Vinduer og døre Produktstandard, ydeevneegenskaber Del 1: Vinduer og yderdøre uden brandmodstandsevne og/eller røgtæthedsegenskaber

Transkript

1 Dansk standard DS/EN udgave Vinduer og døre Produktstandard, ydeevneegenskaber Del 1: Vinduer og yderdøre uden brandmodstandsevne og/eller røgtæthedsegenskaber Windows and doors Product standard, performance characteristics Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics

2 DS/EN København DS projekt: ICS: Første del af denne publikations betegnelse er: DS/EN, hvilket betyder, at det er en europæisk standard, der har status som dansk standard. Denne publikations overensstemmelse er: IDT med: EN :2006. DS-publikationen er på dansk og engelsk. I tilfælde af tvivl om den danske oversættelses korrekthed henvises til den engelske version. DS-publikationstyper Dansk Standard udgiver forskellige publikationstyper. Typen på denne publikation fremgår af forsiden. Der kan være tale om: Dansk standard standard, der er udarbejdet på nationalt niveau, eller som er baseret på et andet lands nationale standard, eller standard, der er udarbejdet på internationalt og/eller europæisk niveau, og som har fået status som dansk standard DS-information publikation, der er udarbejdet på nationalt niveau, og som ikke har opnået status som standard, eller publikation, der er udarbejdet på internationalt og/eller europæisk niveau, og som ikke har fået status som standard, fx en teknisk rapport, eller europæisk præstandard DS-håndbog samling af standarder, eventuelt suppleret med informativt materiale DS-hæfte publikation med informativt materiale Til disse publikationstyper kan endvidere udgives tillæg og rettelsesblade DS-publikationsform Publikationstyperne udgives i forskellig form som henholdsvis fuldtekstpublikation (publikationen er trykt i sin helhed) godkendelsesblad (publikationen leveres i kopi med et trykt DS-omslag) elektronisk (publikationen leveres på et elektronisk medie) DS-betegnelse Alle DS-publikationers betegnelse begynder med DS efterfulgt af et eller flere præfikser og et nr., fx DS 383, DS/EN 5414 osv. Hvis der efter nr. er angivet et A eller Cor, betyder det, enten at det er et tillæg eller et rettelsesblad til hovedstandarden, eller at det er indført i hovedstandarden. DS-betegnelse angives på forsiden. Overensstemmelse med anden publikation: Overensstemmelse kan enten være IDT, EQV, NEQ eller MOD IDT: Når publikationen er identisk med en given publikation. EQV: Når publikationen teknisk er i overensstemmelse med en given publikation, men præsentationen er ændret. NEQ: Når publikationen teknisk eller præsentationsmæssigt ikke er i overensstemmelse med en given standard, men udarbejdet på baggrund af denne. MOD: Når publikationen er modificeret i forhold til en given publikation.

3 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN March 2006 ICS English Version Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics Fenêtres et blocs portes pour piétons - Norme produit, caractéristiques de performance - Partie 1 : Fenêtres et blocs portes extérieurs pour piétons sans caractéristiques de résistance au feu, de dégagement de fumée et de feu extérieur, incluant les performances concernant les feux extérieurs des fenêtres de toit This European Standard was approved by CEN on 3 February Fenster und Türen - Produktnorm, Leistungseigenschaften - Teil 1: Fenster und Außentüren ohne Eigenschaften bezüglich Feuerschutz und Rauchdichtheit, aber mit Schutz gegen Brand von außen für Dachflächenfenster CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: rue de Stassart, CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. B-1050 Brussels Ref. No. EN :2006: E

4 EN :2006(E) Contents Page Foreword Scope Normative references Classification standards Test and calculation standards Other standards Terms and definitions Performance characteristics and special requirements General Resistance to wind load Resistance to snow and permanent load Fire characteristics Watertightness Dangerous substances Impact resistance Load-bearing capacity of safety devices Height and width of doorsets and French windows Ability to release Acoustic performance Thermal transmittance Radiation properties Air permeability Durability Operating forces Mechanical strength Ventilation Bullet resistance Explosion resistance Resistance to repeated opening and closing Behaviour between different climates Burglar resistance Special requirements Classification and designation Handling, installation, maintenance and care Evaluation of conformity General Type testing Factory production control (FPC) Labelling and marking...24 Annex A (informative) Interdependence between characteristics and components...25 Annex B (normative) Determination of sound insulation of windows...28 Annex C (informative) Standards and draft standards on glass...32 Annex D (informative) Examples of performance and requirement profiles of a roof window...33 Annex E (normative) Determination of characteristics...35 Annex F (informative) Optional selection of representative test specimens for windows

