Geotekniske in-situ-forsøg Geoteknisk overvågning med feltinstrumentering Del 1: Generelle regler
|
|
- Jeppe Gregersen
- 8 år siden
- Visninger:
Transkript
1 Dansk standard DS/EN ISO : udgave Geotekniske in-situ-forsøg Geoteknisk overvågning med feltinstrumentering Del 1: Generelle regler Geotechnical investigation and testing Geotechnical monitoring by field instrumentation Part 1: General rules
2 DS/EN ISO :2015 København DS projekt: M ICS: ; Første del af denne publikations betegnelse er: DS/EN ISO, hvilket betyder, at det er en international standard, der har status både som europæisk og dansk standard. Denne publikations overensstemmelse er: IDT med: ISO :2015. IDT med: EN ISO :2015. DS-publikationen er på engelsk. DS-publikationstyper Dansk Standard udgiver forskellige publikationstyper. Typen på denne publikation fremgår af forsiden. Der kan være tale om: Dansk standard standard, der er udarbejdet på nationalt niveau, eller som er baseret på et andet lands nationale standard, eller standard, der er udarbejdet på internationalt og/eller europæisk niveau, og som har fået status som dansk standard DS-information publikation, der er udarbejdet på nationalt niveau, og som ikke har opnået status som standard, eller publikation, der er udarbejdet på internationalt og/eller europæisk niveau, og som ikke har fået status som standard, fx en teknisk rapport, eller europæisk præstandard DS-håndbog samling af standarder, eventuelt suppleret med informativt materiale DS-hæfte publikation med informativt materiale Til disse publikationstyper kan endvidere udgives tillæg og rettelsesblade DS-publikationsform Publikationstyperne udgives i forskellig form som henholdsvis fuldtekstpublikation (publikationen er trykt i sin helhed) godkendelsesblad (publikationen leveres i kopi med et trykt DS-omslag) elektronisk (publikationen leveres på et elektronisk medie) DS-betegnelse Alle DS-publikationers betegnelse begynder med DS efterfulgt af et eller flere præfikser og et nr., fx DS 383, DS/EN 5414 osv. Hvis der efter nr. er angivet et A eller Cor, betyder det, enten at det er et tillæg eller et rettelsesblad til hovedstandarden, eller at det er indført i hovedstandarden. DS-betegnelse angives på forsiden. Overensstemmelse med anden publikation: Overensstemmelse kan enten være IDT, EQV, NEQ eller MOD IDT: Når publikationen er identisk med en given publikation. EQV: Når publikationen teknisk er i overensstemmelse med en given publikation, men præsentationen er ændret. NEQ: Når publikationen teknisk eller præsentationsmæssigt ikke er i overensstemmelse med en given standard, men udarbejdet på baggrund af denne. MOD: Når publikationen er modificeret i forhold til en given publikation.
3 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN ISO May 2015 ICS ; English Version Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 1: General rules (ISO :2015) Reconnaissance et essais géotechniques - Surveillance géotechnique par instrumentation in situ - Partie 1: Règles générales (ISO :2015) Geotechnische Erkundung und Untersuchung - Geotechnische Messungen - Teil 1: Allgemeine Regeln (ISO :2015) This European Standard was approved by CEN on 30 April CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO :2015 E
4 EN ISO :2015 (E) Contents Page Foreword...3 2
5 EN ISO :2015 (E) Foreword This document (EN ISO :2015) has been prepared by Technical Committee ISO/TC 182 "Geotechnics" in collaboration with Technical Committee CEN/TC 341 Geotechnical Investigation and Testing the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2015, and conflicting national standards shall be withdrawn at the latest by November Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO :2015 has been approved by CEN as EN ISO :2015 without any modification. 3
6
7 INTERNATIONAL STANDARD ISO First edition Geotechnical investigation and testing Geotechnical monitoring by field instrumentation Part 1: General rules Reconnaissance et essais géotechniques Surveillance géotechnique par instrumentation in situ Partie 1: Règles générales Reference number ISO :2015(E) ISO 2015
8 ISO :2015(E) COPYRIGHT PROTECTED DOCUMENT ISO 2015, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISO s member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel Fax copyright@iso.org ii ISO 2015 All rights reserved
