansk standard DS/EN 14916 1. udgave 2005-11-14 Køkkengrej Grafiske symboler (piktogrammer) Domestic cookware Graphical symbols (pictograms) DS/EN 14916 København DS projekt: 55114 ICS: 01.080.20; 97.040.60
Læs mereKapslingsklasser (IP-kode)
Dansk Standard DS/EN 60529+A1 1. udgave 2002-04-05 Kapslingsklasser (IP-kode) Degrees of protection provided by enclosures (IP Code) DS/EN 60529+A1 København DS projekt: 47050 ICS: 29.020 Deskriptorer:
Læs mereGasfyrede tørretumblere af type B med en nominel belastning, der ikke overstiger 20 kw Del 2: Rationel energiudnyttelse
Dansk Standard DS/EN 12752-2 2. udgave 2001-11-09 Gasfyrede tørretumblere af type B med en nominel belastning, der ikke overstiger 20 kw Del 2: Rationel energiudnyttelse Gas-fired tumble dryers of type
Læs mereTrækonstruktioner Bestemmelse af dyblers brudmoment
Dansk standard DS/EN 409 2. udgave 2009-06-24 Trækonstruktioner Bestemmelse af dyblers brudmoment Timber structures Test methods Determination of the yield moment of dowel type fasteners DS/EN 409 København
Læs mereMultimedia quality Method of assessment of synchronization of audio and video
Dansk standard DS/EN 62503 1. udgave 2008-10-31 Multimediekvalitet Metode til fastsættelse af synkronisering mellem lyd og billede Multimedia quality Method of assessment of synchronization of audio and
Læs mereSpecifikation og kvalificering af svejseprocedurer for metalliske materialer Kvalificering ved godkendelse af en standardsvejseprocedure
Dansk standard DS/EN ISO 15612 2. udgave 2005-12-22 Specifikation og kvalificering af svejseprocedurer for metalliske materialer Kvalificering ved godkendelse af en standardsvejseprocedure Specification
Læs mereSolcelleanlæg Termer, definitioner og symboler
DS-information DS/CLC/TS 61836 1. udgave 2009-06-26 Solcelleanlæg Termer, definitioner og symboler Solar photovoltaic energy systems Terms, definitions and symbols DS/CLC/TS 61836 København DS projekt:
Læs mereDansk Standard DS/EN udgave. Flymateriel
Dansk Standard DS/EN 3961 1. udgave Godkendt:2001-07-11 Flymateriel Aerospace series Gold base alloy AU-B40001 Filler metal for brazing-rolled foil DANSK STANDARD - Eftertryk uden tilladelse forbudt Kollegievej
Læs mereHalvlederelementer Mekaniske og klimatiske prøvningsmetoder Del 33: Accelereret fugtbestandighed Objektiv autoklav
Dansk standard DS/EN 60749-33 1. udgave 2004-04-29 Halvlederelementer Mekaniske og klimatiske prøvningsmetoder Del 33: Accelereret fugtbestandighed Objektiv autoklav Semiconductor devices Mechanical and
Læs mereStyring af rumfartsprojekter. Generelle krav. Del 1: Politik og principper
Dansk Standard DS/EN 13290-1 1. udgave Godkendt:2000-04-13 Styring af rumfartsprojekter. Generelle krav. Del 1: Politik og principper Space project management - General requirements - Part 1: Policy and
Læs mereEurocode 1: Last på bærende konstruktioner Del 1-3: Generelle laster Snelast
Dansk standard DS/EN 1991-1-3 2. udgave 2007-06-22 Eurocode 1: Last på bærende konstruktioner Del 1-3: Generelle laster Snelast Eurocode 1 Actions on structures Part 1-3: General actions - Snow loads DS/EN
Læs mereLedelse af pålidelighedsaktiviteter Del 3-11: Anvendelsesvejledning Pålidelighedscentreret vedligehold (RCM)
Dansk standard DS/EN 60300-3-11 1. udgave 2009-12-10 Ledelse af pålidelighedsaktiviteter Del 3-11: Anvendelsesvejledning Pålidelighedscentreret vedligehold (RCM) Dependability management Part 3-11: Application
Læs mereAustenitiske, austenitisk-ferritiske og ferritiske langssvejste rustfrie stålrør til fødevareindustri og kemisk industri
