Engine powered forklift tonne
|
|
- Tove Henriksen
- 4 år siden
- Visninger:
Transkript
1 Engine powered forklift tonne
2 Engine powered forklift tonne Truck specifications 02-8FGF FDF FGF FDF Manufacturer TOYOTA TOYOTA TOYOTA TOYOTA 1.2 Model 02-8FGF FDF FGF FDF Drive LPG Diesel LPG Diesel 1.4 Operator type Rider seated Rider seated Rider seated Rider seated 1.5 Load capacity/rated load Q kg Load centre c mm Load distance, centre of drive axle to fork x mm Wheelbase y mm Service weight kg Axle load, with load, front/rear kg 3460/ / / / Axle load, without load, front/rear kg 1040/ / / /1610 Identification Weight Tyres Dimensions Performance data Combustion engine Others 3.1 Tyre - pneumatic (P), pneumatic shaped cushion (SE), solid rubber (R) SE SE SE SE 3.2 Tyre size, front 6, , , , Tyre size, rear 5,00-8 5,00-8 5,00-8 5, Wheels, number front/rear (x = driven wheels) 2x/2 2x/2 2x/2 2x/2 3.6 Track width, front b 10 mm Track width, rear b 11 mm Tilt of mast/fork carriage forward/backward a/b deg 6/11 6/11 6/11 6/ Height, mast lowered h 1 mm Free lift h 2 mm Lift h 3 mm mm Height, mast extended h 4 mm Height of overhead guard (cab) h 6 mm Seat height h 7 mm Coupling height h 10 mm Overall length l 1 mm Length to face of forks l 2 mm Overall width b 1 mm Fork dimensions s/e/l mm 40/80/ /80/ /80/ /80/ Fork carriage DIN , class/type A, B IIA IIA IIA IIA 4.24 Fork-carriage width b 3 mm Ground clearance, with load, below mast m 1 mm Ground clearance, centre of wheelbase m 2 mm Aisle width for pallets 1000x1200 crossways A st mm Aisle width for pallets 800x1200 lengthways A st mm Turning radius W a mm Internal turning radius b 13 mm Travel speed, with/without load km/h 18,5/19,0 18,0/18,5 18,5/19,0 18,0/18,5 5.2 Lift speed, with/without load m/s 0,67/0,68 0,65/0,68 0,67/0,68 0,65/0, Lowering speed, with/without load m/s 0,50/0,55 0,50/0,55 0,50/0,55 0,50/0, Max. drawbar pull, with/without load N 17500/ / / / Gradeability, with load 1) 2) % Max. gradeability, with/without load 2) % 45/22 45/22 44/20 41/ Service brake Hydraulic Hydraulic Hydraulic Hydraulic 7.1 Engine manufacturer/type 4Y-ECS 1DZ-III (IIIA) 4Y-ECS 1DZ-III (IIIA) 7.2 Engine power according to ISO 1585 kw Rated speed 1/min No. of cylinders/displacement cm 3 4/2237 4/2486 4/2237 4/ a Fuel consumption according to VDI 60 l/h 2,6 2,8 7.5b Fuel consumption according to VDI 60 kg/h 2,3 2,3 8.2 Operating pressure for attachments bar Oil volume for attachments l/min 65 max. 64 max. 65 max. 64 max. 8.4 Sound level at the driver s ear according to EN db(a) ) At 1,5 km/h 2) Computed values Performance data and dimensions are nominal and subject to tolerances. Specifications are subject to change without notice. Please obtain the latest specifications before contracting products.
3 Mast dimensions and rated capacities Model V FV FSV 8FG/DF15/ Lift h Height, mast lowered h Height, mast extended 1) h Height, mast extended 2) h Free lift, without load backrest h [1250] 1590 [1400] 1690 [1500] 1850 [1660] 2040 [1850] Free lift, with load backrest h ) Without load backrest 2) With load backrest; Height of standard load backrest is 1220 mm. Data in [ ] are for when A4 piping is selected. Single tyre V FV FSV 8FG/DF15 8FG/DF18 Tilt range, forward deg Tilt range, backward deg 11(6) 11(6) 11(6) 11(6) 11(6) (6) 11(6) 11(6) 11(6) 11(6) Load capacity, P tyres at 500 mm LC kg Load capacity, SE tyres at 500 mm LC kg Tilt range, forward deg Tilt range, backward deg 11(6) 11(6) 11(6) 11(6) 11(6) (6) 11(6) 11(6) 11(6) 11(6) Load capacity, P tyres at 500 mm LC kg Load capacity, SE tyres at 500 mm LC kg Dual tyre V FV FSV 8FG/ DF15 8FG/ DF18 Tilt range, forward deg Tilt range, backward deg 10(5) 10(5) 10(5) 10(5) 10(5) 10(5) (5) 10(5) 10(5) 10(5) 10(5) Load capacity, P/SE tyres 500 mm LC kg Tilt range, forward deg Tilt range, backward deg 10(5) 10(5) 10(5) 10(5) 10(5) 10(5) (5) 10(5) 10(5) 10(5) 10(5) Load capacity, P/SE tyres at 500 mm LC kg Data in ( ) are for when Cabin Series is selected (minimum front windshield). h 10 h 2 h7 b 1 b 10 b 11 s h 1 m 1 h 3 h 23 h 6 h 4 x m2 y l 2 e Wa l l 1
4 Engine powered forklift 2.0 tonne Truck specifications 02-8FGKF FDKF FGF FDF FDF Manufacturer TOYOTA TOYOTA TOYOTA TOYOTA TOYOTA 1.2 Model 02-8FGKF FDKF FGF FDF FDF Drive LPG Diesel LPG Diesel Diesel 1.4 Operator type Rider seated Rider seated Rider seated Rider seated Rider seated 1.5 Load capacity/rated load Q kg Load centre c mm Load distance, centre of drive axle to fork x mm Wheelbase y mm Service weight kg Axle load, with load, front/rear kg 4450/ / / / / Axle load, without load, front/rear kg 1150/ / / / /1870 Identification Weight Tyres Dimensions Performance data Combustion engine Others 3.1 Tyre - pneumatic (P), pneumatic shaped cushion (SE), solid rubber (R) SE SE SE SE SE 3.2 Tyre size, front 21x8-9 21x Tyre size, rear 18x7-8 18x Wheels, number front/rear (x = driven wheels) 2x/2 2x/2 2x/2 2x/2 2x/2 3.6 Track width, front b 10 mm Track width, rear b 11 mm Tilt of mast/fork carriage forward/backward a/b deg 7/10 7/10 6/11 6/11 6/ Height, mast lowered h 1 mm Free lift h 2 mm Lift h 3 mm mm Height, mast extended h 4 mm Height of overhead guard (cab) h 6 mm Seat height h 7 mm Coupling height h 10 mm Overall length l 1 mm Length to face of forks l 2 mm Overall width b 1 mm Fork dimensions s/e/l mm 40/100/ /100/ /100/ /100/ /100/ Fork carriage DIN , class/type A, B IIA IIA IIA IIA IIA 4.24 Fork-carriage width b 3 mm Ground clearance, with load, below mast m 1 mm Ground clearance, centre of wheelbase m 2 mm Aisle width for pallets 1000x1200 crossways A st mm Aisle width for pallets 800x1200 lengthways A st mm Turning radius W a mm Internal turning radius b 13 mm Travel speed, with/without load km/h 17,0/17,5 17,0/17,5 17,5/18,0 17,0/17,5 19,0/19,5 5.2 Lift speed, with/without load m/s 0,60/0,64 0,56/0,60 0,60/0,64 0,56/0,60 0,62/0, Lowering speed, with/without load m/s 0,50/0,50 0,50/0,50 0,50/0,50 0,50/0,50 0,50/0, Max. drawbar pull, with/without load N 18800/ / / / / Gradeability, with load 1) 2) % Max. gradeability, with/without load 2) % 40/20 38/20 39/22 36/22 36/ Service brake Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic 7.1 Engine manufacturer/type 4Y-ECS 1DZ-III (IIIA) 4Y-ECS 1DZ-III (IIIA) 1ZS (IIIB) 7.2 Engine power according to ISO 1585 kw Rated speed 1/min No. of cylinders/displacement cm 3 4/2237 4/2486 4/2237 4/2486 3/ a Fuel consumption according to VDI 60 l/h 3,0 3,0 2,6 7.5b Fuel consumption according to VDI 60 kg/h 2,4 2,5 8.2 Operating pressure for attachments bar Oil volume for attachments l/min Sound level at the driver s ear according to EN db(a) ) At 1,5 km/h 2) Computed values Performance data and dimensions are nominal and subject to tolerances. Specifications are subject to change without notice. Please obtain the latest specifications before contracting products.
