Specifikationer for drikkevandsinstallationer
|
|
- Bo Kjeldsen
- 8 år siden
- Visninger:
Transkript
1 Dansk standard DS/EN 806-5: udgave Specifikationer for drikkevandsinstallationer i bygninger Del 5: Drift og vedligehold Specifications for installations inside buildings conveying water for human consumption Part 5: Operation and maintenance
2 DS/EN 806-5:2013 København DS projekt: M ICS: Første del af denne publikations betegnelse er: DS/EN, hvilket betyder, at det er en europæisk standard, der har status som dansk standard. Denne publikations overensstemmelse er: IDT med: EN 806-5:2012. DS-publikationen er på dansk og engelsk. Denne publikation erstatter: DS/EN 806-5:2012 som kun forelå i engelsksproget version. Der er ikke foretaget ændringer i denne nye udgave, ud over at den danske oversættelse er indføjet. I tilfælde af tvivl om korrektheden af den danske oversættelse henvises til den engelske version. DS-publikationstyper Dansk Standard udgiver forskellige publikationstyper. Typen på denne publikation fremgår af forsiden. Der kan være tale om: Dansk standard standard, der er udarbejdet på nationalt niveau, eller som er baseret på et andet lands nationale standard, eller standard, der er udarbejdet på internationalt og/eller europæisk niveau, og som har fået status som dansk standard DS-information publikation, der er udarbejdet på nationalt niveau, og som ikke har opnået status som standard, eller publikation, der er udarbejdet på internationalt og/eller europæisk niveau, og som ikke har fået status som standard, fx en teknisk rapport, eller europæisk præstandard DS-håndbog samling af standarder, eventuelt suppleret med informativt materiale DS-hæfte publikation med informativt materiale Til disse publikationstyper kan endvidere udgives tillæg og rettelsesblade DS-publikationsform Publikationstyperne udgives i forskellig form som henholdsvis fuldtekstpublikation (publikationen er trykt i sin helhed) godkendelsesblad (publikationen leveres i kopi med et trykt DS-omslag) elektronisk (publikationen leveres på et elektronisk medie) DS-betegnelse Alle DS-publikationers betegnelse begynder med DS efterfulgt af et eller flere præfikser og et nr., fx DS 383, DS/EN 5414 osv. Hvis der efter nr. er angivet et A eller Cor, betyder det, enten at det er et tillæg eller et rettelsesblad til hovedstandarden, eller at det er indført i hovedstandarden. DS-betegnelse angives på forsiden. Overensstemmelse med anden publikation: Overensstemmelse kan enten være IDT, EQV, NEQ eller MOD IDT: Når publikationen er identisk med en given publikation. EQV: Når publikationen teknisk er i overensstemmelse med en given publikation, men præsentationen er ændret. NEQ: Når publikationen teknisk eller præsentationsmæssigt ikke er i overensstemmelse med en given standard, men udarbejdet på baggrund af denne. MOD: Når publikationen er modificeret i forhold til en given publikation.
3 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN February 2012 ICS English Version Specifications for installations inside buildings conveying water for human consumption - Part 5: Operation and maintenance Spécifications techniques relatives aux installations d'eau destinée à la consommation humaine à l'intérieur des bâtiments - Partie 5: Exploitation et maintenance Technische Regeln für Trinkwasser-Installationen - Teil 5: Betrieb und Wartung This European Standard was approved by CEN on 19 November CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 806-5:2012: E
4 EN 806-5:2012 (E) Contents Page Foreword Scope...5 Normative references...5 Terms and definitions...7 General...7 Documentation...7 Operation...8 Interruptions to operation and disconnection...8 Resumption of supply Damage and faults Change in water quality Insufficient water supply Noise emission Alterations, extensions and refurbishment Accessibility of installation components Maintenance Annex A (normative) Frequencies for inspection and maintenance of components for potable water installations Annex B (normative) Inspection and maintenance procedures B.1 Air gaps (protection device family A) B.2 Pipe interrupters (protection unit family D type C) B.3 Backflow preventer with controllable reduced pressure zone (protection unit BA) B.4 Backflow preventer with different non-controllable pressure zones (protection unit CA) B.5 Controllable antipollution check valves (protection units EA and EC) B.6 Non-controllable antipollution check valves (protection units EB and ED) B.7 Inline anti vacuum valve (protection units DA) B.8 Pipe interrupter with atmospheric vent and moving elements (protection unit DB) B.9 Hose union backflow preventer (protection unit HA) B.10 Hose union anti-vacuum valve (protection unit type HB) B.11 Automatic diverter (protection unit type HC) B.12 Hose union anti vacuum valve combined with check valve (protection unit family H type D) B.13 Pressurised air inlet valve (protection unit family L type A) B.14 Pressurised air inlet valve combined with a check valve located downstream (protection unit family L type B) B.15 Hydraulic safety groups and expansion groups B.16 Pressure safety valves, expansion valves and combined temperature and pressure relief valves B.17 Inline hot water supply tempering valves B.18 Pressure reducing valve B.19 Pressure booster pump B.20 Water heaters B.21 Fire fighting installations B.22 Pipework B.23 Water meters
5 DS/EN 806-5:2013 Indholdsfortegnelse Forord Anvendelsesområde Normative referencer Termer og definitioner Generelt Dokumentation Drift Driftsafbrydelser og frakobling Genoptagelse af forsyning Skader og fejl Ændring i vandkvaliteten Utilstrækkelig vandforsyning Støjemission Ændringer, forlængelser og renovering Installationskomponenters tilgængelighed Vedligehold Anneks A (normativt) Hyppigheder af inspektion og vedligehold af komponenter til drikkevandsinstallationer Anneks B (normativt) Inspektions- og vedligeholdsprocedurer B.1 Luftgab (sikringsfamilie A) B.2 Rørafbrydere (sikringsfamilie D, sikringstype C) B.3 Tilbagestrømningssikring med kontrollerbare trykzoner (sikringsarmatur BA) B.4 Tilbagestrømningssikring med forskellige ikke-kontrollerbare trykzoner (sikringsarmatur CA) B.5 Kontrollerbare kontraventiler (sikringsarmatur EA og EC) B.6 Ikke-kontrollerbare kontraventiler (sikringsarmatur EB og ED) B.7 Lavtryksvakuumventil (sikringsarmatur DA) B.8 Rørafbryder med bevægeligt element for tilgang af luft (sikringsarmatur DB) B.9 Slangekobling med tilbagestrømningssikring (sikringsarmatur HA) B.10 Slangekobling med vakuumventil (sikringstype HB) B.11 Automatisk omstiller (sikringstype HC) B.12 Slangekobling med kombineret vakuumventil og kontraventil (sikringsfamilie H, sikringstype D) B.13 Højtryksvakuumventil (sikringsfamilie L, sikringstype A) B.14 Højtryksvakuumventil kombineret med en kontraventil monteret nedstrøms (sikringsfamilie L, sikringstype B) B.15 Hydrauliske sikkerhedsgrupper og ekspansionsgrupper B.16 Sikkerhedsventiler, ekspansionsventiler og kombinerede temperatur-tryk-ventiler B.17 Termostatiske blandeventiler til brugsvandsanlæg B.18 Trykreduktionsventiler B.19 Trykforøgerpumpe B.20 Vandvarmere B.21 Brandbekæmpelsesinstallationer B.22 Ledningsanlæg B.23 Vandmålere Side 2 (da)