Dansk standard DS/EN 10357 1. udgave 2014-01-09 Austenitiske, austenitisk-ferritiske og ferritiske langssvejste rustfrie stålrør til fødevareindustri og kemisk industri Austenitic, austenitic-ferritic
Læs mereTandpleje Manuelle tandbørster Generelle krav og prøvningsmetoder
Dansk standard DS/EN ISO 20126 2. udgave 2012-04-18 Tandpleje Manuelle tandbørster Generelle krav og prøvningsmetoder Dentistry Manual toothbrushes General requirements and test methods DS/EN ISO 20126
Læs mereKontormøbler Kontorstole Del 1: Mål Bestemmelse af dimensioner
Dansk Standard DS/EN 1335-1 2. udgave Godkendt: 2001-02-21 Kontormøbler Kontorstole Del 1: Mål Bestemmelse af dimensioner Office furniture Office work chair Part 1: Dimensions Determination of dimensions
Læs mereForkoblingsenheder for lysstofrør Krav til ydeevne
Dansk standard DS/EN 60921 2. udgave 2005-02-10 Forkoblingsenheder for lysstofrør Krav til ydeevne Ballasts for tubular fluorescent lamps Performance requirements DS/EN 60921 København DS projekt: 49567
Læs mereGlaserede lerrør, fittings og rørsamlinger til afløbsledninger Del 10: Ydeevnekrav
Dansk standard DS/EN 295-10 1. udgave 2005-08-12 Glaserede lerrør, fittings og rørsamlinger til afløbsledninger Del 10: Ydeevnekrav Vitrified clay pipes and fittings and pipe joints for drains and sewers
Læs mereGødning Ekstraktion af vandopløseligt calcium, magnesium, natrium og svovl i form af sulfat
Dansk standard DS/EN 15961 1. udgave 2012-01-06 Gødning Ekstraktion af vandopløseligt calcium, magnesium, natrium og svovl i form af sulfat Fertilizers Extraction of water-soluble calcium, magnesium, sodium
Læs mereFacility Management Del 2: Vejledning i udarbejdelse af Facility Management-aftaler
Dansk standard DS/EN 15221-2 2. udgave 2008-06-30 Facility Management Del 2: Vejledning i udarbejdelse af Facility Management-aftaler Facility Management Part 2: Guidance on how to prepare Facility Management
Læs mereGrænseflade for digital lysstyring (DALI) Del 208: Særlige krav til kontroludstyr Omskifterfunktion (udstyrstype 7)
Dansk standard DS/EN 62386-208 1. udgave 2009-09-22 Grænseflade for digital lysstyring (DALI) Del 208: Særlige krav til kontroludstyr Omskifterfunktion (udstyrstype 7) Digital addressable lighting Interface
Læs mereMatematiske udtryk for pålidelighed, tilgængelighed og vedligehold samt for understøttelse af vedligehold
Dansk Standard DS/EN 61703 1. udgave 2002-05-01 Matematiske udtryk for pålidelighed, tilgængelighed og vedligehold samt for understøttelse af vedligehold Mathematical expressions for reliability,availability,
Læs mereFertilizers Determination of the water-soluble potassium content
Dansk standard DS/EN 15477 1. udgave 2009-02-16 Gødning Bestemmelse af vandopløseligt kalium Fertilizers Determination of the water-soluble potassium content DS/EN 15477 København DS projekt: M229380 ICS:
Læs mereFaste modstande til brug i elektronisk udstyr Del 1: Generisk specifikation
Dansk standard Tillæg DS/EN 60115-1:2011/ A11:2015 1. udgave 2015-05-18 Faste modstande til brug i elektronisk udstyr Del 1: Generisk specifikation Fixed resistors for use in electronic equipment Part
Læs mereLedere af isolerende kabler
Dansk standard Rettelsesblad DS/EN 60228/AC:2005 1. udgave Ledere af isolerende kabler Conductors of insulated cables DS/EN 60228/AC:2005 København DS projekt: M290250 ICS: 29.060.01 Første del af denne
Læs mereGrænseflade for digital lyd Del 1: Generelt
Dansk standard Tillæg DS/EN 60958-1/A1 1. udgave 2014-09-02 Grænseflade for digital lyd Del 1: Generelt Digital audio interface Part 1: General DS/EN 60958-1/A1 København DS projekt: M277911 ICS: 33.160.30
Læs mereStearinlys Produktsikkerhedsmærkning