5 Mast dimensions and rated capacities Model V FV FSV 8FG/DKF20 8FG/DF Lift h Height, mast lowered h Height, mast extended 1) h Height, mast extended 2) h Free lift, without load backrest h [1220] 1520 [1370] 1620 [1470] 1780 [1630] 1970 [1820] Free lift, with load backrest h Lift h Height, mast lowered h Height, mast extended 1) h Height, mast extended 2) h Free lift, without load backrest h [1220] 1550 [1370] 1650 [1470] 1810 [1630] 2000 [1820] Free lift, with load backrest h ) Without load backrest 2) With load backrest; Height of standard load backrest is 1220 mm. Data in [ ] are for when A4 piping is selected. Single tyre V FV FSV 8FG/DKF20 8FG/DF20 Tilt range, forward deg Tilt range, backward deg 10(5) 10(5) 10(5) 10(5) 10(5) (5) 10(5) 10(5) 10(5) 10(5) Load capacity, P tyres at 500 mm LC kg Load capacity, SE tyres at 500 mm LC kg Tilt range, forward deg Tilt range, backward deg 11(6) 11(6) 11(6) 11(6) 11(6) (6) 11(6) 11(6) 11(6) 11(6) Load capacity, P tyres at 500 mm LC kg Load capacity, SE tyres at 500 mm LC kg Dual tyre V FV FSV 8FG/ DF20 Tilt range, forward deg Tilt range, backward deg 11(6) 11(6) 11(6) 11(6) 11(6) 11(6) (6) 11(6) 11(6) 11(6) 11(6) Load capacity, P/SE tyres at 500 mm LC kg Data in ( ) are for when Cabin Series is selected (minimum front windshield). s m 1 h 10 h 2 h7 b 1 b 10 b 11 h 1 h 3 h 23 h 6 h 4 l x m2 y l 2 e Wa l 1
6 Engine powered forklift 2.5 tonne Truck specifications 02-8FGF FDF FDF Manufacturer TOYOTA TOYOTA TOYOTA 1.2 Model 02-8FGF FDF FDF Drive LPG Diesel Diesel 1.4 Operator type Rider seated Rider seated Rider seated 1.5 Load capacity/rated load Q kg Load centre c mm Load distance, centre of drive axle to fork x mm Wheelbase y mm Service weight kg Identification Weight Tyres Dimensions Performance data Combustion engine Others 2.2 Axle load, with load, front/rear kg 5280/ / / Axle load, without load, front/rear kg 1300/ / / Tyre - pneumatic (P), pneumatic shaped cushion (SE), solid rubber (R) SE SE SE 3.2 Tyre size, front 7, , , Tyre size, rear 6,00-9 6,00-9 6, Wheels, number front/rear (x = driven wheels) 2x/2 2x/2 2x/2 3.6 Track width, front b 10 mm Track width, rear b 11 mm Tilt of mast/fork carriage forward/backward a/b deg 6/11 6/11 6/ Height, mast lowered h 1 mm Free lift h 2 mm Lift h 3 mm mm Height, mast extended h 4 mm Height of overhead guard (cab) h 6 mm Seat height h 7 mm Coupling height h 10 mm Overall length l 1 mm Length to face of forks l 2 mm Overall width b 1 mm Fork dimensions s/e/l mm 40/100/ /100/ /100/ Fork carriage DIN , class/type A, B IIA IIA IIA 4.24 Fork-carriage width b 3 mm Ground clearance, with load, below mast m 1 mm Ground clearance, centre of wheelbase m 2 mm Aisle width for pallets 1000x1200 crossways A st mm Aisle width for pallets 800x1200 lengthways A st mm Turning radius W a mm Internal turning radius b 13 mm Travel speed, with/without load km/h 17,5/18 17,0/17,5 19/19,5 5.2 Lift speed, with/without load m/s 0,60/0,64 0,56/0,60 0,62/0, Lowering speed, with/without load m/s 0,50/0,50 0,50/0,50 0,50/0, Max. drawbar pull, with/without load N 18500/ / / Gradeability, with load 1) 2) % Max. gradeability, with/without load 2) % 33/19 31/19 31/ Service brake Hydraulic Hydraulic Hydraulic 7.1 Engine manufacturer/type 4Y-ECS 1DZ-III (IIIA) 1ZS (IIIB) 7.2 Engine power according to ISO 1585 kw Rated speed 1/min No. of cylinders/displacement cm 3 4/2237 4/2486 3/ a Fuel consumption according to VDI 60 l/h 3,4 2,9 7.5b Fuel consumption according to VDI 60 kg/h 2,7 8.2 Operating pressure for attachments bar Oil volume for attachments l/min Sound level at the driver s ear according to EN db(a) ) At 1,5 km/h 2) Computed values Performance data and dimensions are nominal and subject to tolerances. Specifications are subject to change without notice. Please obtain the latest specifications before contracting products.
