Hånd-arm-vibrationer Retningslinjer for vibrationsdæmpning Del 2: Foranstaltninger ved arbejdspladsen
|
|
- Karl Johannsen
- 6 år siden
- Visninger:
Transkript
1 DS-information DS/CEN/TR : udgave Hånd-arm-vibrationer Retningslinjer for vibrationsdæmpning Del 2: Foranstaltninger ved arbejdspladsen Hand-arm vibration Guidelines for vibration hazards reduction Part 2: Management measures at the workplace
2 DS/CEN/TR :2016 København DS projekt: M ICS: Første del af denne publikations betegnelse er: DS/CEN/TR, hvilket betyder, at det er en europæisk teknisk rapport, der har status som DS-information. Denne publikations overensstemmelse er: IDT med: CEN/TR :2016. DS-publikationen er på engelsk. Denne publikation erstatter: DS/CEN/CR :1998. DS-publikationstyper Dansk Standard udgiver forskellige publikationstyper. Typen på denne publikation fremgår af forsiden. Der kan være tale om: Dansk standard standard, der er udarbejdet på nationalt niveau, eller som er baseret på et andet lands nationale standard, eller standard, der er udarbejdet på internationalt og/eller europæisk niveau, og som har fået status som dansk standard DS-information publikation, der er udarbejdet på nationalt niveau, og som ikke har opnået status som standard, eller publikation, der er udarbejdet på internationalt og/eller europæisk niveau, og som ikke har fået status som standard, fx en teknisk rapport, eller europæisk præstandard DS-håndbog samling af standarder, eventuelt suppleret med informativt materiale DS-hæfte publikation med informativt materiale Til disse publikationstyper kan endvidere udgives tillæg og rettelsesblade DS-publikationsform Publikationstyperne udgives i forskellig form som henholdsvis fuldtekstpublikation (publikationen er trykt i sin helhed) godkendelsesblad (publikationen leveres i kopi med et trykt DS-omslag) elektronisk (publikationen leveres på et elektronisk medie) DS-betegnelse Alle DS-publikationers betegnelse begynder med DS efterfulgt af et eller flere præfikser og et nr., fx DS 383, DS/EN 5414 osv. Hvis der efter nr. er angivet et A eller Cor, betyder det, enten at det er et tillæg eller et rettelsesblad til hovedstandarden, eller at det er indført i hovedstandarden. DS-betegnelse angives på forsiden. Overensstemmelse med anden publikation: Overensstemmelse kan enten være IDT, EQV, NEQ eller MOD IDT: Når publikationen er identisk med en given publikation. EQV: Når publikationen teknisk er i overensstemmelse med en given publikation, men præsentationen er ændret. NEQ: Når publikationen teknisk eller præsentationsmæssigt ikke er i overensstemmelse med en given standard, men udarbejdet på baggrund af denne. MOD: Når publikationen er modificeret i forhold til en given publikation.
3 TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR May 2016 ICS Supersedes CR :1995 English Version Hand-arm vibration - Guidelines for vibration hazards reduction - Part 2: Management measures at the workplace Vibrations main-bras - Guide pour la réduction des risques de vibrations - Mesures de prévention sur le lieu de travail Hand-Arm-Schwingungen - Leitfaden zur Verringerung der Gefährdung durch Schwingungen - Teil 2: Organisatorische Maßnahmen am Arbeitsplatz This Technical Report was approved by CEN on 8 February It has been drawn up by the Technical Committee CEN/TC 231. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN/TR :2016 E
4 Contents Page European foreword... 5 Introduction Scope Normative references Terms and definitions Identification of main sources of hand-arm vibration at work Vibration reduction by task, product and process re-design General Vibration reduction by work task re-design Vibration reduction measures by product re-design Vibration reduction by process re-design How to select low-vibration machinery, anti-vibration systems and auxiliary equipment Selection of low-vibration machinery General Questions that potential buyers should ask Declared vibration values Selection of anti-vibration systems and auxiliary equipment Minimizing or avoiding vibration from hand-fed machines Anti-vibration handles Auxiliary equipment for the reduction of vibration exposure Use of resilient materials Reduction of forces exerted by operators Personal protection Management measures for the control of hand-arm vibration exposure Vibration reduction strategy General Vibration source analysis Overview of the most important steps in the management process Quality control of manufacturing processes Maintenance of tools and equipment Training and information for workers Consultation and participation of workers Reducing the period of exposure Health surveillance Annex A (informative) Most common machines and processes which expose people to hand-arm vibration: Groups and list of hand-guided machinery A.1 Tools by industry A.2 Tools by function Annex B (informative) An example checklist of protective measures against vibration