Dansk standard DS/EN 15494 1. udgave 2007-11-12 Stearinlys Produktsikkerhedsmærkning Candles Product safety labels DS/EN 15494 København DS projekt: M212730 ICS: 13.120; 97.180 Første del af denne publikations
Læs mereTransportbånd Bestemmelse af trækstyrken for mekaniske forbindelser Statisk prøvningsmetode
Dansk Standard DS/EN ISO 1120 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION Transportbånd Bestemmelse af trækstyrken for mekaniske forbindelser Statisk prøvningsmetode Conveyor belts
Læs mereAluminium og aluminiumlegeringer Rondeller og rondelmaterialer til produktion af køkkenredskaber Specifikationer
Dansk standard DS/EN 851 2. udgave 2014-07-14 Aluminium og aluminiumlegeringer Rondeller og rondelmaterialer til produktion af køkkenredskaber Specifikationer Aluminium and aluminium alloys Circle and
Læs mereJernbaneanvendelser Datakommunikation, signallering og databehandling Del 1: Sikkerhedsrelateret kommunikation i lukkede transmissionssystemer
Dansk Standard DS/EN 50159-1 1. udgave 2001-10-31 Jernbaneanvendelser Datakommunikation, signallering og databehandling Del 1: Sikkerhedsrelateret kommunikation i lukkede transmissionssystemer Railway
Læs mereElmålingsudstyr (vekselstrøm) Særlige krav Del 23: Statiske målere til reaktiv energi (klasse 2 og 3)
Dansk standard DS/EN 62053-23 1. udgave 2003-04-11 Elmålingsudstyr (vekselstrøm) Særlige krav Del 23: Statiske målere til reaktiv energi (klasse 2 og 3) Electricity metering equipment (a.c.) Particular
Læs mereIntegration af virksomhedens styringssystem Del 1: Modeller og terminologi
Dansk standard DS/EN 62264-1 1. udgave 2008-02-01 Integration af virksomhedens styringssystem Del 1: Modeller og terminologi Enterprise-control system integration DS/EN 62264-1 København DS projekt: M222179
Læs merePackaging Requirements for the use of European Standards in the field of packaging and packaging waste
Dansk standard DS/EN 13427 3. udgave 2006-10-12 Emballage Krav til anvendelsen af europæiske standarder for emballage og emballageaffald Packaging Requirements for the use of European Standards in the
Læs mereEurocode 7: Geoteknik Del 1: Generelle regler
Dansk standard Tillæg DS/EN 1997-1/A1 1. udgave 2014-02-03 Eurocode 7: Geoteknik Del 1: Generelle regler Eurocode 7: Geotechnical design Part 1: General rules DS/EN 1997-1/A1 København DS projekt: M267839
Læs mereVarmvalsede stålplader med en tykkelse på 3 mm eller mere Dimensions- og formtolerancer
Dansk standard DS/EN 10029 2. udgave 2010-12-14 Varmvalsede stålplader med en tykkelse på 3 mm eller mere Dimensions- og formtolerancer Hot-rolled steel plates 3 mm thick or above Tolerances on dimensions
Læs mereKosmetik Mikrobiologi Vurdering af et kosmetikprodukts antimikrobielle beskyttelse
Dansk standard DS/EN ISO 11930 1. udgave 2012-04-25 Kosmetik Mikrobiologi Vurdering af et kosmetikprodukts antimikrobielle beskyttelse Cosmetics Microbiology Evaluation of the antimicrobial protection
Læs mereKlassifikation og betegnelse af dokumenter for fabriksanlæg, anlæg og udstyr Del 1: Regler og klassifikationstabeller
Dansk standard DS/EN 61355-1 2. udgave 2008-07-04 Klassifikation og betegnelse af dokumenter for fabriksanlæg, anlæg og udstyr Del 1: Regler og klassifikationstabeller Classification and designation of
Læs mereAerosoldåser af metal Dåser af fortinnet metal Dimensioner for to- og tre-delte dåser
Dansk standard DS/EN 15007 1. udgave 2007-01-23 Aerosoldåser af metal Dåser af fortinnet metal Dimensioner for to- og tre-delte dåser Metal aerosol containers Tinplate containers Dimensions of two and
Læs mereFugtindhold af et stykke savet træ Del 2: Vurdering ved elektrisk modstandsmetode