7 Mast dimensions and rated capacities Model V FV FSV 8FG/DF Lift h Height, mast lowered h Height, mast extended 1) h Height, mast extended 2) h Free lift, without load backrest h [1220] 1550 [1370] 1650 [1470] 1810 [1630] 2000 [1820] Free lift, with load backrest h ) Without load backrest 2) With load backrest; Height of standard load backrest is 1220 mm. Data in [ ] are for when A4 piping is selected. Single tyre V FV FSV 8FG/DF25 Tilt range, forward deg Tilt range, backward deg 11(6) 11(6) 11(6) 11(6) (6) 11(6) 11(6) 11(6) Load capacity, P tyres at 500 mm LC kg Load capacity, SE tyres at 500 mm LC kg Dual tyre V FV FSV 8FG/ DF25 Tilt range, forward deg Tilt range, backward deg 11(6) 11(6) 11(6) 11(6) 11(6) 11(6) (6) 11(6) 11(6) 11(6) 11(6) Load capacity, P/SE tyres at 500 mm LC kg Data in ( ) are for when Cabin Series is selected (minimum front windshield). h 10 h 2 h7 b 1 b 10 s m 1 b 11 h 1 h 3 h 23 h 6 h 4 l x m2 y l 2 e Wa l 1
8 Engine powered forklift 3.0 tonne Truck specifications 02-8FGF FDF FDF Manufacturer TOYOTA TOYOTA TOYOTA 1.2 Model 02-8FGF FDF FDF Drive LPG Diesel Diesel 1.4 Operator type Rider seated Rider seated Rider seated 1.5 Load capacity/rated load Q kg Load centre c mm Load distance, centre of drive axle to fork x mm Wheelbase y mm Service weight kg Identification Weight Tyres Dimensions Performance data Combustion engine Others 2.2 Axle load, with load, front/rear kg 6230/ / / Axle load, without load, front/rear kg 1490/ / / Tyre - pneumatic (P), pneumatic shaped cushion (SE), solid rubber (R) SE SE SE 3.2 Tyre size, front 28x x x Tyre size, rear 6, , , Wheels, number front/rear (x = driven wheels) 2x/2 2x/2 2x/2 3.6 Track width, front b 10 mm Track width, rear b 11 mm Tilt of mast/fork carriage forward/backward a/b deg 6/11 6/11 6/ Height, mast lowered h 1 mm Free lift h 2 mm Lift h 3 mm mm Height, mast extended h 4 mm Height of overhead guard (cab) h 6 mm Seat height h 7 mm Coupling height h 10 mm Overall length l 1 mm Length to face of forks l 2 mm Overall width b 1 mm Fork dimensions s/e/l mm 45/100/ /100/ /100/ Fork carriage DIN , class/type A, B IIIA IIIA IIIA 4.24 Fork-carriage width b 3 mm Ground clearance, with load, below mast m 1 mm Ground clearance, centre of wheelbase m 2 mm Aisle width for pallets 1000x1200 crossways A st mm Aisle width for pallets 800x1200 lengthways A st mm Turning radius W a mm Internal turning radius b 13 mm Travel speed, with/without load km/h 18,5/19,0 16,0/16,5 18,5/19,0 5.2 Lift speed, with/without load m/s 0,51/0,55 0,44/0,47 0,50/0, Lowering speed, with/without load m/s 0,50/0,50 0,50/0,50 0,50/0, Max. drawbar pull, with/without load N 18000/ / / Gradeability, with load 1) 2) % Max. gradeability, with/without load 2) % 26/20 27/20 28/ Service brake Hydraulic Hydraulic Hydraulic 7.1 Engine manufacturer/type 4Y-ECS 1DZ-III (IIIA) 1ZS (IIIB) 7.2 Engine power according to ISO 1585 kw Rated speed 1/min No. of cylinders/displacement cm 3 4/2237 4/2486 3/ a Fuel consumption according to VDI 60 l/h 4,3 3,6 7.5b Fuel consumption according to VDI 60 kg/h 3,4 8.2 Operating pressure for attachments bar Oil volume for attachments l/min Sound level at the driver s ear according to EN db(a) ) At 1,5 km/h 2) Computed values Performance data and dimensions are nominal and subject to tolerances. Specifications are subject to change without notice. Please obtain the latest specifications before contracting products.
9 Mast dimensions and rated capacities Model V FV FSV 8FG/DF Lift h Height, mast lowered h Height, mast extended 1) h Height, mast extended 2) h Free lift, without load backrest h [1145] [1295] [1395] [1555] [1745] Free lift, with load backrest h ) Without load backrest 2) With load backrest; Height of standard load backrest is 1220 mm. Data in [ ] are for when A4 piping is selected. Single tyre V FV FSV 8FG/DF30 Tilt range, forward deg Tilt range, backward deg 11(6) 11(6) 11(6) 11(6) 11(6) (6) 11(6) 11(6) 11(6) 11(6) Load capacity, P tyres at 500 mm LC kg Load capacity, SE tyres at 500 mm LC kg Dual tyre V FV FSV 8FG/ DF30 Tilt range, forward deg Tilt range, backward deg 11(6) 11(6) 11(6) 11(6) 11(6) 11(6) (6) 11(6) 11(6) 11(6) 11(6) Load capacity, P tyres at 500 mm LC kg Data in ( ) are for when Cabin Series is selected (minimum front windshield). h 10 s h 2 h7 m 1 b 1 b 10 b 11 h 1 h 6 h 4 h 3 h 23 x m2 y l 2 e Wa l l 1
10 Engine powered forklift 3.5 tonne Truck specifications 02-8FGJF FDJF FDJF Manufacturer TOYOTA TOYOTA TOYOTA 1.2 Model 02-8FGJF FDJF FDJF Drive LPG Diesel Diesel 1.4 Operator type Rider seated Rider seated Rider seated 1.5 Load capacity/rated load Q kg Load centre c mm Load distance, centre of drive axle to fork x mm Wheelbase y mm Service weight kg Identification Weight Tyres Dimensions Performance data Combustion engine Others 1) At 1,5 km/h 2) Computed val 2.2 Axle load, with load, front/rear kg 7250/ / / Axle load, without load, front/rear kg 1690/ / / Tyre - pneumatic (P), pneumatic shaped cushion (SE), solid rubber (R) SE SE SE 3.2 Tyre size, front Tyre size, rear Wheels, number front/rear (x = driven wheels) 2x/2 2x/2 2x/2 3.6 Track width, front b 10 mm Track width, rear b 11 mm Tilt of mast/fork carriage forward/backward a/b deg 6/11 6/11 6/ Height, mast lowered h 1 mm Free lift h 2 mm Lift h 3 mm mm Height, mast extended h 4 mm Height of overhead guard (cab) h 6 mm Seat height h 7 mm Coupling height h 10 mm Overall length l 1 mm Length to face of forks l 2 mm Overall width b 1 mm Fork dimensions s/e/l mm 45/125/ /125/ /125/ Fork carriage DIN , class/type A, B IIIA IIIA IIIA 4.24 Fork-carriage width b 3 mm Ground clearance, with load, below mast m 1 mm Ground clearance, centre of wheelbase m 2 mm Aisle width for pallets 1000x1200 crossways A st mm Aisle width for pallets 800x1200 lengthways A st mm Turning radius W a mm Internal turning radius b 13 mm Travel speed, with/without load km/h 19,0/19,5 16,5/17,0 19,0/19,5 5.2 Lift speed, with/without load m/s 0,43/0,45 0,37/0,40 0,42/0, Lowering speed, with/without load m/s 0,50/0,45 0,50/0,45 0,50/0, Max. drawbar pull, with/without load N 17000/ / / Gradeability, with load 1) 2) % Max. gradeability, with/without load 2) % 20/18 21/19 21/ Service brake Hydraulic Hydraulic Hydraulic 7.1 Engine manufacturer/type 4Y-ECS 1DZ-III (IIIA) 1ZS (IIIB) 7.2 Engine power according to ISO 1585 kw Rated speed 1/min No. of cylinders/displacement cm 3 4/2237 4/2486 3/ a Fuel consumption according to VDI 60 l/h 4,9 3,9 7.5b Fuel consumption according to VDI 60 kg/h 3,8 8.2 Operating pressure for attachments bar Oil volume for attachments l/min Sound level at the driver s ear according to EN db(a) Performance data and dimensions are nominal and subject to tolerances. Specifications are subject to change without notice. Please obtain the latest specifications before contracting products.