5 Annex C (informative) Vibration reduction measures by modifying the design of the product Practical examples C.1 General C.2 Metal working C.3 Construction Annex D (informative) Practical examples of vibration reduction measures by changing the process used to manufacture a product D.1 Design specification D.2 Improving productivity D.3 Examples at roadway maintenance, demolition of concrete structures, pipelines D.4 Examples at foundries, e.g. fettling castings, polishing, automation, auxiliary equipment D.5 Equipment primarily used in construction Annex E (informative) Vibration reduction by selection of machinery or equipment E.1 Information to be provided by manufacturers E.2 Declaration of vibration emissions and test-codes E.3 Using manufacturers emission values E.4 Example data measured at workplaces E.5 Examples Annex F (informative) Getting information from manufacturers and suppliers Important questions that potential buyers should ask potential suppliers with regard to handarm vibration F.1 General information F.2 Important questions to consider in the buying process Annex G (informative) Practical maintenance measures that should be taken to reduce vibration exposure G.1 General G.2 Machines/power tools G.3 Tool consumables Annex H (informative) Reliable definition of action and exposure limit values Consideration of the precision of definition Annex I (informative) Additional information about tool characteristics and work tasks for the tools listed in Figure Bibliography
6 Figures Figure 1 Minimization of risks from exposure to hand-arm vibration... 7 Figure 2 Examples of vibration magnitudes for common tools, given as total acceleration values a hv measured along the 3 axes under real conditions (2005 to 2014) Figure 3 Good practice to use different information sources including aspects of uncertainty Figure F.1 Examples of vibration emission declarations Tables Table A.1 List of tools by function Table B.1 General guidance for employers on the selection of protective measures Table F.1 Questions in the buying process of machines Table H.1 Source and quality of acquired data on vibration emission or vibration exposure Table H.2 Determining the extended uncertainty K for estimation based upon the emission and exposure values in the absence of other data Table I.1 Tools used in construction work Table I.2 Tools used in landscaping and gardening Table I.3 Tools used in wood working Table I.4 Tools used in metal working
7 European foreword This document (CEN/TR :2016) has been prepared by Technical Committee CEN/TC 231 Mechanical vibration and shock, the secretariat of which is held by DIN. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes CR :1995. The present series CR 1030 / CEN/TR 1030 is composed with the following parts: CR , Hand-arm vibration Guidelines for vibration hazards reduction Part 1: Engineering methods by design of machinery; CEN/TR , Hand-arm vibration Guidelines for vibration hazards reduction Part 2: Management measures at the workplace. 5
8 Introduction The habitual and prolonged use of machinery which transmits vibration to the hand can cause disorders of the upper limbs. European legislation especially the Physical Agents Directive 2002/44/EC (Vibrations at work) requires that employers assess and take measures to prevent or reduce workplace risks to the health and safety of their employees. The basic strategy to be adopted is defined in the European legislation including the Directive 2002/44/EC and described in the Non-binding guide to good practice for implementing Directive 2002/44/EC (Vibrations at work), Part I Guide to good practice on hand-arm vibration, which is addressed to the European Member States. It covers the following areas of measures: a) assessment of risks; b) identification of necessary preventative and/or protective measures; c) organization for the effective implementation of preventative and protective measures; d) implementation of an adequate programme of measures to prevent or reduce risks. This revised Technical Report CEN/TR (first edition was published as CR in 1995) primarily provides additional information and examples to the European Guide to good practice on hand-arm vibration (Part I of the Non-binding guide to good practice for implementing Directive 2002/44/EC (Vibrations at work)). This Technical Report CEN/TR provides additional information for Member States health and safety authorities or labour authorities as well as managers, health and safety officers, engineers, planning and purchasing staff and others on further aspects of vibration effect reduction and control, which supports the practical implementation of the requirements of the Physical Agents Directive 2002/44/EC (Vibrations at work). Effective protection against vibration generally requires a combination of measures which can be categorized as technical measures and management measures; see Figure 1. 6
9 Figure 1 Minimization of risks from exposure to hand-arm vibration 7