6 EN 806-5:2012 (E) Annex C (normative) Inspection and maintenance procedures for water conditioning devices Bibliography
7 DS/EN 806-5:2013 Anneks C (normativt) Inspektions- og vedligeholdsprocedurer for vandbehandlingsanlæg Bibliografi (da)
8 EN 806-5:2012 (E) Foreword This document (EN 806-5:2012) has been prepared by Technical Committee CEN/TC "Water supply", the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2012, and conflicting national standards shall be withdrawn at the latest by August Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document is intended for the use of engineers, architects, surveyors, contractors, installers, water suppliers, consumers and regulatory inspectors. This standard has been written in the form of a practice specification. It is the fifth part of the European Standard "Specifications for installations inside buildings concerning water for human consumption" consisting of five parts as follows: Part 1: General; Part 2: Design; Part 3: Pipe sizing Simplified method; Part 4: Installation; Part 5: Operation and maintenance. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. 4
9 DS/EN 806-5:2013 Forord Dette dokument (EN 806-5:2012) er udarbejdet af teknisk komité CEN/TC 261, Water supply, hvis sekretariat varetages af AFNOR. Denne europæiske standard skal inden august 2012 have status som national standard enten ved udgivelse af en identisk tekst eller ved formel godkendelse, og modstridende nationale standarder skal være trukket tilbage senest august Der gøres opmærksom på, at dele af denne standard eventuelt kan være genstand for patentrettigheder. CEN [og/ eller CENELEC] kan ikke drages til ansvar for at identificere sådanne rettigheder. Dette dokument er beregnet for ingeniører, arkitekter, tilsynsførende, leverandører, installatører, forbrugere, vandværker og tilsynsfolk. Denne standard er skrevet som en vejledning til praksis. Det er femte del af den europæiske standard Specifikationer for drikkevandsinstallationer i bygninger, som består af fem dele som følger: Del 1: Generelt Del 2: Projektering Del 3: Rørdimensionering Simpel metode Del 4: Installation Del 5: Drift og vedligehold I henhold til CEN/CENELEC s interne regler er de nationale standardiseringsorganisationer i følgende lande forpligtet til at implementere denne europæiske standard: Belgien, Bulgarien, Cypern, Danmark, Estland, Finland, Frankrig, Grækenland, Irland, Island, Italien, Kroatien, Letland, Litauen, Luxembourg, Malta, Nederlandene, Norge, Polen, Portugal, Rumænien, Schweiz, Slovakiet, Slovenien, Spanien, Storbritannien, Sverige, Tjekkiet, Tyrkiet, Tyskland, Ungarn og Østrig. 4 (da)
10 EN 806-5:2012 (E) 1 Scope This European Standard specifies requirements and gives recommendations for the operation and maintenance of potable water installations within buildings and for pipework outside buildings but within the premises in accordance with EN Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references the latest edition of the referenced document (including any amendments) applies. EN 806-1:2000, Specifications for installations inside buildings conveying water for human consumption Part 1: General EN 806-2, Specifications for installations inside buildings conveying water for human consumption Part 2: Design EN 806-4:2010, Specifications for installations inside buildings conveying water for human consumption Part 4: Installation EN 1487, Building valves Hydraulic safety groups Tests and requirements EN 1488, Building valves Expansion groups Tests and requirements EN 1489, Building valves Pressure safety valves Tests and requirements EN 1490, Building valves Combined temperature and pressure relief valves Tests and requirements EN 1491, Building valves Expansion valves Tests and requirements EN 1567, Building valves Water pressure reducing valves and combination water pressure reducing valves Requirements and tests EN 1717:2000, Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow EN 12729, Devices to prevent pollution by backflow of potable water Controllable backflow preventer with reduced pressure zone Family B - Type A EN 12897, Water supply Specification for indirectly heated unvented (closed) storage water heaters EN 13076, Devices to prevent pollution by backflow of potable water Unrestricted air gap Family A - Type A EN 13077, Devices to prevent pollution by backflow of potable water Air gap with non-circular overflow (unrestricted) Family A - Type B EN 13078, Devices to prevent pollution by backflow of potable water Air gap with submerged feed incorporating air inlet plus overflow Family A, type C EN 13079, Devices to prevent pollution by backflow of potable water Air gap with injector Family A - Type D EN 13433, Devices to prevent pollution by backflow of potable water Mechanical disconnector, direct actuated Family G, type A 5
11 DS/EN 806-5: Anvendelsesområde Denne europæiske standard specificerer krav og anbefalinger til drift og vedligehold af drikkevandsinstallationer i bygninger og til rørledningsanlæg til drikkevand uden for bygninger, men inden for den tilhørende ejendom, i overensstemmelse med EN Normative referencer Dokumenterne, der henvises til nedenfor, er nødvendige for anvendelsen af dette dokument. For daterede referencer gælder kun den nævnte udgave. For udaterede referencer gælder den nyeste udgave af det pågældende dokument (med eventuelle tillæg). EN 806 1:2000, Specifications for installations inside buildings conveying water for human consumption Part 1: General EN 806 2, Specifications for installations inside buildings conveying water for human consumption Part 2: Design EN 806 4:2010, Specifications for installations inside buildings conveying water for human consumption Part 4: Installation EN 1487, Building valves Hydraulic safety groups Tests and requirements EN 1488, Building valves Expansion groups Tests and requirements EN 1489, Building valves Pressure safety valves Tests and requirements EN 1490, Building valves Combined temperature and