9 ISO :2015(E) Contents Page Foreword...iv 1 Scope Normative references Terms and symbols Terms Symbols Principal requirements Geotechnical monitoring in connection with geotechnical design Geotechnical monitoring in connection with specific questions Requirements of a geotechnical monitoring project Geodetic measurements Safety requirements Requirements of a geotechnical monitoring system General Robustness Influencing factors Redundancy Stability of sensor signal Function check and calibration Location of measuring points and geotechnical parameters Location of measuring points The measuring points can be located at free surfaces, at the interface between any two media, or inside of a medium Measurement and monitoring of geotechnical parameters Carrying out the measurements Data processing and verification Reporting Installation report Monitoring report...11 Annex A (normative) Minimum requirements on content of instrument data sheets...13 Annex B (normative) Geotechnical measurements in boreholes...14 Annex C (informative) Field measurements in connection with the design and construction of geotechnical structures...17 Annex D (informative) Measurement and monitoring of geotechnical key parameters...19 Annex E (informative) Types of instruments and monitoring methods commonly used...21 Bibliography...27 ISO 2015 All rights reserved iii
10 ISO :2015(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO s adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information ISO was prepared by European Committee for Standardization (CEN) in collaboration with ISO/TC 182, Geotechnics, Subcommittee SC 01, Geotechnical investigation and testing, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). ISO consists of the following parts, under the general title Geotechnical investigation and testing Geotechnical monitoring by field instrumentation: Part 1: General rules The following parts are under preparation: Part 2: Displacement measurements along a line: Extensometers The following parts are planned: Part 3: Displacement measurements across a line: Inclinometers Part 4: Piezometers Part 5: Total pressure cells Part 6: Hydraulic settlement gauges Part 7: Strain gauges Part 8: Load cells Part 9: Geodetic monitoring instruments Part 10: Vibration monitoring instruments NOTE For further information on geotechnical monitoring by field instrumentation, see References [1] to [7]. iv ISO 2015 All rights reserved
11 INTERNATIONAL STANDARD ISO :2015(E) Geotechnical investigation and testing Geotechnical monitoring by field instrumentation Part 1: General rules 1 Scope This part of ISO lays out the general rules for the performance monitoring of the ground, of structures interacting with the ground, of geotechnical fills, and of geotechnical works. NOTE ISO fulfils the requirements for general rules for the performance monitoring of the ground, of structures interacting with the ground, of geotechnical fills, and of geotechnical works as part of the geotechnical investigation and testing according to EN [8] and EN [9]. Specifically, this part of ISO applies to field instrumentation and measurements carried out in connection with site investigations of soils and rocks, in connection with Observational Design procedures, in connection with the performance of geotechnical structures before, during, and after construction, for ground behaviour evaluation, e.g. unstable slopes, consolidation etc., for the proof or follow-up of a new equilibrium within the ground, after disturbance of its natural state by construction measures (e.g. foundation loads, excavation of soil, tunnelling), for the proof or follow-up of the stability, serviceability, and safety of structures and operations which might be influenced by geotechnical construction, for perpetuation of evidence, and for the evaluation and control of geotechnical works. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO , Geotechnical investigation and testing Identification and classification of soil Part 1: Identification and description ISO , Geotechnical investigation and testing Identification and classification of rock Part 1: Identification and description ISO , Geotechnical investigation and testing Sampling methods and groundwater measurements Part 1: Technical principles for execution ISO/IEC Guide 99:2007, International vocabulary of metrology Basic and general concepts and associated terms (VIM) IEC 60529, Degrees of protection provided by enclosures (IP Code) ISO 2015 All rights reserved 1
Dansk standard DS/EN ISO udgave Campingtelte. Camping tents
Dansk standard DS/EN ISO 5912 2. udgave 2011-11-22 Campingtelte Camping tents DS/EN ISO 5912 København DS projekt: M245636 ICS: 97.200.30 Første del af denne publikations betegnelse er: DS/EN ISO, hvilket
Læs mereTekniske specifikationer for centrifugalpumper Klasse III
Dansk standard Tillæg DS/EN ISO 9908/A1 1. udgave 2011-06-08 Tekniske specifikationer for centrifugalpumper Klasse III Technical specifications for centrifugal pumps Class III Amendment 1 DS/EN ISO 9908/A1
