Olie- og naturgasindustrien Faste offshorekonstruktioner af stål

Transkript

1 Dansk standard DS/EN ISO udgave Olie- og naturgasindustrien Faste offshorekonstruktioner af stål Petroleum and natural gas industries Fixed steel offshore structures

2 DS/EN ISO København DS projekt: ICS: Første del af denne publikations betegnelse er: DS/EN ISO, hvilket betyder, at det er en international standard, der har status både som europæisk og dansk standard. Denne publikations overensstemmelse er: IDT med: ISO 19902:2007. IDT med: EN ISO 19902:2007. DS-publikationen er på engelsk. Denne publikation erstatter: DS 449 Engelsk:1984, DS 449:1983, DS Engelsk:1984 og DS 449.2:1983. DS-publikationstyper Dansk Standard udgiver forskellige publikationstyper. Typen på denne publikation fremgår af forsiden. Der kan være tale om: Dansk standard standard, der er udarbejdet på nationalt niveau, eller som er baseret på et andet lands nationale standard, eller standard, der er udarbejdet på internationalt og/eller europæisk niveau, og som har fået status som dansk standard DS-information publikation, der er udarbejdet på nationalt niveau, og som ikke har opnået status som standard, eller publikation, der er udarbejdet på internationalt og/eller europæisk niveau, og som ikke har fået status som standard, fx en teknisk rapport, eller europæisk præstandard DS-håndbog samling af standarder, eventuelt suppleret med informativt materiale DS-hæfte publikation med informativt materiale Til disse publikationstyper kan endvidere udgives tillæg og rettelsesblade DS-publikationsform Publikationstyperne udgives i forskellig form som henholdsvis fuldtekstpublikation (publikationen er trykt i sin helhed) godkendelsesblad (publikationen leveres i kopi med et trykt DS-omslag) elektronisk (publikationen leveres på et elektronisk medie) DS-betegnelse Alle DS-publikationers betegnelse begynder med DS efterfulgt af et eller flere præfikser og et nr., fx DS 383, DS/EN 5414 osv. Hvis der efter nr. er angivet et A eller Cor, betyder det, enten at det er et tillæg eller et rettelsesblad til hovedstandarden, eller at det er indført i hovedstandarden. DS-betegnelse angives på forsiden. Overensstemmelse med anden publikation: Overensstemmelse kan enten være IDT, EQV, NEQ eller MOD IDT: Når publikationen er identisk med en given publikation. EQV: Når publikationen teknisk er i overensstemmelse med en given publikation, men præsentationen er ændret. NEQ: Når publikationen teknisk eller præsentationsmæssigt ikke er i overensstemmelse med en given standard, men udarbejdet på baggrund af denne. MOD: Når publikationen er modificeret i forhold til en given publikation.

3 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN ISO December 2007 ICS English Version Petroleum and natural gas industries - Fixed steel offshore structures (ISO 19902:2007) Industries du pétrole et du gaz naturel - Structures en mer fixes en acier (ISO 19902:2007) This European Standard was approved by CEN on 3 November Erdöl- und Erdgasindustrie - Gegründete Stahlplattformen (ISO 19902:2007) CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 19902:2007: E

4 EN ISO 19902:2007 (E) Contents Page Foreword...3 2

5 EN ISO 19902:2007 (E) Foreword This document (EN ISO 19902:2007) has been prepared by Technical Committee ISO/TC 67 "Materials, equipment and offshore structures for petroleum and natural gas industries" in collaboration with Technical Committee CEN/TC 12 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2008, and conflicting national standards shall be withdrawn at the latest by June Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 19902:2007 has been approved by CEN as a EN ISO 19902:2007 without any modification. 3

6

7 INTERNATIONAL STANDARD ISO First edition Petroleum and natural gas industries Fixed steel offshore structures Industries du pétrole et du gaz naturel Structures en mer fixes en acier Reference number ISO 19902:2007(E) ISO 2007

8 ISO 19902:2007(E) PDF disclaimer PDF files may contain embedded typefaces. In accordance with Adobe's licensing policy, such files may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading a PDF file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create the PDF file(s) constituting this document can be found in the General Info relative to the file(s); the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the files are suitable for use by ISO member bodies. In the unlikely event that a problem relating to them is found, please inform the Central Secretariat at the address given below. This CD-ROM contains the publication ISO 19902:2007 in portable document format (PDF), which can be viewed using Adobe Acrobat Reader. Adobe and Acrobat are trademarks of Adobe Systems Incorporated. COPYRIGHT PROTECTED DOCUMENT ISO 2007 All rights reserved. Unless otherwise specified, no part of this CD-ROM may be reproduced, stored in a retrieval system or transmitted in any form or by any means without prior permission from ISO. Requests for permission to reproduce this product should be addressed to ISO copyright office Case postale 56 CH-1211 Geneva 20 Switzerland Internet Reproduction may be subject to royalty payments or a licensing agreement. Violators may be prosecuted. ii ISO 2007 All rights reserved

9 ISO 19902:2007(E) Installation If this publication has been packaged as a zipped file, do NOT open the file from the CD-ROM, but copy it to the desired location in your local environment. Once the file has been copied to your local environment, open the file to unzip its contents. For compound documents (e.g. HTML documents comprising several files or folders, documents that have been subdivided owing to the total file size, etc.), in order for the links between documents to function properly, the file and folder names must be maintained and all the files stored in the same folder. Where the zip file contains a Readme file, it is essential to consult this file to understand the way in which the document has been structured. ISO 2007 All rights reserved iii

10 ISO 19902:2007(E) ICS ISO 2007 All rights reserved