pressure relief valves Tests and requirements EN 1491, Building valves Expansion valves Tests and requirements EN 1567, Building valves Water pressure reducing valves and combination water pressure reducing valves Requirements and tests EN 1717:2000, Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow EN 12729, Devices to prevent pollution by backflow of potable water Controllable backflow preventer with reduced pressure zone Family B - Type A EN 12897, Water supply Specification for indirectly heated unvented (closed) storage water heaters EN 13076, Devices to prevent pollution by backflow of potable water Unrestricted air gap Family A - Type A EN 13077, Devices to prevent pollution by backflow of potable water Air gap with non-circular overflow (unrestricted) Family A - Type B EN 13078, Devices to prevent pollution by backflow of potable water Air gap with submerged feed incorporating air inlet plus overflow Family A, type C EN 13079, Devices to prevent pollution by backflow of potable water Air gap with injector Family A - Type D EN 13433, Devices to prevent pollution by backflow of potable water Mechanical disconnector, direct actuated Family G, type A 5 (da)
12 EN 806-5:2012 (E) EN 13434, Devices to prevent pollution by backflow of potable water Mechanical disconnector, hydraulic actuated Family G, type B EN , Water conditioning equipment inside buildings Mechanical filters Part 1: Particle rating 80 m to 150 m Requirements for performances, safety and testing EN , Water conditioning equipment inside buildings Mechanical filters Part 2: Particle rating 1 m to less than 80 m Requirements for performance, safety and testing EN 13959, Anti-pollution check valves DN 6 to DN 250 inclusive family E, type A, B, C and D EN 14095, Water conditioning equipment inside buildings Electrolytic treatment systems with aluminium anodes Requirements for performance, safety and testing EN 14367, Non-controllable backflow preventer with different pressure zones Family C, type A EN 14451, Devices to prevent pollution by backflow of potable water In-line anti-vacuum valves DN 8 to DN 80 Family D, type A EN 14452, Devices to prevent pollution by backflow of potable water Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20 Family D, type B EN 14453, Devices to prevent pollution by backflow of potable water Pipe interrupter with permanent atmospheric vent DN 10 to DN 20 Family D, type C EN 14454, Devices to prevent pollution by backflow of potable water Hose union backflow preventer DN 15 to DN 32 Family H, type A EN 14455, Devices to prevent pollution by backflow of potable water Pressurised air inlet valves DN 15 to DN 50 Family L, type A and type B EN 14506, Devices to prevent pollution by backflow of potable water Automatic diverter Family H, type C EN 14622, Devices to prevent pollution by backflow of potable water Air gap with circular overflow (restricted) Family A, type F EN 14623, Devices to prevent pollution by backflow of potable water Air gaps with minimum circular overflow (verified by test or measurement) Family A, type G EN 14652, Water conditioning equipment inside buildings Membrane separation devices Requirements for performance, safety and testing EN 14743, Water conditioning equipment inside buildings Softeners Requirements for performance, safety and testing EN 14812, Water conditioning equipment inside buildings Chemical dosing systems Pre-set dosing systems Requirements for performance, safety and testing EN 14897, Water conditioning equipment inside buildings Devices using mercury low-pressure ultraviolet radiators Requirements for performances, safety and testing EN 14898, Water conditioning equipment inside buildings Active media filters Requirements for performances, safety and testing EN 15092, Building valves Inline hot water supply tempering valves Tests and requirements EN 15096, Devices to prevent pollution by backflow of potable water Hose union anti-vacuum valves DN 15 to DN 25 inclusive Family H, type B and type D General technical specification 6
13 DS/EN 806-5:2013 EN 13434, Devices to prevent pollution by backflow of potable water Mechanical disconnector, hydraulic actuated Family G, type B EN , Water conditioning equipment inside buildings Mechanical filters Part 1: Particle rating 80 µm to 150 µm Requirements for performances, safety and testing EN , Water conditioning equipment inside buildings Mechanical filters Part 2: Particle rating 1 µm to less than 80 µm Requirements for performance, safety and testing EN 13959, Anti-pollution check valves DN 6 to DN 250 inclusive family E, type A, B, C and D EN 14095, Water conditioning equipment inside buildings Electrolytic treatment systems with aluminium anodes Requirements for performance, safety and testing EN 14367, Non-controllable backflow preventer with different pressure zones Family C, type A EN 14451, Devices to prevent pollution by backflow of potable water In-line anti-vacuum valves DN 8 to DN 80 Family D, type A EN 14452, Devices to prevent pollution by backflow of potable water Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20 Family D, type B EN 14453, Devices to prevent pollution by backflow of potable water Pipe interrupter with permanent atmospheric vent DN 10 to DN 20 Family D, type C EN 14454, Devices to prevent pollution by backflow of potable water Hose union backflow preventer DN 15 to DN 32 Family H, type A EN 14455, Devices to prevent pollution by backflow of potable water Pressurised air inlet valves DN 15 to DN 50 Family L, type A and type B EN 14506, Devices to prevent pollution by backflow of potable water Automatic diverter Family H, type C EN 14622, Devices to prevent pollution by backflow of potable water Air gap with circular overflow (restricted) Family A, type F EN 14623, Devices to prevent pollution by backflow of potable water Air gaps with minimum circular overflow (verified by test or measurement) Family A, type G EN 14652, Water conditioning equipment inside buildings Membrane separation devices Requirements for performance, safety and testing EN 14743, Water conditioning equipment inside buildings Softeners Requirements for performance, safety and testing EN 14812, Water conditioning equipment inside buildings Chemical dosing systems Pre-set dosing systems Requirements for performance, safety and testing EN 14897, Water conditioning equipment inside buildings Devices using mercury low-pressure ultraviolet radiators Requirements for performances, safety and testing EN 14898, Water conditioning equipment inside buildings Active media filters Requirements for performances, safety and testing EN 15092, Building valves Inline hot water supply tempering valves Tests and requirements EN 15096, Devices to prevent pollution by backflow of potable water Hose union anti-vacuum valves DN 15 to DN 25 inclusive Family H, type B and type D General technical specification 6 (da)