10 1 Scope This Technical Report outlines practicable measures for the reduction and control of health hazards associated with exposure to hand-arm vibration at work. It supplements the European Guide to good practice on hand-arm vibration and provides a practical professional aid for Member States health and safety authorities or labour authorities who write national guidance for managers, health and safety officers, engineers, planning and purchasing staff and others. This Technical Report covers the following principal aspects: a) identification of main sources of hand-arm vibration at work; b) vibration reduction by re-considering task, product, process and design; c) how to select low-vibration machinery, including vibration reducing features, auxiliary equipment for control of vibration; d) other issues, e.g. personal protection and its limitation; e) management measures for the control of hand-arm vibration exposure; f) health surveillance. 2 Normative references The following documents, in whole or in part, are referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. CR , Hand-arm vibration Guidelines for vibration hazards reduction Part 1: Engineering methods by design of machinery EN 12096, Mechanical vibration - Declaration and verification of vibration emission values CEN/TR 15350:2013, Mechanical vibration - Guideline for the assessment of exposure to handtransmitted vibration using available information including that provided by manufacturers of machinery EN ISO :2001, Mechanical vibration - Measurement and evaluation of human exposure to handtransmitted vibration - Part 1: General requirements (ISO :2001) EN ISO , Mechanical vibration - Measurement and evaluation of human exposure to handtransmitted vibration - Part 2: Practical guidance for measurement at the workplace (ISO ) ISO 2041, Mechanical vibration, shock and condition monitoring Vocabulary ISO 5805, Mechanical vibration and shock Human exposure Vocabulary 3 Terms and definitions For the purpose of this document, the terms and definitions given in EN ISO , ISO 2041 and ISO 5805 apply. 8
Dansk standard DS/EN ISO udgave Campingtelte. Camping tents
Dansk standard DS/EN ISO 5912 2. udgave 2011-11-22 Campingtelte Camping tents DS/EN ISO 5912 København DS projekt: M245636 ICS: 97.200.30 Første del af denne publikations betegnelse er: DS/EN ISO, hvilket
Læs mereTekniske specifikationer for centrifugalpumper Klasse III
Dansk standard Tillæg DS/EN ISO 9908/A1 1. udgave 2011-06-08 Tekniske specifikationer for centrifugalpumper Klasse III Technical specifications for centrifugal pumps Class III Amendment 1 DS/EN ISO 9908/A1
Læs mereMaintenance Documentation for maintenance
Dansk standard DS/EN 13460 3. udgave 2009-12-15 Vedligehold Dokumentation for vedligehold Maintenance Documentation for maintenance DS/EN 13460 København DS projekt: M245239 ICS: 01.110; 21.020 Første
Læs mereKosmetik Metoder til prøvning af solbeskyttelse In vivo-bestemmelse af UVA-beskyttelse
Dansk standard DS/EN ISO 24442 1. udgave 2012-02-01 Kosmetik Metoder til prøvning af solbeskyttelse In vivo-bestemmelse af UVA-beskyttelse Cosmetics Sun protection test methods In vivo determination of
Læs merePapir og karton Bestemmelse af tykkelse, densitet og massevolumen
Dansk standard DS/EN ISO 534 1. udgave 2012-01-04 Papir og karton Bestemmelse af tykkelse, densitet og massevolumen Paper and board Determination of thickness, density and specific volume DS/EN ISO 534
Læs merePulvermaling Del 7: Bestemmelse af massetab efter ophedning i ovn
Dansk standard DS/EN ISO 8130-7 1. udgave 2011-01-21 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 8130-7:2011 Pulvermaling Del 7: Bestemmelse af massetab efter ophedning
Læs mereMajs Bestemmelse af vandindhold (i forarbejdet korn og i hele korn)
Dansk standard DS/EN ISO 6540 1. udgave 2010-06-23 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 6540:2010 Majs Bestemmelse af vandindhold (i forarbejdet korn og i hele
Læs merePlast Bestemmelse af termoplasts massesmelteindeks (MFR) og volumensmelteindeks (MVR) Del 1: Standardmetode
Dansk standard DS/EN ISO 1133-1 1. udgave 2012-01-25 Plast Bestemmelse af termoplasts massesmelteindeks (MFR) og volumensmelteindeks (MVR) Del 1: Standardmetode Plastics Determination of the melt mass-flow
Læs mereKrydderier og smagsstoffer Botanisk nomenklatur
Dansk standard DS/EN ISO 676 1. udgave 2009-07-23 Krydderier og smagsstoffer Botanisk nomenklatur Spices and condiments Botanical nomenclature DS/EN ISO 676 København DS projekt: M230052 ICS: 01.040.67;
Læs mereDansk standard DS/EN Risk management Risk assessment techniques. 1. udgave
Dansk standard DS/EN 31010 1. udgave 2010-05-20 Risikoledelse Teknikker til risikovurdering Risk management Risk assessment techniques DS/EN 31010 København DS projekt: M231261 ICS: 03.100.01 Første del
Læs mereSolcelleanlæg Termer, definitioner og symboler
DS-information DS/CLC/TS 61836 1. udgave 2009-06-26 Solcelleanlæg Termer, definitioner og symboler Solar photovoltaic energy systems Terms, definitions and symbols DS/CLC/TS 61836 København DS projekt:
Læs merePalmeolie Bestemmelse af indeks for forringelse af blegningsevne (DOBI) samt bestemmelse af karotinindhold