11 Mast dimensions and rated capacities Model V FV FSV 8FG/DJF Lift h Height, mast lowered h Height, mast extended 1) h Height, mast extended 2) h Free lift, without load backrest h [1290] [1470] [1570] [1670] [1920] Free lift, with load backrest h ) Without load backrest 2) With load backrest; Height of standard load backrest is 1220 mm. Data in [ ] are for when A4 piping is selected. Single tyre V FV FSV 8FG/DJF35 Tilt range, forward deg Tilt range, backward deg 11(6) 11(6) 11(6) 11(6) 11(6) (6) 11(6) 11(6) 11(6) 11(6) Load capacity, P tyres at 500 mm LC kg Load capacity, SE tyres at 500 mm LC kg Dual tyre V FV FSV 8FG/ DJF35 Tilt range, forward deg Tilt range, backward deg 11(6) 11(6) 11(6) 11(6) 11(6) 11(6) (6) 11(6) 11(6) 11(6) 11(6) Load capacity, P tyres at 500 mm LC kg Data in ( ) are for when Cabin Series is selected (minimum front windshield). h 10 s h 2 h7 m 1 b 1 b 10 b 11 h 1 h 6 h 4 h 3 h 23 x m2 y l 2 e Wa l l 1
12 Standard equipments: SAS (System of Active Stability*) OPS (Operator Presence Sensing) ORS seat (Operator Restraint System) Wide visible mast (V3000 mm) Load backrest (Height: 1220 mm) Long forks (Length: 1000 mm) Long forkbar [Length: 920 mm (8FG/DF15.18); 1020 mm (8FG/DKF20, 8FG/ DF20.25); 1070 mm (8FG/DF30,8FG/DJF35)] 3-way valve (A400) Dual brake system Pneumatic shaped cushion tyres Full hydraulic power steering 7 cyclone air cleaner with snorkel air intake Anti-restart ignition key switch Long life coolant 50% Headlights Rear combination lights Combination meter including self diagnostic system Adjustable tilt steering column Polycarbonate roof Tilt cylinder boots (STD on 1ZS engine only) * = When dual tyres are selected, the Active Control Rear Stabiliz TP-Technical Publications , version 8, TOYOTA MATERIAL HANDLING IN EUROPE, MANAGING THE TOYOTA AND BT MATERIALS HANDLING BRANDS IN EUROPE
Engine Powered Forklift ton
Engine Powered Forklift 1. - 7.0 ton 8FGCU1-30 8FGC3U-70U www.toyota-forklifts. Engine Powered Forklift 1. - 1.7 tonne Truck specifications 8FGCU1 8FGCU18 1.1 Manufacturer TOYOTA TOYOTA 1.2 Model 8FGCU1
Læs mereMotordrevne gaffeltruck 1,5-3,5 ton
www.toyota-forklifts.dk Motordrevne gaffeltruck 1,5-3,5 ton Motordrevne gaffeltruck 1,5-1,75 ton Specifikationer 02-8FGF15 02-8FDF15 02-8FGF18 02-8FDF18 1.1 Producent TOYOTA TOYOTA TOYOTA TOYOTA 1.2 Model
Læs mereMotordrevne gaffeltruck 1,5-3,5 ton
www.toyota-forklifts.dk Motordrevne gaffeltruck 1,5-3,5 ton Motordrevne gaffeltruck 1,5-1,8 ton Specifikationer 06-8FG15F 06-8FD15F 06-8FG18F 06-8FD18F 1.1 Producent Toyota Toyota Toyota Toyota 1.2 Model
Læs mereMotordrevne gaffeltruck ton
www.toyota-forklifts.dk Motordrevne gaffeltruck 3.5-8.0 ton Motordrevne gaffeltruck 3.5-4.0 ton Specifikationer 40-8FD35N 8FG35N 40-8FD40N 8FG40N 1.1 Producent TOYOTA TOYOTA TOYOTA TOYOTA 1.2 Model 40-8FD35N
Læs mereMotordrevne gaffeltruck 3.5-5.0 ton
Motordrevne gaffeltruck 3.5-5.0 ton 7FG/7FD www.toyota-forklifts.eu Motordrevne gaffeltruck 3.5 ton Specifikationer 02-7FG35 42-7FD35 1.1 Producent Toyota Toyota 1.2 Model 02-7FG35 42-7FD35 1.3 Drivenhed
Læs mereElektrisk gaffeltruck 2,0-5,0 ton
www.toyota-forklifts.dk Elektrisk gaffeltruck 2,0-5,0 ton Elektrisk gaffeltruck 2,0-2,5 ton Specifikationer 8FBMKT20 8FBMKT25 8FBMT25 Basisdata Vægt Hjul Dimensioner Ydelsesdata Motor Andet 1.1 Producent
Læs mereElektrisk gaffeltruck 1,5-2,0 ton
Elektrisk gaffeltruck 1,5-2,0 ton 3 hjul www.toyota-forklifts.dk Elektrisk gaffeltruck 1,5-1,6 t Specifikationer 8FBE15T 8FBEK16T 8FBE16T Andet Motor Ydelsesdata Dimensioner Hjul Vægt Basisdata 1.1 Producent
Læs merewww.toyota-forklifts.dk Elektrisk gaffeltruck 1,0-1,5 ton
www.toyota-forklifts.dk Elektrisk gaffeltruck 1,0-1,5 ton Elektrisk gaffeltruck 1,0 ton Specifikationer 7FBEST10 1.1 Producent Toyota 1.2 Model 7FBEST10 1.3 Drivenhed Elektrisk 1.4 Førerplads Siddende
Læs mereModel Bar L/min. kw/hp Liter L (mm) W (mm) H (mm) Connection dba Kg
Vijčani Kompresori L/min. kw/hp Liter L W H Connection dba Kg HGS 2 HGS 3 HGS 4 HGS HGS HGS 11 HGS 15 250 4 320 560 460 350 770 650 530 1150 950 720 1700 1400 10 2250 1960 15 2.2/ 200/300*** 550 **850/1530
Læs mereMobil- og bæltekraner
Kranudlejning Mobil- og bæltekraner Udlejning på time- eller projektbasis Når der skal løftes, hejses og bugseres Op til 280 tons M.J. Eriksson A/S råder over en stor og meget bred flåde af bælte- og mobilkraner,
Læs mereTC-50 / TC-65 / TC-80. TC-65 20m (65 7 ) 1.05m (42 ) 36.4kW (49hp) 10m( o
R TC-50 / TC-65 / TC-80 TRACKED SPECIFICATION: Conveyor Length: Belt Width: Net Engine (Tier 3)Power: Max Discharge height: TC-50 15.7m (51 7 ) 1.05m (42 ) 36.4kW (49hp) 7.6m(24 11 ) @ 27 o TC-65 20m (65
Læs mereMobil- og bæltekraner
Kranudlejning Mobil- og bæltekraner Udlejning på time- eller projektbasis Når der skal løftes, hejses og bugseres Op til 280 tons M.J. Eriksson A/S råder over en stor og meget bred flåde af bælte- og mobilkraner,
Læs mereMobil- og bæltekraner
Kranudlejning Mobil- og bæltekraner Udlejning på time- eller projektbasis Maj 2019 Når der skal løftes, hejses og bugseres Op til 280 tons M.J. Eriksson A/S råder over en stor og meget bred flåde af bælte-
Læs mereNissan Platinum G04 Series vs. Competition National Dealer Conference
Nissan Platinum G04 Series vs. Competition 2008 National Dealer Conference Platinum G04 Series Differentiating the Platinum G04 Series If the competition does not provide (or charges extra for) a particular
Læs mereTC-80 TRACKED CONVEYORS TC-65 / TC-80
R TC-65 / TC-80 TRACKED S TC-80 TC-65 TC-80 Conveyor Length:20m (65 7 ) 23.5m (77 ) Belt Width: 1.05m (42 ) 1.05m (42 ) Net Engine (Tier 3)Power:36.4kW (49hp) 36.4kW (49hp) Max Discharge height:10m(32
Læs mereSolid TYRES for your FORKLIFT TRUCKS
Solid TYRES for your FORKLIFT TRUCKS Find more information at starco.com STARCO Tusker-Unicorn 2017-I INT-eng STARCO IS A REGISTERED TRADEMARK Copyright 2016 by STARCO - all rights reserved FORKLIFT TRUCKS
Læs mereSpeedometer Assembly
BLAZE 150CC Headlight Assembly 1 33100-AAR8-9000 HEADLIGHT ASSEMBLY $69.99 4 34901-F22-9000 HEADLIGHT BULB 3 PRONG $2.99 5 33130-AAR8-9000 HEADLIGHT WIRE HARNESS $8.99 6 38400-AAR8-9000 HEADLIGHT CONTROLLER
Læs mereManual Transmission Remove and Install (2,0 DOHC 8V Engine) ( ) Remove
Manual Transmission Remove and Install (,0 DOHC 8V Engine) (6 4 0) Workshop Equipment Transmission jack Materials Brake fluid (Super Dot 4) ESD-M6C57-A Remove. Standard preparatory measures: Make a note
Læs mereSlot diffusers. Slot diffusers LD-17, LD-18
LD-17, LD-18 Application LD-17 and LD-18 are designed for supply of cold or warm air in rooms with a height between. m and 4 m. They allow easy setting of air deflectors for different modes of operation
Læs merelitronic` Engine Output (SAE J1349): 173 HP / 129 kw Engine Output (ISO 9249): 175 HP / 129 kw
Log Loader A 924 C HD litronic` Operating Weight: 63,90 lb Engine Output (SAE J1349): 173 HP / 129 kw Engine Output (ISO 9249): 17 HP / 129 kw Technical Data Engine Rating per SAE J1349 173 HP (129 kw)
Læs mereSjækel, Green Pin G-4161 Shackle, Green Pin G-4161. Sjækel, Green Pin standard G-4163 / Shackle, Green Pin Standard G-4163.