Læs mereKrydderier og smagsstoffer Botanisk nomenklatur
Dansk standard DS/EN ISO 676 1. udgave 2009-07-23 Krydderier og smagsstoffer Botanisk nomenklatur Spices and condiments Botanical nomenclature DS/EN ISO 676 København DS projekt: M230052 ICS: 01.040.67;
Læs mereKosmetik Metoder til prøvning af solbeskyttelse In vivo-bestemmelse af UVA-beskyttelse
Dansk standard DS/EN ISO 24442 1. udgave 2012-02-01 Kosmetik Metoder til prøvning af solbeskyttelse In vivo-bestemmelse af UVA-beskyttelse Cosmetics Sun protection test methods In vivo determination of
Læs merePapir og karton Bestemmelse af tykkelse, densitet og massevolumen
Dansk standard DS/EN ISO 534 1. udgave 2012-01-04 Papir og karton Bestemmelse af tykkelse, densitet og massevolumen Paper and board Determination of thickness, density and specific volume DS/EN ISO 534
Læs mereMalinger og lakker Belysning og procedure for visuel vurdering af belægninger
Dansk standard DS/EN ISO 13076 1. udgave 2012-08-10 Malinger og lakker Belysning og procedure for visuel vurdering af belægninger Paints and varnishes Lighting and procedure for visual assessments of coatings
Læs merePulvermaling Del 7: Bestemmelse af massetab efter ophedning i ovn
Dansk standard DS/EN ISO 8130-7 1. udgave 2011-01-21 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 8130-7:2011 Pulvermaling Del 7: Bestemmelse af massetab efter ophedning
Læs merePlast Bestemmelse af termoplasts massesmelteindeks (MFR) og volumensmelteindeks (MVR) Del 1: Standardmetode
Dansk standard DS/EN ISO 1133-1 1. udgave 2012-01-25 Plast Bestemmelse af termoplasts massesmelteindeks (MFR) og volumensmelteindeks (MVR) Del 1: Standardmetode Plastics Determination of the melt mass-flow
Læs mereMiljøledelsessystemer Kravbeskrivelse med råd om anvendelse
Dansk standard DS/EN ISO 14001 2. udgave 2004-11-30 Miljøledelsessystemer Kravbeskrivelse med råd om anvendelse Environmental management systems Requirements with guidance for use DS/EN ISO 14001 København
Læs mereMajs Bestemmelse af vandindhold (i forarbejdet korn og i hele korn)
Dansk standard DS/EN ISO 6540 1. udgave 2010-06-23 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 6540:2010 Majs Bestemmelse af vandindhold (i forarbejdet korn og i hele
Læs mereGeoteknisk undersøgelse og prøvning Identifikation og klassifikation af jord Del 2: Principper for klassificering
Dansk standard Tillæg DS/EN ISO 14688-2/A1 1. udgave 2013-09-23 Geoteknisk undersøgelse og prøvning Identifikation og klassifikation af jord Del 2: Principper for klassificering Geotechnical investigation
Læs mereTeknisk tegning Flowdiagrammer til procesanlæg Generelle regler
Dansk Standard DS/EN ISO 10628 1. udgave Godkendelsesblad Godkendt:2001-04-06 Teknisk tegning Flowdiagrammer til procesanlæg Generelle regler Flow diagrams for process plants General rules DANSK STANDARD
Læs mereMaintenance Documentation for maintenance
Dansk standard DS/EN 13460 3. udgave 2009-12-15 Vedligehold Dokumentation for vedligehold Maintenance Documentation for maintenance DS/EN 13460 København DS projekt: M245239 ICS: 01.110; 21.020 Første
Læs mereGeoteknisk undersøgelse og prøvning Driftsprøvning Del 3: Standard penetrationstest
Dansk standard Tillæg DS/EN ISO 22476-3/A1 1. udgave 2011-12-22 Geoteknisk undersøgelse og prøvning Driftsprøvning Del 3: Standard penetrationstest Geotechnical investigation and testing Field testing
Læs mereMiljømærkning Egendeklaration af miljøpåstande (Type II miljømærkning)
Dansk standard Tillæg DS/EN ISO 14021/A1 1. udgave 2012-02-08 Miljømærkning Egendeklaration af miljøpåstande (Type II miljømærkning) Environmental labels and declarations Self-declared environmental claims
Læs mereJordbrug Traktorer Bagmonteret trepunktsophæng Kategori 1N, 1, 2N, 2, 3N, 3, 4N og 4
Dansk standard Tillæg DS/ISO 730/Amd 1 1. udgave 2014-08-05 Jordbrug Traktorer Bagmonteret trepunktsophæng Kategori 1N, 1, 2N, 2, 3N, 3, 4N og 4 Agricultural wheeled tractors Rear-mounted threepoint linkage
Læs mereGeometriske produktspecifikationer (GPS) Længdemåleudstyr højdemålere Design og metrologiske karakteristika
Dansk standard DS/EN ISO 13225 1. udgave 2012-05-23 Geometriske produktspecifikationer (GPS) Længdemåleudstyr højdemålere Design og metrologiske karakteristika Geometrical product specifications (GPS)
Læs merePalmeolie Bestemmelse af indeks for forringelse af blegningsevne (DOBI) samt bestemmelse af karotinindhold
Dansk standard DS/EN ISO 17932 2. udgave 2011-11-07 Palmeolie Bestemmelse af indeks for forringelse af blegningsevne (DOBI) samt bestemmelse af karotinindhold Palm oil Determination of the deterioration