Dansk standard DS/EN ISO 17932 2. udgave 2011-11-07 Palmeolie Bestemmelse af indeks for forringelse af blegningsevne (DOBI) samt bestemmelse af karotinindhold Palm oil Determination of the deterioration
Læs mereMiljøledelsessystemer Kravbeskrivelse med råd om anvendelse
Dansk standard DS/EN ISO 14001 2. udgave 2004-11-30 Miljøledelsessystemer Kravbeskrivelse med råd om anvendelse Environmental management systems Requirements with guidance for use DS/EN ISO 14001 København
Læs mereMaskinsikkerhed Elektrisk udstyr på maskiner Del 1: Generelle krav
Dansk standard Tillæg DS/EN 60204-1/A1 1. udgave 2009-03-13 Maskinsikkerhed Elektrisk udstyr på maskiner Del 1: Generelle krav Safety of machinery Electrical equipment of machines Part 1: General requirements
Læs mereDansk standard DS/EN Loft ladders Requirements, marking and testing. 1. udgave
Dansk standard DS/EN 14975 1. udgave 2007-02-26 Loftstiger Krav, mærkning og prøvning Loft ladders Requirements, marking and testing DS/EN 14975 København DS projekt: 55746 ICS: 97.145 Første del af denne
Læs mereCold rolled narrow steel strip Tolerances on dimensions and shape
Dansk standard DS/EN 10140 3. udgave 2009-06-02 Koldvalset båndstål Tolerancer for dimensioner og form Cold rolled narrow steel strip Tolerances on dimensions and shape DS/EN 10140 København DS projekt:
Læs mereTeknisk tegning Flowdiagrammer til procesanlæg Generelle regler
Dansk Standard DS/EN ISO 10628 1. udgave Godkendelsesblad Godkendt:2001-04-06 Teknisk tegning Flowdiagrammer til procesanlæg Generelle regler Flow diagrams for process plants General rules DANSK STANDARD
Læs mereGeometriske produktspecifikationer (GPS) Længdemåleudstyr højdemålere Design og metrologiske karakteristika
Dansk standard DS/EN ISO 13225 1. udgave 2012-05-23 Geometriske produktspecifikationer (GPS) Længdemåleudstyr højdemålere Design og metrologiske karakteristika Geometrical product specifications (GPS)
Læs mereCentrale strømforsyningssystemer
Dansk Standard DS/EN 50171 1. udgave 2001-08-29 Centrale strømforsyningssystemer Central power supply systems DS/EN 50171 København DS projekt: 30769 ICS: 29.200 Deskriptorer: belysning til nødudgang,elektriske
Læs mereGødning Betegnelser og specifikationer
DS-information DS/CEN/CR 12949 1. udgave 2003-12-19 Gødning Betegnelser og specifikationer Fertilizers Denominations and specifications DS/CEN/CR 12949 København DS projekt: 34104 ICS: 65.080 Deskriptorer:
Læs mereFacility Management Del 2: Vejledning i udarbejdelse af Facility Management-aftaler
Dansk standard DS/EN 15221-2 2. udgave 2008-06-30 Facility Management Del 2: Vejledning i udarbejdelse af Facility Management-aftaler Facility Management Part 2: Guidance on how to prepare Facility Management
Læs mereMalinger og lakker Belysning og procedure for visuel vurdering af belægninger
Dansk standard DS/EN ISO 13076 1. udgave 2012-08-10 Malinger og lakker Belysning og procedure for visuel vurdering af belægninger Paints and varnishes Lighting and procedure for visual assessments of coatings
Læs mereKontormøbler Kontorstole Del 4: Klarificering af EN :2000 (Dimensioner)
DS-information DS/CEN/TR 1335-4 1. udgave 2009-11-06 Kontormøbler Kontorstole Del 4: Klarificering af EN 1335-1:2000 (Dimensioner) Office furniture Office work chair Part 4: Clarifications to EN 1335-1:2000
Læs mereIkke-destruktiv prøvning Penetrantog magnetpulverprøvning ved brug af blåt lys
DS-information DS/CEN/TR 16638 1. udgave 2014-02-26 Ikke-destruktiv prøvning Penetrantog magnetpulverprøvning ved brug af blåt lys Non-destructive testing Penetrant and magnetic particle testing using
Læs mereFritidsbåde Komfurer til flydende brændsel
Dansk standard DS/EN ISO 14895 1. udgave 2003-04-11 Fritidsbåde Komfurer til flydende brændsel Small craft Liquid-fuelled galley stoves DS/EN ISO 14895 København DS projekt: 47074 ICS: 47.080 Deskriptorer:
Læs mereSlanger og rør af gummi og plast Måling af fleksibilitet og stivhed Del 2: Bøjeprøvning ved lavere temperaturer end rumtemperatur
Dansk standard DS/EN ISO 10619-2 1. udgave 2012-01-24 Slanger og rør af gummi og plast Måling af fleksibilitet og stivhed Del 2: Bøjeprøvning ved lavere temperaturer end rumtemperatur Rubber and plastics
Læs merePackaging Flexible plastic/metal laminate tubes Dimensions and tolerances of nozzle S 13
Dansk standard DS/EN 14979 1. udgave 2006-03-31 Emballage Fleksible laminattuber af plast/metal Dimensioner og tolerancer for dyse S 13 Packaging Flexible plastic/metal laminate tubes Dimensions and tolerances
Læs mereIkke-destruktiv prøvning Lækprøvning Kriterier for valg af metode og teknik
Dansk Standard DS/EN 1779 2. udgave 2001-10-26 Ikke-destruktiv prøvning Lækprøvning Kriterier for valg af metode og teknik Non-destructive testing Leak testing Criteria for method and technique selection
Læs mereVejbelysning Del 1: Valg af belysningsklasser
DS-information DS/CEN/TR 13201-1 1. udgave 2004-09-30 Vejbelysning Del 1: Valg af belysningsklasser Road lighting Part 1: Selection of lighting classes DS/CEN/TR 13201-1 København DS projekt: 37553 ICS:
Læs mereDansk standard DS/EN Weibull analysis. 1. udgave
Dansk standard DS/EN 61649 1. udgave 2008-12-10 Weilbull-analyse Weibull analysis DS/EN 61649 København DS projekt: M219606 ICS: 03.120.30 Første del af denne publikations betegnelse er: DS/EN, hvilket
Læs mereBordtennis Del 2: Netstolper Krav og prøvningsmetoder
Dansk standard DS/EN 14468-2:2015 2. udgave 2015-04-29 Bordtennis Del 2: Netstolper Krav og prøvningsmetoder Table tennis Part 2: Posts for net assemblies Requirements and test methods DS/EN 14468-2:2015
Læs mereLampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler
Dansk standard Tillæg DS/EN 60061-1/A41 (elektronisk) 1. udgave 2010-06-24 Lampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler Lamp caps and holders together
Læs merePrøvningsmetoder til hjælpekomponenter til murværk Del 4: Bestemmelse af lastkapacitet og lastnedbøjning i bjælkesko
Dansk standard DS/EN 846-4 + A1 2. udgave 2002-12-04 Prøvningsmetoder til hjælpekomponenter til murværk Del 4: Bestemmelse af lastkapacitet og lastnedbøjning i bjælkesko Methods of test for ancillary components
Læs mereLegepladsredskaber og -underlag Del 11: Tredimensionelle klatrenet Supplerende specifikke sikkerhedskrav og prøvningsmetoder
Dansk standard DS/EN 1176-11 2. udgave 2009-04-22 Legepladsredskaber og -underlag Del 11: Tredimensionelle klatrenet Supplerende specifikke sikkerhedskrav og prøvningsmetoder Playground equipment and surfacing
Læs mereRotordynamiske pumper Godkendelsesprøvning af hydraulisk ydeevne Klasse 1, 2 og 3
Dansk standard DS/EN ISO 9906 2. udgave 2012-06-08 Rotordynamiske pumper Godkendelsesprøvning af hydraulisk ydeevne Klasse 1, 2 og 3 Rotodynamic pumps Hydraulic performance acceptance tests Grades 1, 2
Læs mereRoterende elektriske maskiner Del 20-1: Reguleringsmotorer Stepmotorer
DS-information DS/CLC/TS 60034-20-1 1. udgave 2004-10-08 Roterende elektriske maskiner Del 20-1: Reguleringsmotorer Stepmotorer Rotating electrical machines Part 20-1: Control motors - Stepping motors
Læs mereBatchstyring Del 1: Modeller og terminologi
Dansk Standard DS/EN 61512-1 1. udgave 2001-08-29 Batchstyring Del 1: Modeller og terminologi Batch control Part 1: Models and terminology DS/EN 61512-1 København DS projekt: 26009 ICS: 25.040.40 Deskriptorer:
Læs mereElektrostatik Del 4-1: Standardprøvningsmetoder. anvendelser Gulvbelægningers og monterede gulves elektrostatiske egenskaber
Dansk standard Tillæg DS/EN 61340-4-1:2004/A1:2015 1. udgave 2015-06-23 Elektrostatik Del 4-1: Standardprøvningsmetoder for specifikke anvendelser Gulvbelægningers og monterede gulves elektrostatiske egenskaber
Læs mereDansk standard DS/EN 13429. Packaging Reuse. 3. udgave 2006-10-12
Dansk standard DS/EN 13429 3. udgave 2006-10-12 Emballage Genbrug Packaging Reuse DS/EN 13429 København DS projekt: M215981 ICS: 13.030.50; 55.020 Første del af denne publikations betegnelse er: DS/EN,
Læs mereLampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler
Dansk standard Tillæg DS/EN 60061-1/A47 (elektronisk) 1. udgave 2012-04-23 Lampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler Lamp caps and holders together
Læs mereAkustik Deklarering og verificering af støj fra maskiner og udstyr
Dansk standard DS/EN ISO 4871 2. udgave 2009-09-09 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 4871:2009 Akustik Deklarering og verificering af støj fra maskiner og udstyr
Læs mereTemperature Electromotive force (EMF) tables for pure-element thermocouple combinations
Dansk standard DS/EN 62460 1. udgave 2008-10-14 Temperatur Elektromotorisk kraft (EMF) Tabeller for kombinationer af rene termoelementer Temperature Electromotive force (EMF) tables for pure-element thermocouple
Læs mereVinduer og døre Vandtæthed Klassifikation
Dansk Standard DS/EN 12208 1. udgave Godkendt:2000-12-29 Vinduer og døre Vandtæthed Klassifikation Windows and doors Watertightness Classification DANSK STANDARD - Eftertryk uden tilladelse forbudt Kollegievej
Læs mereCOPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION
DS-information DS/CEN/TR 14715 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION Maskinsikkerhed Ioniserende stråling udsendt fra maskiner Vejledning til anvendelse af tekniske standarder
Læs mereMaskinsikkerhed Risikovurdering Del 2: Praktisk vejledning og metodeeksempler
DS-information DS/ISO/TR 14121-2 2. udgave 2012-07-04 Maskinsikkerhed Risikovurdering Del 2: Praktisk vejledning og metodeeksempler Safety of machinery Risk assessment Part 2: Practical guidance and examples
Læs mereDS-information DS/CEN/TS 14159
DS-information DS/CEN/TS 14159 2. udgave 2007-06-18 Textilgulvbelægninger Krav til tolerancer for (lineære) dimensioner for tæpper, løbere, tæppefliser, væg til væg-tæpper og til tolerancer for mønsterrapporter
Læs mereWc-kummer og wc-møbler Tilslutningsdimensioner
Dansk standard DS/EN 33 3. udgave 2011-10-03 Wc-kummer og wc-møbler Tilslutningsdimensioner WC pans and WC suites Connecting dimensions DS/EN 33 København DS projekt: M235262 ICS: 91.140.70 Første del
Læs mereEurocode 1: Last på bærende konstruktioner Del 1-3: Generelle laster Snelast
