Lampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler
|
|
- Kim Brandt
- 5 år siden
- Visninger:
Transkript
1 Dansk standard Tillæg DS/EN :1993/A52: udgave Lampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps
2 DS/EN :1993/A52:2016 København DS projekt: M ICS: Første del af denne publikations betegnelse er: DS/EN, hvilket betyder, at det er en europæisk standard, der har status som dansk standard. Denne publikations overensstemmelse er: IDT med: IEC :1969/AMD52:2015. IDT med: EN :1993/A52:2016. DS-publikationen er på engelsk. DS-publikationstyper Dansk Standard udgiver forskellige publikationstyper. Typen på denne publikation fremgår af forsiden. Der kan være tale om: Dansk standard standard, der er udarbejdet på nationalt niveau, eller som er baseret på et andet lands nationale standard, eller standard, der er udarbejdet på internationalt og/eller europæisk niveau, og som har fået status som dansk standard DS-information publikation, der er udarbejdet på nationalt niveau, og som ikke har opnået status som standard, eller publikation, der er udarbejdet på internationalt og/eller europæisk niveau, og som ikke har fået status som standard, fx en teknisk rapport, eller europæisk præstandard DS-håndbog samling af standarder, eventuelt suppleret med informativt materiale DS-hæfte publikation med informativt materiale Til disse publikationstyper kan endvidere udgives tillæg og rettelsesblade DS-publikationsform Publikationstyperne udgives i forskellig form som henholdsvis fuldtekstpublikation (publikationen er trykt i sin helhed) godkendelsesblad (publikationen leveres i kopi med et trykt DS-omslag) elektronisk (publikationen leveres på et elektronisk medie) DS-betegnelse Alle DS-publikationers betegnelse begynder med DS efterfulgt af et eller flere præfikser og et nr., fx DS 383, DS/EN 5414 osv. Hvis der efter nr. er angivet et A eller Cor, betyder det, enten at det er et tillæg eller et rettelsesblad til hovedstandarden, eller at det er indført i hovedstandarden. DS-betegnelse angives på forsiden. Overensstemmelse med anden publikation: Overensstemmelse kan enten være IDT, EQV, NEQ eller MOD IDT: Når publikationen er identisk med en given publikation. EQV: Når publikationen teknisk er i overensstemmelse med en given publikation, men præsentationen er ændret. NEQ: Når publikationen teknisk eller præsentationsmæssigt ikke er i overensstemmelse med en given standard, men udarbejdet på baggrund af denne. MOD: Når publikationen er modificeret i forhold til en given publikation.
3 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN :1993/A52 January 2016 ICS English Version Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps (IEC :1969/A52:2015, modified) Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et de la sécurité - Partie 1: Culots de lampes (IEC :1969/A52:2015, modifiée) Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und Sicherheit - Teil 1: Lampensockel (IEC :1969/A52:2015, modifiziert) This amendment A52 modifies the European Standard EN :1993; it was approved by CENELEC on CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN :1993/A52:2016 E
4 EN :1993/A52:2016 European foreword The text of document 34B/1783/FDIS, future IEC :1969/A52, prepared by SC 34B Lamp caps and holders of IEC/TC 34 Lamps and related equipment was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN :1993/A52:2016. A draft amendment, which covers common modifications to IEC :1969/A52:2015 (34B/1783/FDIS), was prepared by CLC/TC 34Z Luminaires and associated equipment and approved by CENELEC. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement latest date by which the national standards conflicting with the document have to be withdrawn (dop) (dow) Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights. 2
5 EN :1993/A52:2016 Endorsement notice The text of the International Standard IEC :1969/A52:2015 was approved by CENELEC as a European Standard with agreed common modifications. COMMON MODIFICATIONS Delete sheet A-3 for screw caps E26. 3
6
7 NORME INTERNATIONALE INTERNATIONAL STANDARD CEI IEC AMENDEMENT 52 AMENDMENT Amendement 52 Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et de la sécurité Partie 1: Culots de lampes Amendment 52 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps Les feuilles de cet amendement sont à insérer dans la CEI (1969) The sheets contained in this amendment are to be inserted in IEC (1969) IEC 2014 Droits de reproduction réservés Copyright - all rights reserved International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland Telephone: Telefax: inmail@iec.ch Web:
8 IEC :1969/AMD52:2015 IEC SOMMAIRE CONTENTS SOMMAIRE PAR DÉSIGNATION... Pages PRÉAMBULE... 4 PRÉFACE... 4 CONTENTS BY DESIGNATION... Page FOREWORD... 5 PREFACE... 5 Feuilles Culots à deux broches G1.27, GX1.27 & GY Culots à deux broches G2.54, GX2.54 & GY Culots à deux broches G3.17 & GY Culots PX26d Culots à vis E Culots à vis EY Culots à baïonnette BAX9s Culots à baïonnette BAY9s Culots B22d Culot à baïonnette B22d-3(90 /135 )/25x A-2 Culots B15d Culots à baïonnette BA A-9 Culots à baïonnette BAY15d B-7 Culots BAZ C-3 Culots à baïonnette BA15s D-1 Culots BAW E-1 Culots à baïonnette BA Culots à baïonnette pour automobiles BA21-3(120 ) Culot à baïonnette BA Culot à baïonnette BA Culot à baïonnette BY22d Culots à baïonnette BAX15d Culots BAU Connecteur des lampes terminées G16d Culots à vis E Culots à vis E A-3 Culots à vis E Culots à vis E Culots à vis E Culots à vis E A-1 Culot à vis E Culot à vis E Culot à vis E27/51x Culot à vis E Culot à vis à double contact E26d Culots à vis préfocus EP Culots préfocus P20d, PX20d, PY20d & PZ20d Culots préfocus P22d & PX22d Culots 2G Culots préfocus - Assemblage de la collerette et du culot sur lampes terminées PX43t Culot préfocus PX13.5s Culot préfocus P26s sur la lampe terminée Culots préfocus - Assemblage de la collerette et du culot sur lampes terminées PKX22s Culots préfocus - Assemblage de la collerette et du culot sur lampes terminées P18s Sheet Bi-pin caps G1.27, GX1.27 & GY Bi-pin caps G2.54, GX2.54 & GY Bi-pin caps G3.17 & GY Caps PX26d Screw caps E Screw caps EY Bayonet caps BAX9s Bayonet caps BAY9s Caps B22d Bayonet cap B22d-3(90 /135 )/25x A-2 Caps B15d Bayonet caps BA A-9 Bayonet caps BAY15d B-7 Caps BAZ C-3 Bayonet caps BA15s D-1 Caps BAW E-1 Bayonet caps BA Bayonet automobile caps BA21-3(120 ) Bayonet caps BA Bayonet cap BA Bayonet cap BY22d Bayonet caps BAX15d Caps BAU Termination on finished lamps G16d Screw caps E Screw caps E A-3 Screw caps E Screw caps E Screw caps E Screw caps E A-1 Screw cap E Screw cap E Screw cap E27/51x Screw cap E Double contact screw cap E26d Prefocus screw caps EP Prefocus caps P20d, PX20d, PY20d & PZ20d Prefocus caps P22d & PX22d Caps 2G Prefocus caps - Assembly of ring and cap on finished lamps PX43t Prefocus cap PX13.5s Prefocus cap P26s on finished lamp Prefocus caps - Assembly of ring and cap on finished lamps PKX22s Prefocus caps - Assembly of collar and cap on finished lamps P18s IEC CEI
9 IEC :1969/AMD52:2015 IEC Feuilles Culots préfocus P43t Culot préfocus P13.5s Culots préfocus P28s Culots préfocus P40s Culot préfocus P30s Assemblage sur lampes terminées Culots de lampes de projection sur lampes terminées G17q-7, GX17q-7 & GY17q Culots préfocus - Assemblage de la collerette et du culot sur la lampe terminée P14.5s Culot préfocus PK22s Culot préfocus PG Assemblage de la collerette et du culot sur la lampe terminée Culots préfocus P Culots à deux broches G Culots à deux broches G Culots à deux broches GX A-1 Culot à deux broches G Culot G10q Culot à broche Fa Culot à deux contacts en retrait R17d sur lampes terminées Culots à broche Fa Culot à broche et extrémité de la lampe pour lampes tubulaires Fa Socles à deux broches prévus ou non pour l'emploi de refroidissseurs G6.35, GX6.35 & GY Socle à deux broches GZ A-3 Culots pour lampes tubulaires à deux culots S15s & S19s Culot à collet SX6s Culot à rainure S5.7s Culots sur lampe terminée G Culots sur lampe terminée PG12 & PGX Culot et socle de lampe à quatre broches GX38q Culots préfocus P29t Socle de lampe à deux broches GZ Culot GR Culot à deux broches G Culot à deux broches G Culot à deux broches GX Culots à deux broches GY9.5, GZ9.5, GZX9.5, GZY9.5 & GZZ A B-4 Socle de lampe à deux broches G Socle de lampe à deux broches GY A-1 Culot à deux broches G Socle à deux broches GX Socle à deux broches GY A B-2 Culot à deux broches GY Culot et socle à deux broches G Culots et socle de lampe à deux broches G Culot GR10q Culots G24, GX24 & GY Sheet Prefocus caps P43t Prefocus cap P13.5s Prefocus caps P28s Prefocus caps P40s Prefocus cap P30s Assembly on finished lamps Projector lamp caps on finished lamps G17q-7, GX17q-7 & GY17q Prefocus caps - Assembly of ring and cap on finished lamp P14.5s Prefocus cap PK22s Prefocus cap PG Assembly of collar and cap on finished lamp Prefocus caps P Bi-pin caps G Bi-pin caps G Bi-pin caps GX A-1 Bi-pin cap G Cap G10q Single-pin cap Fa Recessed double contact cap R17d on finished lamps Single-pin caps Fa Single-pin cap and end of lamp for tubular lamps Fa Bi-pin bases with and without provision for use with heat sinks G6.35, GX6.35, & GY Bi-pin lamp base GZ A-3 Caps for double-capped tubular lamps S15s & S19s Flanged cap SX6s Grooved cap S5.7s Caps on finished lamps G Caps on finished lamps PG12 & PGX Four-pin cap and lamp base GX38q Prefocus caps P29t Bi-pin lamp base GZ Cap GR Bi-pin cap G Bi-pin cap G Bi-pin cap GX Bi-pin caps GY9.5, GZ9.5, GZX9.5, GZY9.5 & GZZ A B-4 Bi-pin lamp base G Bi-pin lamp base GY A-1 Bi-pin cap G Bi-pin base GX Bi-pin base GY A B-2 Bi-pin cap GY Bi-pin cap and base G Bi-pin caps and lamp base G Cap GR10q Caps G24, GX24 & GY IEC CEI
10 IEC :1969/AMD52:2015 IEC Feuilles Culots P11.5d Culots pour lampes plafonnier SV Culots pour lampes plafonnier SV Culot 2G Culot 2GX A-2 Culots pour lampes tubulaires à radiation infrarouge SK15s Culots sur lampes terminées GX10q Culots sur lampes terminées GY10q Culot à deux broches GX Culots sur lampes terminées G32, GX32 & GY Culots préfocus - Assemblage de la collerette et du culot sur lampes terminées PY43d Culot préfocus - Assemblage de la collerette et du culot sur lampes terminées PZ43t Socle de lampe flash W10.6x8.5d Socle de lampe W2.1x9.5d Culot à un contact encastré et extrémité de la lampe R7s Culot à un contact encastré et extrémité de la lampe RX7s A-4 Socle de lampe préfocus WP4x9d Socle de lampe W2x4.6d Culot préfocus P45t Culots à collet SX4s/ Culots à collet SY4s/ A-1 