Sjækel, Green Pin G-4161 Shackle, Green Pin G-4161 Krop og pin fremstillet af højstyrke stål klasse 6 og hærdet. Finish: varmgalvaniseret. Temperaturområde: -20 C op til +200 C. Skruepin type H. Sikkerhedsfaktor
Læs mereSPARE PARTS LIST. RIDERS R316 TXs AWD, , , 2012
SPARE PARTS LIST RIDERS R316 TXs AWD, 966757801, 967152101, 2012 103CM CUTTING DECK R316 TXs AWD, 966757801, 967152101, 2012 103CM CUTTING DECK R316 TXs AWD, 966757801, 967152101, 2012 Ref Part No Description
Læs mereGaffeltruck 5FG/5FD serien
Motordreven gaffeltruck 5,0-8,0 tons Gaffeltruck 5FG/5FD serien www.toyota-forklifts.dk MATERIAL HANDLING stronger together STABILITET OG YDEEVNE Toyota præsenterer her en avanceret trucktype til et marked,
Læs mereDOOR TECHNOLOGY - ORDER CATALOG. Lift&Slide Hardware
DOOR TECHNOLOGY - ORDER CATALOG Lift&Slide Hardware Door Lift&Slide Multipoint Hardware Locking System Solid Product brass Information handle & 45mm plate series Application Range of applications for
Læs mereManeurop reciprocating compressors
MAKING MODERN LIVING POSSIBLE Maneurop reciprocating compressors MT - MTZ - LTZ - NTZ - 60 z R404A - R507A - R407C - R134a - R22 QUICK REFERENCE PRODUCT RANGE Nominal voltage M-BP Applications LBP Applications
Læs mereTechnical data sheet FT026EN_B_0514_MT625.
Technical data sheet FT026EN_B_0514_MT625 www.manitou.com Rough terrain load chart MT 625 Lifting Max. capacity Max. lifting height Break-out force with bucket (ISO 8313) Unladen time Lifting Lowering
Læs mereImproving Lives PARTS CATALOG. Updated: 07/17/19
Improving Lives PARTS CATALOG Updated: 07/17/19 6 ALUMINUM ROLLATOR 13 1 3 2 8 12 10 5 9 14 11 15 4 7 6-2- 6 ALUMINUM ROLLATOR Fig. Description Part No. 1 Probasics 6" Alum. Rollator Left Hand Brake System
Læs mereCOMPLETE ENGINE PARTS LIST
COMPLETE ENGINE PARTS LIST for CRF50F Please confirm engine spec. CODE NO, TRANSMISSION GENERATOR 3a CH-200-1129301 NO-IGNITION TYPE 3b CH-200-1129302 3 SPEED CLOSED TRANSMISSION INNER ROTOR KIT TYPE-1
Læs mereHudevad P5 Easy Clean
Technical datasheet Key benefits Rengøring Unique tilting front Radiator front tilts away from the wall for easy access to cleaning the back of the radiator Classic Hudevad design Trademark Hudevad design
Læs mereWIO200A Water in oil sensor
WIO200A Water in oil sensor Datasheet 111688-900 Rev. 1.03 Dato: 2012-06-01 03-01-0501-CRJ-04 Side 1 af 13 Technical Sensor Data Order Order number A01-110-0101-01 Output Analogue output 4 20 ma (galvanic
Læs mereNo. Part No. Description Q ty Remarks Cleaner Assembly (Includes Fig.1,2,4 & 5) Cap Tube, inlet Filter, air cleane
No. Part No. Description Q ty Remarks 1 050601 Cleaner Assembly (Includes Fig.1,2,4 & 5) 2 050602 Cap 3 050603 Tube, inlet 4 050604 Filter, air cleaner 5 050605 Net, air cleaner No. Part No. Description
Læs mereHigh Voltage AC & DC Film Capacitors
RoHS COMPLIANT High Voltage AC & DC Film Capacitors Aerovox high voltage capacitors are constructed with metallized polypropylene film and are available in round or oval aluminum cases with four-blade
Læs mereDiamond Core Drilling
Diamond Core Drill ZIZ-250Pro Product Description Diamond core drill is a tool used for drilling holes on reinforced concrete, rocks and fire-proof materials. It features in high-efficiency, smooth and
Læs mereSpare parts list ( ) HD 3.1/31 P
Spare parts list (15751070) HD 3.1/31 P 2010-07-07 www.kaercher.com EN Spare parts list HD 3.1/31 P (59704780)... 6 10 Frame (01031070)... 7 20 Pump set (01085070)... 9 21 Cylinder head (01085080)...
