English Dansk Deutsch V 1.23
|
|
- Christine Markussen
- 8 år siden
- Visninger:
Transkript
1
2
3 English... 2 Dansk Deutsch V 1.23
4 Contents Trademarks... 6 Introduction... 6 Intended Use... 6 Package contents... 7 Technical specifications Safety instructions Recordings (photo/video) of persons and the right on the own image Using on the road Children and persons with disabilities Battery Warning: risk of explosion! Cables Water-resistance Copyright Overview Before you start Inserting/removing a memory card Inserting the battery pack Buttons LEDs Charging the Battery English
5 Setting the date and time Getting started Powering the camcorder on/off The display Selecting the operating mode Recording Recording videos Taking pictures Burst mode Time-lapse mode Self-timer The menu Menu icons Setting the video resolution Selecting the camera s field of view Setting the time-lapse delay Rotating the recording by Deleting recordings/formatting the memory card Rotating the display image by Toggling the status LEDs on/off Customising the display brightness Customising the beeper volume Customising the auto power-off delay English - 3
6 Setting the date and time Connecting a remote control (not included in the package) Resetting to factory defaults Connecting a microphone Viewing recordings on a television Transferring recordings to a computer Connecting the camcorder to a computer Using a card reader Write-protecting the SD card adapter Software System Requirements Installing the software Uninstalling the software The main screen Selecting the language Editing recordings Viewing recordings Importing recordings Selecting navigation view Preview window Toolbar Import Merge videos English
7 Creating an AVCHD Disk Cutting video clips Upload to YouTube Upload to Facebook Photo album Album page Using the accessories Water-resistant case Cleaning after using under water Replacing the back cover Removing / fixing the adapter Velcro Swivel holder Replacing the adhesive pad Bike holder Adapter for other mounting systems Troubleshooting Maintenance / cleaning Maintenance Cleaning Environmental regulations and disposal information Conformity Notes Warranty and Service Information English - 5
8 Trademarks HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC in the USA and other countries. Microsoft Windows is a registered trademark of Microsoft Corporation, USA. SD and SDHC are registered trademarks. USB is a registered trademark. Other names and products can be trademarks or registered trademarks of their respective owners. Introduction Thank you for purchasing this SCAA 5.00 A1 action camcorder. The action camcorder is the ideal companion for your sports activities. Its extensive accessories allow you to use the action camcorder for the most different scenarios. It allows you to capture wonderful memories at any time. Intended Use Your camcorder is a Consumer Electronics device and is designed exclusively for recording movies and pictures. Any use other than that mentioned above does not correspond to the intended use. The device may only be used for private purposes, not for industrial or commercial ones. This device fulfils all relevant standards and directives relating to CE Conformity. If any changes are made to the equipment other than those endorsed by the manufacturer, compliance with these standards and directives can no longer be guaranteed. Only use the accessories recommended by the manufacturer. Observe the regulations and laws in the country of use. 6 - English
9 Package contents SilverCrest SCAA 5.00 A1 action camcorder FJ-SLB-10A battery 4 GB microsd card (incl. SD card adapter) USB cable HDMI cable Water-resistant case (incl. adapter) English - 7
10 Lens cover Water-resistant back cover (incl. adapter) Open back cover Bike holder Swivel holder Adapter for other mounting systems 8 - English
11 Flat adhesive socket Curved adhesive socket Velcro with latch Velcro without latch 3 x adhesive pads for replacement 6 x anti-mist pads CD-ROM with software (lineart illustration) User manual (lineart illustration) English - 9
12 Technical specifications Capture sensor Lens Display Internal memory External memory Operating modes 5-megapixel CMOS sensor Wide-angle, F2.8, f=2.5mm OLED status indicator 128MB (approx. 89.9MB free / partially used by firmware) microsd/sdhc (up to 32GB) Video recording, picture recording Video Format: H.264 (AVI) Resolution: Photo Format: JPEG Resolution: 1080p 1920 x 1080 (30 fps) 960p 1280 x 960 (30 fps) 720p 1280 x 720 (60 fps) 5 megapixel Power supply 5V, 0.5A for power supply via PC USB port 5V, 1.0A for power supply via external power adapter Battery charging time Runtime with fully charged battery Battery approx. 4.5 hours for power supply via PC USB port approx. 2.5 hours for power supply via external power adapter Max. approx. 1.5 hours Li-Ion battery FJ-SLB-10A / 3.7V, 1130mAh Manufacturer: FUJI ELECTRONICS(SHENZHEN) CO.,LTD Connectors and sockets USB 2.0 HDMI MIC IN (2.5mm jack) 10 - English
13 Microphone built-in SilverCrest SCAA 5.00 A1 Built-in wireless receiver: Modulation: GFSK Frequency: 2403MHz to 2477MHz Data transfer speed: 250kbps / 1Mbps / 2Mbps Number of channels: 75 Operating temperature * Storage temperature Relative humidity Dimensions (W x H x D) Weight (incl. rechargeable battery) 0 C to +35 C 0 C to +45 C max. 85 % rel. humidity approx. 60 x 43 x 43 mm approx. 77 g * Temperatures below 0 C may reduce the battery capacity and/or lifetime. If you want to use your camcorder at temperatures below 0 C you should install it in the water-resistant case with the water-resistant back cover. This guarantees that the heat released from the camcorder operation also heats up the battery. When not using the camcorder you should store the battery in your pocket, for example. The technical specifications and design can be changed without prior notice. English - 11
14 Safety instructions Before you use this device for the first time, please read the following notes and heed all warnings, even if you are familiar with handling electronic devices. Keep these operating instructions in a safe place for future reference. If you sell the device or give it away, pass on the operating instructions at the same time. This symbol denotes important information for the safe operation of the product and user safety. This symbol denotes further information on the topic. To power the camcorder use the supplied battery pack only (manufacturer: FUJI ELECTRONICS(SHENZHEN) CO.,LTD / model: FJ- SLB-10A). Always make sure that no direct heat sources (e.g. radiators) can affect the device; the device is not exposed to direct sunlight or bright artificial light; the camcorder may be used within the allowed operating temperature range from 0 C to 35 C only; contact with spray, dripping water and corrosive liquids is avoided and the device is never operated near water; in particular the device may never be immersed in liquids (do not place any objects containing liquids, such as vases or drinks, on or near the device); 12 - English
15 Dripping and sprayed water and immersing the device is allowed only after the camcorder has been fitted into the protective water-resistant case; the device is never placed near magnetic fields (e.g. speakers); no fire hazards (e.g. burning candles) are placed on or near the device; no foreign bodies are introduced into the device; the device is not subject to any extreme temperature changes as this may cause moisture through condensation and cause short-circuits; If the device has been exposed to strong temperature variations anyway, wait (approx. 2 hours) before turning it on, so it has reached the ambient temperature. the device is not subjected to excessive shocks or vibrations. the device and its accessories are not damaged in order to avoid any further risks. Therefore you must inspect the device and its accessories regularly for any damage. If you find any component damaged, it must not be used. Never open the camcorder housing and have all repairs performed by qualified technical stuff only; Failure to heed the warnings above may result in damage to the device or injury. Recordings (photo/video) of persons and the right on the own image Please note that when recording any persons, whether portraits or groups of persons, every person has the right on her/his own image/recording. Recording underaged people is subject to the consent of the parents. In order to avoid any legal measures, make sure to respect the legislation of the country of use. Using on the road Please note that using the camera on the road, whether driving a car, riding a bicycle or as a pedestrian may distract you from the traffic resulting in severe accidents. This may harm your health and/or result in legal actions. Please make sure to respect the legislation of the country of use. English - 13
16 Children and persons with disabilities Electrical devices are not suitable for children. People with disabilities should only use electrical devices within the limits of their abilities. Do not allow children or persons with disabilities to use electrical devices when not under supervision. Unless they are instructed accordingly and supervised by a competent person responsible for their safety. Children should always be supervised to ensure that they do not play with the product. Small parts can represent choking hazards. Keep the packaging away from children and persons with disabilities too. There is a risk of suffocation! Battery Always insert the battery pack with the correct polarity. The correct polarity is labelled on the battery and inside the battery compartment. Never throw a battery into fire. Remove the battery pack if you do not plan to use the camcorder for a while. Improper use could cause explosions or leaks. Batteries must never be opened or deformed. Otherwise any leaking battery fluids may cause injuries. If the battery fluid becomes in contact with your skin or eyes, rinse with plenty of fresh water immediately and seek medical aid. Only operate this device with the battery pack supplied in order to avoid overheating, deformation of the casing, fire, electric shocks, explosion and other hazards. Batteries must be disposed of at specific collection points English
17 Warning: risk of explosion! Improper use could cause explosions or leaks. Never replace the battery in an explosionsensitive environment. While inserting or removing the battery a spark may be produced that could cause an explosion. Please head the usage restrictions of prohibitions regarding battery-powered devices at dangerous places like fuel storage areas. Explosion-sensitive areas are normally (but not always) labelled. These include fuel storage areas such as below deck on a boat, fuel line or tank areas, environments where the air contains inflammable substances (e.g. cereals dust or metal powder) and any areas where you should normally switch off your car engine. Respect the environment. Old batteries must not be disposed of with domestic waste. They must be handed in at a collection point for waste batteries. Cables Unplug all cables by holding the plugs and never pull on the cables themselves. Never place pieces of furniture or other heavy objects on the cables and take care that they do not become damaged, especially at the plugs and sockets. Never tie knots in a cable and do not tie it together with other cables. All cables should be laid so that nobody can trip over them or be obstructed by them. English - 15