Culot préfocus et extrémité de la lampe pour lampes pour automobiles X Connecteur des lampes terminées G16t Culots GRX10q Culot 2G Culot 2GX Socles W2.5x Socles WX2.5x A-1 Socle WY2.5x B-1 Socle WZ2.5x C-1 Socle WU2.5x D-1 Socles W3x16d & WX3x16d Socles W3x16q, WX3x16q & WY3x16q Culots PG13 & PGJ Socles de lampe à deux broches GU Socles à deux broches GU Culots PGJ Culots prefocus P32d & PK32d Culots S Socle de lampe à deux broches GU Culot et extrémité de la lampe Fc Culot W4.3x8.5d Culot à vis EZ Culot G17.5t Culot 2G Culot à deux broches GY Socle de lampe à deux broches GZ Socle de lampe à deux broches GU Sheet Caps P11.5d Festoon caps SV Festoon caps SV Cap 2G Cap 2GX A-2 Caps for tubular infra-red lamps SK15s Caps on finished lamps GX10q Caps on finished lamps GY10q Bi-pin cap GX Caps on finished lamps G32, GX32 & GY Prefocus caps - Assembly of ring and cap on finished lamps PY43d Prefocus cap - Assembly of ring and cap on finished lamps PZ43t Base of photo-flash lamp W10.6x8.5d Lamp base W2.1x9.5d Recessed single contact cap and end of lamp R7s Recessed single contact cap and end of lamp RX7s A-4 Prefocus lamp base WP4x9d Lamp base W2x4.6d Prefocus cap P45t Flanged caps SX4s/ Flanged caps SY4s/ A-1 Prefocus cap and end of lamp for automobile lamps X Termination on finished lamps G16t Caps GRX10q Cap 2G Cap 2GX Wedge bases W2.5x Wedge bases WX2.5x A-1 Wedge base WY2.5x B-1 Wedge base WZ2.5x C-1 Wedge base WU2.5x D-1 Lamp bases W3x16d & WX3x16d Lamp bases W3x16q, WX3x16q & WY3x16q Caps PG13 & PGJ Bi-pin lamp bases GU Bi-pin bases GU Caps PGJ Prefocus caps P32d & PK32d Caps S Bi-pin lamp base GU Cap and end of lamp Fc Cap W4.3x8.5d Screw cap EZ Cap G17.5t Cap 2G Bi-pin cap GY Bi-pin lamp base GZ Bi-pin lamp base GU IEC CEI
11 IEC :1969/AMD52:2015 IEC Feuilles Socle G Culot GU10q Culot GZ10q Culot 2GX Socle G Culots PG20 & PGU Culots P(X)(Y)26.4t & PJ26.4t Socle G Culots à vis avec jupe E26/50x39 & E26/51x Culots GRZ10d Culots GRZ10t Culots P38t Connecteur des lampes terminées G Culots GX Culots pour circuit imprimé GZX7d, GZY7d & GZZ7d Culots pour circuit imprimé GUX2.5d, GUY2.5d & GUZ2.5d Culot P23t Culot PX23t A-1 Culots G7.9 & GX Culots B8.4d & BX8.4d Culots 2G Culots GX Socle GX Socle GX Culots PGJY Culots PG18.5d Culot PGZ Culot BAW9s Culot BAZ9s Culot BAU9s... Culot BAUZ9s A B-1 Socle WZ3x16q Culot GU Culot PGJ Connecteurs des lampes terminees GU16d/GX16d Culots PGJ23t Culots PGJ(X) Culots GR14q Culots PU20d Culot SFa Culots SFc10-4 & SFc Culots G28d Culots CH14.65d Culots PGZ18 & PGZX Culots WP3.3x Culots PGJ21t Culots GU Culots et socle de lampe à deux broches GX Culot et pied de cable K12s Culots PGJX Socle de lampe à deux broches GUZ Culots PU43t Culots GX Culots à baïonette BA15d-3 (100 /130 ) Sheet Base G Cap GU10q Cap GZ10q Cap 2GX Base G Caps PG20 & PGU Caps P(X)(Y)26.4t & PJ26.4t Base G Skirted screw caps E26/50x39 & E26/51x Caps GRZ10d Caps GRZ10t Caps P38t Termination on finished lamps G Caps GX Printed circuit caps GZX7d, GZY7d & GZZ7d Printed circuit caps GUX2.5d, GUY2.5d & GUZ2.5d Cap P23t Cap PX23t A-1 Caps G7.9 & GX Caps B8.4d & BX8.4d Caps 2G Caps GX Base GX Base GX Caps PGJY Caps PG18.5d Cap PGZ Cap BAW9s Cap BAZ9s Cap BAU9s... Cap BAUZ9s A B-1 Base WZ3x16q Cap GU Cap PGJ Termination on finished lamps GU16d/GX16d Caps PGJ23t Caps PGJ(X) Caps GR14q Caps PU20d Cap SFa Caps SFc10-4 & SFc Caps G28d Caps CH14.65d Caps PGZ18 & PGZX Caps WP3.3x Caps PGJ21t Caps GU Bi-pin lamp caps GX Cap and cable shoe K12s Caps PGJX Bi-pin lamp base GUZ Caps PU43t Caps GX Caps BA15d-3 (100 /130 ) IEC CEI
12 IEC :1969/AMD52:2015 IEC Feuilles Culots G(X) Socle WUX2.5x16d Socle WUY2.5x16d Socle WUZ2.5x16d Socle WUU2.5x16d Socle WZX2.5x16q Socle WZY2.5x16q Culots préfocus PGJY Culots GX16t Sheets Caps G(X) Wedge base WUX2.5x16d Wedge basewuy2.5x16d Wedge base WUZ2.5x16d Wedge base WUU2.5x16d Wedge base WZX2.5x16q Wedge base WZY2.5x16q Prefocus caps PGJY Caps GX16t IEC CEI
13 IEC :1969/AMD52:2015 IEC 2015 LAMP CAPS AND LAMP BASES CULOTS ET SOCLES DE LAMPES Page 1/4 BA B8.4d & BX8.4d BA BAX9s BAY9s BAU9s A-1 BAUZ9s B-1 BAW9s BAZ9s B15d BA A-9 BAU BAW E-1 BAX15d BAY15d B-7 BAZ C-3 BA15s-3(100 /130 ) D-1 BA15d-3(100 /130 ) BA BA21-3(120 ) B22d B22d-3(90 /135 )/25x A-2 BY22d CH14.65d E E EP EY EZ E E E E E A-3 E26d E26/50x39 & E26/51x E E27/51x E A-1 E Fc Fa Fa Fa G1.27 & GX G2.54 & GX GUX2.5d, GUY2.5d & GUZ2.5d G G GU GY A-1 GZ G GX A-1 G G GU GX A-2 GY B-2 CONTENTS BY DESIGNATION SOMMAIRE PAR DESIGNATION IEC CEI
Lampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler
Dansk standard Tillæg DS/EN 60061-1/A41 (elektronisk) 1. udgave 2010-06-24 Lampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler Lamp caps and holders together
Læs mereLampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler
Dansk standard Tillæg DS/EN 60061-1/A47 (elektronisk) 1. udgave 2012-04-23 Lampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler Lamp caps and holders together
Læs mereDansk standard DS/EN ISO udgave Campingtelte. Camping tents
Dansk standard DS/EN ISO 5912 2. udgave 2011-11-22 Campingtelte Camping tents DS/EN ISO 5912 København DS projekt: M245636 ICS: 97.200.30 Første del af denne publikations betegnelse er: DS/EN ISO, hvilket
Læs mereTekniske specifikationer for centrifugalpumper Klasse III