Læs mereT1136A (1991) Page 1 of 30 BRAKE AND REAR MOWER LIFT T1136A (1991) Page 2 of 30 BRAKE AND REAR MOWER LIFT Ref # Part Number Qty Description 1 123436X "ROD,PARK BRAKE" 2 123437X "BRKT,PARK BRAKE" 3 122504X
Læs mereARDOUR JJ125T-23 PARTS LIST
ARDOUR JJ125T-23 PARTS LIST 1 50100-GP10-0000B FRAME BODY(50CC 4T) 1 1 50100-GP10-0000A FRAME BODY(50CC 2T) 1 1 50100-GP10-0000C FRAME BODY(125CC) 1 2 50350-GP10-000A HANGER OF ENGINE(50CC 2T) 1 2 50350-GP10-000B
Læs mereBandager Press-on bands
Bandager Press-on bands Ø100-1.016 mm 280-18.500 kg Bandager med polyurethan (shore 92A) eller med elastisk gummi (shore 65A). Kan leveres med ståltrådsindlæg, på stålring eller komplet med kugleleje-
Læs mereHudevad P200. Technical datasheet
Technical datasheet Key benefits Low, streamlined design Ideal in front of glazing to prevent cold draughts Available in two depths For high flexibility in usage Historical Kundenedfald Grøn energi Flat
Læs mereTopdresser 1800 for Workman 3000/4000 Series
Form No. Topdresser 1800 for Workman 3000/4000 Series Model No. 44225 90001 and Up Parts Catalog Ordering Replacement Parts To order replacement parts, please supply: the part number, the quantity, and
Læs mereErgonomisk løft. Specials. www.certex.dk. Højdestabler kasser High stacking boxes. Rulle løfter med 90º tilt Roll handling with 90º tilt
Ergonomisk løft Højdestabler kasser High stacking boxes Rulle løfter med 90º tilt Roll handling with 90º tilt Kuffert løfter Baggage handling Håndtering af postpakker Handling of parcels Rudehåndtering
Læs mereEFFICIENCY 17 SEER TWO STAGE AIR CONDITIONER WITH OBSERVER
ENVIRONMENTALLY SOUND REFRIGERANT TCA7 SmartComfort TXT+ Product Specifications HIGH EFFICIENCY 17 SEER TWO STAGE AIR CONDITIONER WITH OBSERVER COMMUNICATING CONTROL SYSTEM 2 THRU 5 TONS SPLIT SYSTEM 208
Læs mereNo Part no. Description Q ty Remarks No Part no. Description Q ty Remarks Filter, air cleaner Air cleaner 1 Assy 2 050
1 2 2 3 No Part no. Description Q ty Remarks No Part no. Description Q ty Remarks 1 050604-1 Filter, air cleaner 1 3 050601-1 Air cleaner 1 Assy 2 050603-1 Tube, inlet 1 No. Part No. Description Q ty Remarks
Læs mereS M Illust.No. Part Name DENSO P/N Manu. P/N QTY I/C Start End Remarks
DENSO P/N : 965-351 Manufacturer : TOYOTA Parts List Page 1 Compo. P/N: 965-351 Assy P/N: 965-351 S M Illust.No. Part Name DENSO P/N Manu. P/N QTY I/C Start End Remarks PUMP ASSY, INJECTI 965-351 221-6E25-2
Læs mereSP40G001 40GKX GMC. Split system "Global Cassette" indoor unit. Spare parts 40GKX GKX
SP0G00 0GKX GMC Split system "Global Cassette" indoor unit Spare parts 0GKX 0-08-0 0GKX 08-08-05-060 0GKX 0-08-0 Split system "Global Cassette" indoor unit (Without electric heater) 8 7 9 6 5 0 5 6 7 8
Læs mereRasmus Banke Banke Accessory Drives
Dakofa 2014 Rasmus Banke Banke Accessory Drives Agenda Lidt om Banke Accessory Drives Baggrund og produkter Meldgaard og Ringkøbing-Skjern kommune idriftsætter landets første Gas/El-hybrid Skraldebiler
Læs merePILLE PRESSE. developed properly for pellet production and all technologies and mechanical solutions are chosen to
PILLE PRESSE N-ECO pellet mill machine is projected and manufactured in accordance with CE norm about construction s prescriptions and safety. With N-ECO you will save money and get lower pellet production
Læs mereParts catalogue Rabbit Mower
OREC ISSUED NO. RM97EU-1 Parts catalogue Rabbit Mower (EXPORT MODEL) RM97 MODEL CODE RM97 0292- CONTENTS FRAME 1-12 TRANSMISSION 13-21 HST 22-23 HANDLE 24-26 FRONT 27-30 CONTROL 31-35 CUTTING 36-42 SEAT
Læs mereWhere and why? - How to use welded branches
O-LETS 1.1.6.1 Where and why? - How to use welded branches Welded Tee 1. Everywhere where welded branches are recommended O-let 2. O-lets replace the welded Tee coasing a reduction of material and labour
Læs mereUni-Valve A /S SCOTCH-YOKE. Pneumatisk aktuator - Pneumatic actuator. Type UNI-PD - Type UNI-PS (UNI-PD/PS 50, 70, 85, 100, 125, 150, 200)
UniValve A /S V E N T I L E R & I N S T R U M E N T E R Telefon (+45) 43 43 82 00 Telefax (+45) 43 43 74 75 mail@univalve.com www.univalve.com Pneumatisk aktuator Pneumatic actuator SCOTCHYOKE Type UNIPD
Læs mereKatalog 2016 Udlejning
Katalog 2016 Udlejning HUSK! Vi har også salg af lifte Etableret 1964 52 år i luften fra træpleje til professionel partner Henrik Ravn fik en god idé da han i 1964 besluttede at anvende bomlifte til hans
Læs mereFREIGHTLINER. engine coolant reservoir. also available: COVERAGE FOR. Engine Coolant Reservoir. EGR Valve. EGR Cooler. Headlight Assembly
COVERAGE FOR engine coolant reservoir : 603-5207 : A0528531000, A0528531001, A0528531002 Make: Freightliner Years: 2016-12 Model: Business Class M2, M2 106, M2 112 also available: See back for complete
Læs mereDocument number: Document title: Code: Designation: Position: pe42.45-p gh Wiring diagram of electronic stability program (ESP)
Document number: Document title: pe4.4-p-000-gh Wiring diaam of electronic stability proam (ESP) Code: Desiation: Position: Instrument cluster e BS MIL e ETS MIL e6 ETS warning lamp e4 BS/ESP malfunction
Læs mereAFL10-LED-KIT Architectural FloodLight HID to LED Upgrade Kit kl_afl10_ledkit_spec.pdf
JOB NOTES TYPE APPROVALS FEATURES Three beam patterns Wide, Vertical and Narrow Flood generate high efficiencies and outstanding uniformity of illumination. 350 or 500mA current 3000K, 4000K or 5000K color
Læs mereNærskibsfart med bundlinieeffekt: Klima og miljø. Hans Otto Kristensen. hohk@mek.dtu.dk. Tlf: 45 25 13 95 alt. 40 45 90 20
Nærskibsfart med bundlinieeffekt: Klima og Hans Otto Kristensen hohk@mek.dtu.dk Tlf: 45 25 13 95 alt. 4 45 9 2 Sidste nyt vedr. TEMA 21 ang. lastbiler Effekt og fartafhængighed for skibe Baggrund for DTU
Læs mereGX270UT2(RH26) E-11 RECOIL STARTER (1)