Læs mereDansk standard DS/EN Loft ladders Requirements, marking and testing. 1. udgave
Dansk standard DS/EN 14975 1. udgave 2007-02-26 Loftstiger Krav, mærkning og prøvning Loft ladders Requirements, marking and testing DS/EN 14975 København DS projekt: 55746 ICS: 97.145 Første del af denne
Læs mereFritidsbåde Komfurer til flydende brændsel
Dansk standard DS/EN ISO 14895 1. udgave 2003-04-11 Fritidsbåde Komfurer til flydende brændsel Small craft Liquid-fuelled galley stoves DS/EN ISO 14895 København DS projekt: 47074 ICS: 47.080 Deskriptorer:
Læs mereCentrale strømforsyningssystemer
Dansk Standard DS/EN 50171 1. udgave 2001-08-29 Centrale strømforsyningssystemer Central power supply systems DS/EN 50171 København DS projekt: 30769 ICS: 29.200 Deskriptorer: belysning til nødudgang,elektriske
Læs mereSlanger og rør af gummi og plast Måling af fleksibilitet og stivhed Del 2: Bøjeprøvning ved lavere temperaturer end rumtemperatur
Dansk standard DS/EN ISO 10619-2 1. udgave 2012-01-24 Slanger og rør af gummi og plast Måling af fleksibilitet og stivhed Del 2: Bøjeprøvning ved lavere temperaturer end rumtemperatur Rubber and plastics
Læs mereStyring af rumfartsprojekter. Generelle krav. Del 1: Politik og principper
Dansk Standard DS/EN 13290-1 1. udgave Godkendt:2000-04-13 Styring af rumfartsprojekter. Generelle krav. Del 1: Politik og principper Space project management - General requirements - Part 1: Policy and
Læs mereBordtennis Del 2: Netstolper Krav og prøvningsmetoder
Dansk standard DS/EN 14468-2:2015 2. udgave 2015-04-29 Bordtennis Del 2: Netstolper Krav og prøvningsmetoder Table tennis Part 2: Posts for net assemblies Requirements and test methods DS/EN 14468-2:2015
Læs mereMaskinsikkerhed Elektrisk udstyr på maskiner Del 1: Generelle krav
Dansk standard Tillæg DS/EN 60204-1/A1 1. udgave 2009-03-13 Maskinsikkerhed Elektrisk udstyr på maskiner Del 1: Generelle krav Safety of machinery Electrical equipment of machines Part 1: General requirements
Læs mereRotordynamiske pumper Godkendelsesprøvning af hydraulisk ydeevne Klasse 1, 2 og 3
Dansk standard DS/EN ISO 9906 2. udgave 2012-06-08 Rotordynamiske pumper Godkendelsesprøvning af hydraulisk ydeevne Klasse 1, 2 og 3 Rotodynamic pumps Hydraulic performance acceptance tests Grades 1, 2
Læs mereDansk standard DS/EN Risk management Risk assessment techniques. 1. udgave
Dansk standard DS/EN 31010 1. udgave 2010-05-20 Risikoledelse Teknikker til risikovurdering Risk management Risk assessment techniques DS/EN 31010 København DS projekt: M231261 ICS: 03.100.01 Første del
Læs mereLampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler
Dansk standard Tillæg DS/EN 60061-1/A41 (elektronisk) 1. udgave 2010-06-24 Lampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler Lamp caps and holders together
Læs mereØjenoptik Brillestel Målesystem og terminologi
Dansk standard Tillæg DS/EN ISO 8624:2011/A1:2015 1. udgave 2015-09-11 Øjenoptik Brillestel Målesystem og terminologi Ophthalmic optics Spectacle frames Measuring system and terminology DS/EN ISO 8624:2011/A1:2015
Læs mereDansk standard DS/EN 13429. Packaging Reuse. 3. udgave 2006-10-12
Dansk standard DS/EN 13429 3. udgave 2006-10-12 Emballage Genbrug Packaging Reuse DS/EN 13429 København DS projekt: M215981 ICS: 13.030.50; 55.020 Første del af denne publikations betegnelse er: DS/EN,
Læs mereAkustik Støjreduktion Kabiner Laboratorie- og in situ-målinger
Dansk standard DS/EN ISO 11957 2. udgave 2009-09-22 Akustik Støjreduktion Kabiner Laboratorie- og in situ-målinger Acoustics Determination of sound insulation performance of cabins Laboratory and in situ
Læs mereØjenoptik Intraokulære linser Del 9: Multifokale intraokulære linser
Dansk standard Tillæg DS/EN ISO 11979-9/A1 1. udgave 2014-08-28 Øjenoptik Intraokulære linser Del 9: Multifokale intraokulære linser Ophthalmic implants Intraocular lenses Part 9: Multifocal intraocular
Læs mereFritidsbåde Fastinstallerede brændstoftanke til benzin og diesel Tillæg 1
Dansk standard Tillæg DS/EN ISO 21487:2012/A1:2014 1. udgave 2014-12-17 Fritidsbåde Fastinstallerede brændstoftanke til benzin og diesel Tillæg 1 Small craft Permanently installed petrol and diesel fuel
Læs mereElektrostatik Del 4-1: Standardprøvningsmetoder. anvendelser Gulvbelægningers og monterede gulves elektrostatiske egenskaber
Dansk standard Tillæg DS/EN 61340-4-1:2004/A1:2015 1. udgave 2015-06-23 Elektrostatik Del 4-1: Standardprøvningsmetoder for specifikke anvendelser Gulvbelægningers og monterede gulves elektrostatiske egenskaber
Læs mereEurocode 7: Geoteknik Del 1: Generelle regler