18 Water-resistance The camcorder itself is not water-resistant. It can only be used under water in combination with its water-resistant case. The water-resistant case is water-resistant up to a depth of 60 m. To guarantee its water resistance, do not use the camcorder with the water-resistant case for longer than 60 minutes under water at a time. The water resistance of this camcorder applies to salt and fresh water only. It does not apply to any cleaners, chemicals, solvents or water in public swimming pools. Liquids of this kind must be wiped off the water-resistant case immediately. Only use the water-resistant case in water of temperatures of between 0 C and 35 C. Avoid excessive vibration or shaking under water. Otherwise there is a risk that the water-resistant case opens. This can damage the camcorder and any recordings. Copyright All the contents of this user manual are protected by copyright and provided to the reader for information only. Copying data and information without the prior explicit written consent of the author is strictly forbidden. This also applies to any commercial use of the contents and information. All texts and diagrams are up to date as of the date of printing English
19 Overview SilverCrest SCAA 5.00 A1 An additional illustration of the items and controls and their corresponding numbers can be found on the inner page of the fold-out cover of this user manual. You can keep this page folded out whilst reading the different chapters of this user manual. This will permit you to refer to the corresponding items at any time. 1 Display 2 On/Off/Mode button 3 Status LED 4 Speaker 5 Lens 6 Status LED 7 microsd card slot 8 HDMI output 9 Record button 10 Battery compartment 11 Status LED 12 Microphone 13 USB/charging connector 14 Microphone connector 15 Status LED English - 17
20 Before you start Inserting/removing a memory card You should insert a microsd memory card to record your videos and pictures. If there is no microsd memory card inserted, all recordings will be stored on the internal camcorder memory. As the internal memory is quite small, only a few recording may be stored. Insert the supplied microsd in order to be able to store more recordings. Proceed as follows: Power the camcorder off before you insert or remove a memory card. Insert the memory card with the contacts facing towards the front of the device (towards the lens [5]) into the microsd card slot [7] until it clicks in place. To remove the memory card, gently press on the inserted card. The memory card will protrude a little so that you can get a hold of it and remove it. Only use Speed Class 4 or faster memory cards English
21 Inserting the battery pack Insert the battery pack as follows into the camcorder: SilverCrest SCAA 5.00 A1 Open the battery compartment [10]. To do so, press on the ribbed area of the battery compartment cover and slide it into the direction of the arrow until the closed arrow on the cover and the opened arrow on the camera housing are aligned. Next lift the battery compartment cover to remove it. Align the contacts of the battery pack with the contacts in the battery compartment [10]. Make sure that the [+] and [-] contact markings on the battery and in the compartment [10] match. Next fully insert the battery pack into the battery compartment [10]. Make sure to place the end of the strip over the battery pack. English - 19
22 Close the battery compartment [10]. To do so, press on the ribbed area of the battery compartment cover and slide it into the direction of the arrow until the closed arrow on the cover and the closed arrow on the camera housing are aligned. To remove the battery pack, open the battery compartment [10] as described above. Pull the strip to remove the battery English
23 Buttons Button On/Off/Mode button [2] Record button [9] Function Press and hold this button for at least 3 seconds to switch the camcorder on or off. Press this button several times while the camcorder is switched on to toggle between the different operating modes (Video, Photo Burst, Time-lapse and Menu). Press this button while the menu is shown to navigate through the menu items. Press this button in Video mode to start or stop recording. Press this button in Photo mode to take a picture. Press this button while the menu is shown to select a menu item. LEDs The status LEDs can be found on the top, bottom, front and back panels of the camcorder. They allow you to monitor the camcorder status under the most different mounting scenarios. LED Colour Description Status LED [3] Status LED [3, 11 and15] Status LED [6] Green Operation: Powering on or photo capture. Fast flashing green USB Mode: Camcorder powered on Flashing red Operation: Recording a video Fast flashing red Operation: Self-timer enabled Flashing orange Operation: Recording a video USB Mode: Battery being charged Off USB Mode: Battery is fully charged English - 21
24 Charging the Battery It is possible to recharge the camcorder battery pack via the USB power of a computer. To do this, you will need the USB cable supplied. Insert the battery pack as described above into the camcorder. Use the USB cable to connect the camcorder to an available USB port on a computer. Insert the small plug of the supplied USB cable into the USB/charge port of your camcorder [13] and the large plug into a USB port on your computer. You can keep the camcorder powered off while charging. Press and hold the On/Off/Mode button [2] for three seconds to switch the camcorder off. The status LED [6] flashes orange during charging. When the charging process is complete, the status LED [6] goes out. Some computers do not supply USB power while they are turned off. If the camcorder does not charge, make sure your computer is switched on English
25 In addition to the options above, you can also connect the camcorder to an external USB power adapter (not supplied) in order to charge the battery pack. To do this, you will need the USB cable supplied. You can purchase a suitable 5V USB power adapter with at least 1A from any electronics retail outlet. When using an external power adapter, it must be connected to an easily accessible wall outlet in order to be able to disconnect it quickly in case of an emergency. Setting the date and time To set the date and time: Press and hold the On/Off/Mode button [2] for at least 3 seconds to switch the camcorder on. The camcorder initialises in Video mode automatically. To open the menu, press the On/Off/Mode button [2] five times. If the display is in dimmed power-saving mode, press the On/Off/Mode button [2] once to toggle to active mode. Press the record button [9] to open the menu. The following menu is shown: English - 23
26 The MORE menu will be highlighted. Press the record button [9] to open the MORE menu. Press the On/Off/Mode button [2] multiple times until the TIME menu is highlighted. Press the record button [9] to open the TIME menu. Next you can set the year, month, day, hours and minutes in sequence. Press the record button [9] to increase the value stepwise. Press the On/Off/Mode button [2] to confirm each entry. After all settings have been entered, press the On/Off/Mode button [2] to select OK. Press the record button [9] to confirm. To exit the MORE menu, press the On/Off/Mode button [2] multiple times until the EXIT item is highlighted and then press the record button [9] to confirm. Next you can use the On/Off/Mode button [2] to select an operating mode English
27 Getting started Powering the camcorder on/off Press and hold the On/Off/Mode button [2] for at least 3 seconds to switch the camcorder on or off. While powering on the status LED [3] goes green. The display The display [1] shows the following information: No. Icon* Description 21 Number of recordings saved 22 Battery capacity Alternates between the following: 23 Displays the field of view of the camera: WIDE or ULTRA Shows the remaining storage space in percentage. 24 Displays the option that is executed when pressing the record button [9]. When this icon is shown, pressing the record button [9] starts a video recording. When this icon is shown, pressing the record button [9] captures a picture. English - 25
28 No. Icon* Description Shows the operating mode currently selected. Video mode: Use this mode for video recording. This icon also resumes the current video recording settings. Photo mode: Use this mode for taking pictures. 25 Burst mode: Use this mode to take a series of 10 pictures. Time-lapse mode: Use this mode for time-lapse video recording. This icon also resumes the current settings. Self-timer: Use this mode for self-timer shots. Setup: Use this mode to customise the camcorder settings. * The icons may vary depending on the selected setting English
29 Selecting the operating mode Press the On/Off/Mode button [2] several times to toggle between the different operating modes. The currently selected mode is indicated on the top-left corner of the display [1]. The modes are cycled as follows: Video mode Photo mode Burst mode Setup Self-timer Time-lapse mode If the display is in dimmed power-saving mode, press the On/Off/Mode button [2] once to toggle to active mode. Recording Recording videos Press and hold the On/Off/Mode button [2] for at least 3 seconds to switch the camcorder on. The camcorder initialises in Video mode automatically. Press the record button [9] to start recording. During recording the status LEDs [3, 11 and 15] will flash red and the status LED [6] orange. Press the record button [9] again to stop recording. The status LEDs [3, 11 and15] go off. English - 27
30 Taking pictures Press and hold the On/Off/Mode button [2] for at least 3 seconds to switch the camcorder on. The camcorder initialises in Video mode automatically. To switch to Photo mode (PHOTO), press the On/Off/Mode button [2] once. Press the record button [9] to take a picture. While saving the status LED [3] goes green. Burst mode Press and hold the On/Off/Mode button [2] for at least 3 seconds to switch the camcorder on. The camcorder initialises in Video mode automatically. To switch to Burst mode (BURST), press the On/Off/Mode button [2] twice. Press the record button [9] to take a series of 10 pictures. While saving the status LED [3] goes green. Time-lapse mode Press and hold the On/Off/Mode button [2] for at least 3 seconds to switch the camcorder on. The camcorder initialises in Video mode automatically. To switch to Time-lapse mode (LAPSE), press the On/Off/Mode button [2] three times. Press the record button [9] to start recording. During recording the status LEDs [3, 11 and 15] will flash red and the status LED [6] orange. Press the record button [9] again to stop recording. The status LED [3] goes off English