Page 1 sur 26 GX270UT2(RH26) E-11 RECOIL STARTER (1) 001 28400-Z5K-003ZA STARTER ASSY., RECOIL *R280* 1 002 28410-ZE2-W01ZN CASE COMP., RECOIL STARTER *R280 * 1 003 28421-ZE2-W01 PULLEY, RECOIL STARTER
Læs mereProgrammable pressure transmitters PTM
Programmable pressure transmitters PTM Version: 07.01.2016 Technical Specifications Pressure measuring range (bar) 0.1... 0.5 > 0.5... 2 > 2... 25 Overpressure 3 bar 3 x FS ( 3 bar) 3 x FS Burst pressure
Læs mereControl cable YSLY-JZ/-JB/-OZ/-OB
Control cable YSLY-JZ/-JB/-OZ/-OB CPR-performance: Eca Conductor material: copper, bare Conductor class: class 5 = fine stranded Insulation: PVC TI1 Sheathing material: PVC YM2 Colour outer sheath: grey
Læs mereWindPRO version 2.6.0.74 Beta Oct 2007 Project:
(MD) garanterer ikke og kan ikke holdes ansvarlig for eventuelle fejl eller indpro version 2.6..74 Beta Oct 27 Project: PARK - Main Result Calculation: 2 x V8 2M 78m navhøjde ake Model.O. Jensen (RIØ/MD)
Læs mereMontage bjælkeklipper BM 870 III Art. No / BM 875 III Art. No
Montage bjælkeklipper BM 870 III Art. No. 112871 / BM 875 III Art. No. 112872 Assembly scythe mower BM 870 III Art. No. 112871 / BM 875 III Art. No. 112872 Motor og driv enhed. Engine and drive unit. Løsdele
Læs mereSpare parts ASC 3000 G V11 SKU:
Spare parts ASC 3000 G Prozessanzeige LED ASC Art.Nr.:4441600088 Low pressure gauge ASC Art.Nr.:4440600046 Cover gauge group Art.Nr.:4443900278 Printer ASC G-Version Art.Nr.:4441600178 Paper for printer
Læs mereGreen Passenger Ferries
- Your professional maritime partner Faaborg Værft A/S Værftsvej 7, DK-5600 Faaborg, Tlf: +45 62 61 21 10 www.faaborg-vaerft.dk, fv@faaborg-vaerft.dk Sjövägen delivered to Ballerina AB located in Stockholm,
Læs mereProduct. Information. A. u. K. Müller. 2/2-way Drain Valve NC, DN 40. Series Characteristics. Possible approvals
Solenoid valves Control valves Special valves and systems GmbH & Co. KG Dresdener Str. 162 D-40595 Düsseldorf/Germany Tel.: +49(0)1-73-0 Fax: +49(0)1-73-281 e-mail: info@akmueller.de Internet: www.akmueller.de
Læs mereBODY PARTS LIST OF B08(TWIN LIGHT 50cc)
BODY PARTS LIST OF B08(TWIN LIGHT 50cc) VENTO RX8 BO8 DUAL LIGHT STEERING 4000B92000 HANDLE COMP. 2 B059004565 BOLT 0.25 45MM 3 B04702555 U NUT 0.25MM 4 4000T09000 L. GRIP 5 4020T09000 R. GRIP ASSY. 6
Læs mereGX270UT2(WKT) E 11 RECOIL STARTER (1)
GX270UT2(WKT) E 11 RECOIL STARTER (1) 001 28400 Z5K 305ZA STARTER ASSY., RECOIL (COO) (FOR U.S.A.) 1 002 28410 ZE2 W01ZN CASE COMP., RECOIL STARTER *R280 * 1 002 28410 ZE2 W01ZN CASE COMP., RECOIL STARTER
Læs mere01) BACK FRAME ASSEMBLY BOM ( )
NO. PART NO. PART DESCRIPTION QTY. VENTE 01-3191-1537-00 BACK FRAME WELDING 1 01-3190-0071-00 BACK PLATE 1 01-3190-0116-00 BACK GROUND PLATE 1 01-3190-0119-00 ANGLE BAR (LONG) 2 01-3190-0120-00 ANGLE BAR
Læs mereHP LaserJet Pro M102w Laser
HP LaserJet Pro M102w Laser Description HP LaserJet Pro M102w - Printer - monochrome - laser - A4/Legal - 1200 dpi - up to 22 ppm - capacity: 160 sheets - USB 2.0, Wi-Fi Features Designet til effektivitet
Læs merePEMS RDE Workshop. AVL M.O.V.E Integrative Mobile Vehicle Evaluation
PEMS RDE Workshop AVL M.O.V.E Integrative Mobile Vehicle Evaluation NEW - M.O.V.E Mobile Testing Platform Key Requirements for Measuring Systems Robustness Shock / vibrations Change of environment Compact
Læs mereSjækler, Green Pin G-4151 / Shackles, Green Pin G-4151
Sjækler TVS / Shackles TVS TVS Varenr. / Stock no. WLL t a mm b mm c mm ød mm e mm t mm Vægt / Weight kg TVS6 1,12 13,5 30 10 10 20 29 0,10 TVS8 2,00 17,0 39 13 12 24 35 0,18 TVS10 3,15 23,0 49 15 16 31
Læs merePos Vare nr. / Part no. Qty Beskrivelse Description 1 861075 1 Chassis Chassis 2 861076 1 Flagholder Flagholder 3 861121 1 Møtrik M8 Nut M8 4 861122
Chassis Chassis 1 861075 1 Chassis Chassis 2 861076 1 Flagholder Flagholder 3 861121 1 Møtrik M8 Nut M8 4 861122 4 Dæmper Cushion 5 861123 1 Bagagebærer Loading bracket 6 861124 4 Flangebolt M6 x 16 Flange
Læs mereInstallation Venligst bemærk, håndpumpen kun må monteres i lodret position.
HP-1. HP-3. HP-. Hand Operated Pump Håndpumpe The HP pump is a single acting hand operated pump made of stainless steel St.1.431 making it particularly applicable within the food industry and in environmentally
Læs mereConstant Terminal Voltage. Industry Workshop 1 st November 2013
Constant Terminal Voltage Industry Workshop 1 st November 2013 Covering; Reactive Power & Voltage Requirements for Synchronous Generators and how the requirements are delivered Other countries - A different
Læs mereCNG FILTRATION. High Efficiency CNG Vehicle Filtration. Trucks Vans Cars.
CN FILTRATION Trucks Vans Cars High Efficiency CN Vehicle Filtration www.xebecinc.com Compressed Natural as (CN) used for vehicle applications must be free of solid material, water and oil. Yet the heart
Læs mereOprettet den 6. september :46. Teknisk specifikation 280 TJ. Diesel
Oprettet den 6. september 2019 11:46 Teknisk specifikation 280 TJ Diesel Kapaciteter Metrisk Britiske mål Arbejdshøjde 27.75 m 91 ft 1 in Platformshøjde 25.75 m 84 ft 6 in Horisontal udstrækning 21.45
Læs mereInstallation Venligst bemærk, håndpumpen kun må monteres i lodret position.
HP-1. HP-3. HP-. Hand Operated Håndpumpe The HP pump is a single acting hand operated pump made of stainless steel St.1.431 making it particularly applicable within the food industry and in environmentally
Læs mereScreened electronic cable LiYCY
Screened electronic cable LiYCY Conductor material: copper, bare Conductor class: class 5 = fine stranded Insulation: PVC Screen: copper braid, tinned Screen coverage: 70 % Sheathing material: PVC Flame-retardant:
Læs mereAlle typer af standard løfteåg kan vi samtidig tilbyde at tilpasse konkrete behov og ønsker.