Dansk standard Tillæg DS/EN 1997-1/A1 1. udgave 2014-02-03 Eurocode 7: Geoteknik Del 1: Generelle regler Eurocode 7: Geotechnical design Part 1: General rules DS/EN 1997-1/A1 København DS projekt: M267839
Læs mereBærbare motordrevne hækklippere Sikkerhed
Dansk standard Tillæg DS/EN ISO 10517/A1 1. udgave 2013-09-19 Bærbare motordrevne hækklippere Sikkerhed Powered hand-held hedge trimmers Safety DS/EN ISO 10517/A1 København DS projekt: M263321 ICS: 65.060.70
Læs mereSpecifikation og kvalificering af svejseprocedurer for metalliske materialer Kvalificering ved godkendelse af en standardsvejseprocedure
Dansk standard DS/EN ISO 15612 2. udgave 2005-12-22 Specifikation og kvalificering af svejseprocedurer for metalliske materialer Kvalificering ved godkendelse af en standardsvejseprocedure Specification
Læs mereWc-kummer og wc-møbler Tilslutningsdimensioner
Dansk standard DS/EN 33 3. udgave 2011-10-03 Wc-kummer og wc-møbler Tilslutningsdimensioner WC pans and WC suites Connecting dimensions DS/EN 33 København DS projekt: M235262 ICS: 91.140.70 Første del
Læs mereDansk standard DS/EN Weibull analysis. 1. udgave
Dansk standard DS/EN 61649 1. udgave 2008-12-10 Weilbull-analyse Weibull analysis DS/EN 61649 København DS projekt: M219606 ICS: 03.120.30 Første del af denne publikations betegnelse er: DS/EN, hvilket
Læs mereTandpleje Manuelle tandbørster Generelle krav og prøvningsmetoder
Dansk standard DS/EN ISO 20126 2. udgave 2012-04-18 Tandpleje Manuelle tandbørster Generelle krav og prøvningsmetoder Dentistry Manual toothbrushes General requirements and test methods DS/EN ISO 20126
Læs mereMultimedia quality Method of assessment of synchronization of audio and video
Dansk standard DS/EN 62503 1. udgave 2008-10-31 Multimediekvalitet Metode til fastsættelse af synkronisering mellem lyd og billede Multimedia quality Method of assessment of synchronization of audio and
Læs merePackaging Flexible plastic/metal laminate tubes Dimensions and tolerances of nozzle S 13
Dansk standard DS/EN 14979 1. udgave 2006-03-31 Emballage Fleksible laminattuber af plast/metal Dimensioner og tolerancer for dyse S 13 Packaging Flexible plastic/metal laminate tubes Dimensions and tolerances
Læs mereBatchstyring Del 1: Modeller og terminologi
Dansk Standard DS/EN 61512-1 1. udgave 2001-08-29 Batchstyring Del 1: Modeller og terminologi Batch control Part 1: Models and terminology DS/EN 61512-1 København DS projekt: 26009 ICS: 25.040.40 Deskriptorer:
Læs mereControl technology Rules for the designation of measuring instruments
Dansk standard DS/EN 62419 1. udgave 2009-03-10 Styringsteknologi Regler for benævnelse af måleinstrumenter Control technology Rules for the designation of measuring instruments DS/EN 62419 København DS
Læs mereCold rolled narrow steel strip Tolerances on dimensions and shape
Dansk standard DS/EN 10140 3. udgave 2009-06-02 Koldvalset båndstål Tolerancer for dimensioner og form Cold rolled narrow steel strip Tolerances on dimensions and shape DS/EN 10140 København DS projekt:
Læs mereLampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler
Dansk standard Tillæg DS/EN 60061-1/A47 (elektronisk) 1. udgave 2012-04-23 Lampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler Lamp caps and holders together
Læs mereElproducerende vindmøller Del 25-3: Kommunikationssystemer til overvågning og styring af vindmølleparker Modeller for informationsudveksling
Dansk standard DS/EN 61400-25-3 1. udgave 2007-04-27 Elproducerende vindmøller Del 25-3: Kommunikationssystemer til overvågning og styring af vindmølleparker Modeller for informationsudveksling Wind turbines
Læs mereIntegration af virksomhedens styringssystem Del 1: Modeller og terminologi
Dansk standard DS/EN 62264-1 1. udgave 2008-02-01 Integration af virksomhedens styringssystem Del 1: Modeller og terminologi Enterprise-control system integration DS/EN 62264-1 København DS projekt: M222179
Læs mereCOPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 8501-4:2007#
Dansk standard DS/EN ISO 8501-4 1. udgave 2007-01-29 Forbehandling af ståloverflader før påføring af maling og lignende produkter Visuel vurdering af overfladens renhed Del 4: Karakterisering af overfladens
Læs mereFaste modstande til brug i elektronisk udstyr Del 1: Generisk specifikation
Dansk standard Tillæg DS/EN 60115-1:2011/ A11:2015 1. udgave 2015-05-18 Faste modstande til brug i elektronisk udstyr Del 1: Generisk specifikation Fixed resistors for use in electronic equipment Part
Læs mereKapslingsklasser (IP-kode)
Dansk Standard DS/EN 60529+A1 1. udgave 2002-04-05 Kapslingsklasser (IP-kode) Degrees of protection provided by enclosures (IP Code) DS/EN 60529+A1 København DS projekt: 47050 ICS: 29.020 Deskriptorer:
Læs mereVinduer og døre Vandtæthed Klassifikation
Dansk Standard DS/EN 12208 1. udgave Godkendt:2000-12-29 Vinduer og døre Vandtæthed Klassifikation Windows and doors Watertightness Classification DANSK STANDARD - Eftertryk uden tilladelse forbudt Kollegievej
Læs mereIkke-destruktiv prøvning Lækprøvning Kriterier for valg af metode og teknik
Dansk Standard DS/EN 1779 2. udgave 2001-10-26 Ikke-destruktiv prøvning Lækprøvning Kriterier for valg af metode og teknik Non-destructive testing Leak testing Criteria for method and technique selection
Læs mereSvejsekoordination Opgaver og ansvarsforhold
Dansk standard DS/EN ISO 14731 1. udgave 2006-11-06 Svejsekoordination Opgaver og ansvarsforhold Welding coordination Tasks and responsibilities DS/EN ISO 14731:2006 København DS projekt: 55660 ICS: 25.160.01
Læs mereGødning Ekstraktion af vandopløseligt calcium, magnesium, natrium og svovl i form af sulfat
Dansk standard DS/EN 15961 1. udgave 2012-01-06 Gødning Ekstraktion af vandopløseligt calcium, magnesium, natrium og svovl i form af sulfat Fertilizers Extraction of water-soluble calcium, magnesium, sodium
Læs mereTemperature Electromotive force (EMF) tables for pure-element thermocouple combinations
Dansk standard DS/EN 62460 1. udgave 2008-10-14 Temperatur Elektromotorisk kraft (EMF) Tabeller for kombinationer af rene termoelementer Temperature Electromotive force (EMF) tables for pure-element thermocouple
Læs mereMobil og bærbar DVB-T/H-radiotilslutning Del 2: Grænsefladeoverensstemmelsesprøvning
Dansk standard DS/EN 62002-2 1. udgave 2006-12-12 Mobil og bærbar DVB-T/H-radiotilslutning Del 2: Grænsefladeoverensstemmelsesprøvning Mobile and portable DVB-T/H radio access Part 2: Interface conformance
Læs mereHalvlederelementer Mekaniske og klimatiske prøvningsmetoder Del 33: Accelereret fugtbestandighed Objektiv autoklav
Dansk standard DS/EN 60749-33 1. udgave 2004-04-29 Halvlederelementer Mekaniske og klimatiske prøvningsmetoder Del 33: Accelereret fugtbestandighed Objektiv autoklav Semiconductor devices Mechanical and
Læs merePrøvningsmetoder til hjælpekomponenter til murværk Del 4: Bestemmelse af lastkapacitet og lastnedbøjning i bjælkesko
Dansk standard DS/EN 846-4 + A1 2. udgave 2002-12-04 Prøvningsmetoder til hjælpekomponenter til murværk Del 4: Bestemmelse af lastkapacitet og lastnedbøjning i bjælkesko Methods of test for ancillary components
Læs mereStørrelser og enheder Del 13: Informationsvidenskab og -teknologi
Dansk standard DS/EN 80000-13 1. udgave 2008-08-22 Størrelser og enheder Del 13: Informationsvidenskab og -teknologi Quantities and units Part 13: Information science and technology DS/EN 80000-13 København
Læs mereKøkkengrej Grafiske symboler (piktogrammer)
Dansk standard DS/EN 14916 1. udgave 2005-11-14 Køkkengrej Grafiske symboler (piktogrammer) Domestic cookware Graphical symbols (pictograms) DS/EN 14916 København DS projekt: 55114 ICS: 01.080.20; 97.040.60
Læs mereCOPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO/HL7 27953-1:2012
Dansk standard DS/EN ISO/HL7 27953-1 1. udgave 2012-02-24 Sundhedsinformatik Overvågning af lægemidlers bivirkninger Individuel bivirkningsrapport (ICSR) Del 1: Arkitektur for rapportering af utilsigtede
Læs mereAkustik Deklarering og verificering af støj fra maskiner og udstyr
Dansk standard DS/EN ISO 4871 2. udgave 2009-09-09 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 4871:2009 Akustik Deklarering og verificering af støj fra maskiner og udstyr
Læs mereUdstyr til tilslutning af belysningsarmaturer til husholdningsbrug o.l. Del 2: Normblade for DCL
Dansk standard DS/EN 61995-2 1. udgave 2009-06-10 Udstyr til tilslutning af belysningsarmaturer til husholdningsbrug o.l. Del 2: Normblade for DCL Devices for the connection of luminaires for household
Læs mereFysiske størrelser og enheder Del 14: Telebiometri relateret til human fysiologi
Dansk standard DS/EN 80000-14 1. udgave 2009-05-27 Fysiske størrelser og enheder Del 14: Telebiometri relateret til human fysiologi Quantities and units Part 14: Telebiometrics related to human physiology
Læs mereEurocode 1: Last på bærende konstruktioner Del 1-3: Generelle laster Snelast
Dansk standard DS/EN 1991-1-3 2. udgave 2007-06-22 Eurocode 1: Last på bærende konstruktioner Del 1-3: Generelle laster Snelast Eurocode 1 Actions on structures Part 1-3: General actions - Snow loads DS/EN
Læs mereEnergiledelsessystemets grænseflade til applikationsprogrammer (EMS-API) Del 453: CIM-baseret grafisk udveksling
Dansk standard DS/EN 61970-453 1. udgave 2008-09-26 Energiledelsessystemets grænseflade til applikationsprogrammer (EMS-API) Del 453: CIM-baseret grafisk udveksling Energy management system application