5 DS/EN :2006 Indholdsfortegnelse Side Forord Emne og anvendelsesområde Normative referencer Klassifikationsstandarder Prøvnings- og beregningsstandarder Andre standarder Termer og definitioner Ydeevneegenskaber og særlige krav Generelt Modstandsevne over for vindlast Modstandsevne over for snelast og permanent last Brandegenskaber Vandtæthed Farlige stoffer Stødpåvirkning Sikkerhedsudstyrs bæreevne Højde og bredde på yderdøre og terrassedøre med fyldning Frigørelsesevne Akustisk ydeevne Termisk transmissionskoefficient Strålingsegenskaber Lufttæthed Holdbarhed Betjeningskraft Mekanisk styrke Ventilation Skudsikkerhed Eksplosionssikkerhed Modstandsevne over for gentagen åbning og lukning Opførsel under forskellige klimaforhold Indbrudssikkerhed Særlige krav Klassifikation og betegnelse Håndtering, installation og vedligeholdelse Evaluering af overensstemmelse Generelt Typeprøvning Fabrikkens egen produktionskontrol (FPC) Etikettering og mærkning Anneks A (informativt) Indbyrdes afhængighed mellem egenskaber og komponenter Anneks B (normativt) Bestemmelse af lydisolering af vinduer Anneks C (informativt) Standarder og forslag til standarder om glas Anneks D (informativt) Eksempler på ydeevne- og kravprofiler for et ovenlysvindue Anneks E (normativt) Bestemmelse af egenskaber Anneks F (informativt) Udvælgelse af repræsentative prøveemner til vinduer (da)

6 EN :2006 (E) Annex G (informative) Examples of test sequences for optional combined determination of characteristics for windows...41 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Product Directive...42 Annex ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC...54 Annex ZC (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 73/23/EEC...55 Bibliography...56 Figures Figure 1 Relationship between various standards...4 Tables Table 1 Classification of characteristics for windows Table 2 Classification of characteristics for external pedestrian doorsets Table A.1 Interdependence between characteristics and components Table B.1 R w for window based on R w for IGU Table B.2 R w + C tr for window based on R w + C tr for IGU Table B.3 Extrapolation rules for different window sizes Table D.1 Examples of performance and requirement profiles of a roof window Table E.1 Separate determination of characteristics for windows Table E.2 Separate determination of characteristics for external pedestrian doorsets Table F.1 Optional selection of representative test specimens for windows Table G.1 Examples of optional test sequences for combined determination of characteristics for windows 41 Table ZA.1 Relevant clauses (performance characteristics) Table ZA.2 System(s) of attestation of conformity (AoC) for external pedestrian doorsets and windows (including roof windows) Table ZA.3a Assignation of evaluation of conformity tasks for products under AoC system Table ZA.3b Assignation of evaluation of conformity tasks for products under AoC system