31 Self-timer Press and hold the On/Off/Mode button [2] for at least 3 seconds to switch the camcorder on. The camcorder initialises in Video mode automatically. To switch to Self-timer mode (TIMER), press the On/Off/Mode button [2] four times. Press the record button [9] to enable the self-timer. After the self-timer has been enabled, the LED [3] and LEDs [11, 15 and 6] flash slowly at the beginning and then fast red and orange. The photo is taken 10 seconds after the self-timer is enabled. The menu The menu lets you customise the camcorder settings and record parameters. Press and hold the On/Off/Mode button [2] for at least 3 seconds to switch the camcorder on. The camcorder initialises in Video mode automatically. To open the menu, press the On/Off/Mode button [2] five times. Press the record button [9] to open the menu. The following menu is shown: Press the On/Off/Mode button [2] to select the desired icon or option. Press the record button [9] to confirm your selection. English - 29
32 Menu icons Customise recording settings To set the video resolution To select the camera s field of view To set the self-timer delay To rotate the recording by 180 To delete recordings/format the memory card To exit the menu Customise camcorder settings To rotate the display image by 180 To toggle the status LEDs on/off To customise the display brightness To customise the beeper volume To customise the auto power-off delay To set the date and time To connect a remote control (not included in the package) To reset to factory defaults To exit the menu Record button [9] to confirm On/Off/Mode button [2] to select 30 - English
33 Setting the video resolution To set the video resolution, proceed as follows: Press the On/Off/Mode button [2] multiple times to select the SETUP menu and then press the record button [9] to confirm. The VIDEO menu will be highlighted. Press the record button [9] to open the VIDEO menu. Press the On/Off/Mode button [2] to select an option. The following settings are available: 1080p 1920 x 1080 (30 fps) 960p 1280 x 960 (30 fps) 720p 1280 x 720 (60 fps) Press the record button [9] to confirm your selection. To exit the SETUP menu, press the On/Off/Mode button [2] multiple times until the EXIT item is highlighted and then press the record button [9] to confirm. English - 31
34 Selecting the camera s field of view To select the camera s field of view, proceed as follows: Press the On/Off/Mode button [2] multiple times to select the SETUP menu and then press the record button [9] to confirm. Press the On/Off/Mode button [2] multiple times until the FOV menu is highlighted. Press the record button [9] to open the FOV menu. Press the On/Off/Mode button [2] to select an option. The following settings are available: Ultra wide-angle lens Wide-angle lens Press the record button [9] to confirm your selection. To exit the SETUP menu, press the On/Off/Mode button [2] multiple times until the EXIT item is highlighted and then press the record button [9] to confirm. The "Ultra" and "Wide" settings only apply to 960p and 720p video recordings. For 1080p video recordings, the setting will always be "Ultra" (independently of the selection made in the menu) English
35 Setting the time-lapse delay To set the time-lapse delay, proceed as follows: Press the On/Off/Mode button [2] multiple times to select the SETUP menu and then press the record button [9] to confirm. Press the On/Off/Mode button [2] multiple times until the LAPSE menu is highlighted. Press the record button [9] to open the LAPSE menu. Press the On/Off/Mode button [2] to select an option. The following settings are available: 1 SEC, 3 SEC, 5 SEC, 10 SEC, 30 SEC and 60 SEC. Press the record button [9] to confirm your selection. To exit the SETUP menu, press the On/Off/Mode button [2] multiple times until the EXIT item is highlighted and then press the record button [9] to confirm. English - 33
36 Rotating the recording by 180 In this menu you can have your videos and photos recordings rotated by 180. To enable it, proceed as follows: Press the On/Off/Mode button [2] multiple times to select the SETUP menu and then press the record button [9] to confirm. Press the On/Off/Mode button [2] multiple times until the UP/DOWN menu is highlighted. Press the record button [9] to open the UP/DOWN menu. Press the On/Off/Mode button [2] to select an option. The following settings are available: ON and OFF. Select ON to have your recording rotated by 180. Select OFF if you don t want to rotate the recordings. Press the record button [9] to confirm your selection. To exit the SETUP menu, press the On/Off/Mode button [2] multiple times until the EXIT item is highlighted and then press the record button [9] to confirm English
37 Deleting recordings/formatting the memory card WARNING: During deleting/formatting all movies and pictures saved will be deleted and cannot be restored. Make sure that all recordings you want to keep have been backed up to a different medium. To delete videos or photos from the internal memory or to format the internal memory, you first have to remove the memory card (if one is inserted). This menu lets you delete any recordings or format the memory card or internal memory. Proceed as follows: Press the On/Off/Mode button [2] multiple times to select the SETUP menu and then press the record button [9] to confirm. Press the On/Off/Mode button [2] multiple times until the DELETE menu is highlighted. Press the record button [9] to open the DELETE menu. Press the On/Off/Mode button [2] to select an option. The following options are available: Erases the last-recorded video or photo. Erases all files stored on the memory card or the internal memory. English - 35
38 Formats the memory card or internal memory. Press the record button [9] to confirm your selection. You ll need to confirm the deleting/formatting once again. If you want, you can also cancel this process. Press the On/Off/Mode button [2] to select an option. The following options are available: Confirm (DELETE or FORMAT) Cancel (EXIT) Press the record button [9] to confirm your selection. To exit the DELETE menu, press the On/Off/Mode button [2] multiple times until the EXIT item is highlighted and then press the record button [9] to confirm. To exit the SETUP menu, press the On/Off/Mode button [2] multiple times until the EXIT item is highlighted and then press the record button [9] to confirm English
39 Rotating the display image by 180 This menu allows you to rotate the display image by 180. Proceed as follows: Press the On/Off/Mode button [2] multiple times to select the MORE menu and then press the record button [9] to confirm. The UP/DOWN menu will be highlighted. Press the record button [9] to open the UP/DOWN menu. Press the On/Off/Mode button [2] to select an option. The following settings are available: and. Select to restore the default value. Use the setting to rotate the display image by 180. Press the record button [9] to confirm your selection. To exit the MORE menu, press the On/Off/Mode button [2] multiple times until the EXIT item is highlighted and then press the record button [9] to confirm. English - 37
40 Toggling the status LEDs on/off This menu allows you to enable or disable the camcorder s status LEDs. Proceed as follows: Press the On/Off/Mode button [2] multiple times to select the MORE menu and then press the record button [9] to confirm. Press the On/Off/Mode button [2] multiple times until the LED menu is highlighted. Press the record button [9] to open the LED menu. Press the On/Off/Mode button [2] to select an option. The following settings are available: ON and OFF. Selecting ON will enable the camcorder s status LEDs and selecting OFF will disable them. Press the record button [9] to confirm your selection. To exit the MORE menu, press the On/Off/Mode button [2] multiple times until the EXIT item is highlighted and then press the record button [9] to confirm English
41 Customising the display brightness SilverCrest SCAA 5.00 A1 This menu allows you to customise the display brightness. Proceed as follows: Press the On/Off/Mode button [2] multiple times to select the MORE menu and then press the record button [9] to confirm. Press the On/Off/Mode button [2] multiple times until the BRIGHT menu is highlighted. Press the record button [9] to open the BRIGHT menu. Press the On/Off/Mode button [2] to select an option. The following settings are available: 100 %, 60 % and 30 %. You can adjust the display brightness in three levels (100 % = bright to 30 % = dark). Press the record button [9] to confirm your selection. To exit the MORE menu, press the On/Off/Mode button [2] multiple times until the EXIT item is highlighted and then press the record button [9] to confirm. English - 39
42 Customising the beeper volume This menu allows you to customise the beeper volume. Proceed as follows: Press the On/Off/Mode button [2] multiple times to select the MORE menu and then press the record button [9] to confirm. Press the On/Off/Mode button [2] multiple times until the BEEP menu is highlighted. Press the record button [9] to open the BEEP menu. Press the On/Off/Mode button [2] to select an option. The following settings are available: Sets the beeper volume to the highest value. Sets the beeper volume to a middle value. Disables the beeper. Press the record button [9] to confirm your selection. To exit the MORE menu, press the On/Off/Mode button [2] multiple times until the EXIT item is highlighted and then press the record button [9] to confirm English
43 Customising the auto power-off delay This menu allows you to customise the automatic power-off delay. You can get the camcorder to power off automatically after a certain time to save battery. If no buttons are pressed during the preset time, the camcorder powers off automatically. To adjust the automatic power-off delay, proceed as follows: Press the On/Off/Mode button [2] multiple times to select the MORE menu and then press the record button [9] to confirm. Press the On/Off/Mode button [2] multiple times until the AUTO OFF menu is highlighted. Press the record button [9] to open the AUTO OFF menu. Press the On/Off/Mode button [2] to select an option. The following settings are available: 1 MIN, 3 MIN, 5 MIN, 10 MIN, 30 MIN, 60 MIN and OFF. Select a delay time after which the camcorder powers off automatically if no operation has been made in the meantime. Select OFF to disable the auto power-off function. Press the record button [9] to confirm your selection. To exit the MORE menu, press the On/Off/Mode button [2] multiple times until the EXIT item is highlighted and then press the record button [9] to confirm. English - 41