Dansk standard DS/EN 1991-1-3 2. udgave 2007-06-22 Eurocode 1: Last på bærende konstruktioner Del 1-3: Generelle laster Snelast Eurocode 1 Actions on structures Part 1-3: General actions - Snow loads DS/EN
Læs mereJernbaner Spor Undersøgelse af den geometriske sporkvalitet
DS-information DS/CEN/TR 16513 1. udgave 2014-05-05 Jernbaner Spor Undersøgelse af den geometriske sporkvalitet Railway applications Track Survey of track geometry quality DS/CEN/TR 16513 København DS
Læs mereControl technology Rules for the designation of measuring instruments
Dansk standard DS/EN 62419 1. udgave 2009-03-10 Styringsteknologi Regler for benævnelse af måleinstrumenter Control technology Rules for the designation of measuring instruments DS/EN 62419 København DS
Læs mereRoterende elektriske maskiner Del 17: Kortslutningsmotorer, der forsynes fra konvertere Vejledning i anvendelse
DS-information DS/CLC/TS 60034-17 1. udgave 2004-10-08 Roterende elektriske maskiner Del 17: Kortslutningsmotorer, der forsynes fra konvertere Vejledning i anvendelse Rotating electrical machines Part
Læs mereLedelse af pålidelighedsaktiviteter Del 3-11: Anvendelsesvejledning Pålidelighedscentreret vedligehold (RCM)
Dansk standard DS/EN 60300-3-11 1. udgave 2009-12-10 Ledelse af pålidelighedsaktiviteter Del 3-11: Anvendelsesvejledning Pålidelighedscentreret vedligehold (RCM) Dependability management Part 3-11: Application
Læs mereSkovbrugs- og havebrugsmaskiner Vibrationsprøvning af bærbare håndholdte maskiner med forbrændingsmotor Vibrationer ved håndtagene
Dansk standard DS/EN ISO 22867 3. udgave 2012-01-25 Skovbrugs- og havebrugsmaskiner Vibrationsprøvning af bærbare håndholdte maskiner med forbrændingsmotor Vibrationer ved håndtagene Forestry and gardening
Læs mereStyring af rumfartsprojekter. Generelle krav. Del 1: Politik og principper
Dansk Standard DS/EN 13290-1 1. udgave Godkendt:2000-04-13 Styring af rumfartsprojekter. Generelle krav. Del 1: Politik og principper Space project management - General requirements - Part 1: Policy and
Læs mereKøkkengrej Grafiske symboler (piktogrammer)
Dansk standard DS/EN 14916 1. udgave 2005-11-14 Køkkengrej Grafiske symboler (piktogrammer) Domestic cookware Graphical symbols (pictograms) DS/EN 14916 København DS projekt: 55114 ICS: 01.080.20; 97.040.60
Læs mereMobil og bærbar DVB-T/H-radiotilslutning Del 2: Grænsefladeoverensstemmelsesprøvning
Dansk standard DS/EN 62002-2 1. udgave 2006-12-12 Mobil og bærbar DVB-T/H-radiotilslutning Del 2: Grænsefladeoverensstemmelsesprøvning Mobile and portable DVB-T/H radio access Part 2: Interface conformance
Læs mereSteel castings Austenitic manganese steel castings
Dansk standard DS/EN 10349 1. udgave 2009-11-05 Stålstøbegods Austenitisk manganstålstøbegods Steel castings Austenitic manganese steel castings DS/EN 10349 København DS projekt: M220956 ICS: 77.140.80
Læs mereKapslingsklasser (IP-kode)
Dansk Standard DS/EN 60529+A1 1. udgave 2002-04-05 Kapslingsklasser (IP-kode) Degrees of protection provided by enclosures (IP Code) DS/EN 60529+A1 København DS projekt: 47050 ICS: 29.020 Deskriptorer:
Læs mereGrænseflade for digital lyd Del 1: Generelt
Dansk standard DS/EN 60958-1 3. udgave 2008-10-31 Grænseflade for digital lyd Del 1: Generelt Digital audio interface Part 1: General DS/EN 60958-1 København DS projekt: M222433 ICS: 33.160.30 Første del
Læs mereAluminium og aluminiumlegeringer Mekaniske egenskaber ved Al-Silegeringer til højtryksstøbning, lavtryksstøbning og kokillestøbning
DS-information DS/CEN/TR 16748:2014 1. udgave 2014-12-10 Aluminium og aluminiumlegeringer Mekaniske egenskaber ved Al-Silegeringer til højtryksstøbning, lavtryksstøbning og kokillestøbning Aluminium and
Læs mereStål Klassifikation af stål Eksempler på klassifikation i forhold til europæiske standarder
Dansk Standard DS/CEN/CR 10313 1. udgave 2001-07-10 Stål Klassifikation af stål Eksempler på klassifikation i forhold til europæiske standarder Classification of grades of steel Examples of classification
Læs mereAkustik Støjreduktion Kabiner Laboratorie- og in situ-målinger
Dansk standard DS/EN ISO 11957 2. udgave 2009-09-22 Akustik Støjreduktion Kabiner Laboratorie- og in situ-målinger Acoustics Determination of sound insulation performance of cabins Laboratory and in situ
Læs mereGlasfiberarmeret plast Bestemmelse af hårdhed ved hjælp af Barcol-hårdhedsmåler
Dansk standard DS/EN 59:2016 2. udgave 2016-02-26 Glasfiberarmeret plast Bestemmelse af hårdhed ved hjælp af Barcol-hårdhedsmåler Glass reinforced plastics Determination of indentation hardness by means
Læs mereGrænseflade for digital lyd Del 1: Generelt
Dansk standard Tillæg DS/EN 60958-1/A1 1. udgave 2014-09-02 Grænseflade for digital lyd Del 1: Generelt Digital audio interface Part 1: General DS/EN 60958-1/A1 København DS projekt: M277911 ICS: 33.160.30
Læs mereTilsatsmaterialer til svejsning Pulverfyldte elektroder til metallysbuesvejsning
Dansk standard DS/EN ISO 12153 1. udgave 2012-06-08 Tilsatsmaterialer til svejsning Pulverfyldte elektroder til metallysbuesvejsning med eller uden beskyttelsesgas af nikkel og nikkellegeringer Klassifikation