Dansk standard Tillæg DS/EN ISO 9908/A1 1. udgave 2011-06-08 Tekniske specifikationer for centrifugalpumper Klasse III Technical specifications for centrifugal pumps Class III Amendment 1 DS/EN ISO 9908/A1
Læs mereMaskinsikkerhed Elektrisk udstyr på maskiner Del 1: Generelle krav
Dansk standard Tillæg DS/EN 60204-1/A1 1. udgave 2009-03-13 Maskinsikkerhed Elektrisk udstyr på maskiner Del 1: Generelle krav Safety of machinery Electrical equipment of machines Part 1: General requirements
Læs merePulvermaling Del 7: Bestemmelse af massetab efter ophedning i ovn
Dansk standard DS/EN ISO 8130-7 1. udgave 2011-01-21 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 8130-7:2011 Pulvermaling Del 7: Bestemmelse af massetab efter ophedning
Læs mereKosmetik Metoder til prøvning af solbeskyttelse In vivo-bestemmelse af UVA-beskyttelse
Dansk standard DS/EN ISO 24442 1. udgave 2012-02-01 Kosmetik Metoder til prøvning af solbeskyttelse In vivo-bestemmelse af UVA-beskyttelse Cosmetics Sun protection test methods In vivo determination of
Læs mereElektrostatik Del 4-1: Standardprøvningsmetoder. anvendelser Gulvbelægningers og monterede gulves elektrostatiske egenskaber
Dansk standard Tillæg DS/EN 61340-4-1:2004/A1:2015 1. udgave 2015-06-23 Elektrostatik Del 4-1: Standardprøvningsmetoder for specifikke anvendelser Gulvbelægningers og monterede gulves elektrostatiske egenskaber
Læs merePapir og karton Bestemmelse af tykkelse, densitet og massevolumen
Dansk standard DS/EN ISO 534 1. udgave 2012-01-04 Papir og karton Bestemmelse af tykkelse, densitet og massevolumen Paper and board Determination of thickness, density and specific volume DS/EN ISO 534
Læs mereCentrale strømforsyningssystemer
Dansk Standard DS/EN 50171 1. udgave 2001-08-29 Centrale strømforsyningssystemer Central power supply systems DS/EN 50171 København DS projekt: 30769 ICS: 29.200 Deskriptorer: belysning til nødudgang,elektriske
Læs mereKrydderier og smagsstoffer Botanisk nomenklatur
Dansk standard DS/EN ISO 676 1. udgave 2009-07-23 Krydderier og smagsstoffer Botanisk nomenklatur Spices and condiments Botanical nomenclature DS/EN ISO 676 København DS projekt: M230052 ICS: 01.040.67;
Læs mereLampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 2: Lampefatninger
Dansk standard Tillæg DS/EN 60061-2/A47 1. udgave 2014-05-28 Lampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 2: Lampefatninger Lamp caps and holders together with
Læs mereMajs Bestemmelse af vandindhold (i forarbejdet korn og i hele korn)
Dansk standard DS/EN ISO 6540 1. udgave 2010-06-23 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 6540:2010 Majs Bestemmelse af vandindhold (i forarbejdet korn og i hele
Læs merePlast Bestemmelse af termoplasts massesmelteindeks (MFR) og volumensmelteindeks (MVR) Del 1: Standardmetode
Dansk standard DS/EN ISO 1133-1 1. udgave 2012-01-25 Plast Bestemmelse af termoplasts massesmelteindeks (MFR) og volumensmelteindeks (MVR) Del 1: Standardmetode Plastics Determination of the melt mass-flow
Læs mereMaintenance Documentation for maintenance
Dansk standard DS/EN 13460 3. udgave 2009-12-15 Vedligehold Dokumentation for vedligehold Maintenance Documentation for maintenance DS/EN 13460 København DS projekt: M245239 ICS: 01.110; 21.020 Første
Læs mereTeknisk tegning Flowdiagrammer til procesanlæg Generelle regler
Dansk Standard DS/EN ISO 10628 1. udgave Godkendelsesblad Godkendt:2001-04-06 Teknisk tegning Flowdiagrammer til procesanlæg Generelle regler Flow diagrams for process plants General rules DANSK STANDARD
Læs mereDansk standard DS/EN Risk management Risk assessment techniques. 1. udgave
Dansk standard DS/EN 31010 1. udgave 2010-05-20 Risikoledelse Teknikker til risikovurdering Risk management Risk assessment techniques DS/EN 31010 København DS projekt: M231261 ICS: 03.100.01 Første del
Læs merePalmeolie Bestemmelse af indeks for forringelse af blegningsevne (DOBI) samt bestemmelse af karotinindhold
Dansk standard DS/EN ISO 17932 2. udgave 2011-11-07 Palmeolie Bestemmelse af indeks for forringelse af blegningsevne (DOBI) samt bestemmelse af karotinindhold Palm oil Determination of the deterioration
Læs mereTemperature Electromotive force (EMF) tables for pure-element thermocouple combinations
Dansk standard DS/EN 62460 1. udgave 2008-10-14 Temperatur Elektromotorisk kraft (EMF) Tabeller for kombinationer af rene termoelementer Temperature Electromotive force (EMF) tables for pure-element thermocouple
Læs mereBatchstyring Del 1: Modeller og terminologi
Dansk Standard DS/EN 61512-1 1. udgave 2001-08-29 Batchstyring Del 1: Modeller og terminologi Batch control Part 1: Models and terminology DS/EN 61512-1 København DS projekt: 26009 ICS: 25.040.40 Deskriptorer:
Læs mereKapslingsklasser (IP-kode)
Dansk Standard DS/EN 60529+A1 1. udgave 2002-04-05 Kapslingsklasser (IP-kode) Degrees of protection provided by enclosures (IP Code) DS/EN 60529+A1 København DS projekt: 47050 ICS: 29.020 Deskriptorer:
Læs mereDansk standard DS/EN Weibull analysis. 1. udgave
Dansk standard DS/EN 61649 1. udgave 2008-12-10 Weilbull-analyse Weibull analysis DS/EN 61649 København DS projekt: M219606 ICS: 03.120.30 Første del af denne publikations betegnelse er: DS/EN, hvilket
Læs mereCold rolled narrow steel strip Tolerances on dimensions and shape