44 Setting the date and time This lets you set the date and time. Proceed as follows: Press the On/Off/Mode button [2] multiple times to select the MORE menu and then press the record button [9] to confirm. Press the On/Off/Mode button [2] multiple times until the TIME menu is highlighted. Press the record button [9] to open the TIME menu. Next you can set the year, month, day, hours and minutes in sequence. Press the record button [9] to increase the value stepwise. Press the On/Off/Mode button [2] to confirm each entry. After all settings have been entered, press the On/Off/Mode button [2] to select OK. Press the record button [9] to confirm. To exit the MORE menu, press the On/Off/Mode button [2] multiple times until the EXIT item is highlighted and then press the record button [9] to confirm English
45 Connecting a remote control (not included in the package) This menu lets you connect a remote control (not supplied) to your camcorder. A remote control lets you start or stop video recordings and take pictures. You can order the remote control and consumables like adhesive pads from our hotline or by (see page 73). To connect the remote control to the camcorder, proceed as follows: Press the On/Off/Mode button [2] multiple times to select the MORE menu and then press the record button [9] to confirm. Press the On/Off/Mode button [2] multiple times until the BINDING menu is highlighted. Press the record button [9] to open the BINDING menu. The camcorder will start seeking the remote control for 30 seconds and indicates it on the display [1] as follows: Within the next 30 seconds, press both buttons (Video and Photo button) on the remote control English - 43
46 After the remote control has been successfully connected to the camcorder the red remote control LED will light up shortly. To exit the MORE menu, press the On/Off/Mode button [2] multiple times until the EXIT item is highlighted and then press the record button [9] to confirm. Now you can control your camcorder via the remote control. Press the [circle icon] button on the remote control to start or stop a video recording. Press the [camera icon] button on the remote control to take a picture. You can wear the remote control comfortably like a watch on your wrist giving you convenience and flexibility for all your activities. To control photography via the remote control you first have to set the camcorder to the desired mode (Photo, Burst, Time-lapse or Self-timer). In time-lapse mode, however, the remote control allows taking one picture only. To use the remote control to record videos, set the camcorder to Video mode. In Video mode you can even take picture by pressing the [camera icon] button on the remote control. The remote control is water-resistant up to a depth of 60 m. To guarantee its waterresistance, do not use the remote control for longer than 60 minutes under water at a time. The water-resistance applies to salt and fresh water only. It does not apply to any cleaners, chemicals, solvents or water in public swimming pools. Liquids of this kind must be wiped off the remote control immediately. Only use the remote control in water of temperatures of between 0 C and 35 C English
47 Resetting to factory defaults SilverCrest SCAA 5.00 A1 In this menu you can restore the factory-default settings of your camcorder. Proceed as follows: Press the On/Off/Mode button [2] multiple times to select the MORE menu and then press the record button [9] to confirm. Press the On/Off/Mode button [2] multiple times until the DEFAULT menu is highlighted. Press the record button [9] to open the DEFAULT menu. You ll have to confirm the factory reset. If you want, you can also cancel this process. Press the On/Off/Mode button [2] to select an option. The following options are available: Confirm (reset to factory defaults) Cancel (EXIT) Press the record button [9] to confirm your selection. To exit the MORE menu, press the On/Off/Mode button [2] multiple times until the EXIT item is highlighted and then press the record button [9] to confirm. English - 45
48 Connecting a microphone For best-quality audio recording you can connect an external microphone to the camcorder s microphone jack [14]. The internal microphone of your camcorder will be disabled automatically when you connect an external microphone. Viewing recordings on a television You can view your recordings on a television. The television needs to have an HDMI connector. Use the HDMI cable to connect the camcorder to an available HDMI port on a TV. Insert the small plug of the supplied HDMI cable into the HDMI port [8] of your camcorder and the large plug into a HDMI port on your TV. Power on your TV and select the HDMI input where your camcorder is connected to. Press and hold the On/Off/Mode button [2] for at least 3 seconds to switch the camcorder on. The camcorder initialises and the display indicates PLAYBACK, and after a few seconds the TV screen will show the following picture: 46 - English
49 Mode Battery capacity Memory card SilverCrest SCAA 5.00 A1 Type of recording Recordings thumbnail view Mode Shows the current operating mode. Shows the recordings in thumbnail view. Plays back the recording (photo or video). Battery capacity Shows the remaining battery level of your camcorder. English - 47
50 Memory card This icon indicates whether a memory card has been inserted or not. The icon is white if a memory card has been inserted and grey if not. Type of recording Here you can select what recordings shall be shown in thumbnail view. Press the On/Off/Mode button [2] to toggle between the options. The following options are available: Show video recordings only Show photo recordings only Show video and photo recordings Press the record button [9] to select a recording type. Recordings thumbnail view This displays the recordings in thumbnail view. Press the On/Off/Mode button [2] to highlight a recording. The highlighted recording appears with a frame in thumbnail view. If you have highlighted a video, its resolution will also be indicated on the left. Press the record button [9] to show the highlighted video or picture in full-screen mode. Press the On/Off/Mode button [2] to toggle between the recordings in fullscreen view. Press the record button [9] to start playing back a video. Press the record button [9] during video playback or in picture fullscreen mode to toggle to the video/photo/video+photo selection. Next you can use the On/Off/Mode button [2] to toggle between video only, photo only or video plus photo display mode English
51 Transferring recordings to a computer There are two ways of copying recordings from the camcorder to a computer: by connecting the camcorder to a computer via the USB cable by inserting the memory card into a card reader Be careful when renaming any folders and files. Do NOT try to change the folder or file names stored on the device from the computer or you may not be able to read any files contained here on your camcorder. Once you have copied your files or folders to the computer, you can rename or edit them on the computer. Connecting the camcorder to a computer Use the USB cable to connect the camcorder to an available USB port on a computer. Insert the small plug of the supplied USB cable into the USB/charge port of your camcorder [13] and the large plug into a USB port on your computer. Switch the camcorder on (if it is powered off). The computer will setup a removable disk that stores to your recordings. English - 49
52 Using a card reader If your computer has a card reader which is compatible with microsd or SD memory cards, you can read the contents of the memory card directly. Remove the memory card from the camcorder while it is switched off. Insert the microsd card directly into the microsd card reader or into the SD card adapter. If you are using the SD card adapter, insert it into the SD card reader on your computer (normally labelled SD/MMC). The PC will add the memory card contents under the drive letter representing the card reader in My Computer. Open My Computer on your PC and double-click on the drive representing the card reader. All recorded files can be found in a subfolder of the folder DCIM on this drive. Now you can copy the recorded files from the camcorder into a folder of your choice on the computer s hard disk. Write-protecting the SD card adapter The SD card adapter comes with a write protection tab. When write-protection is enabled (see the figure below right) you can only view existing videos and pictures, not delete or edit them. Write-protection disabled Write-protection enabled Disable the write-protection (see the figure above left) if you want to delete or edit any videos or pictures. Then reinsert the SD card adapter into the SD card reader on your computer English
53 Software SilverCrest SCAA 5.00 A1 The software supplied allows you to edit and play your recordings. For more information about using the software you can also use the software help function. Please note that programme updates may incur extra costs to you. System Requirements Operating system: Windows XP, Windows Vista, Windows 7 or Windows 8 CPU: Intel/AMD Dual-Core processor or higher RAM: At least 1GB Graphics adapter: DirectX 9 or DirectX 10-compatible (recommended) Interface: USB 1.1 or higher Memory: At least 2GB free hard disk space Installing the software The software provided is on the CD-ROM supplied. To install the software, you first need to connect the camcorder to the computer using the USB cable. Use the USB cable to connect the camcorder to your computer. Then switch the camcorder on. Insert the CD-ROM supplied into the CD or DVD drive of your computer. The CD will launch automatically. Then follow the on-screen instructions to install. If the setup programme does not start automatically or you have cancelled it accidentally, you can launch the file Start HDCam.exe manually. Uninstalling the software To uninstall the software, please use the Uninstall Wizard found in the Control Panel of your operating system. English - 51
54 The main screen 1 Navigation bar with multiple view options 2 The preview window shows previews and further information like paths etc. 3 Toolbar for accessing the most common functions Selecting the language You can change the language of the software interface. From the main dialog, click: >Options >Preferences Select the language you want from the list and click OK to confirm. A message appears that a program restart is required. Click "OK" to confirm the message. Then start the application again English