Læs mereMultimedia quality Method of assessment of synchronization of audio and video
Dansk standard DS/EN 62503 1. udgave 2008-10-31 Multimediekvalitet Metode til fastsættelse af synkronisering mellem lyd og billede Multimedia quality Method of assessment of synchronization of audio and
Læs mereIndustrielle kommunikationsnetværk Fieldbusspecifikationer Del 1: Oversigt og vejledning for IEC og IEC serierne
DS-information DS/CLC/TR 61158-1 2. udgave 2009-02-23 Industrielle kommunikationsnetværk Fieldbusspecifikationer Del 1: Oversigt og vejledning for IEC 61158- og IEC 61784-serierne Industrial communication
Læs mereKontormøbler Kontorstole Del 1: Mål Bestemmelse af dimensioner
Dansk Standard DS/EN 1335-1 2. udgave Godkendt: 2001-02-21 Kontormøbler Kontorstole Del 1: Mål Bestemmelse af dimensioner Office furniture Office work chair Part 1: Dimensions Determination of dimensions
Læs mereFaste modstande til brug i elektronisk udstyr Del 1: Generisk specifikation
Dansk standard Tillæg DS/EN 60115-1:2011/ A11:2015 1. udgave 2015-05-18 Faste modstande til brug i elektronisk udstyr Del 1: Generisk specifikation Fixed resistors for use in electronic equipment Part
Læs mereAustenitiske, austenitisk-ferritiske og ferritiske langssvejste rustfrie stålrør til fødevareindustri og kemisk industri
Dansk standard DS/EN 10357 1. udgave 2014-01-09 Austenitiske, austenitisk-ferritiske og ferritiske langssvejste rustfrie stålrør til fødevareindustri og kemisk industri Austenitic, austenitic-ferritic
Læs mereSpecifikation og kvalificering af svejseprocedurer for metalliske materialer Kvalificering ved godkendelse af en standardsvejseprocedure
Dansk standard DS/EN ISO 15612 2. udgave 2005-12-22 Specifikation og kvalificering af svejseprocedurer for metalliske materialer Kvalificering ved godkendelse af en standardsvejseprocedure Specification
Læs mereJern og stål Europæiske standarder for bestemmelse af kemisk sammensætning
DS-information DS/CEN/TR 10261 2. udgave 2013-03-13 Jern og stål Europæiske standarder for bestemmelse af kemisk sammensætning Iron and steel European standards for the determination of chemical composition
Læs mereStearinlys Produktsikkerhedsmærkning
Dansk standard DS/EN 15494 1. udgave 2007-11-12 Stearinlys Produktsikkerhedsmærkning Candles Product safety labels DS/EN 15494 København DS projekt: M212730 ICS: 13.120; 97.180 Første del af denne publikations
Læs mereTrækonstruktioner Bestemmelse af dyblers brudmoment
Dansk standard DS/EN 409 2. udgave 2009-06-24 Trækonstruktioner Bestemmelse af dyblers brudmoment Timber structures Test methods Determination of the yield moment of dowel type fasteners DS/EN 409 København
Læs mereUdstyr til tilslutning af belysningsarmaturer til husholdningsbrug o.l. Del 2: Normblade for DCL
Dansk standard DS/EN 61995-2 1. udgave 2009-06-10 Udstyr til tilslutning af belysningsarmaturer til husholdningsbrug o.l. Del 2: Normblade for DCL Devices for the connection of luminaires for household
Læs mereKlassifikation og betegnelse af dokumenter for fabriksanlæg, anlæg og udstyr Del 1: Regler og klassifikationstabeller
Dansk standard DS/EN 61355-1 2. udgave 2008-07-04 Klassifikation og betegnelse af dokumenter for fabriksanlæg, anlæg og udstyr Del 1: Regler og klassifikationstabeller Classification and designation of
Læs mereAudioudstyr og audiovisuelt udstyr Digitale audiodele Grundlæggende metoder til måling af audiokarakteristika Del 3: Professionel brug
Dansk standard DS/EN 61606-3 1. udgave 2008-12-12 Audioudstyr og audiovisuelt udstyr Digitale audiodele Grundlæggende metoder til måling af audiokarakteristika Del 3: Professionel brug Audio and audiovisual
Læs mereBæredygtighed inden for byggeri og anlæg Miljøvaredeklarationer (EPD) Kommunikationsformat: business-tobusiness
Dansk standard DS/EN 15942 1. udgave 2011-10-28 Bæredygtighed inden for byggeri og anlæg Miljøvaredeklarationer (EPD) Kommunikationsformat: business-tobusiness (B2B) Sustainability of construction works
Læs mereGødning Ekstraktion af vandopløseligt calcium, magnesium, natrium og svovl i form af sulfat
Dansk standard DS/EN 15961 1. udgave 2012-01-06 Gødning Ekstraktion af vandopløseligt calcium, magnesium, natrium og svovl i form af sulfat Fertilizers Extraction of water-soluble calcium, magnesium, sodium
Læs mereElproducerende vindmøller Del 25-3: Kommunikationssystemer til overvågning og styring af vindmølleparker Modeller for informationsudveksling
Dansk standard DS/EN 61400-25-3 1. udgave 2007-04-27 Elproducerende vindmøller Del 25-3: Kommunikationssystemer til overvågning og styring af vindmølleparker Modeller for informationsudveksling Wind turbines
Læs merePackaging Requirements for the use of European Standards in the field of packaging and packaging waste
Dansk standard DS/EN 13427 3. udgave 2006-10-12 Emballage Krav til anvendelsen af europæiske standarder for emballage og emballageaffald Packaging Requirements for the use of European Standards in the