7 DS/EN :2006 Anneks G (informativt) Eksempler på prøvningssekvenser for kombineret bestemmelse af egenskaber for vinduer Anneks ZA (informativt) Punkter i denne europæiske standard, der vedrører bestemmelserne i Byggevaredirektivet Anneks ZB (informativt) Sammenhæng mellem denne europæiske standard og de væsentlige krav i EU-direktiv 98/37/EF Anneks ZC (informativt) Sammenhæng mellem denne europæiske standard og de væsentlige krav i EU-direktiv 73/23/EØF Bibliografi Figurer Figur 1 Sammenhæng mellem de forskellige standarder... 4 Tabeller Tabel 1 Klassifikation af egenskaber for vinduer Tabel 2 Klassifikation af egenskaber for yderdøre Tabel A.1 Indbyrdes afhængighed mellem egenskaber og komponenter Tabel B.1 R w for vindue på basis af R w for termoruder Tabel B.2 R w + C tr for vindue på basis af R w + C tr for termoruder Tabel B.3 Ekstrapolationsregler for forskellige størrelser vinduer Tabel D.1 Eksempler på ydeevne- og kravprofiler for et ovenlysvindue Tabel E.1 Separat bestemmelse af egenskaber for vinduer Tabel E.2 Separat bestemmelse af egenskaber for yderdøre Tabel F.1 Udvælgelse af repræsentative prøveemner for vinduer Tabel G.1 Eksempler på prøvningssekvenser for kombineret bestemmelse af egenskaber for vinduer Tabel ZA.1 Relevante punkter (ydeevneegenskaber) Tabel ZA.2 System(er) for attestering af overensstemmelse (AoC) for yderdøre og vinduer (herunder ovenlysvinduer) Tabel ZA.3a Fordeling af opgaver ved vurdering af overensstemmelse under AoC-system Tabel ZA.3b Fordeling af opgaver ved vurdering af overensstemmelse under AoC-system (da)

8 EN :2006(E) Foreword This European Standard (EN :2006) has been prepared by Technical Committee CEN/TC 33 Doors, windows, shutters, building hardware and curtain walling, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2006, and conflicting national standards shall be withdrawn at the latest by December This European Standard is one of a series of standards for windows and pedestrian doorsets (see Figure 1). EN , Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics (Harmonized standard) pren , Windows and doors - Product standard, performance characteristics - Part 3: Windows and pedestrian doorsets with resistance to fire and/or smoke leakage characteristics (Harmonized standard) pren , Windows and doors - Product standard, performance characteristics - Part 2: Internal pedestrian doorsets without resistance to fire and/or smoke leakage characteristics (Harmonized standard) Supporting standards, prepared by CEN/TC 33 or others TCs, identified in Clause 2 of the supported standards EN 14600, Doorsets and openable windows with fire resisting and/or smoke control characteristics - Requirements and classification 4 Figure 1 Relationship between various standards Parts of this European Standard have been prepared under the mandates M/101 (M/126) and M/122 given to CEN by the European Commission and the Free Trade Association and support the essential requirements of European Directives. For relationship with European Directives, see informative Annexes ZA, ZB and ZC, which are integral parts of this European Standard. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

9 DS/EN :2006 Forord Dette dokument (EN :2006) er udarbejdet af teknisk komité CEN/TC 33, Doors, windows, shutters, building hardware and curtain walling, hvis sekretariat varetages af AFNOR. Denne europæiske standard skal inden september 2006 have status som national standard, enten ved at der udgives en identisk tekst, eller ved formel godkendelse, og modstridende nationale standarder skal være trukket tilbage senest december Denne europæiske standard er én ud af en serie standarder for vinduer og døre (se figur 1). EN , Vinduer og døre Produktstandard, ydeevneegenskaber Del 1: Vinduer og yderdøre uden brandmodstandsevne og/eller røgtæthedsegenskaber (harmoniseret standard) Understøttende standarder, udarbejdet af CEN/TC 33 eller andre TC er, angivet i punkt 2 i de understøttede standarder pren , Vinduer og døre Produktstandard, ydeevneegenskaber Del 3: Vinduer og døre med brandmodstandsevne og/eller røgtæthedsegenskaber (harmoniseret standard) Figur 1 Sammenhæng mellem de forskellige standarder pren , Vinduer og døre Produktstandard, ydeevneegenskaber Del 2: Indvendige døre uden brandmodstandsevne og/eller røgtæthedsegenskaber (harmoniseret standard) EN 14600, Dørsæt og oplukkelige vinduer med styringsegenskaber for brand- og/eller røgtæthed Krav og klassifikation Dele af denne europæiske standard er udarbejdet af CEN i henhold til mandat M/101 (M/126) og M/122 fra Kommissionen for de Europæiske Fællesskaber og EFTA, og de underbygger væsentlige krav i europæiske direktiver. Sammenhængen med europæiske direktiver er angivet i de informative annekser ZA, ZB og ZC, der er integrerede dele af denne europæiske standard. I henhold til CEN/CENELEC s interne regler er de nationale standardiseringsorganisationer i følgende lande forpligtet til at implementere denne europæiske standard: Belgien, Cypern, Danmark, Estland, Finland, Frankrig, Grækenland, Holland, Irland, Island, Italien, Letland, Litauen, Luxembourg, Malta, Norge, Polen, Portugal, Rumænien, Schweiz, Slovakiet, Slovenien, Spanien, Storbritannien, Sverige, Tjekkiet, Tyskland, Ungarn og Østrig. 4 (da)