55 Editing recordings Viewing recordings SilverCrest SCAA 5.00 A1 Use the USB cable to connect the camcorder to your computer. Then switch the camcorder on. 4 Drive display and selection 5 Recordings stored on the selected drive The following options are available: From the navigation (4), select the drive for which you want to display the contents. Click on the star icon on the top of the object (film strip) to rate the current recording. Click on the info icon to show further information on the current recording. Here you can insert a comment that can further be used for keyword searches. To display a recording in a new window, double-click on it. In the display window, click the arrow icons, or use the arrow keys on your keyboard to display the previous or next recording. To view a video recording, double-click on it. The video window contains Stop, Play and Pause icons. Click the arrow icons, or use the arrow keys on your keyboard to display the previous or next video. English - 53
56 To delete a recording, click the bin icon. Confirm the prompt which appears by pressing OK in order to delete the recording. Importing recordings You can use the Import function to archive your recordings. The recordings are copied to your computer. Once you have imported your recordings, you do not need to connect the camcorder to view them. Select all recordings that you want to import from the drive selected and click "Import" on the bottom toolbar. A prompt with various selection possibilities will open. To import the selected recordings, select the "Import selected scenes option. You can choose to import all or only all new recordings. If necessary, enter a folder name or use the default name. Click "OK" to confirm. Depending on the number of recordings, it can take a while to copy the files. After importing the recordings are still stored on the camera they are not deleted automatically after the import English
57 Selecting navigation view SilverCrest SCAA 5.00 A1 There are different options for opening your imported recordings. In the libraries, you can sort them by folder name or date. Click on the folder icon to sort by folder name. Click on the calendar icon. Folders for the different years appear. After doubleclicking on a folder a months view will show. Double-clicking on it will display the days view of the corresponding month. To open My Computer, click the button. Here you can find all the drives installed on your computer. For example, this allows you to access any recordings stored on a CD-ROM. Preview window The preview window gives you various options for sorting and editing your recordings. Shows all recordings according to their rating. Shows all recordings that have not been imported yet. Here you can filter to display only pictures, only videos or all recordings. The design of the selection icon may be different depending on the settings. Use the slider to adjust the preview image size. Shows recordings only. Shows the recordings with more information. You can enter a keyword to search for here. Please also note the chapter Viewing recordings on page 53. English - 55
58 Toolbar Import Merge videos Create AVCHD Upload to YouTube Upload to Facebook Photo album Album page Imports all recordings from any connected devices. Creates films from your video recordings. Burns your video files onto an AVCHD disk. Uploads videos to your YouTube account. Uploads videos to your Facebook account. Creates a photo album from your pictures. Creates a page (e.g. an invitation card) from your pictures. The icon entitled YouKu links to an Asian video portal and is not suitable for use in European countries. Import See page 54 - Importing recordings. Merge videos Merge videos lets you merge multiple video clips to make a film. Click the merge videos icon to show the video editing timeline. Drag the video clips you want onto the timeline at the bottom of the window. Click the "Next" button to start the process. Enter the storage path on your computer and then click Save. It is still possible to edit any videos that have already placed on the timeline English
59 Creating an AVCHD Disk SilverCrest SCAA 5.00 A1 AVCHD (Advanced Video Codec High Definition) is an innovative digital standard with high resolution and brilliant picture and sound quality. This format allows you to record onto writeable DVD disks and play back on suitable DVD players. It is a good addition to an HDTV television set. Not all players support playback from self-recorded AVCHD disks. Insert a DVD±R, DVD±R DL, DVD±RW or DVD-RAM disk into your DVD drive. Click the Create AVCHD Disk icon to open the disk compilation workspace. Drag the video clips you want onto the timeline at the bottom of the window. Click the "Next" button to start the process. Select the drive and folder from your hard disk and click OK. To use this function your computer must have a DVD drive capable of writing one of the following media types: DVD±R, DVD±R DL, DVD±RW or DVD-RAM. English - 57
60 Cutting video clips You can remove any unwanted sections from your video clips. From the video recordings overview, click on the scissors icon. The playback window appears for the recording currently selected. Navigate to the beginning of the scene that you want to cut. Then click. Navigate to the end of the scene that you wish to cut. Then click. Start cutting by clicking the confirmation icon. The section is cut and a new clip is created without the selection. The new clip will be saved to the My Creations folder. Upload to YouTube Click on the YouTube upload icon. Drag the video recording you want onto the timeline at the bottom of the window. Click Next. Enter your username and password and then click Login. Follow the YouTube on-screen instructions. Upload to Facebook Click on the Facebook upload icon. Drag the video recording you want onto the timeline at the bottom of the window. Click Next. Enter your address and password and click "Login". Then follow the Facebook on-screen instructions English
Portal Registration. Check Junk Mail for activation . 1 Click the hyperlink to take you back to the portal to confirm your registration
Portal Registration Step 1 Provide the necessary information to create your user. Note: First Name, Last Name and Email have to match exactly to your profile in the Membership system. Step 2 Click on the
Læs mereE-PAD Bluetooth hængelås E-PAD Bluetooth padlock E-PAD Bluetooth Vorhängeschloss
E-PAD Bluetooth hængelås E-PAD Bluetooth padlock E-PAD Bluetooth Vorhängeschloss Brugervejledning (side 2-6) Userguide (page 7-11) Bedienungsanleitung 1 - Hvordan forbinder du din E-PAD hængelås med din
Læs mereRPW This app is optimized for: For a full list of compatible phones please visit radiation. result.
TM TM RPW-1000 Laser Distance Measurer This app is optimized for: For a full list of compatible phones please visit www.ryobitools.eu/phoneworks IMPORTANT SAFETY S READ AND UNDERSTAND ALL INSTRUCTIONS.
Læs mereIPTV Box (MAG250/254) Bruger Manual
IPTV Box (MAG250/254) Bruger Manual Når din STB (Set top Box) starter op, bliver der vist en pop up boks på skærmen, hvor du kan åbne EPG ved at trykke på F2 (Nogle bokse kan fortælle at den har brug for
Læs mereDET KONGELIGE BIBLIOTEK NATIONALBIBLIOTEK OG KØBENHAVNS UNIVERSITETS- BIBLIOTEK. Index
DET KONGELIGE Index Download driver... 2 Find the Windows 7 version.... 2 Download the Windows Vista driver.... 4 Extract driver... 5 Windows Vista installation of a printer.... 7 Side 1 af 12 DET KONGELIGE
Læs mereIBM Network Station Manager. esuite 1.5 / NSM Integration. IBM Network Computer Division. tdc - 02/08/99 lotusnsm.prz Page 1
IBM Network Station Manager esuite 1.5 / NSM Integration IBM Network Computer Division tdc - 02/08/99 lotusnsm.prz Page 1 New esuite Settings in NSM The Lotus esuite Workplace administration option is
Læs mere3D NASAL VISTA 2.0
USER MANUAL www.nasalsystems.es index index 2 I. System requirements 3 II. Main menu 4 III. Main popup menu 5 IV. Bottom buttons 6-7 V. Other functions/hotkeys 8 2 I. Systems requirements ``Recommended
Læs mereVores mange brugere på musskema.dk er rigtig gode til at komme med kvalificerede ønsker og behov.
På dansk/in Danish: Aarhus d. 10. januar 2013/ the 10 th of January 2013 Kære alle Chefer i MUS-regi! Vores mange brugere på musskema.dk er rigtig gode til at komme med kvalificerede ønsker og behov. Og
Læs mereHelp / Hjælp
Home page Lisa & Petur www.lisapetur.dk Help / Hjælp Help / Hjælp General The purpose of our Homepage is to allow external access to pictures and videos taken/made by the Gunnarsson family. The Association
Læs mere3D NASAL VISTA TEMPORAL
USER MANUAL www.nasalsystems.es index index 2 I. System requirements 3 II. Main menu 4 III. Main popup menu 5 IV. Bottom buttons 6-7 V. Other functions/hotkeys 8 2 I. Systems requirements ``Recommended
Læs mereImportant Notice 6. Safety Instructions... 6 Children and Persons with Disabilities... 8 Charger and Rechargeable Battery... 8. Cables...
SCAZ 5.00 A1 Table of Contents Table of Contents Important Notice 6 Safety Instructions... 6 Children and Persons with Disabilities... 8 Charger and Rechargeable Battery... 8 Cables... 9 Repair and Maintenance...
Læs mereBefore you begin...2. Part 1: Document Setup...3. Part 2: Master Pages Part 3: Page Numbering...5. Part 4: Texts and Frames...
InDesign Basics Before you begin...................2 Part 1: Document Setup................3 Part 2: Master Pages................ 4 Part 3: Page Numbering...............5 Part 4: Texts and Frames...............6
Læs mereEnglish Dansk Deutsch
English... 2 Dansk... 75 Deutsch... 147 V1.36 Table of Contents Introduction... 6 Intended Use... 6 Package Contents... 7 Technical Specifications... 8 Safety Instructions... 10 Note on mains disconnection...
Læs mereEnglish... 2. Dank... 47. Deutsch... 91
English... 2 Dank... 47 Deutsch... 91 V 1.3 Contents Contents... 2 Trademarks... 5 Introduction... 5 Intended use... 5 Package Contents... 6 Technical specifications... 7 Safety instructions... 8 Explanation
Læs mereUSER GUIDE Version 2.9. SATEL Configuration Manager. Setup and configuration program. for SATELLINE radio modem
USER GUIDE Version 2.9 Setup and configuration program for SATELLINE radio modem 1 TABLE OF CONTENTS 1 TABLE OF CONTENTS... 2 2 GENERAL... 3 2.1 ABOUT SATEL CONFIGURATION MANAGER... 3 3 QUICK GUIDE TO
Læs mereShooting tethered med Canon EOS-D i Capture One Pro. Shooting tethered i Capture One Pro 6.4 & 7.0 på MAC OS-X 10.7.5 & 10.8
Shooting tethered med Canon EOS-D i Capture One Pro Shooting tethered i Capture One Pro 6.4 & 7.0 på MAC OS-X 10.7.5 & 10.8 For Canon EOS-D ejere der fotograferer Shooting tethered med EOS-Utility eller
Læs mereTM4 Central Station. User Manual / brugervejledning K2070-EU. Tel Fax
TM4 Central Station User Manual / brugervejledning K2070-EU STT Condigi A/S Niels Bohrs Vej 42, Stilling 8660 Skanderborg Denmark Tel. +45 87 93 50 00 Fax. +45 87 93 50 10 info@sttcondigi.com www.sttcondigi.com
Læs mereUser Manual for LTC IGNOU
User Manual for LTC IGNOU 1 LTC (Leave Travel Concession) Navigation: Portal Launch HCM Application Self Service LTC Self Service 1. LTC Advance/Intimation Navigation: Launch HCM Application Self Service
Læs mereEnglish Dansk Deutsch
English... 2 Dansk... 53 Deutsch... 105 V 1.2 Contents 1. Intended use... 4 2. Package contents... 5 3. Technical specifications... 6 4. Safety instructions... 7 5. Overview... 12 5.1 Controls and displays...