14 EN 806-5:2012 (E) EN 15161, Water conditioning equipment inside buildings Installation, operation, maintenance and repair EN 15219, Water conditioning equipment inside buildings Nitrate removal devices Requirements for performance, safety and testing EN 15848, Water conditioning equipment inside buildings Adjustable chemical dosing systems Requirements for performance, safety and testing EN ISO , Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 1: Method of measurement (ISO :1999) EN ISO , Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 2: Mounting and operating conditions for draw-off taps and mixing valves (ISO :1995) EN ISO , Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 3: Mounting and operating conditions for in-line valves and appliances (ISO :1997) EN ISO , Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 4: Mounting and operating conditions for special appliances (ISO :1997) 3 Terms and definitions For the purposes of this document, the terms, definitions and graphical symbols given in EN 806-1:2000 and EN 1717:2000 apply. 4 General Installations shall be operated and maintained in such a manner as to avoid adversely affecting the quality of potable water, the supply to consumers and the equipment of the water supplier. Installations shall be checked at regular intervals for safety and performance. Appropriate procedures shall be adopted to maintain the performance of the system at the level specified in EN 806-2, EN 1717 and the individual product standards referenced in Annex A. The system shall be operated in accordance with the original design conditions, e.g. temperature, pressure. Responsibility for operation, inspection and maintenance is subject to local and national requirements (e.g. qualified personnel). 5 Documentation In order to enable the correct operation and maintenance, all information relevant to the installation shall be readily available. Manufacturer's documentation (e.g. Technical Product Information (TPI)) related to the operation and maintenance of appliances shall be available, retained and followed. The commissioning report shall be part of the documentation. The maintenance shall be recorded and stored in such a way that the data is auditable. 7
15 DS/EN 806-5:2013 EN 15161, Water conditioning equipment inside buildings Installation, operation, maintenance and repair EN 15219, Water conditioning equipment inside buildings Nitrate removal devices Requirements for performance, safety and testing EN 15848, Water conditioning equipment inside buildings Adjustable chemical dosing systems Requirements for performance, safety and testing EN ISO , Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 1: Method of measurement (ISO :1999) EN ISO , Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 2: Mounting and operating conditions for draw-off taps and mixing valves (ISO :1995) EN ISO , Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 3: Mounting and operating conditions for in-line valves and appliances (ISO :1997) EN ISO , Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 4: Mounting and operating conditions for special appliances (ISO :1997) 3 Termer og definitioner I dette dokument gælder termerne og definitionerne samt de grafiske symboler i EN 806-1:2000 og EN 1717: Generelt Vandinstallationer skal holdes i drift og vedligeholdes således, at vandkvaliteten, forsyningen til forbrugere og vandforsyningsudstyret ikke påvirkes. Vandinstallationer skal kontrolleres i forhold til sikkerhed og ydeevne i regelmæssige intervaller. Egnede procedurer skal angives for at opretholde systemets ydeevne på det specificerede niveau i EN 806-2, EN 1717 og i de individuelle produktstandarder refereret i anneks A. Systemet skal holdes i drift i overensstemmelse med de oprindelige projekteringsforhold, fx temperatur, tryk. Ansvaret for drift, inspektion og vedligehold er underlagt lokale og nationale krav (fx kvalificeret personel). 5 Dokumentation Alle oplysninger, der er relevante for installationen, skal være umiddelbart tilgængelige for at muliggøre korrekt drift og vedligehold. Producentens dokumentation (fx teknisk produktspecifikation vedrørende drift og vedligehold af apparater) skal være tilgængelige og skal følges. Idriftsættelsesrapporten skal udgøre del af dokumentationen. Data for vedligehold skal registreres og opbevares, så de er tilgængelige i forbindelse med audit. 7 (da)
Dansk standard DS/EN ISO udgave Campingtelte. Camping tents
Dansk standard DS/EN ISO 5912 2. udgave 2011-11-22 Campingtelte Camping tents DS/EN ISO 5912 København DS projekt: M245636 ICS: 97.200.30 Første del af denne publikations betegnelse er: DS/EN ISO, hvilket
Læs mereTekniske specifikationer for centrifugalpumper Klasse III
Dansk standard Tillæg DS/EN ISO 9908/A1 1. udgave 2011-06-08 Tekniske specifikationer for centrifugalpumper Klasse III Technical specifications for centrifugal pumps Class III Amendment 1 DS/EN ISO 9908/A1
Læs mereKrydderier og smagsstoffer Botanisk nomenklatur
Dansk standard DS/EN ISO 676 1. udgave 2009-07-23 Krydderier og smagsstoffer Botanisk nomenklatur Spices and condiments Botanical nomenclature DS/EN ISO 676 København DS projekt: M230052 ICS: 01.040.67;
Læs mereKosmetik Metoder til prøvning af solbeskyttelse In vivo-bestemmelse af UVA-beskyttelse
Dansk standard DS/EN ISO 24442 1. udgave 2012-02-01 Kosmetik Metoder til prøvning af solbeskyttelse In vivo-bestemmelse af UVA-beskyttelse Cosmetics Sun protection test methods In vivo determination of
Læs merePapir og karton Bestemmelse af tykkelse, densitet og massevolumen
Dansk standard DS/EN ISO 534 1. udgave 2012-01-04 Papir og karton Bestemmelse af tykkelse, densitet og massevolumen Paper and board Determination of thickness, density and specific volume DS/EN ISO 534
Læs merePulvermaling Del 7: Bestemmelse af massetab efter ophedning i ovn
Dansk standard DS/EN ISO 8130-7 1. udgave 2011-01-21 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 8130-7:2011 Pulvermaling Del 7: Bestemmelse af massetab efter ophedning
Læs mereEurocode 7: Geoteknik Del 1: Generelle regler
Dansk standard Tillæg DS/EN 1997-1/A1 1. udgave 2014-02-03 Eurocode 7: Geoteknik Del 1: Generelle regler Eurocode 7: Geotechnical design Part 1: General rules DS/EN 1997-1/A1 København DS projekt: M267839
Læs mereMaintenance Documentation for maintenance