10 EN :2006 (E) 1 Scope This European Standard identifies material independent performance characteristics that are applicable to windows (including roof windows, roof windows with external fire resistance and French windows), external pedestrian doorsets (including unframed glass doorsets, escape route doorsets) and screens. This European Standard applies to: Manually or power operated windows, French windows and screens for installation in vertical wall apertures and roof windows for installation in inclined roofs, complete with: related hardware, if any; weather stripping, if any; glazed apertures when intended to have glazed apertures; with or without incorporated shutters and/or shutterboxes and/or blinds; and manually or power operated windows, roof windows, French windows and screens that are fully or partially glazed including any non-transparent infill; fixed or partly fixed or openable with one or more casements/sashes (e.g. hinged, projecting, pivoted, sliding). Manually or power operated external pedestrian doorsets with flush or panelled leaves, complete with: integral fanlights, if any; adjacent parts that are contained within a single frame for inclusion in a single aperture, if any. The products covered by this European Standard are not assessed for structural applications. This European Standard does not apply to: windows and pedestrian doorsets subject to regulations on smoke leakage and resistance to fire according to pren but individual characteristics and performance requirements given in clause 4 can be relevant for these doors and windows (see pren ); rooflights according to EN 1873 and pren 14963; curtain walling according to EN 13830; industrial, commercial and garage doors and gates according to EN ; internal pedestrian doorsets according to pren but individual characteristics and performance requirements given in clause 4 can be relevant for internal doors (see pren ); revolving doorsets; windows for escape routes. 5

11 DS/EN : Emne og anvendelsesområde Denne europæiske standard identificerer materialeuafhængige ydeevneegenskaber, som gælder for vinduer (herunder ovenlysvinduer, ovenlysvinduer med udvendig brandmodstandsevne og terrassedøre med fyldning), yderdøre (herunder glasdøre uden rammer, døre til flugtveje) og dør- og vinduespartier. Denne europæiske standard gælder for: manuelt betjente eller elektrisk drevne vinduer, terrassedøre med fyldning og dør- og vinduespartier til installation i lodrette vægåbninger og ovenlysvinduer til installation i skrå tage, komplette med: evt. tilhørende beslag evt. tætningslister glaspartier, hvor dette er påtænkt med eller uden indbyggede skodder og/eller topkasser og/eller afskærmninger og manuelt betjente eller elektrisk drevne vinduer, ovenlysvinduer, terrassedøre med fyldning og dør- og vinduespartier, som er: monteret med glas samt evt. uigennemsigtig fyldning helt eller delvis fastgjort, eller oplukkelige, med en eller flere vinduesrammer (fx hængslede, topstyrede, pivothængte vinduer, skydevinduer) manuelt betjente eller elektrisk drevne yderdøre med glatte dørblade eller fyldningsdøre, komplette med: evt. integrerede glaspartier over døren evt. integrerede tilstødende dele. Byggevarerne omfattet af denne europæiske standard vurderes ikke med henblik på konstruktionsformål. Denne europæiske standard gælder ikke for: vinduer og døre, som er omfattet af lovgivning om røgtæthed og brandmodstandsevne i henhold til pren , dog kan individuelle egenskaber og ydeevnekrav angivet i pkt. 4 være relevante for disse døre og vinduer (se pren ) lyskupler i henhold til EN 1873 og pren curtain walling i henhold til EN porte til industri og andre erhverv samt garageporte i henhold til EN indvendige døre i henhold til pren , dog kan individuelle egenskaber og ydeevnekrav angivet i pkt. 4 være relevante for indvendige døre (se pren ) karruseldøre vinduer til flugtveje. 5 (da)