Læs mereVejledning til at tjekke om du har sat manuel IP på din computer.
Indhold Vejledning til at, komme på nettet. (DANSK)... 2 Gælder alle systemer.... 2 Vejledning til at tjekke om du har sat manuel IP på din computer.... 2 Windows 7... 2 Windows Vista... 2 Windows XP...
Læs mereUserguide. NN Markedsdata. for. Microsoft Dynamics CRM 2011. v. 1.0
Userguide NN Markedsdata for Microsoft Dynamics CRM 2011 v. 1.0 NN Markedsdata www. Introduction Navne & Numre Web Services for Microsoft Dynamics CRM hereafter termed NN-DynCRM enable integration to Microsoft
Læs mereMS-H280-Pro Magnetic Stirrer
MS-H280-Pro Magnetic Stirrer www..com Copyright: No part of this manual may be reproduced or transmitted without prior written permission of. VERSION201407 CONTENTS Chapter 1: Working Principle... 3 1
Læs mereframe bracket Ford & Dodge
, Rev 3 02/19 frame bracket 8552005 Ford & Dodge ITEM PART # QTY DESCRIPTION 1 00083 8 NUT,.50NC HEX 2 00084 8 WASHER,.50 LOCK 3 14189-76 2 FRAME BRACKET 4 14194-76 1 411AL FRAME BRACKET PASSENGER SIDE
Læs mereDANSK INSTALLATIONSVEJLEDNING VLMT500 ADVARSEL!
DANSK INSTALLATIONSVEJLEDNING VLMT500 Udpakningsinstruktioner Åben indpakningen forsigtigt og læg indholdet på et stykke pap eller en anden beskyttende overflade for at undgå beskadigelse. Kontroller at
Læs mereOpera Ins. Model: MI5722 Product Name: Pure Sine Wave Inverter 1000W 12VDC/230 30A Solar Regulator
Opera Ins Model: MI5722 Product Name: Pure Sine Wave Inverter 1000W 12VDC/230 30A Solar Regulator I.Precautions 1. Keep the product away from children to avoid children playing it as a toy and resultinginpersonalinjury.
Læs merehow to save excel as pdf
1 how to save excel as pdf This guide will show you how to save your Excel workbook as PDF files. Before you do so, you may want to copy several sheets from several documents into one document. To do so,
Læs mereQUICK START Updated:
QUICK START Updated: 24.08.2018 For at komme hurtigt og godt igang med dine nye Webstech produkter, anbefales at du downloader den senest opdaterede QuickStart fra vores hjemmeside: In order to get started
Læs mereVejledning til Sundhedsprocenten og Sundhedstjek
English version below Vejledning til Sundhedsprocenten og Sundhedstjek Udfyld Sundhedsprocenten Sæt mål og lav en handlingsplan Book tid til Sundhedstjek Log ind på www.falckhealthcare.dk/novo Har du problemer
Læs mereWIFI koder til Miljøagenturet: Brugernavn: AIACE course Kodeord: TsEG2pVL EU LOGIN KURSUS 21. AUGUST FORMIDDAG:
WIFI koder til Miljøagenturet: Brugernavn: AIACE course Kodeord: TsEG2pVL EU LOGIN KURSUS 21. AUGUST 2019 - FORMIDDAG: EU Login er EU s NemID. Det er blot adgangsnøglen til en række EU-applikationer. Vælg
Læs mereQUICK START Updated: 18. Febr. 2014
QUICK START Updated: 18. Febr. 2014 For at komme hurtigt og godt igang med dine nye Webstech produkter, anbefales at du downloader den senest opdaterede QuickStart fra vores hjemmeside: In order to get
Læs mereATEX direktivet. Vedligeholdelse af ATEX certifikater mv. Steen Christensen stec@teknologisk.dk www.atexdirektivet.
ATEX direktivet Vedligeholdelse af ATEX certifikater mv. Steen Christensen stec@teknologisk.dk www.atexdirektivet.dk tlf: 7220 2693 Vedligeholdelse af Certifikater / tekniske dossier / overensstemmelseserklæringen.
Læs mereDIVAR VIGTIGT! / IMPORTANT! MÅL / DIMENSIONS. The DIVAR wall lamp comes standard. with 2.4 m braided cord and a plug in power supply (EU or UK).
DIVAR VIGTIGT! / IMPORTANT! VIGTIGT læs vores anvisninger før du bruger produktet. Har du problemer med den elektriske installation, skal du kontakte en elektriker. Sørg for at altid slukke for strømmen
Læs mereAccessing the ALCOTEST Instrument Upload Data - NJSP Public Website page -
Accessing the ALCOTEST Instrument Upload Data - NJSP Public Website page - www.njsp.org Public Information Access Public Information Page Selection Within the Public Information Drop Down list, select
Læs merePrivat-, statslig- eller regional institution m.v. Andet Added Bekaempelsesudfoerende: string No Label: Bekæmpelsesudførende
Changes for Rottedatabasen Web Service The coming version of Rottedatabasen Web Service will have several changes some of them breaking for the exposed methods. These changes and the business logic behind
Læs mereAktivering af Survey funktionalitet
Surveys i REDCap REDCap gør det muligt at eksponere ét eller flere instrumenter som et survey (spørgeskema) som derefter kan udfyldes direkte af patienten eller forsøgspersonen over internettet. Dette
Læs mereDIVAR VIGTIGT! / IMPORTANT! MÅL / DIMENSIONS
DIVAR VIGTIGT! / IMPORTANT! VIGTIGT læs vores anvisninger før du bruger produktet. Har du problemer med den elektriske installation, skal du kontakte en elektriker. Sørg for at altid slukke for strømmen
Læs mereBrug sømbrættet til at lave sjove figurer. Lav fx: Få de andre til at gætte, hvad du har lavet. Use the nail board to make funny shapes.
Brug sømbrættet til at lave sjove figurer. Lav f: Et dannebrogsflag Et hus med tag, vinduer og dør En fugl En bil En blomst Få de andre til at gætte, hvad du har lavet. Use the nail board to make funn
Læs mereStatus på det trådløse netværk
Status på det trådløse netværk Der er stadig problemer med det trådløse netværk, se status her: http://driftstatus.sdu.dk/?f=&antal=200&driftid=1671#1671 IT-service arbejder stadig med at løse problemerne
Læs mereSikkerhedsvejledning
11-01-2018 2 Sikkerhedsvejledning VIGTIGT! Venligst læs disse instruktioner inden sengen samles og tages i brug Tjek at alle dele og komponenter er til stede som angivet i vejledningen Fjern alle beslagsdele
Læs mereBrinell Hardness Indentation Measurement System Operation Manual
Thank you for purchasing Brinell hardness indentation measurement system, to avoid any unnecessary damage and loss, please read this Manual carefully before operation and keep it safety for further study.
Læs mereMultiProgrammer Manual
MultiProgrammer Manual MultiProgrammeren bruges til at læse og skrive værdier til ModBus register i LS Controls frekvensomformer E 1045. Dansk Version side 2 til 4 The MultiProgrammer is used for the writing
Læs mereBrugsanvisning. Installation Manual
Manual size: 148 x 210 mm 175g copper paper(铜版纸印刷) UNIVERSAL BIL TAGBAGAGEBÆRER Brugsanvisning UNIVERSAL CAR ROOF RACK Installation Manual Model no. 10889 Tak fordi du valgte dette produkt, som vi håber
Læs mereVarenr.: 553925 90 højre 553926 90 venstre 554027 90º højre med coating 554028 90º venstre med coating
DK GH Skiftespor Varenr.: 55395 90 højre 55396 90 venstre 55407 90º højre med coating 55408 90º venstre med coating 553991 60º højre 553995 60º venstre 551058 60º højre med coating 551059 60º venstre med
Læs mereUNISONIC TECHNOLOGIES CO.,
UNISONIC TECHNOLOGIES CO., 3 TERMINAL 1A NEGATIVE VOLTAGE REGULATOR DESCRIPTION 1 TO-263 The UTC series of three-terminal negative regulators are available in TO-263 package and with several fixed output
Læs mereINSTALLATION INSTRUCTIONS STILLEN FRONT BRAKE COOLING DUCTS NISSAN 370Z P/N /308960!