Dansk standard DS/EN 13460 3. udgave 2009-12-15 Vedligehold Dokumentation for vedligehold Maintenance Documentation for maintenance DS/EN 13460 København DS projekt: M245239 ICS: 01.110; 21.020 Første
Læs mereWc-kummer og wc-møbler Tilslutningsdimensioner
Dansk standard DS/EN 33 3. udgave 2011-10-03 Wc-kummer og wc-møbler Tilslutningsdimensioner WC pans and WC suites Connecting dimensions DS/EN 33 København DS projekt: M235262 ICS: 91.140.70 Første del
Læs mereMajs Bestemmelse af vandindhold (i forarbejdet korn og i hele korn)
Dansk standard DS/EN ISO 6540 1. udgave 2010-06-23 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 6540:2010 Majs Bestemmelse af vandindhold (i forarbejdet korn og i hele
Læs merePlast Bestemmelse af termoplasts massesmelteindeks (MFR) og volumensmelteindeks (MVR) Del 1: Standardmetode
Dansk standard DS/EN ISO 1133-1 1. udgave 2012-01-25 Plast Bestemmelse af termoplasts massesmelteindeks (MFR) og volumensmelteindeks (MVR) Del 1: Standardmetode Plastics Determination of the melt mass-flow
Læs mereMiljøledelsessystemer Kravbeskrivelse med råd om anvendelse
Dansk standard DS/EN ISO 14001 2. udgave 2004-11-30 Miljøledelsessystemer Kravbeskrivelse med råd om anvendelse Environmental management systems Requirements with guidance for use DS/EN ISO 14001 København
Læs mereMalinger og lakker Belysning og procedure for visuel vurdering af belægninger
Dansk standard DS/EN ISO 13076 1. udgave 2012-08-10 Malinger og lakker Belysning og procedure for visuel vurdering af belægninger Paints and varnishes Lighting and procedure for visual assessments of coatings
Læs mereTeknisk tegning Flowdiagrammer til procesanlæg Generelle regler
Dansk Standard DS/EN ISO 10628 1. udgave Godkendelsesblad Godkendt:2001-04-06 Teknisk tegning Flowdiagrammer til procesanlæg Generelle regler Flow diagrams for process plants General rules DANSK STANDARD
Læs mereCentrale strømforsyningssystemer
Dansk Standard DS/EN 50171 1. udgave 2001-08-29 Centrale strømforsyningssystemer Central power supply systems DS/EN 50171 København DS projekt: 30769 ICS: 29.200 Deskriptorer: belysning til nødudgang,elektriske
Læs mereMaskinsikkerhed Elektrisk udstyr på maskiner Del 1: Generelle krav
Dansk standard Tillæg DS/EN 60204-1/A1 1. udgave 2009-03-13 Maskinsikkerhed Elektrisk udstyr på maskiner Del 1: Generelle krav Safety of machinery Electrical equipment of machines Part 1: General requirements
Læs mereDansk standard DS/EN Loft ladders Requirements, marking and testing. 1. udgave
Dansk standard DS/EN 14975 1. udgave 2007-02-26 Loftstiger Krav, mærkning og prøvning Loft ladders Requirements, marking and testing DS/EN 14975 København DS projekt: 55746 ICS: 97.145 Første del af denne
Læs merePalmeolie Bestemmelse af indeks for forringelse af blegningsevne (DOBI) samt bestemmelse af karotinindhold
Dansk standard DS/EN ISO 17932 2. udgave 2011-11-07 Palmeolie Bestemmelse af indeks for forringelse af blegningsevne (DOBI) samt bestemmelse af karotinindhold Palm oil Determination of the deterioration
Læs mereGeometriske produktspecifikationer (GPS) Længdemåleudstyr højdemålere Design og metrologiske karakteristika
Dansk standard DS/EN ISO 13225 1. udgave 2012-05-23 Geometriske produktspecifikationer (GPS) Længdemåleudstyr højdemålere Design og metrologiske karakteristika Geometrical product specifications (GPS)
Læs mereGasfyrede tørretumblere af type B med en nominel belastning, der ikke overstiger 20 kw Del 2: Rationel energiudnyttelse
Dansk Standard DS/EN 12752-2 2. udgave 2001-11-09 Gasfyrede tørretumblere af type B med en nominel belastning, der ikke overstiger 20 kw Del 2: Rationel energiudnyttelse Gas-fired tumble dryers of type
Læs mereBordtennis Del 2: Netstolper Krav og prøvningsmetoder
Dansk standard DS/EN 14468-2:2015 2. udgave 2015-04-29 Bordtennis Del 2: Netstolper Krav og prøvningsmetoder Table tennis Part 2: Posts for net assemblies Requirements and test methods DS/EN 14468-2:2015
Læs merePackaging Flexible plastic/metal laminate tubes Dimensions and tolerances of nozzle S 13
Dansk standard DS/EN 14979 1. udgave 2006-03-31 Emballage Fleksible laminattuber af plast/metal Dimensioner og tolerancer for dyse S 13 Packaging Flexible plastic/metal laminate tubes Dimensions and tolerances
Læs mereSvejsekoordination Opgaver og ansvarsforhold
Dansk standard DS/EN ISO 14731 1. udgave 2006-11-06 Svejsekoordination Opgaver og ansvarsforhold Welding coordination Tasks and responsibilities DS/EN ISO 14731:2006 København DS projekt: 55660 ICS: 25.160.01
Læs mereAkustik Støjreduktion Kabiner Laboratorie- og in situ-målinger
Dansk standard DS/EN ISO 11957 2. udgave 2009-09-22 Akustik Støjreduktion Kabiner Laboratorie- og in situ-målinger Acoustics Determination of sound insulation performance of cabins Laboratory and in situ
Læs mereHalvlederelementer Mekaniske og klimatiske prøvningsmetoder Del 33: Accelereret fugtbestandighed Objektiv autoklav
Dansk standard DS/EN 60749-33 1. udgave 2004-04-29 Halvlederelementer Mekaniske og klimatiske prøvningsmetoder Del 33: Accelereret fugtbestandighed Objektiv autoklav Semiconductor devices Mechanical and
Læs mereSlanger og rør af gummi og plast Måling af fleksibilitet og stivhed Del 2: Bøjeprøvning ved lavere temperaturer end rumtemperatur
Dansk standard DS/EN ISO 10619-2 1. udgave 2012-01-24 Slanger og rør af gummi og plast Måling af fleksibilitet og stivhed Del 2: Bøjeprøvning ved lavere temperaturer end rumtemperatur Rubber and plastics
Læs mereSpecifikation og kvalificering af svejseprocedurer for metalliske materialer Kvalificering ved godkendelse af en standardsvejseprocedure
Dansk standard DS/EN ISO 15612 2. udgave 2005-12-22 Specifikation og kvalificering af svejseprocedurer for metalliske materialer Kvalificering ved godkendelse af en standardsvejseprocedure Specification
Læs mereRotordynamiske pumper Godkendelsesprøvning af hydraulisk ydeevne Klasse 1, 2 og 3
Dansk standard DS/EN ISO 9906 2. udgave 2012-06-08 Rotordynamiske pumper Godkendelsesprøvning af hydraulisk ydeevne Klasse 1, 2 og 3 Rotodynamic pumps Hydraulic performance acceptance tests Grades 1, 2
Læs mereIntegration af virksomhedens styringssystem Del 1: Modeller og terminologi
Dansk standard DS/EN 62264-1 1. udgave 2008-02-01 Integration af virksomhedens styringssystem Del 1: Modeller og terminologi Enterprise-control system integration DS/EN 62264-1 København DS projekt: M222179
Læs mereDansk standard DS/EN Risk management Risk assessment techniques. 1. udgave
Dansk standard DS/EN 31010 1. udgave 2010-05-20 Risikoledelse Teknikker til risikovurdering Risk management Risk assessment techniques DS/EN 31010 København DS projekt: M231261 ICS: 03.100.01 Første del