12 EN :2006(E) 2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. 2.1 Classification standards EN 1192, Doors Classification of strength requirements EN 1522, Windows, doors, shutters and blinds Bullet resistance Requirements and classification ENV 1627, Windows, doors, shutters Burglar resistance Requirements and classification EN 12207:1999, Windows and doors Air permeability Classification EN 12208, Windows and doors Watertightness Classification EN 12210, Windows and doors Resistance to wind load Classification EN 12217, Doors Operating forces Requirements and classification EN 12219, Doors Climatic influences Requirements and classification EN 12400, Windows and pedestrian doors Mechanical durability Requirements and classification EN 13049, Windows Soft and heavy body impact Test method, safety requirements and classification EN 13115, Windows Classification of mechanical properties Racking, torsion and operating forces EN , Windows, doors and shutters Explosion resistance Requirements and classification Part 1: Shock tube EN , Windows, doors, and shutters Explosion resistance Requirements and classification Part 2: Range test 2.2 Test and calculation standards EN 179, Building hardware Emergency exit devices operated by a lever handle or push pad Requirements and test methods EN 410, Glass in building Determination of luminous and solar characteristics of glazing EN 947, Hinged or pivoted doors Determination of the resistance to vertical load EN 948, Hinged or pivoted doors Determination of the resistance to static torsion EN 949, Windows and curtain walling, doors, blinds and shutters Determination of the resistance to soft and heavy body impact for doors EN 950, Door leaves Determination of the resistance to hard body impact EN 1026, Windows and doors Air permeability Test method EN 1027, Windows and doors Watertightness Test method EN 1121, Doors Behaviour between two different climates Test method 6

13 DS/EN : Normative referencer Følgende nævnte dokumenter er absolut nødvendige for anvendelsen af denne europæiske standard. For daterede referencer gælder kun den nævnte udgave. For udaterede referencer gælder den nyeste udgave af det pågældende dokument (med tillæg). 2.1 Klassifikationsstandarder EN 1192, Doors Classification of strength requirements EN 1522, Windows, doors, shutters and blinds Bullet resistance Requirements and classification ENV 1627, Windows, doors, shutters Burglar resistance Requirements and classification EN 12207:1999, Windows and doors Air permeability Classification EN 12208, Windows and doors Watertightness Classification EN 12210, Windows and doors Resistance to wind load Classification EN 12217, Doors Operating forces Requirements and classification EN 12219, Doors Climatic influences Requirements and classification EN 12400, Windows and pedestrian doors Mechanical durability Requirements and classification EN 13049, Windows Soft and heavy body impact Test method, safety requirements and classification EN 13115, Windows Classification of mechanical properties Racking, torsion and operating forces EN , Windows, doors and shutters Explosion resistance Requirements and classification Part 1: Shock tube EN , Windows, doors, and shutters Explosion resistance Requirements and classification Part 2: Range test. 2.2 Prøvnings- og beregningsstandarder EN 179, Building hardware Emergency exit devices operated by a lever handle or push pad Requirements and test methods EN 410, Glass in building Determination of luminous and solar characteristics of glazing EN 947, Hinged or pivoted doors Determination of the resistance to vertical load EN 948, Hinged or pivoted doors Determination of the resistance to static torsion EN 949, Windows and curtain walling, doors, blinds and shutters Determination of the resistance to soft and heavy body impact for doors EN 950, Door leaves Determination of the resistance to hard body impact EN 1026, Windows and doors Air permeability Test method EN 1027, Windows and doors Watertightness Test method EN 1121, Doors Behaviour between two different climates Test method 6 (da)