Læs mereGrænseflade for digital lyd Del 1: Generelt
Dansk standard Tillæg DS/EN 60958-1/A1 1. udgave 2014-09-02 Grænseflade for digital lyd Del 1: Generelt Digital audio interface Part 1: General DS/EN 60958-1/A1 København DS projekt: M277911 ICS: 33.160.30
Læs mereLedelse af en virksomhed frem mod vedvarende succes - med afsæt i kvalitetsledelse
Dansk standard DS/EN ISO 9004 2. udgave 2009-11-12 Ledelse af en virksomhed frem mod vedvarende succes - med afsæt i kvalitetsledelse Managing for the sustained success of an organization A quality management
Læs mereSteel castings Austenitic manganese steel castings
Dansk standard DS/EN 10349 1. udgave 2009-11-05 Stålstøbegods Austenitisk manganstålstøbegods Steel castings Austenitic manganese steel castings DS/EN 10349 København DS projekt: M220956 ICS: 77.140.80
Læs mereGrænseflade for digital lyd Del 1: Generelt
Dansk standard DS/EN 60958-1 3. udgave 2008-10-31 Grænseflade for digital lyd Del 1: Generelt Digital audio interface Part 1: General DS/EN 60958-1 København DS projekt: M222433 ICS: 33.160.30 Første del
Læs mereLedelse af pålidelighedsaktiviteter Del 3-11: Anvendelsesvejledning Pålidelighedscentreret vedligehold (RCM)
Dansk standard DS/EN 60300-3-11 1. udgave 2009-12-10 Ledelse af pålidelighedsaktiviteter Del 3-11: Anvendelsesvejledning Pålidelighedscentreret vedligehold (RCM) Dependability management Part 3-11: Application
Læs mereKontormøbler Kontorstole Del 1: Mål Bestemmelse af dimensioner
Dansk Standard DS/EN 1335-1 2. udgave Godkendt: 2001-02-21 Kontormøbler Kontorstole Del 1: Mål Bestemmelse af dimensioner Office furniture Office work chair Part 1: Dimensions Determination of dimensions
Læs mereSkovbrugs- og havebrugsmaskiner Vibrationsprøvning af bærbare håndholdte maskiner med forbrændingsmotor Vibrationer ved håndtagene
Dansk standard DS/EN ISO 22867 3. udgave 2012-01-25 Skovbrugs- og havebrugsmaskiner Vibrationsprøvning af bærbare håndholdte maskiner med forbrændingsmotor Vibrationer ved håndtagene Forestry and gardening
Læs mereLoddefri forbindelser Del 2: Krimpede forbindelser Generelle krav, prøvningsmetoder og praktisk vejledning
Dansk standard Tillæg DS/EN 60352-2/A1 1. udgave 2013-09-26 Loddefri forbindelser Del 2: Krimpede forbindelser Generelle krav, prøvningsmetoder og praktisk vejledning Solderless connections Part 2: Crimped
Læs mereFugtindhold af et stykke savet træ Del 2: Vurdering ved elektrisk modstandsmetode
Dansk Standard DS/EN 13183-2 1. udgave 2002-04-30 Fugtindhold af et stykke savet træ Del 2: Vurdering ved elektrisk modstandsmetode Moisture content of a piece of sawn timber Part 2: Estimation by electrical
Læs mereAudioudstyr og audiovisuelt udstyr Digitale audiodele Grundlæggende metoder til måling af audiokarakteristika Del 4: Personlig computer
Dansk standard DS/EN 61606-4 1. udgave 2007-02-08 Audioudstyr og audiovisuelt udstyr Digitale audiodele Grundlæggende metoder til måling af audiokarakteristika Del 4: Personlig computer Audio and audiovisual
Læs mereTilsatsmaterialer til svejsning Pulverfyldte elektroder til metallysbuesvejsning
Dansk standard DS/EN ISO 12153 1. udgave 2012-06-08 Tilsatsmaterialer til svejsning Pulverfyldte elektroder til metallysbuesvejsning med eller uden beskyttelsesgas af nikkel og nikkellegeringer Klassifikation
Læs mereLegepladsredskaber og -underlag Del 11: Tredimensionelle klatrenet Supplerende specifikke sikkerhedskrav og prøvningsmetoder
Dansk standard DS/EN 1176-11 2. udgave 2009-04-22 Legepladsredskaber og -underlag Del 11: Tredimensionelle klatrenet Supplerende specifikke sikkerhedskrav og prøvningsmetoder Playground equipment and surfacing
Læs mereVedligehold af udstyr Del 3: Verifikation og indsamling, analyse og præsentation af data
Dansk standard DS/EN 60706-3 1. udgave 2007-02-02 Vedligehold af udstyr Del 3: Verifikation og indsamling, analyse og præsentation af data Maintainability of equipment Part 3: Verification and collection,
Læs mereAkustik Måling af støj fra textilmaskiner Del 1: Generelle krav Tillæg 2
Dansk standard Tillæg DS/EN ISO 9902-1/A2 1. udgave 2014-07-24 Akustik Måling af støj fra textilmaskiner Del 1: Generelle krav Tillæg 2 Textile machinery Noise test code Part 1: Common requirements Amendment
Læs merePackaging Requirements for the use of European Standards in the field of packaging and packaging waste
Dansk standard DS/EN 13427 3. udgave 2006-10-12 Emballage Krav til anvendelsen af europæiske standarder for emballage og emballageaffald Packaging Requirements for the use of European Standards in the
Læs mereRulningslejer Tryklejer Grænsedimensioner,