Læs mereAlarmsystemer Tryghedsalarmsystemer Del 5: Sammenkoblingsstik og kommunikation
Dansk standard DS/EN 50134-5 1. udgave 2004-12-03 Alarmsystemer Tryghedsalarmsystemer Del 5: Sammenkoblingsstik og kommunikation Alarm systems Social alarm systems Part 5: Interconnections and communications
Læs mereIntegration af virksomhedens styringssystem Del 1: Modeller og terminologi
Dansk standard DS/EN 62264-1 1. udgave 2008-02-01 Integration af virksomhedens styringssystem Del 1: Modeller og terminologi Enterprise-control system integration DS/EN 62264-1 København DS projekt: M222179
Læs mereAluminium og aluminiumlegeringer Rondeller og rondelmaterialer til produktion af køkkenredskaber Specifikationer
Dansk standard DS/EN 851 2. udgave 2014-07-14 Aluminium og aluminiumlegeringer Rondeller og rondelmaterialer til produktion af køkkenredskaber Specifikationer Aluminium and aluminium alloys Circle and
Læs mereLiming materials Determination of the breakdown of granulated calcium and calcium/magnesium carbonates under the influence of water
Dansk standard DS/EN 15704 1. udgave 2009-01-23 Jordbrugskalk Bestemmelse af nedbrydning af granuleret calcium- og calcium/magnesiumcarbonater påvirket af vand Liming materials Determination of the breakdown
Læs mereEurocode 7: Geoteknik Del 1: Generelle regler
Dansk standard Tillæg DS/EN 1997-1/A1 1. udgave 2014-02-03 Eurocode 7: Geoteknik Del 1: Generelle regler Eurocode 7: Geotechnical design Part 1: General rules DS/EN 1997-1/A1 København DS projekt: M267839
Læs mereLavspændingssikringer Del 1: Generelle krav
Dansk standard DS/EN 60269-1 3. udgave 2007-06-19 Lavspændingssikringer Del 1: Generelle krav Low-voltage fuses Part 1: General requirements DS/EN 60269-1 København DS projekt: M205966 ICS: 29.120.50 Første
Læs mereEurocode 6: Murværkskonstruktioner Del 1-2: Generelle regler Brandteknisk dimensionering
Dansk standard DS/EN 1996-1-2 2. udgave 2007-03-16 Eurocode 6: Murværkskonstruktioner Del 1-2: Generelle regler Brandteknisk dimensionering Eurocode 6 Design of masonry structures Part 1-2: General rules
Læs mereKosmetik Mikrobiologi Vurdering af et kosmetikprodukts antimikrobielle beskyttelse
Dansk standard DS/EN ISO 11930 1. udgave 2012-04-25 Kosmetik Mikrobiologi Vurdering af et kosmetikprodukts antimikrobielle beskyttelse Cosmetics Microbiology Evaluation of the antimicrobial protection
Læs mereHjælpemidler til personer med funktionsevnenedsættelse Klassifikation og terminologi
Dansk standard DS/EN ISO 9999 6. udgave 2007-12-19 Hjælpemidler til personer med funktionsevnenedsættelse Klassifikation og terminologi Assistive products for persons with disability Classification and
Læs mereDS-information DS/CEN/TR 81-12
DS-information DS/CEN/TR 81-12 1. udgave 2014-11-13 Sikkerhedsregler for konstruktion og installation af elevatorer Grundlag og fortolkning Del 12: Anvendelse af EN 81-20 og EN 81-50 på specifikke markeder
Læs mereLoddefri forbindelser Del 2: Krimpede forbindelser Generelle krav, prøvningsmetoder og praktisk vejledning
Dansk standard Tillæg DS/EN 60352-2/A1 1. udgave 2013-09-26 Loddefri forbindelser Del 2: Krimpede forbindelser Generelle krav, prøvningsmetoder og praktisk vejledning Solderless connections Part 2: Crimped
Læs mereVarmvalsede stålplader med en tykkelse på 3 mm eller mere Dimensions- og formtolerancer
Dansk standard DS/EN 10029 2. udgave 2010-12-14 Varmvalsede stålplader med en tykkelse på 3 mm eller mere Dimensions- og formtolerancer Hot-rolled steel plates 3 mm thick or above Tolerances on dimensions
Læs mereGasfyrede tørretumblere af type B med en nominel belastning, der ikke overstiger 20 kw Del 2: Rationel energiudnyttelse
Dansk Standard DS/EN 12752-2 2. udgave 2001-11-09 Gasfyrede tørretumblere af type B med en nominel belastning, der ikke overstiger 20 kw Del 2: Rationel energiudnyttelse Gas-fired tumble dryers of type
Læs mereBoligmøbler Borde Prøvningsmetoder til bestemmelse af styrke, holdbarhed og stabilitet
Dansk Standard DS/EN 1730 2. udgave Godkendt: 2001-02-21 Boligmøbler Borde Prøvningsmetoder til bestemmelse af styrke, holdbarhed og stabilitet Domestic furniture Tables Test methods for determination
Læs mereMaskinsikkerhed Permanente adgangsveje til maskinanlæg Del 4: Faste stiger
Dansk standard Tillæg DS/EN ISO 14122-4/A1 1. udgave 2010-10-19 Maskinsikkerhed Permanente adgangsveje til maskinanlæg Del 4: Faste stiger Safety of machinery Permanent means of access to machinery Part
Læs mereGrænseflade for digital lysstyring (DALI) Del 208: Særlige krav til kontroludstyr Omskifterfunktion (udstyrstype 7)
Dansk standard DS/EN 62386-208 1. udgave 2009-09-22 Grænseflade for digital lysstyring (DALI) Del 208: Særlige krav til kontroludstyr Omskifterfunktion (udstyrstype 7) Digital addressable lighting Interface
Læs mereFertilizers Determination of the water-soluble potassium content
Dansk standard DS/EN 15477 1. udgave 2009-02-16 Gødning Bestemmelse af vandopløseligt kalium Fertilizers Determination of the water-soluble potassium content DS/EN 15477 København DS projekt: M229380 ICS:
Læs mere