Dansk standard DS/EN 10140 3. udgave 2009-06-02 Koldvalset båndstål Tolerancer for dimensioner og form Cold rolled narrow steel strip Tolerances on dimensions and shape DS/EN 10140 København DS projekt:
Læs mereFritidsbåde Komfurer til flydende brændsel
Dansk standard DS/EN ISO 14895 1. udgave 2003-04-11 Fritidsbåde Komfurer til flydende brændsel Small craft Liquid-fuelled galley stoves DS/EN ISO 14895 København DS projekt: 47074 ICS: 47.080 Deskriptorer:
Læs mereUdstyr til tilslutning af belysningsarmaturer til husholdningsbrug o.l. Del 2: Normblade for DCL
Dansk standard DS/EN 61995-2 1. udgave 2009-06-10 Udstyr til tilslutning af belysningsarmaturer til husholdningsbrug o.l. Del 2: Normblade for DCL Devices for the connection of luminaires for household
Læs mereMalinger og lakker Belysning og procedure for visuel vurdering af belægninger
Dansk standard DS/EN ISO 13076 1. udgave 2012-08-10 Malinger og lakker Belysning og procedure for visuel vurdering af belægninger Paints and varnishes Lighting and procedure for visual assessments of coatings
Læs mereGeometriske produktspecifikationer (GPS) Længdemåleudstyr højdemålere Design og metrologiske karakteristika
Dansk standard DS/EN ISO 13225 1. udgave 2012-05-23 Geometriske produktspecifikationer (GPS) Længdemåleudstyr højdemålere Design og metrologiske karakteristika Geometrical product specifications (GPS)
Læs mereSlanger og rør af gummi og plast Måling af fleksibilitet og stivhed Del 2: Bøjeprøvning ved lavere temperaturer end rumtemperatur
Dansk standard DS/EN ISO 10619-2 1. udgave 2012-01-24 Slanger og rør af gummi og plast Måling af fleksibilitet og stivhed Del 2: Bøjeprøvning ved lavere temperaturer end rumtemperatur Rubber and plastics
Læs mereMobil og bærbar DVB-T/H-radiotilslutning Del 2: Grænsefladeoverensstemmelsesprøvning
Dansk standard DS/EN 62002-2 1. udgave 2006-12-12 Mobil og bærbar DVB-T/H-radiotilslutning Del 2: Grænsefladeoverensstemmelsesprøvning Mobile and portable DVB-T/H radio access Part 2: Interface conformance
Læs mereGrænseflade for digital lyd Del 1: Generelt
Dansk standard Tillæg DS/EN 60958-1/A1 1. udgave 2014-09-02 Grænseflade for digital lyd Del 1: Generelt Digital audio interface Part 1: General DS/EN 60958-1/A1 København DS projekt: M277911 ICS: 33.160.30
Læs mereFaste modstande til brug i elektronisk udstyr Del 1: Generisk specifikation
Dansk standard Tillæg DS/EN 60115-1:2011/ A11:2015 1. udgave 2015-05-18 Faste modstande til brug i elektronisk udstyr Del 1: Generisk specifikation Fixed resistors for use in electronic equipment Part
Læs mereMiljøledelsessystemer Kravbeskrivelse med råd om anvendelse
Dansk standard DS/EN ISO 14001 2. udgave 2004-11-30 Miljøledelsessystemer Kravbeskrivelse med råd om anvendelse Environmental management systems Requirements with guidance for use DS/EN ISO 14001 København
Læs mereLoddefri forbindelser Del 2: Krimpede forbindelser Generelle krav, prøvningsmetoder og praktisk vejledning
Dansk standard Tillæg DS/EN 60352-2/A1 1. udgave 2013-09-26 Loddefri forbindelser Del 2: Krimpede forbindelser Generelle krav, prøvningsmetoder og praktisk vejledning Solderless connections Part 2: Crimped
Læs mereDansk standard DS/EN Loft ladders Requirements, marking and testing. 1. udgave
Dansk standard DS/EN 14975 1. udgave 2007-02-26 Loftstiger Krav, mærkning og prøvning Loft ladders Requirements, marking and testing DS/EN 14975 København DS projekt: 55746 ICS: 97.145 Første del af denne
Læs merePrøvningsmetoder til hjælpekomponenter til murværk Del 4: Bestemmelse af lastkapacitet og lastnedbøjning i bjælkesko
Dansk standard DS/EN 846-4 + A1 2. udgave 2002-12-04 Prøvningsmetoder til hjælpekomponenter til murværk Del 4: Bestemmelse af lastkapacitet og lastnedbøjning i bjælkesko Methods of test for ancillary components
Læs mereGrænseflade for digital lyd Del 1: Generelt
Dansk standard DS/EN 60958-1 3. udgave 2008-10-31 Grænseflade for digital lyd Del 1: Generelt Digital audio interface Part 1: General DS/EN 60958-1 København DS projekt: M222433 ICS: 33.160.30 Første del
Læs mereMultimedia quality Method of assessment of synchronization of audio and video
Dansk standard DS/EN 62503 1. udgave 2008-10-31 Multimediekvalitet Metode til fastsættelse af synkronisering mellem lyd og billede Multimedia quality Method of assessment of synchronization of audio and
Læs mereForkoblingsenheder for lysstofrør Krav til ydeevne
Dansk standard DS/EN 60921 2. udgave 2005-02-10 Forkoblingsenheder for lysstofrør Krav til ydeevne Ballasts for tubular fluorescent lamps Performance requirements DS/EN 60921 København DS projekt: 49567
Læs mereStyring af rumfartsprojekter. Generelle krav. Del 1: Politik og principper
Dansk Standard DS/EN 13290-1 1. udgave Godkendt:2000-04-13 Styring af rumfartsprojekter. Generelle krav. Del 1: Politik og principper Space project management - General requirements - Part 1: Policy and
Læs mereLegepladsredskaber og -underlag Del 11: Tredimensionelle klatrenet Supplerende specifikke sikkerhedskrav og prøvningsmetoder
Dansk standard DS/EN 1176-11 2. udgave 2009-04-22 Legepladsredskaber og -underlag Del 11: Tredimensionelle klatrenet Supplerende specifikke sikkerhedskrav og prøvningsmetoder Playground equipment and surfacing