Dansk standard DS/ISO 104:2015 1. udgave 2015-12-16 Rulningslejer Tryklejer Grænsedimensioner, overordnet plan Rolling bearings Thrust bearings Boundary dimensions, general plan DS/ISO 104:2015 København
Læs mereFacility Management Del 2: Vejledning i udarbejdelse af Facility Management-aftaler
Dansk standard DS/EN 15221-2 2. udgave 2008-06-30 Facility Management Del 2: Vejledning i udarbejdelse af Facility Management-aftaler Facility Management Part 2: Guidance on how to prepare Facility Management
Læs mereKlassifikation og betegnelse af dokumenter for fabriksanlæg, anlæg og udstyr Del 1: Regler og klassifikationstabeller
Dansk standard DS/EN 61355-1 2. udgave 2008-07-04 Klassifikation og betegnelse af dokumenter for fabriksanlæg, anlæg og udstyr Del 1: Regler og klassifikationstabeller Classification and designation of
Læs mereEmballage Glasemballage Dybe BVS-lukninger til ikke-mousserende vine
Dansk standard DS/EN 16293 1. udgave 2013-04-03 Emballage Glasemballage Dybe BVS-lukninger til ikke-mousserende vine Packaging Glass Packaging Deep BVS finishes for still wines DS/EN 16293 København DS
Læs mereHøjspændingskoblingsudstyr Del 102: Højspændingsadskillere og jordsluttere til vekselstrøm
Dansk standard Tillæg DS/EN 62271-102/A2 1. udgave 2013-06-07 Højspændingskoblingsudstyr Del 102: Højspændingsadskillere og jordsluttere til vekselstrøm High-voltage switchgear and controlgear Part 102:
Læs mereSolcelleanlæg Termer, definitioner og symboler
DS-information DS/CLC/TS 61836 1. udgave 2009-06-26 Solcelleanlæg Termer, definitioner og symboler Solar photovoltaic energy systems Terms, definitions and symbols DS/CLC/TS 61836 København DS projekt:
Læs mereGasfyrede tørretumblere af type B med en nominel belastning, der ikke overstiger 20 kw Del 2: Rationel energiudnyttelse
Dansk Standard DS/EN 12752-2 2. udgave 2001-11-09 Gasfyrede tørretumblere af type B med en nominel belastning, der ikke overstiger 20 kw Del 2: Rationel energiudnyttelse Gas-fired tumble dryers of type
Læs mereLedningskanal- og kabelkanalsystemer til elektriske installationer Del 1: Generelle krav
Dansk standard Tillæg DS/EN 50085-1/A1 1. udgave 2013-08-14 Ledningskanal- og kabelkanalsystemer til elektriske installationer Del 1: Generelle krav Cable trunking systems and cable ducting systems for
Læs mereHjælpemidler til personer med funktionsevnenedsættelse Klassifikation og terminologi
Dansk standard DS/EN ISO 9999 6. udgave 2007-12-19 Hjælpemidler til personer med funktionsevnenedsættelse Klassifikation og terminologi Assistive products for persons with disability Classification and
Læs mereGlasfiberarmeret plast Bestemmelse af hårdhed ved hjælp af Barcol-hårdhedsmåler
Dansk standard DS/EN 59:2016 2. udgave 2016-02-26 Glasfiberarmeret plast Bestemmelse af hårdhed ved hjælp af Barcol-hårdhedsmåler Glass reinforced plastics Determination of indentation hardness by means
Læs mereKarakteristikker af DAB-modtagere
Dansk Standard DS/EN 50248 2. udgave 2001-12-11 Karakteristikker af DAB-modtagere Characteristics of DAB receivers DS/EN 50248 København DS projekt: 42051 ICS: 33.160.20 33.160.25 Deskriptorer: lydudsendelse,tv-udsendelse,satellit-udsendelse,digitale
Læs mereKosmetik Mikrobiologi Vurdering af et kosmetikprodukts antimikrobielle beskyttelse
Dansk standard DS/EN ISO 11930 1. udgave 2012-04-25 Kosmetik Mikrobiologi Vurdering af et kosmetikprodukts antimikrobielle beskyttelse Cosmetics Microbiology Evaluation of the antimicrobial protection
Læs mereGrænseflade for digital lysstyring (DALI) Del 208: Særlige krav til kontroludstyr Omskifterfunktion (udstyrstype 7)
Dansk standard DS/EN 62386-208 1. udgave 2009-09-22 Grænseflade for digital lysstyring (DALI) Del 208: Særlige krav til kontroludstyr Omskifterfunktion (udstyrstype 7) Digital addressable lighting Interface
Læs mereMetoder til prøvning af byggesten til murværk Del 21: Bestemmelse af teglog kalksandstens vandabsorption ved hjælp af absorption med koldt vand
Dansk standard DS/EN 772-21 1. udgave 2011-06-27 Metoder til prøvning af byggesten til murværk Del 21: Bestemmelse af teglog kalksandstens vandabsorption ved hjælp af absorption med koldt vand Methods
Læs mereMøbler Barnesenge og foldbare barnesenge til privat brug Del 1: Sikkerhedskrav
Dansk standard DS/EN 716-1 3. udgave 2008-10-09 Møbler Barnesenge og foldbare barnesenge til privat brug Del 1: Sikkerhedskrav Furniture Children's cots and folding cots for domestic use Part 1: Safety
Læs mereKvalitetsledelsessystemer Krav
Dansk standard DS/EN ISO 9001 4. udgave 2008-12-09 Kvalitetsledelsessystemer Krav Quality management systems Requirements DS/EN ISO 9001 København DS projekt: M220000 ICS: 03.120.10 Første del af denne
Læs mere