Læs mereCold rolled narrow steel strip Tolerances on dimensions and shape
Dansk standard DS/EN 10140 3. udgave 2009-06-02 Koldvalset båndstål Tolerancer for dimensioner og form Cold rolled narrow steel strip Tolerances on dimensions and shape DS/EN 10140 København DS projekt:
Læs mereGødning Ekstraktion af vandopløseligt calcium, magnesium, natrium og svovl i form af sulfat
Dansk standard DS/EN 15961 1. udgave 2012-01-06 Gødning Ekstraktion af vandopløseligt calcium, magnesium, natrium og svovl i form af sulfat Fertilizers Extraction of water-soluble calcium, magnesium, sodium
Læs mereDansk standard DS/EN 13429. Packaging Reuse. 3. udgave 2006-10-12
Dansk standard DS/EN 13429 3. udgave 2006-10-12 Emballage Genbrug Packaging Reuse DS/EN 13429 København DS projekt: M215981 ICS: 13.030.50; 55.020 Første del af denne publikations betegnelse er: DS/EN,
Læs mereLampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler
Dansk standard Tillæg DS/EN 60061-1/A41 (elektronisk) 1. udgave 2010-06-24 Lampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler Lamp caps and holders together
Læs mereFritidsbåde Komfurer til flydende brændsel
Dansk standard DS/EN ISO 14895 1. udgave 2003-04-11 Fritidsbåde Komfurer til flydende brændsel Small craft Liquid-fuelled galley stoves DS/EN ISO 14895 København DS projekt: 47074 ICS: 47.080 Deskriptorer:
Læs mereMøbler til udendørs brug Siddemøbler og borde til camping, privat og offentlig brug Del 1: Generelle sikkerhedskrav
Dansk standard DS/EN 581-1 2. udgave 2006-04-19 Møbler til udendørs brug Siddemøbler og borde til camping, privat og offentlig brug Del 1: Generelle sikkerhedskrav Outdoor furniture Seating and tables
Læs mereStyring af rumfartsprojekter. Generelle krav. Del 1: Politik og principper
Dansk Standard DS/EN 13290-1 1. udgave Godkendt:2000-04-13 Styring af rumfartsprojekter. Generelle krav. Del 1: Politik og principper Space project management - General requirements - Part 1: Policy and
Læs mereVinduer og døre Vandtæthed Klassifikation
Dansk Standard DS/EN 12208 1. udgave Godkendt:2000-12-29 Vinduer og døre Vandtæthed Klassifikation Windows and doors Watertightness Classification DANSK STANDARD - Eftertryk uden tilladelse forbudt Kollegievej
Læs mereKontormøbler Kontorstole Del 1: Mål Bestemmelse af dimensioner
Dansk Standard DS/EN 1335-1 2. udgave Godkendt: 2001-02-21 Kontormøbler Kontorstole Del 1: Mål Bestemmelse af dimensioner Office furniture Office work chair Part 1: Dimensions Determination of dimensions
Læs mereLampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler
Dansk standard Tillæg DS/EN 60061-1/A47 (elektronisk) 1. udgave 2012-04-23 Lampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler Lamp caps and holders together
Læs mereDansk standard DS/EN Weibull analysis. 1. udgave
Dansk standard DS/EN 61649 1. udgave 2008-12-10 Weilbull-analyse Weibull analysis DS/EN 61649 København DS projekt: M219606 ICS: 03.120.30 Første del af denne publikations betegnelse er: DS/EN, hvilket
Læs mereStørrelser og enheder Del 13: Informationsvidenskab og -teknologi
Dansk standard DS/EN 80000-13 1. udgave 2008-08-22 Størrelser og enheder Del 13: Informationsvidenskab og -teknologi Quantities and units Part 13: Information science and technology DS/EN 80000-13 København
Læs mereFysiske størrelser og enheder Del 14: Telebiometri relateret til human fysiologi
Dansk standard DS/EN 80000-14 1. udgave 2009-05-27 Fysiske størrelser og enheder Del 14: Telebiometri relateret til human fysiologi Quantities and units Part 14: Telebiometrics related to human physiology
Læs mereMultimedia quality Method of assessment of synchronization of audio and video
Dansk standard DS/EN 62503 1. udgave 2008-10-31 Multimediekvalitet Metode til fastsættelse af synkronisering mellem lyd og billede Multimedia quality Method of assessment of synchronization of audio and
Læs mereElektrostatik Del 4-1: Standardprøvningsmetoder. anvendelser Gulvbelægningers og monterede gulves elektrostatiske egenskaber
Dansk standard Tillæg DS/EN 61340-4-1:2004/A1:2015 1. udgave 2015-06-23 Elektrostatik Del 4-1: Standardprøvningsmetoder for specifikke anvendelser Gulvbelægningers og monterede gulves elektrostatiske egenskaber
Læs mereVentilation i bygninger Symboler, terminologi og grafiske symboler
Dansk standard DS/EN 12792 1. udgave 2003-12-17 Ventilation i bygninger Symboler, terminologi og grafiske symboler Ventilation for buildings Symbols, terminology and graphical symbols DS/EN 12792 København
Læs mereFaste modstande til brug i elektronisk udstyr Del 1: Generisk specifikation
Dansk standard Tillæg DS/EN 60115-1:2011/ A11:2015 1. udgave 2015-05-18 Faste modstande til brug i elektronisk udstyr Del 1: Generisk specifikation Fixed resistors for use in electronic equipment Part
Læs mereLegepladsredskaber og -underlag Del 11: Tredimensionelle klatrenet Supplerende specifikke sikkerhedskrav og prøvningsmetoder
Dansk standard DS/EN 1176-11 2. udgave 2009-04-22 Legepladsredskaber og -underlag Del 11: Tredimensionelle klatrenet Supplerende specifikke sikkerhedskrav og prøvningsmetoder Playground equipment and surfacing
Læs mereIkke-destruktiv prøvning Lækprøvning Kriterier for valg af metode og teknik
Dansk Standard DS/EN 1779 2. udgave 2001-10-26 Ikke-destruktiv prøvning Lækprøvning Kriterier for valg af metode og teknik Non-destructive testing Leak testing Criteria for method and technique selection
Læs merePrøvningsmetoder til hjælpekomponenter til murværk Del 4: Bestemmelse af lastkapacitet og lastnedbøjning i bjælkesko
Dansk standard DS/EN 846-4 + A1 2. udgave 2002-12-04 Prøvningsmetoder til hjælpekomponenter til murværk Del 4: Bestemmelse af lastkapacitet og lastnedbøjning i bjælkesko Methods of test for ancillary components
Læs mereTemperature Electromotive force (EMF) tables for pure-element thermocouple combinations
Dansk standard DS/EN 62460 1. udgave 2008-10-14 Temperatur Elektromotorisk kraft (EMF) Tabeller for kombinationer af rene termoelementer Temperature Electromotive force (EMF) tables for pure-element thermocouple
Læs mereKvalitetsledelsessystemer Krav
Dansk standard DS/EN ISO 9001 4. udgave 2008-12-09 Kvalitetsledelsessystemer Krav Quality management systems Requirements DS/EN ISO 9001 København DS projekt: M220000 ICS: 03.120.10 Første del af denne
Læs mereSteel castings Austenitic manganese steel castings
Dansk standard DS/EN 10349 1. udgave 2009-11-05 Stålstøbegods Austenitisk manganstålstøbegods Steel castings Austenitic manganese steel castings DS/EN 10349 København DS projekt: M220956 ICS: 77.140.80