Standard løfteåg type LO Standard Lifting Beam type LO Standard løfteåg type LF Standard Lifting Beam type LF Standard løfteåg type K Standard Lifting Beam type K Løfteåg Ved at anvende et løfteåg kan
Læs mereModel Brugsanvisning Instruction manual
Model 11560 Brugsanvisning Instruction manual DK GB CAMPINGTOILET Dele Toiletlåg Toiletsæde Vandpåfyldningsstuds Pumpestempel Låsebeslag 10 liters skylletank Tømmetud Skyderventil Niveauindikator 20 liters
Læs mereOprettet den 6. september :37. Teknisk specifikation MAN GO 12. Diesel
Oprettet den 6. september 2019 11:37 Teknisk specifikation MAN GO 12 Diesel Kapaciteter Metrisk Britiske mål Arbejdshøjde 11.91 m 39 ft 1 in Platformshøjde 9.91 m 32 ft 6 in Horisontal udstrækning 6.69
Læs mereVIN Nmber: RF3SA3100AT000052
VIN Nmber: RFSA00AT0000 0 D-: CYLINDER & CYLINDER HEAD 0 Retainer, Valve, Spring N-000 Spring, Valve, Outer N-000 Clip, Retainer N-000 Seal, Valve 0N-000 Sensor, Thermosatic 0A-000 Plug, Spark 0R-000 O-Ring
Læs mereProportional pressure regulators VEAA
Key features Innovative Versatile Reliable Easy to install Silent operation Very low power consumption High precision Integrated piezo technology In-line valves Sub-base valves Simple electrical and pneumatic
Læs mereMontage bjælkeklipper BM 5001R Art. No. 112870. Assembly scythe mower BM 5001R Art. No. 112870
Montage bjælkeklipper BM 5001R Art. No. 112870 Assembly scythe mower BM 5001R Art. No. 112870 Løsdele pose pakket, afdækninger, skaftkonsol, skaft højre og venstre. Lose parts plastic bag, covers, handle
Læs mere135cc* displacement Honda GCV-135 engine 21" cutting width Works on slopes to 45º Foldable handle Cutting height 2-3" CARB compliant
HVT52 HOVERING TRIMMER 135cc* displacement Honda GCV-135 enine 21" cuttin width Works on slopes to 45º Foldable handle Cuttin heiht 2-3" * = Enine power values are as rated by the manufacturer. HVT52 H
Læs mereHIGH EFFICIENCY 16 SEER TWO STAGE HEAT PUMP WITH OBSERVER
ENVIRONMENTALLY SOUND REFRIGERANT TCH6 SmartComfort TXT+ Product Specifications HIGH EFFICIENCY 16 SEER TWO STAGE HEAT PUMP WITH OBSERVER COMMUNICATING CONTROL SYSTEM 2 THRU 5 TONS SPLIT SYSTEM 208 230
Læs mere4-hjulede elektriske gaffeltruck 1.6-2.0 t
4hjulede elektriske gaffeltruck 1.6 2.0 t FB16K FB18K FB20KC 1.1 1.2 1.3 1.4 1.5 1.6 1.8 1.9 2.1 2.2 2.3 3.1 3.2 3.3 3.5 3.6 3.7 4.1 4.2 4.3 4.4 4.5 4.7 4.8 4.12 4.19 4.20 4.21 4.22 4.23 4.24 4.31 4.32
Læs mereSYNOLOGY DS418j 4-bay NAS server
SYNOLOGY DS418j 4-bay NAS server Description Synology Disk Station DS418j - NAS server - 4 bays - RAID 0, 1, 5, 6, 10, JBOD - RAM 1 GB - Gigabit Ethernet - iscsi Stream indhold til dit TV Gør din Synology
Læs mereSpare parts ASC 3500 G LE V6 SKU:
Front view ASC 3500 G LE Process display 4. LED ASC Art.Nr.:4441600184 LP gauge ASC Art.Nr.:4440600221 Cover gauge group Art.Nr.:4443900278 Printer ASC G-Version Art.Nr.:4441600178 Paper for printer 4x
Læs mereZAXIS-3 series Short rear-end swing version
ZAXIS-3 series Short rear-end swing version HYDRAULIC EXCAVATOR Model Code: ZX85US-3 Engine Rated Power: 39.4 kw (52.8 HP) Operating Weight: 7 800-8 400 kg Backhoe Bucket: SAE, PCSA Heaped: 0.13-0.33 m
Læs merePOS QTY PARTNUMBER BESKRIVELSE DESCRIPTION CYLINDER MED KRUMTAP ENGINE GLIDEBØS CRANKCASE KRUMTAP CRANKSHAFT
Model: XCS2600 Part Number: 90068149 Year: 2019 1 1 441498 CYLINDER MED KRUMTAP ENGINE 2 1 441499 GLIDEBØS CRANKCASE 3 1 441500 KRUMTAP CRANKSHAFT COMPONENTS 4 2 419754 KUGLELEJE 15X35X11 BALL BEARING
Læs mereSamsung Xpress SL-M2026W Laser
Samsung Xpress SL-M2026W Laser Description Samsung Xpress SL-M2026W - Printer - monochrome - laser - A4/Legal - 1200 x 1200 dpi - up to 20 ppm - capacity: 150 sheets - USB 2.0, Wi-Fi(n) Features Problemfri
Læs mereIntegrated Engine, Vehicle, and Underhood Model of a Light Duty Truck for VTM Analysis
Integrated Engine, Vehicle, and Underhood Model of a Light Duty Truck for VTM Analysis GT-SUITE Conference 2009 Dr. Philip Keller Dr. Wolfgang Wenzel Dr. Michael Becker December 7, 2009 Outline Introduction
Læs mereOG-3600 Series Fiber Optic Transport for opengear card frame platform w/ SNMP Management
FEATURES w w 4 HDSDI 3G 8x8 Line/AES Genlock Time Code, GPIO, Data APPLICATIONS Studio Links Signal Trunking Signal distribution Campus interconnects Transmission links Telco circuits w w Outside Broadcast
Læs mere#1 steering. #2 Front wheel assembly
#1 steering Item Part No. Description QTY. per Vehicle 1 608.1 Steering: Front Fork Inverted "T" 1 2 600 Steering: 1 Topside: Upper nut(combo 607) 1 3 602.2 Steering: 2 Topside: threaded metal race covering
Læs mereTechnical Specifications
Technical Specifications Pressure measuring range (bar) 0.1... 0.5, (1) > 0.5... 2 > 2... 25 Overpressure 3 bar 3 x FS ( 3 bar) 3 x FS Burst pressure > 200 bar > 200 bar > 200 bar Accuracy, (5), (± % FS)
Læs mereYamaha Motorcycle Page: 1 of 44
1 CYLINDER HEAD Yamaha Motorcycle Page: 1 of 44 5VK-E-00-00 4G0-3--00 93440-X00-00 956-6-00 5VK-1-00-00 9-0-00 9-0-00 9-0-00 9-0-00 9-6J9-00 947-00X-00 936-X00-00 5VK-E85-00-00 932-96X00-00 9-X-00 965-4-00
Læs mereENGINE PARTS DIAGRAM / PARTS LIST EVO-SYSTEM 200 ENGINE.
ENGINE PARTS DIAGRAM / PARTS LIST EVO-SYSTEM 00 ENGINE. Evo-System breakdown Frame, Engine & Annular Ring. Frame. Nut. Bolt. WingNut. Internal bolt. Wheel. Cover. Handle 9. Centre leg 0. Frame leg. Female
Læs mereLIFTING BEAMS, BINS & CONTAINERS PALLEGAFLER, MANDSKABS KURVE & CONTAINERE
LIFTING BEAMS, BINS & CONTAINERS PALLEGAFLER, MANDSKABS KURVE & CONTAINERE INDEX CONTAINER SPREADER - 20 & 40 MANUAL PALLET FORKS -TELESCOPIC AUTOMATIC PALLET FORKS - BALANCE PALLET FORKS - TELESCOPIC
Læs merePILLE PRESSE. 1 of 8. Salg & Service PE Maskiner Ans ApS Søgade 9 DK-8643 Ans By Tlf. +45 8687 0535 Fax +45 8687 0776 www.pemaskiner.
PILLE PRESSE Lav dine egne piller! N-MICRO pellet machine is the easiest way to Pellet. N-MICRO has been projected and developed properly for home and small pellet production, so every carpenter, farmer
Læs mereMotorsykkel Scooter Sykkel Demosykler Reservedeler 1 Frame - - - - - 8135811 0 Detaljer 2 Painted cradle - - - - - 8135808 0 Detaljer 3 Fairing support bow - - - - - 8135494 0 Detaljer 4 Saddle support,
Læs mereHP Envy 5030 All-in-One Blækprinter
HP Envy 5030 All-in-One Blækprinter Description HP Envy 5030 All-in-One - Multifunction printer - color - ink-jet - Letter A (216 x 279 mm)/a4 (210 x 297 mm) (original) - A4/Legal (media) - up to 8 ppm
Læs mereCYLINDER HEAD CONTINUED ON NEXT FRAME. Ref. Part No. Number Description Qty Remarks
A1 A2 A3 A4 CYLINDER HEAD 1 3TB-11101-02-00 CYLINDER HEAD ASSY...... 1 2 4H7-11133-10-00. GUIDE, INTAKE VALVE..... 4 3 93440-12052-00. CIRCLIP................. 4 4 90116-06475-00. BOLT, STUD.............
Læs mere