Læs mereLedelse af pålidelighedsaktiviteter Del 3-11: Anvendelsesvejledning Pålidelighedscentreret vedligehold (RCM)
Dansk standard DS/EN 60300-3-11 1. udgave 2009-12-10 Ledelse af pålidelighedsaktiviteter Del 3-11: Anvendelsesvejledning Pålidelighedscentreret vedligehold (RCM) Dependability management Part 3-11: Application
Læs mereControl technology Rules for the designation of measuring instruments
Dansk standard DS/EN 62419 1. udgave 2009-03-10 Styringsteknologi Regler for benævnelse af måleinstrumenter Control technology Rules for the designation of measuring instruments DS/EN 62419 København DS
Læs mereIkke-destruktiv prøvning Lækprøvning Kriterier for valg af metode og teknik
Dansk Standard DS/EN 1779 2. udgave 2001-10-26 Ikke-destruktiv prøvning Lækprøvning Kriterier for valg af metode og teknik Non-destructive testing Leak testing Criteria for method and technique selection
Læs mereElproducerende vindmøller Del 25-3: Kommunikationssystemer til overvågning og styring af vindmølleparker Modeller for informationsudveksling
Dansk standard DS/EN 61400-25-3 1. udgave 2007-04-27 Elproducerende vindmøller Del 25-3: Kommunikationssystemer til overvågning og styring af vindmølleparker Modeller for informationsudveksling Wind turbines
Læs mereJernbaneanvendelser Datakommunikation, signallering og databehandling Del 1: Sikkerhedsrelateret kommunikation i lukkede transmissionssystemer
Dansk Standard DS/EN 50159-1 1. udgave 2001-10-31 Jernbaneanvendelser Datakommunikation, signallering og databehandling Del 1: Sikkerhedsrelateret kommunikation i lukkede transmissionssystemer Railway
Læs mereMatematiske udtryk for pålidelighed, tilgængelighed og vedligehold samt for understøttelse af vedligehold
Dansk Standard DS/EN 61703 1. udgave 2002-05-01 Matematiske udtryk for pålidelighed, tilgængelighed og vedligehold samt for understøttelse af vedligehold Mathematical expressions for reliability,availability,
Læs mereHalvlederelementer Mekaniske og klimatiske prøvningsmetoder Del 33: Accelereret fugtbestandighed Objektiv autoklav
Dansk standard DS/EN 60749-33 1. udgave 2004-04-29 Halvlederelementer Mekaniske og klimatiske prøvningsmetoder Del 33: Accelereret fugtbestandighed Objektiv autoklav Semiconductor devices Mechanical and
Læs mereGrænseflade for digital lysstyring (DALI) Del 208: Særlige krav til kontroludstyr Omskifterfunktion (udstyrstype 7)
Dansk standard DS/EN 62386-208 1. udgave 2009-09-22 Grænseflade for digital lysstyring (DALI) Del 208: Særlige krav til kontroludstyr Omskifterfunktion (udstyrstype 7) Digital addressable lighting Interface
Læs mereIntegration af virksomhedens styringssystem Del 1: Modeller og terminologi
Dansk standard DS/EN 62264-1 1. udgave 2008-02-01 Integration af virksomhedens styringssystem Del 1: Modeller og terminologi Enterprise-control system integration DS/EN 62264-1 København DS projekt: M222179
Læs mereAudioudstyr og audiovisuelt udstyr Digitale audiodele Grundlæggende metoder til måling af audiokarakteristika Del 3: Professionel brug
Dansk standard DS/EN 61606-3 1. udgave 2008-12-12 Audioudstyr og audiovisuelt udstyr Digitale audiodele Grundlæggende metoder til måling af audiokarakteristika Del 3: Professionel brug Audio and audiovisual
Læs mereHøjspændingskoblingsudstyr Del 102: Højspændingsadskillere og jordsluttere til vekselstrøm
Dansk standard Tillæg DS/EN 62271-102/A2 1. udgave 2013-06-07 Højspændingskoblingsudstyr Del 102: Højspændingsadskillere og jordsluttere til vekselstrøm High-voltage switchgear and controlgear Part 102:
Læs mereEurocode 1: Last på bærende konstruktioner Del 1-3: Generelle laster Snelast
Dansk standard DS/EN 1991-1-3 2. udgave 2007-06-22 Eurocode 1: Last på bærende konstruktioner Del 1-3: Generelle laster Snelast Eurocode 1 Actions on structures Part 1-3: General actions - Snow loads DS/EN
Læs mereDansk standard DS/EN
Dansk standard DS/EN 60512-16-4 1. udgave 2008-09-26 Konnektorer til elektronisk udstyr Prøvninger og målinger Del 16-4: Mekaniske prøvninger på kontakter og afslutninger Prøvning 16d: Brudstyrke (krimpede
Læs mereDansk standard DS/EN
Dansk standard DS/EN 60512-16-5 1. udgave 2008-11-07 Konnektorer til elektronisk udstyr Prøvninger og målinger Del 16-5: Mekaniske prøvninger af kontakter og afslutninger Prøvning 16e: Tilbagetrækningskraft
Læs mereEnergiledelsessystemets grænseflade til applikationsprogrammer (EMS-API) Del 453: CIM-baseret grafisk udveksling
Dansk standard DS/EN 61970-453 1. udgave 2008-09-26 Energiledelsessystemets grænseflade til applikationsprogrammer (EMS-API) Del 453: CIM-baseret grafisk udveksling Energy management system application
Læs mereRotordynamiske pumper Godkendelsesprøvning af hydraulisk ydeevne Klasse 1, 2 og 3
Dansk standard DS/EN ISO 9906 2. udgave 2012-06-08 Rotordynamiske pumper Godkendelsesprøvning af hydraulisk ydeevne Klasse 1, 2 og 3 Rotodynamic pumps Hydraulic performance acceptance tests Grades 1, 2
Læs mereWc-kummer og wc-møbler Tilslutningsdimensioner
Dansk standard DS/EN 33 3. udgave 2011-10-03 Wc-kummer og wc-møbler Tilslutningsdimensioner WC pans and WC suites Connecting dimensions DS/EN 33 København DS projekt: M235262 ICS: 91.140.70 Første del
Læs mereKlassifikation og betegnelse af dokumenter for fabriksanlæg, anlæg og udstyr Del 1: Regler og klassifikationstabeller