Læs mereBatchstyring Del 1: Modeller og terminologi
Dansk Standard DS/EN 61512-1 1. udgave 2001-08-29 Batchstyring Del 1: Modeller og terminologi Batch control Part 1: Models and terminology DS/EN 61512-1 København DS projekt: 26009 ICS: 25.040.40 Deskriptorer:
Læs mereSolcelleanlæg Termer, definitioner og symboler
DS-information DS/CLC/TS 61836 1. udgave 2009-06-26 Solcelleanlæg Termer, definitioner og symboler Solar photovoltaic energy systems Terms, definitions and symbols DS/CLC/TS 61836 København DS projekt:
Læs mereMaskinsikkerhed Permanente adgangsveje til maskinanlæg Del 4: Faste stiger
Dansk standard Tillæg DS/EN ISO 14122-4/A1 1. udgave 2010-10-19 Maskinsikkerhed Permanente adgangsveje til maskinanlæg Del 4: Faste stiger Safety of machinery Permanent means of access to machinery Part
Læs mereVeksellad Ikke-stabelbare veksellad klasse C Dimensioner og generelle krav
Dansk standard DS/EN 284 2. udgave 2007-04-27 Veksellad Ikke-stabelbare veksellad klasse C Dimensioner og generelle krav Swap bodies Non-stackable swap bodies of class C Dimensions and general requirements
Læs mereMobil og bærbar DVB-T/H-radiotilslutning Del 2: Grænsefladeoverensstemmelsesprøvning
Dansk standard DS/EN 62002-2 1. udgave 2006-12-12 Mobil og bærbar DVB-T/H-radiotilslutning Del 2: Grænsefladeoverensstemmelsesprøvning Mobile and portable DVB-T/H radio access Part 2: Interface conformance
Læs mereKøkkengrej Grafiske symboler (piktogrammer)
Dansk standard DS/EN 14916 1. udgave 2005-11-14 Køkkengrej Grafiske symboler (piktogrammer) Domestic cookware Graphical symbols (pictograms) DS/EN 14916 København DS projekt: 55114 ICS: 01.080.20; 97.040.60
Læs mereElastiske gulvbelægninger Halvfleksible pvc-fliser Specifikation
Dansk standard DS/EN 654 3. udgave 2011-06-14 Elastiske gulvbelægninger Halvfleksible pvc-fliser Specifikation Resilient floor coverings Semi-flexible polyvinyl chloride tiles Specification DS/EN 654 København
Læs mereTandpleje Manuelle tandbørster Generelle krav og prøvningsmetoder
Dansk standard DS/EN ISO 20126 2. udgave 2012-04-18 Tandpleje Manuelle tandbørster Generelle krav og prøvningsmetoder Dentistry Manual toothbrushes General requirements and test methods DS/EN ISO 20126
Læs mereFødevarer Bestemmelse af C-vitamin ved hjælp af HPLC
Dansk standard DS/EN 14130 1. udgave 2003-07-15 Fødevarer Bestemmelse af C-vitamin ved hjælp af HPLC Foodstuffs Determination of vitamin C by HPLC DS/EN 14130 København DS projekt: 46748 ICS: 67.050 Deskriptorer:
Læs mereElproducerende vindmøller Del 25-3: Kommunikationssystemer til overvågning og styring af vindmølleparker Modeller for informationsudveksling
Dansk standard DS/EN 61400-25-3 1. udgave 2007-04-27 Elproducerende vindmøller Del 25-3: Kommunikationssystemer til overvågning og styring af vindmølleparker Modeller for informationsudveksling Wind turbines
Læs mereFugtindhold af et stykke savet træ Del 2: Vurdering ved elektrisk modstandsmetode
Dansk Standard DS/EN 13183-2 1. udgave 2002-04-30 Fugtindhold af et stykke savet træ Del 2: Vurdering ved elektrisk modstandsmetode Moisture content of a piece of sawn timber Part 2: Estimation by electrical
Læs mereGrænseflade for digital lyd Del 1: Generelt
Dansk standard DS/EN 60958-1 3. udgave 2008-10-31 Grænseflade for digital lyd Del 1: Generelt Digital audio interface Part 1: General DS/EN 60958-1 København DS projekt: M222433 ICS: 33.160.30 Første del
Læs mereHeating boilers Electrical power consumption for heat generators System boundaries Measurements
Dansk standard DS/EN 15456 1. udgave 2008-05-13 Varmekedler Varmegeneratorers elforbrug Systemafgrænsning Målinger Heating boilers Electrical power consumption for heat generators System boundaries Measurements
Læs mereSuperledning Del 10: Måling af kritisk temperatur Kritisk temperatur for sammensatte superledere målt ved en modstandsmetode
Dansk standard DS/EN 61788-10 2. udgave 2006-12-11 Superledning Del 10: Måling af kritisk temperatur Kritisk temperatur for sammensatte superledere målt ved en modstandsmetode Superconductivity Part 10:
Læs mereAkustik Deklarering og verificering af støj fra maskiner og udstyr
Dansk standard DS/EN ISO 4871 2. udgave 2009-09-09 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 4871:2009 Akustik Deklarering og verificering af støj fra maskiner og udstyr
Læs mereAudioudstyr og audiovisuelt udstyr Digitale audiodele Grundlæggende metoder til måling af audiokarakteristika Del 4: Personlig computer
Dansk standard DS/EN 61606-4 1. udgave 2007-02-08 Audioudstyr og audiovisuelt udstyr Digitale audiodele Grundlæggende metoder til måling af audiokarakteristika Del 4: Personlig computer Audio and audiovisual
Læs merePackaging Requirements for the use of European Standards in the field of packaging and packaging waste
Dansk standard DS/EN 13427 3. udgave 2006-10-12 Emballage Krav til anvendelsen af europæiske standarder for emballage og emballageaffald Packaging Requirements for the use of European Standards in the
Læs mereKapslingsklasser (IP-kode)
Dansk Standard DS/EN 60529+A1 1. udgave 2002-04-05 Kapslingsklasser (IP-kode) Degrees of protection provided by enclosures (IP Code) DS/EN 60529+A1 København DS projekt: 47050 ICS: 29.020 Deskriptorer:
Læs mereUdstyr til vintertjeneste Snerydningsmaskiner med roterende værktøj Specifikation og rydningskapacitet
Dansk standard DS/EN 15906 1. udgave 2012-01-10 Udstyr til vintertjeneste Snerydningsmaskiner med roterende værktøj Specifikation og rydningskapacitet Winter maintenance equipment Snow removal machines
Læs mereControl technology Rules for the designation of measuring instruments
Dansk standard DS/EN 62419 1. udgave 2009-03-10 Styringsteknologi Regler for benævnelse af måleinstrumenter Control technology Rules for the designation of measuring instruments DS/EN 62419 København DS
Læs mereThermal spraying Acceptance inspection of thermal spraying equipment Part 2: Flame spraying including HVOF
Dansk standard DS/EN 1395-2 1. udgave 2007-02-27 Termisk sprøjtning Godkendelsesinspektion af termisk sprøjteudstyr Del 2: Flammesprøjtning inklusive HVOF Thermal spraying Acceptance inspection of thermal
Læs mereUdstyr til tilslutning af belysningsarmaturer til husholdningsbrug o.l. Del 2: Normblade for DCL
Dansk standard DS/EN 61995-2 1. udgave 2009-06-10 Udstyr til tilslutning af belysningsarmaturer til husholdningsbrug o.l. Del 2: Normblade for DCL Devices for the connection of luminaires for household
Læs mereDansk standard DS/EN
Dansk standard DS/EN 806-3 - 1. udgave 2006-05-24 Specifikationer for drikkevandsinstallationer i bygninger Del 3: Rørdimensionering Simpel metode Specifications for installations inside buildings conveying