14 EN :2006 (E) EN 1125, Building hardware Panic exit devices operated by a horizontal bar Requirements and test methods ENV 1187, Test methods for external fire exposure to roofs EN 1191, Windows and doors Resistance to repeated opening and closing Test method EN 1523, Windows, doors, shutters and blinds Bullet resistance Test method ENV 1628, Windows, doors, shutters Burglar resistance Test method for the determination of resistance under static loading ENV 1629, Windows, doors, shutters Burglar resistance Test method for the determination of resistance under dynamic loading ENV 1630, Windows, doors, shutters Burglar resistance Test method for the determination of resistance to manual burglary attempts EN , Operating forces Test method Part 1: Windows EN , Operating forces Test method Part 2: Doors EN 12211, Windows and doors Resistance to wind load Test method EN , Building acoustics Estimation of acoustic performance of buildings from the performance of elements Part 3: Airborne sound insulation against outdoor sound EN 12758:2002, Glass in building Glazing and airborne sound insulation Product descriptions and determination of properties EN , Windows, doors and shutters Explosion resistance Test method Part 1: Shock tube EN , Windows, doors and shutters Explosion resistance Test method Part 2: Range test EN :2004, Ventilation for buildings Performance testing of components/products for residential ventilation Part 1: Externally and internally mounted air transfer devices EN , Solar protection devices combined with glazing Calculation of solar and light transmittance Part 1: Simplified method EN , Solar protection devices combined with glazing Calculation of total solar energy transmittance and light transmittance - Part 2: Detailed calculation method ENV 13420, Windows Behaviour between different climates Test method EN 14608, Windows Determination of the resistance to racking EN 14609, Windows Determination of the resistance to static torsion EN ISO 140-3, Acoustics Measurement of sound insulation in buildings and of building elements Part 3: Laboratory measurements of airborne sound insulation of building elements (ISO 140-3:1995) EN ISO 717-1, Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation (ISO 717-1:1996) EN ISO :2000, Thermal performance of windows, doors and shutters Calculation of thermal transmittance Part 1: Simplified method (ISO :2000) EN ISO , Thermal performance of windows, doors and shutters Calculation of thermal transmittance Part 2: Numerical method for frames (ISO :2003) 7

15 DS/EN :2006 EN 1125, Building hardware Panic exit devices operated by a horizontal bar Requirements and test methods ENV 1187, Test methods for external fire exposure to roofs EN 1191, Windows and doors Resistance to repeated opening and closing Test method EN 1523, Windows, doors, shutters and blinds Bullet resistance Test method ENV 1628, Windows, doors, shutters Burglar resistance Test method for the determination of resistance under static loading ENV 1629, Windows, doors, shutters Burglar resistance Test method for the determination of resistance under dynamic loading ENV 1630, Windows, doors, shutters Burglar resistance Test method for the determination of resistance to manual burglary attempts EN , Operating forces Test method Part 1: Windows EN , Operating forces Test method Part 2: Doors EN 12211, Windows and doors Resistance to wind load Test method EN , Building acoustics Estimation of acoustic performance of buildings from the performance of elements Part 3: Airborne sound insulation against outdoor sound EN 12758:2002, Glass in building Glazing and airborne sound insulation Product descriptions and determination of properties EN , Windows, doors and shutters Explosion resistance Test method Part 1: Shock tube EN , Windows, doors and shutters Explosion resistance Test method Part 2: Range test EN :2004, Ventilation for buildings Performance testing of components/products for residential ventilation Part 1: Externally and internally mounted air transfer devices EN , Solar protection devices combined with glazing Calculation of solar and light transmittance Part 1: Simplified method EN , Solar protection devices combined with glazing Calculation of total solar energy transmittance and light transmittance - Part 2: Detailed calculation method ENV 13420, Windows Behaviour between different climates Test method EN 14608, Windows Determination of the resistance to racking EN 14609, Windows Determination of the resistance to static torsion EN ISO 140-3, Acoustics Measurement of sound insulation in buildings and of building elements Part 3: Laboratory measurements of airborne sound insulation of building elements (ISO 140-3:1995) EN ISO 717-1, Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation (ISO 717-1:1996) EN ISO :2000, Thermal performance of windows, doors and shutters Calculation of thermal transmittance Part 1: Simplified method (ISO :2000) EN ISO , Thermal performance of windows, doors and shutters Calculation of thermal transmittance Part 2: Numerical method for frames (ISO :2003) 7 (da)