Dansk standard DS/EN 61355-1 2. udgave 2008-07-04 Klassifikation og betegnelse af dokumenter for fabriksanlæg, anlæg og udstyr Del 1: Regler og klassifikationstabeller Classification and designation of
Læs mereTilsatsmaterialer til svejsning Pulverfyldte elektroder til metallysbuesvejsning
Dansk standard DS/EN ISO 12153 1. udgave 2012-06-08 Tilsatsmaterialer til svejsning Pulverfyldte elektroder til metallysbuesvejsning med eller uden beskyttelsesgas af nikkel og nikkellegeringer Klassifikation
Læs mereFacility Management Del 2: Vejledning i udarbejdelse af Facility Management-aftaler
Dansk standard DS/EN 15221-2 2. udgave 2008-06-30 Facility Management Del 2: Vejledning i udarbejdelse af Facility Management-aftaler Facility Management Part 2: Guidance on how to prepare Facility Management
Læs mereElmålingsudstyr (vekselstrøm) Særlige krav Del 23: Statiske målere til reaktiv energi (klasse 2 og 3)
Dansk standard DS/EN 62053-23 1. udgave 2003-04-11 Elmålingsudstyr (vekselstrøm) Særlige krav Del 23: Statiske målere til reaktiv energi (klasse 2 og 3) Electricity metering equipment (a.c.) Particular
Læs mereSolcelleanlæg Termer, definitioner og symboler
DS-information DS/CLC/TS 61836 1. udgave 2009-06-26 Solcelleanlæg Termer, definitioner og symboler Solar photovoltaic energy systems Terms, definitions and symbols DS/CLC/TS 61836 København DS projekt:
Læs mereEurocode 7: Geoteknik Del 1: Generelle regler
Dansk standard Tillæg DS/EN 1997-1/A1 1. udgave 2014-02-03 Eurocode 7: Geoteknik Del 1: Generelle regler Eurocode 7: Geotechnical design Part 1: General rules DS/EN 1997-1/A1 København DS projekt: M267839
Læs merePrintkort og printkortsamlinger Konstruktion og brug Del 7: 0-orientering af elektroniske komponenter til opbygning af CADbibliotek
Dansk standard DS/EN 61188-7 1. udgave 2009-07-24 Printkort og printkortsamlinger Konstruktion og brug Del 7: 0-orientering af elektroniske komponenter til opbygning af CADbibliotek Printed boards and
Læs mereStørrelser og enheder Del 13: Informationsvidenskab og -teknologi
Dansk standard DS/EN 80000-13 1. udgave 2008-08-22 Størrelser og enheder Del 13: Informationsvidenskab og -teknologi Quantities and units Part 13: Information science and technology DS/EN 80000-13 København
Læs mereAudioudstyr og audiovisuelt udstyr Digitale audiodele Grundlæggende metoder til måling af audiokarakteristika Del 4: Personlig computer
Dansk standard DS/EN 61606-4 1. udgave 2007-02-08 Audioudstyr og audiovisuelt udstyr Digitale audiodele Grundlæggende metoder til måling af audiokarakteristika Del 4: Personlig computer Audio and audiovisual
Læs mereLedere af isolerende kabler
Dansk standard Rettelsesblad DS/EN 60228/AC:2005 1. udgave Ledere af isolerende kabler Conductors of insulated cables DS/EN 60228/AC:2005 København DS projekt: M290250 ICS: 29.060.01 Første del af denne
Læs merePackaging Flexible plastic/metal laminate tubes Dimensions and tolerances of nozzle S 13
Dansk standard DS/EN 14979 1. udgave 2006-03-31 Emballage Fleksible laminattuber af plast/metal Dimensioner og tolerancer for dyse S 13 Packaging Flexible plastic/metal laminate tubes Dimensions and tolerances
Læs mereLavspændingssikringer Del 1: Generelle krav
Dansk standard DS/EN 60269-1 3. udgave 2007-06-19 Lavspændingssikringer Del 1: Generelle krav Low-voltage fuses Part 1: General requirements DS/EN 60269-1 København DS projekt: M205966 ICS: 29.120.50 Første
Læs mereDansk standard DS/EN
Dansk standard DS/EN 60534-2-5 1. udgave 2003-12-22 Reguleringsventiler til industrielle processer Del 2-5: Gennemstrømningskapacitet Dimensionsligninger for væskestrømme gennem flertrinsreguleringsventiler
Læs mereidentifikation Betjeningsprincipper
Dansk standard DS/EN 60447 1. udgave 2005-03-01 Grundlæggende principper og sikkerhedsprincipper for mandmaskine-grænseflade, mærkning og identifikation Betjeningsprincipper Basic and safety principles
Læs mereLedningskanal- og kabelkanalsystemer til elektriske installationer Del 1: Generelle krav
Dansk standard Tillæg DS/EN 50085-1/A1 1. udgave 2013-08-14 Ledningskanal- og kabelkanalsystemer til elektriske installationer Del 1: Generelle krav Cable trunking systems and cable ducting systems for
Læs mereHalvlederelementer Del 16-3: Integrerede kredse til mikrobølger Frekvensomformere
Dansk standard DS/EN 60747-16-3 1. udgave 2002-09-23 Halvlederelementer Del 16-3: Integrerede kredse til mikrobølger Frekvensomformere Semiconductor devices Part 16-3: Microwave integrated circuits Frequency
Læs mereBogstavsymboler til brug i elektroteknologi Del 2: Telekommunikation og elektronik
Dansk standard DS/EN 60027-2 1. udgave 2007-05-15 Bogstavsymboler til brug i elektroteknologi Del 2: Telekommunikation og elektronik Letter symbols to be used in electrical technology Part 2: Telecommunications
Læs mereInstrumenttransformere Del 8: Elektroniske strømtransformere
Dansk standard DS/EN 60044-8 1. udgave 2002-10-24 Instrumenttransformere Del 8: Elektroniske strømtransformere Instrument transformers - Part 8: Electronic current transformers DS/EN 60044-8 København
Læs mereIndustrial systems, installations and equipment and industrial products Labelling of cables and cores