Læs mereFacility Management Del 2: Vejledning i udarbejdelse af Facility Management-aftaler
Dansk standard DS/EN 15221-2 2. udgave 2008-06-30 Facility Management Del 2: Vejledning i udarbejdelse af Facility Management-aftaler Facility Management Part 2: Guidance on how to prepare Facility Management
Læs mereTilsatsmaterialer til svejsning Pulverfyldte elektroder til metallysbuesvejsning
Dansk standard DS/EN ISO 12153 1. udgave 2012-06-08 Tilsatsmaterialer til svejsning Pulverfyldte elektroder til metallysbuesvejsning med eller uden beskyttelsesgas af nikkel og nikkellegeringer Klassifikation
Læs mereCOPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 8501-4:2007#
Dansk standard DS/EN ISO 8501-4 1. udgave 2007-01-29 Forbehandling af ståloverflader før påføring af maling og lignende produkter Visuel vurdering af overfladens renhed Del 4: Karakterisering af overfladens
Læs mereLedelse af pålidelighedsaktiviteter Del 3-11: Anvendelsesvejledning Pålidelighedscentreret vedligehold (RCM)
Dansk standard DS/EN 60300-3-11 1. udgave 2009-12-10 Ledelse af pålidelighedsaktiviteter Del 3-11: Anvendelsesvejledning Pålidelighedscentreret vedligehold (RCM) Dependability management Part 3-11: Application
Læs mereBitumen and bituminous binders Determination of the tensile properties of modified bitumen by the force ductility method
Dansk standard DS/EN 13589 2. udgave 2008-05-23 Bitumen og bituminøse bindemidler Bestemmelse af modificeret bitumens trækstyrke ved hjælp af "force ductility" Bitumen and bituminous binders Determination
Læs mereMiljømærkning Egendeklaration af miljøpåstande (Type II miljømærkning)
Dansk standard Tillæg DS/EN ISO 14021/A1 1. udgave 2012-02-08 Miljømærkning Egendeklaration af miljøpåstande (Type II miljømærkning) Environmental labels and declarations Self-declared environmental claims
Læs mereMøbler Barnesenge og foldbare barnesenge til privat brug Del 1: Sikkerhedskrav
Dansk standard DS/EN 716-1 3. udgave 2008-10-09 Møbler Barnesenge og foldbare barnesenge til privat brug Del 1: Sikkerhedskrav Furniture Children's cots and folding cots for domestic use Part 1: Safety
Læs mereIkke-destruktiv prøvning Penetrantog magnetpulverprøvning ved brug af blåt lys
DS-information DS/CEN/TR 16638 1. udgave 2014-02-26 Ikke-destruktiv prøvning Penetrantog magnetpulverprøvning ved brug af blåt lys Non-destructive testing Penetrant and magnetic particle testing using
Læs mereMetoder til prøvning af byggesten til murværk Del 21: Bestemmelse af teglog kalksandstens vandabsorption ved hjælp af absorption med koldt vand
Dansk standard DS/EN 772-21 1. udgave 2011-06-27 Metoder til prøvning af byggesten til murværk Del 21: Bestemmelse af teglog kalksandstens vandabsorption ved hjælp af absorption med koldt vand Methods
Læs mereLiming materials Determination of the breakdown of granulated calcium and calcium/magnesium carbonates under the influence of water
Dansk standard DS/EN 15704 1. udgave 2009-01-23 Jordbrugskalk Bestemmelse af nedbrydning af granuleret calcium- og calcium/magnesiumcarbonater påvirket af vand Liming materials Determination of the breakdown
Læs mereTilbagestrømningssikringer til sikring mod forurening af drikkevand Frit luftgab Familie A Type A
Dansk standard DS/EN 13076 1. udgave 2003-06-20 Tilbagestrømningssikringer til sikring mod forurening af drikkevand Frit luftgab Familie A Type A Devices to prevent pollution by backflow of potable water
Læs mereDansk standard DS/EN 13590
Dansk standard DS/EN 13590 1. udgave 2003-06-30 Emballage Bæreposer af fleksibelt materiale til transport af dagligvarer Generelle egenskaber og prøvningsmetoder til bestemmelse af volumen og bæreevne
Læs mereEmballage Glasemballage Dybe BVS-lukninger til ikke-mousserende vine
Dansk standard DS/EN 16293 1. udgave 2013-04-03 Emballage Glasemballage Dybe BVS-lukninger til ikke-mousserende vine Packaging Glass Packaging Deep BVS finishes for still wines DS/EN 16293 København DS
Læs mereLedelse af en virksomhed frem mod vedvarende succes - med afsæt i kvalitetsledelse
Dansk standard DS/EN ISO 9004 2. udgave 2009-11-12 Ledelse af en virksomhed frem mod vedvarende succes - med afsæt i kvalitetsledelse Managing for the sustained success of an organization A quality management
Læs mereGlasfiberarmeret plast Bestemmelse af hårdhed ved hjælp af Barcol-hårdhedsmåler
Dansk standard DS/EN 59:2016 2. udgave 2016-02-26 Glasfiberarmeret plast Bestemmelse af hårdhed ved hjælp af Barcol-hårdhedsmåler Glass reinforced plastics Determination of indentation hardness by means
Læs mereEurocode 1: Last på bærende konstruktioner Del 1-3: Generelle laster Snelast
Dansk standard DS/EN 1991-1-3 2. udgave 2007-06-22 Eurocode 1: Last på bærende konstruktioner Del 1-3: Generelle laster Snelast Eurocode 1 Actions on structures Part 1-3: General actions - Snow loads DS/EN
Læs mereKarakteristikker af DAB-modtagere
Dansk Standard DS/EN 50248 2. udgave 2001-12-11 Karakteristikker af DAB-modtagere Characteristics of DAB receivers DS/EN 50248 København DS projekt: 42051 ICS: 33.160.20 33.160.25 Deskriptorer: lydudsendelse,tv-udsendelse,satellit-udsendelse,digitale
Læs mereHjælpemidler til personer med funktionsevnenedsættelse Klassifikation og terminologi
Dansk standard DS/EN ISO 9999 6. udgave 2007-12-19 Hjælpemidler til personer med funktionsevnenedsættelse Klassifikation og terminologi Assistive products for persons with disability Classification and
Læs mereAlarmsystemer Tryghedsalarmsystemer Del 5: Sammenkoblingsstik og kommunikation
Dansk standard DS/EN 50134-5 1. udgave 2004-12-03 Alarmsystemer Tryghedsalarmsystemer Del 5: Sammenkoblingsstik og kommunikation Alarm systems Social alarm systems Part 5: Interconnections and communications
Læs mereEnergiledelsessystemets grænseflade til applikationsprogrammer (EMS-API) Del 453: CIM-baseret grafisk udveksling
Dansk standard DS/EN 61970-453 1. udgave 2008-09-26 Energiledelsessystemets grænseflade til applikationsprogrammer (EMS-API) Del 453: CIM-baseret grafisk udveksling Energy management system application
Læs mereGrænseflade for digital lyd Del 1: Generelt
Dansk standard Tillæg DS/EN 60958-1/A1 1. udgave 2014-09-02 Grænseflade for digital lyd Del 1: Generelt Digital audio interface Part 1: General DS/EN 60958-1/A1 København DS projekt: M277911 ICS: 33.160.30
Læs merePipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems Part 2: System S; dimensions
Dansk standard DS/EN 1124-2 1. udgave 2008-03-04 Rør og fittings af længdesvejste rustfrie stålrør med spidsende og muffe til afløbssystemer Del 2: System S, dimensioner Pipes and fittings of longitudinally
Læs mere