16 EN :2006(E) EN ISO , Thermal performance of windows and doors Determination of thermal transmittance by hot box method Part 1: Complete windows and doors (ISO :2000) EN ISO , Thermal performance of windows and doors Determination of thermal transmittance by hot box method Part 2: Roof windows and other projecting windows (ISO :2005) 2.3 Other standards EN , Glass in building Heat strengthened soda lime silicate glass Part 2: Evaluation of conformity/product standard EN , Glass in building Thermally toughened soda lime silicate safety glass Part 2: Evaluation of conformity/product standard EN 12453:2000, Industrial, commercial and garage doors and gates Safety in use of power operated doors Requirements EN 12519:2004, Windows and pedestrian doors Terminology pren , Automatic door systems - Part 1: Product requirements and test methods pren , Automatic door systems - Part 2: Safety at automatic pedestrian doors EN , Fire classification of construction products and building elements Part 1: Classification using test data from reaction to fire tests EN , Fire classification of construction products and building elements Part 5: Classification using test data from external fire exposure to roof tests pren 13633, Building hardware Electrically controlled panic exit systems for use on escape routes Requirements and test methods pren 13637, Building hardware Electrically controlled emergency exit systems for use on escape routes Requirements and test methods EN , Glass in building Heat soaked thermally toughened soda lime silicate safety glass Part 2: Evaluation of conformity/product standard EN , Glass in building Thermally toughened alkaline earth silicate safety glass Part 2: Evaluation of conformity/product standard EN , Household and similar electrical appliances Safety Part 2-103: Particular requirements for drives for gates, doors and windows (IEC :2002) EN , Electromagnetic compatibility (EMC) Part 6-1: Generic standards; Immunity for residential, commercial and light-industrial environments (IEC :1997, modified) EN , Electromagnetic compatibility (EMC) Part 6-3: Generic standards; Emission standard for residential, commercial and light-industrial environments (IEC :1996, modified) EN ISO 9001, Quality management systems Requirements (ISO 9001:2000) EN ISO , Glass in building Laminated glass and laminated safety glass Part 2: Laminated safety glass (ISO :1998) ISO 1000:1992, SI units and recommendations for the use of their multiples and of certain other units 8

17 DS/EN :2006 EN ISO , Thermal performance of windows and doors Determination of thermal transmittance by hot box method Part 1: Complete windows and doors (ISO :2000) EN ISO , Thermal performance of windows and doors Determination of thermal transmittance by hot box method Part 2: Roof windows and other projecting windows (ISO :2005). 2.3 Andre standarder EN , Glass in building Heat strengthened soda lime silicate glass Part 2: Evaluation of conformity/product standard EN , Glass in building Thermally toughened soda lime silicate safety glass Part 2: Evaluation of conformity/product standard EN 12453:2000, Industrial, commercial and garage doors and gates Safety in use of power operated doors Requirements EN 12519:2004, Windows and pedestrian doors Terminology pren , Automatic door systems Part 1: Product requirements and test methods pren , Automatic door systems Part 2: Safety at automatic pedestrian doors EN , Fire classification of construction products and building elements Part 1: Classification using test data from reaction to fire tests EN , Fire classification of construction products and building elements Part 5: Classification using test data from external fire exposure to roof tests pren 13633, Building hardware Electrically controlled panic exit systems for use on escape routes Requirements and test methods pren 13637, Building hardware Electrically controlled emergency exit systems for use on escape routes Requirements and test methods EN , Glass in building Heat soaked thermally toughened soda lime silicate safety glass Part 2: Evaluation of conformity/product standard EN , Glass in building Thermally toughened alkaline earth silicate safety glass Part 2: Evaluation of conformity/product standard EN , Household and similar electrical appliances Safety Part 2-103: Particular requirements for drives for gates, doors and windows (IEC :2002) EN , Electromagnetic compatibility (EMC) Part 6-1: Generic standards; Immunity for residential, commercial and light-industrial environments (IEC :1997, modified) EN , Electromagnetic compatibility (EMC) Part 6-3: Generic standards; Emission standard for residential, commercial and light-industrial environments (IEC :1996, modified) EN ISO 9001, Quality management systems Requirements (ISO 9001:2000) EN ISO , Glass in building Laminated glass and laminated safety glass Part 2: Laminated safety glass (ISO :1998) ISO 1000:1992, SI units and recommendations for the use of their multiples and of certain other units. 8 (da)