Materials supplied: 1. (10) Zip Ties 2. (4) Hose Clamps 3. (2) Brake Duct Hose 4. (2) Brake Shields 5. (2) Front Brake Ducts ( Stock Fascia Only ) 6. (2) Washers 1 OD ( Stock Fascia Only ) 7. (8) Shims
Læs mereProject Step 7. Behavioral modeling of a dual ported register set. 1/8/ L11 Project Step 5 Copyright Joanne DeGroat, ECE, OSU 1
Project Step 7 Behavioral modeling of a dual ported register set. Copyright 2006 - Joanne DeGroat, ECE, OSU 1 The register set Register set specifications 16 dual ported registers each with 16- bit words
Læs mereROTERENDE TABURET 360 GRADER MED HYL Brugsanvisning. ROTATING SHOWER STOOL WITH TRAY Installation Manual. Size: 148 x 210 mm 105g copper paper
Size: 148 x 210 mm 105g copper paper ROTERENDE TABURET 360 GRADER MED HYL Brugsanvisning ROTATING SHOWER STOOL WITH TRAY Installation Manual Model. 10853 1. Fjern emballagen. 2. Taburettens ben samles
Læs merePMDK PC-Side Basic Function Reference (Version 1.0)
PMDK PC-Side Basic Function Reference (Version 1.0) http://www.icpdas.com PMDK PC-Side Basic Function Reference V 1.0 1 Warranty All products manufactured by ICPDAS Inc. are warranted against defective
Læs mereInstructions for use www.nilfisk-advance.com 1 2 3 PRECAUTIONARY MEASURES If the opening that sucks in the air, thesuction pipe orthe telescopic wand on pipe are blocked, you should switch off the vacuum
Læs mereUnitel EDI MT940 June 2010. Based on: SWIFT Standards - Category 9 MT940 Customer Statement Message (January 2004)
Unitel EDI MT940 June 2010 Based on: SWIFT Standards - Category 9 MT940 Customer Statement Message (January 2004) Contents 1. Introduction...3 2. General...3 3. Description of the MT940 message...3 3.1.
Læs mereSpecifikationer: Producer: Unitron a/s Kokmose 6, 6000 Kolding. Tlf Fax
DK MANUAL TIL SMÅGRISE Number: 1212-1201 Number: 1212-1202 Number: 1212-1203 HOLDER TIL Number: 1212-1205 MIXERHJUL TIL Number: 1212-1210 Specifikationer: UniFeeder monteres på siden af skillevæg i faresti,
Læs mereBoligsøgning / Search for accommodation!
Boligsøgning / Search for accommodation! For at guide dig frem til den rigtige vejledning, skal du lige svare på et par spørgsmål: To make sure you are using the correct guide for applying you must answer
Læs mereDavo-Meg 1002 & 1002B Dansk manual Side 3-5 English user manual Page 6-8
Davo-Meg 1002 & 1002B Dansk manual Side 3-5 English user manual Page 6-8 DK: Davo-Meg 1002: 87 98 301 819 Davo-Meg 1002B: 87 98 301 822 EAN: Davo-Meg 1002: 5703534100059 Davo-Meg 1002B: 5703534100202 Indhold
Læs mereLithium-Ion Jump-Starters / Jumper Cables
AUTOMOTIVE Lithium-Ion Jump-Starters / Jumper Cables Lithium-Ion Jump-Starter 1300: Part No. DRLJS130 1300 4 6 8 cylinder (6 liter gas 3 liter diesel) SafeJump technology prevents sparking and protects
Læs mereEnglish... 2. Dansk... 29. Deutsch... 59
English... 2 Dansk... 29 Deutsch... 59 V 1.3 Table of Contents Introduction... 3 Intended use... 3 Package contents... 3 Technical specifications... 4 Copyright... 4 Safety instructions... 5 Before you
Læs mereThe purpose of our Homepage is to allow external access to pictures and videos taken/made by the Gunnarsson family.
General The purpose of our Homepage is to allow external access to pictures and videos taken/made by the Gunnarsson family. Formålet med vores hjemmesiden er at gøre billeder og video som vi (Gunnarsson)
Læs mereRAVE. The New Radar Motion Sensor Rated IP67: Optimized for Harsh Outdoor Applications
RAVE The New Radar Motion Sensor Rated IP67: Optimized for Harsh Outdoor Applications Product Presentation RAVE radar motion sensor In addition to the RaDec and RMS product families, the new RAVE radar
Læs mereSkidding System. Challenge Us
Skidding System n Malm Orstads cutting edge Engineering department designs and fabricates tailor made skidding systems for all kinds of enviroments. Our skidding systems are amongst the most efficient
Læs mereLINK-56K. Emulator for Motorola s DSPs. A Product of Domain Technologies, Inc.
LINK-56K Emulator for Motorola s DSPs A Product of Domain Technologies, Inc. LINK-56K User s Guide, Version1.05 September, 2003 DSPs supported by this product: Motorola DSP56001 Motorola DSP56002 and derivatives
Læs mereBookingmuligheder for professionelle brugere i Dansehallerne 2015-16
Bookingmuligheder for professionelle brugere i Dansehallerne 2015-16 Modtager man økonomisk støtte til et danseprojekt, har en premieredato og er professionel bruger af Dansehallerne har man mulighed for
Læs mereEngelsk. Niveau D. De Merkantile Erhvervsuddannelser September Casebaseret eksamen. og
052431_EngelskD 08/09/05 13:29 Side 1 De Merkantile Erhvervsuddannelser September 2005 Side 1 af 4 sider Casebaseret eksamen Engelsk Niveau D www.jysk.dk og www.jysk.com Indhold: Opgave 1 Presentation
Læs mereBlackwire 215/225. Analog headset med ledning. Brugervejledning
Blackwire 215/225 Analog headset med ledning Brugervejledning Indhold Velkommen 3 Brug for mere hjælp? 3 Hvad er der i æsken 4 Integrerede kontroltaster 5 Når du har dit headset på 6 Juster hovedbøjlen
Læs mereAssembly Instructions. ROLZ-2 Portable AV/Conference Center
1 Assembly Instructions ROLZ-2 Portable AV/Conference Center Rolz-2 Portable AV/Conference Center Part Drawing Description Qty Part Drawing Description Qty Hardware List A 1 ½ Flat Head Screw 2 EA P-1
Læs mereElma DT 802D CO2 logger. Dansk/Norsk 2 English 4 EAN:
Elma DT 802D CO2 logger Dansk/Norsk 2 English 4 EAN: 5706445840366 Elma DT_802D CO2 logger 2 Brugervejledning Sikkerhed Læs venligst denne brugermanual grundigt igennem og anvend udelukkende instrumentet
Læs mereSPECIALTRYKKERIETS KUNDE WEBPORTAL KOM GODT I GANG
SPECIALTRYKKERIETS KUNDE WEBPORTAL KOM GODT I GANG Jeg håber du får fornøjelse af vores nye værktøj. WebApproval skal gøre det nemmere og mere sikkert for dig at godkende din tryksager. Har du spørgsmål,
Læs mereDX-610/DX-626 6CH.DMX DIMMER PACK
DX-610/DX-626 6CH.DMX DIMMER PACK User Manual Lite Puter Enterprise Co., Ltd. Website: E-mail sales@liteputer.com.tw 1 DX-610/626 [EUM-I] INDEX SAFETY INTRODUCTION...2 The Load Power...2 Working Environment...2
Læs mereVEDLIGEHOLDELSE AF SENGE
DK VEDLIGEHOLDELSE AF SENGE VEDLIGEHOLDELSE AF SENGE Sengen er typisk det møbel i hjemmet som bruges i flest timer gennem døgnet. Det betyder at sengen udsættes for et stort slid, og det er derfor vigtigt
Læs mereTrolling Master Bornholm 2013
Trolling Master Bornholm 2013 (English version further down) Tilmeldingen åbner om to uger Mandag den 3. december kl. 8.00 åbner tilmeldingen til Trolling Master Bornholm 2013. Vi har flere tilmeldinger
Læs mereSAF Brake Cylinders for disc brakes. Installation and Service Guide
SAF Brake Cylinders for disc brakes Contents Contents... 1 Safety Information... 2 Installation of the SAF Brake Cylinders... 3 Installation of the Single Diaphragm Cylinder... 3 Installation of the Double
Læs mereWATER BATH I Instruction Manual. Water Bath. Digital Control. Cat. No
Water Bath Digital Control Cat. No 340120 General Information 1. Unpack with care Please contact our sales office if any items are missing. 2. Read this instruction manual before start up. 3. For any question
Læs merePARALLELIZATION OF ATTILA SIMULATOR WITH OPENMP MIGUEL ÁNGEL MARTÍNEZ DEL AMOR MINIPROJECT OF TDT24 NTNU
PARALLELIZATION OF ATTILA SIMULATOR WITH OPENMP MIGUEL ÁNGEL MARTÍNEZ DEL AMOR MINIPROJECT OF TDT24 NTNU OUTLINE INEFFICIENCY OF ATTILA WAYS TO PARALLELIZE LOW COMPATIBILITY IN THE COMPILATION A SOLUTION
Læs mereHR7775, HR7774. 4203.000.5832.4.indd 1 15-09-09 15:28
HR7775, HR7774 4203.000.5832.4.indd 1 15-09-09 15:28 EN DA DE EL ES FI FR IT NL NO PT SV TR English Dansk Deutsch Ελληνικα Español Suomi Français Italiano Nederlands Norsk Português Svenska Türkçe AR FA
Læs mereRemember the Ship, Additional Work
51 (104) Remember the Ship, Additional Work Remember the Ship Crosswords Across 3 A prejudiced person who is intolerant of any opinions differing from his own (5) 4 Another word for language (6) 6 The
Læs mereBrugermanual. EnVivo Cassette Converter
Brugermanual EnVivo Cassette Converter INDHOLD Introduktion... 3 Produktegenskaber... 3 Udpakning af Cassette Converter... 3 Isætning / udskiftning af batterier... 4 Installation af software... 4 Beskrivelse
Læs mereCentralized Monitoring Management Platform. Manual
Centralized Monitoring Management Platform Manual 3 Contents 1. Products... 5 1.1. Summary... 5 1.2. Application Environment... 5 1.3. Install and uninstall... 6 2. Centralized Monitoring Management Platform
Læs mereThe X Factor. Målgruppe. Læringsmål. Introduktion til læreren klasse & ungdomsuddannelser Engelskundervisningen
The X Factor Målgruppe 7-10 klasse & ungdomsuddannelser Engelskundervisningen Læringsmål Eleven kan give sammenhængende fremstillinger på basis af indhentede informationer Eleven har viden om at søge og
Læs mereResource types R 1 1, R 2 2,..., R m CPU cycles, memory space, files, I/O devices Each resource type R i has W i instances.