Dansk Standard DS/EN 13183-2 1. udgave 2002-04-30 Fugtindhold af et stykke savet træ Del 2: Vurdering ved elektrisk modstandsmetode Moisture content of a piece of sawn timber Part 2: Estimation by electrical
Læs mereSvejsekoordination Opgaver og ansvarsforhold
Dansk standard DS/EN ISO 14731 1. udgave 2006-11-06 Svejsekoordination Opgaver og ansvarsforhold Welding coordination Tasks and responsibilities DS/EN ISO 14731:2006 København DS projekt: 55660 ICS: 25.160.01
Læs mereAudioudstyr og audiovisuelt udstyr Digitale audiodele Grundlæggende metoder til måling af audiokarakteristika Del 3: Professionel brug
Dansk standard DS/EN 61606-3 1. udgave 2008-12-12 Audioudstyr og audiovisuelt udstyr Digitale audiodele Grundlæggende metoder til måling af audiokarakteristika Del 3: Professionel brug Audio and audiovisual
Læs mereElproducerende vindmøller Del 25-3: Kommunikationssystemer til overvågning og styring af vindmølleparker Modeller for informationsudveksling
Dansk standard DS/EN 61400-25-3 1. udgave 2007-04-27 Elproducerende vindmøller Del 25-3: Kommunikationssystemer til overvågning og styring af vindmølleparker Modeller for informationsudveksling Wind turbines
Læs mereLavspændingssikringer Del 1: Generelle krav
Dansk standard DS/EN 60269-1 3. udgave 2007-06-19 Lavspændingssikringer Del 1: Generelle krav Low-voltage fuses Part 1: General requirements DS/EN 60269-1 København DS projekt: M205966 ICS: 29.120.50 Første
Læs mereidentifikation Betjeningsprincipper
Dansk standard DS/EN 60447 1. udgave 2005-03-01 Grundlæggende principper og sikkerhedsprincipper for mandmaskine-grænseflade, mærkning og identifikation Betjeningsprincipper Basic and safety principles
Læs mereKryogene beholdere Ventiler til anvendelse i kryogene anlæg
Dansk standard DS/EN 1626 2. udgave 2008-11-26 Kryogene beholdere Ventiler til anvendelse i kryogene anlæg Cryogenic vessels Valves for cryogenic service DS/EN 1626 København DS projekt: M219158 ICS: 23.020.40
Læs mereDansk standard DS/EN
Dansk standard DS/EN 60534-2-5 1. udgave 2003-12-22 Reguleringsventiler til industrielle processer Del 2-5: Gennemstrømningskapacitet Dimensionsligninger for væskestrømme gennem flertrinsreguleringsventiler
Læs mereHjælpemidler til personer med funktionsevnenedsættelse Klassifikation og terminologi
Dansk standard DS/EN ISO 9999 6. udgave 2007-12-19 Hjælpemidler til personer med funktionsevnenedsættelse Klassifikation og terminologi Assistive products for persons with disability Classification and
Læs mereMaskinsikkerhed Permanente adgangsveje til maskinanlæg Del 4: Faste stiger
Dansk standard Tillæg DS/EN ISO 14122-4/A1 1. udgave 2010-10-19 Maskinsikkerhed Permanente adgangsveje til maskinanlæg Del 4: Faste stiger Safety of machinery Permanent means of access to machinery Part
Læs mereEurocode 6: Murværkskonstruktioner Del 1-2: Generelle regler Brandteknisk dimensionering
Dansk standard DS/EN 1996-1-2 2. udgave 2007-03-16 Eurocode 6: Murværkskonstruktioner Del 1-2: Generelle regler Brandteknisk dimensionering Eurocode 6 Design of masonry structures Part 1-2: General rules
Læs mereCylindrical helical springs made of round wire Quality specifications for cold coiled compression springs
Dansk standard DS/EN 15800 1. udgave 2009-03-12 Cylindriske spiralfjedre fremstillet af rund tråd Kvalitetsspecifikationer for koldformede trykfjedre Cylindrical helical springs made of round wire Quality
Læs mereMøbler Barnesenge og foldbare barnesenge til privat brug Del 1: Sikkerhedskrav
Dansk standard DS/EN 716-1 3. udgave 2008-10-09 Møbler Barnesenge og foldbare barnesenge til privat brug Del 1: Sikkerhedskrav Furniture Children's cots and folding cots for domestic use Part 1: Safety
Læs mere