System Model Resource types R 1 1, R 2 2,..., R m CPU cycles, memory space, files, I/O devices Each resource type R i has W i instances. Each process utilizes a resource as follows: request use e.g., request
Læs mereUnited Nations Secretariat Procurement Division
United Nations Secretariat Procurement Division Vendor Registration Overview Higher Standards, Better Solutions The United Nations Global Marketplace (UNGM) Why Register? On-line registration Free of charge
Læs mereHosted Exchange. Setup guide for e-mail clients & mobile devices. Date: 2011-09-13. Version: 15. Author: SBJ/ANB. Target Level: Customer
Hosted Exchange Setup guide for e-mail clients & mobile devices Date: 2011-09-13 Version: 15 Author: SBJ/ANB Target Level: Customer Target Audience: End User Language: en-us Page 1 of 35 LEGAL INFORMATION
Læs mereDigital Quick Setup Guide
Digital 9 Quick Setup Guide live, ch, sys The operating odes of the EM 946 Observing paraeters during transission live RF and audio level Diversity evaluation Configuring the syste sys Charge status of
Læs mereInstallation og brug af DMUs VPN klient Installation and use of DMU s VPN client
Installation og brug af DMUs VPN klient Installation and use of DMU s VPN client Bernhard Fabricius, IT-afdelingen Version 0.1, 2009-05-23 Tilmelding For at få adgang til VPN klienten skal der udfyldes
Læs mereDAY HUNTER KIT ASSEMBLY INSTRUCTIONS
DAY HUNTER KIT ASSEMBLY INSTRUCTIONS Attach the Shoulder Harness to the Frame 1. Pass the Upper Harness Attachment Straps (Diagram 1.) through the attachment points located inboard on the upper portion
Læs mereDANSK / ENGLISH DS PRO PROJEKTORBESLAG 180 CM MANUAL DS PRO PROJECTOR BRACKET 180 CM OWNERS MANUAL
DANSK / ENGLISH DANSK SIDE 1 DS Pro PRO projektorbeslag PROJEKTORBESLAG 180 cm 180 CM Tillykke med dit nye DS Pro projektorbeslag 180 cm. For at opnå det bedste resultat bedes du læse denne manual og udelukkende
Læs mereCHAPTER 8: USING OBJECTS
Ruby: Philosophy & Implementation CHAPTER 8: USING OBJECTS Introduction to Computer Science Using Ruby Ruby is the latest in the family of Object Oriented Programming Languages As such, its designer studied
Læs mereBeovox 5000 versions. Classic Audio Technical Information
Beovox 5000 versions Bang & Olufsen designed the Beovox 5000 for the Beolab 5000. During the period the Beolab 5000 was available (1967 1972) 3 different versions of the Beovox 5000 were released. In this
Læs mereWIKI & Lady Avenue New B2B shop
WIKI & Lady Avenue New B2B shop Login Login: You need a personal username and password Du skal bruge et personligt username og password Only Recommended Retail Prices Viser kun vejl.priser! Bestilling
Læs mereMicrosoft Dynamics C5. version 2012 Service Pack 01 Hot fix Fix list - Payroll
Microsoft Dynamics C5 version 2012 Service Pack 01 Hot fix 001 4.4.01.001 Fix list - Payroll CONTENTS Introduction... 3 Payroll... 3 Corrected elements in version 4.4.01.001... 4 Microsoft Dynamics C5
Læs mereEnglish... 2 Dansk... 68. v 1.37
English... 2 Dansk... 68 v 1.37 SSMT 1000 A1 mobile phone Contents Introduction... 8 Intended use... 8 Supplied items... 9 Technical data... 10 Safety instructions... 11 Operating environment... 12 Emergency
Læs mereWIO200A INSTALLATIONS MANUAL Rev Dato:
WIO200A INSTALLATIONS MANUAL 111686-903 Rev. 1.01 Dato: 10.01.2013 Side 1 af 14 Contents Contents... 2 Introduction... 3 Pin assignment of the terminal box connector for customer... 4 Pin assignment of
Læs mereBetjeningsvejledning
Betjeningsvejledning Baby Cam BC-10 Version 1.3 ease read this user manual carefully before using this produc 1 ilure to understand operation procedures may result in injury Packing List Packing List Indhold
Læs mereDANSK. INSTALLATIONSVEJLEDNING DS Pro Lærred med motor ADVARSEL!
DANSK INSTALLATIONSVEJLEDNING DS Pro Lærred med motor Udpakningsinstruktioner Åben indpakningen forsigtigt og læg indholdet på et stykke pap eller en anden beskyttende overflade for at undgå beskadigelse.
Læs mereBasic statistics for experimental medical researchers
Basic statistics for experimental medical researchers Sample size calculations September 15th 2016 Christian Pipper Department of public health (IFSV) Faculty of Health and Medicinal Science (SUND) E-mail:
Læs mereDanish Language Course for International University Students Copenhagen, 12 July 1 August Application form
Danish Language Course for International University Students Copenhagen, 12 July 1 August 2017 Application form Must be completed on the computer in Danish or English All fields are mandatory PERSONLIGE
Læs mereTGP 15 H. Betjeningsvejledning. Texas Power Line Pumper 2003 / 2
2003 / 2 Betjeningsvejledning Texas Power Line Pumper TGP 15 H Texas Andreas Petersen A/S Knullen 2 DK-5260 Odense S Tlf. 6395 5555 Fax 6395 5558 post@texas.dk - www.texas.dk ADVARSEL - Læs altid betjeningsvejledningen
Læs mereStarWars-videointro. Start din video på den nørdede måde! Version: August 2012
StarWars-videointro Start din video på den nørdede måde! Version: August 2012 Indholdsfortegnelse StarWars-effekt til videointro!...4 Hent programmet...4 Indtast din tekst...5 Export til film...6 Avanceret
Læs mereDanish Language Course for Foreign University Students Copenhagen, 13 July 2 August 2016 Advanced, medium and beginner s level.
Danish Language Course for Foreign University Students Copenhagen, 13 July 2 August 2016 Advanced, medium and beginner s level Application form Must be completed on the computer in Danish or English All
Læs mereLESSON NOTES Extensive Reading in Danish for Intermediate Learners #8 How to Interview
LESSON NOTES Extensive Reading in Danish for Intermediate Learners #8 How to Interview CONTENTS 2 Danish 5 English # 8 COPYRIGHT 2019 INNOVATIVE LANGUAGE LEARNING. ALL RIGHTS RESERVED. DANISH 1. SÅDAN
Læs mereEngelsk. Niveau C. De Merkantile Erhvervsuddannelser September 2005. Casebaseret eksamen. www.jysk.dk og www.jysk.com.
052430_EngelskC 08/09/05 13:29 Side 1 De Merkantile Erhvervsuddannelser September 2005 Side 1 af 4 sider Casebaseret eksamen Engelsk Niveau C www.jysk.dk og www.jysk.com Indhold: Opgave 1 Presentation
Læs mereSTEP X - Name of Step QUICK START GUIDE LIG1014A, LIG1080A, LIG1082A INDUSTRIAL SWITCH 24/7 TECHNICAL SUPPORT AT OR VISIT BLACKBOX.
STEP X - Name of Step QUICK START GUIDE LIG1014A, LIG1080A, LIG1082A INDUSTRIAL SWITCH 24/7 TECHNICAL SUPPORT AT 877.877.2269 OR VISIT BLACKBOX.COM STEP 1 - Hardware Description LIG1014A LIG1080A TABLE
Læs mereElektriske apparater til husholdningsbrug o.l. Sikkerhed Del 1: Generelle krav
Dansk standard Tillæg DS/IEC 60335-1/A1:2013 + Corr 1:2014 1. udgave 2014-05-08 Elektriske apparater til husholdningsbrug o.l. Sikkerhed Del 1: Generelle krav Household and similar electrical appliances
Læs mere