Dansk standard DS/EN 62491 1. udgave 2009-01-20 Industrisystemer, installationer og udstyr samt industriprodukter Mærkning af kabler og ledninger Industrial systems, installations and equipment and industrial
Læs mereFysiske størrelser og enheder Del 14: Telebiometri relateret til human fysiologi
Dansk standard DS/EN 80000-14 1. udgave 2009-05-27 Fysiske størrelser og enheder Del 14: Telebiometri relateret til human fysiologi Quantities and units Part 14: Telebiometrics related to human physiology
Læs mereVedligehold af udstyr Del 3: Verifikation og indsamling, analyse og præsentation af data
Dansk standard DS/EN 60706-3 1. udgave 2007-02-02 Vedligehold af udstyr Del 3: Verifikation og indsamling, analyse og præsentation af data Maintainability of equipment Part 3: Verification and collection,
Læs mereBrændselsceller Del 3-3: Stationære brændselscellesystemer Installation
Dansk standard DS/EN 62282-3-3 1. udgave 2008-03-25 Brændselsceller Del 3-3: Stationære brændselscellesystemer Installation Fuel cell technologies Part 3-3: Stationary fuel cell power systems Installation
Læs mereKøkkengrej Grafiske symboler (piktogrammer)
Dansk standard DS/EN 14916 1. udgave 2005-11-14 Køkkengrej Grafiske symboler (piktogrammer) Domestic cookware Graphical symbols (pictograms) DS/EN 14916 København DS projekt: 55114 ICS: 01.080.20; 97.040.60
Læs mereBordtennis Del 2: Netstolper Krav og prøvningsmetoder
Dansk standard DS/EN 14468-2:2015 2. udgave 2015-04-29 Bordtennis Del 2: Netstolper Krav og prøvningsmetoder Table tennis Part 2: Posts for net assemblies Requirements and test methods DS/EN 14468-2:2015
Læs mereKontormøbler Kontorstole Del 1: Mål Bestemmelse af dimensioner
Dansk Standard DS/EN 1335-1 2. udgave Godkendt: 2001-02-21 Kontormøbler Kontorstole Del 1: Mål Bestemmelse af dimensioner Office furniture Office work chair Part 1: Dimensions Determination of dimensions
Læs mereDansk standard DS/EN 13429. Packaging Reuse. 3. udgave 2006-10-12
Dansk standard DS/EN 13429 3. udgave 2006-10-12 Emballage Genbrug Packaging Reuse DS/EN 13429 København DS projekt: M215981 ICS: 13.030.50; 55.020 Første del af denne publikations betegnelse er: DS/EN,
Læs mereSuperledning Del 10: Måling af kritisk temperatur Kritisk temperatur for sammensatte superledere målt ved en modstandsmetode
Dansk standard DS/EN 61788-10 2. udgave 2006-12-11 Superledning Del 10: Måling af kritisk temperatur Kritisk temperatur for sammensatte superledere målt ved en modstandsmetode Superconductivity Part 10:
Læs mereMaskinsikkerhed Permanente adgangsveje til maskinanlæg Del 4: Faste stiger
Dansk standard Tillæg DS/EN ISO 14122-4/A1 1. udgave 2010-10-19 Maskinsikkerhed Permanente adgangsveje til maskinanlæg Del 4: Faste stiger Safety of machinery Permanent means of access to machinery Part
Læs mereAkustik Deklarering og verificering af støj fra maskiner og udstyr
Dansk standard DS/EN ISO 4871 2. udgave 2009-09-09 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 4871:2009 Akustik Deklarering og verificering af støj fra maskiner og udstyr
Læs mereVinduer og døre Vandtæthed Klassifikation
Dansk Standard DS/EN 12208 1. udgave Godkendt:2000-12-29 Vinduer og døre Vandtæthed Klassifikation Windows and doors Watertightness Classification DANSK STANDARD - Eftertryk uden tilladelse forbudt Kollegievej
Læs mereGasfyrede tørretumblere af type B med en nominel belastning, der ikke overstiger 20 kw Del 2: Rationel energiudnyttelse
Dansk Standard DS/EN 12752-2 2. udgave 2001-11-09 Gasfyrede tørretumblere af type B med en nominel belastning, der ikke overstiger 20 kw Del 2: Rationel energiudnyttelse Gas-fired tumble dryers of type
Læs mereDansk standard DS/EN
Dansk standard DS/EN 61937-6 2. udgave 2006-09-12 Digital lyd - Grænseflade for ulineær PCM-kodet bitstrøm, der overholder IEC 60958 Del 6: Ulineære PCM-bitstrømme i henhold til MPEG-2-AAC- og MPEG-4-
Læs mereSpecifikation og kvalificering af svejseprocedurer for metalliske materialer Kvalificering ved godkendelse af en standardsvejseprocedure
Dansk standard DS/EN ISO 15612 2. udgave 2005-12-22 Specifikation og kvalificering af svejseprocedurer for metalliske materialer Kvalificering ved godkendelse af en standardsvejseprocedure Specification
Læs mereAssessment of lighting equipment related to human exposure to electromagnetic fields
Dansk standard DS/EN 62493 1. udgave 2010-02-26 Vurdering af belysningsudstyr med hensyn til personeksponering for elektromagnetiske felter Assessment of lighting equipment related to human exposure to
Læs mereNuclear power plants Control rooms Design
Dansk standard DS/EN 60964 1. udgave 2010-04-09 Kernekraftværker Kontrolrum Design Nuclear power plants Control rooms Design DS/EN 60964 København DS projekt: M245247 ICS: 27.120.20 Første del af denne
Læs merePålidelighedssortering under stress Del 1: Reparable produkter fremstillet i partier
Dansk standard DS/EN 61163-1 1. udgave 2007-02-01 Pålidelighedssortering under stress Del 1: Reparable produkter fremstillet i partier Reliability stress screening Part 1: Repairable assemblies manufactured
Læs mereApplikationsintegration på elværker Systemgrænseflader til distributionsstyring
Dansk standard DS/EN 61968-9 1. udgave 2010-02-19 Applikationsintegration på elværker Systemgrænseflader til distributionsstyring Del 9: Grænseflade til måleraflæsning og -styring Application integration
Læs mereMiljøprøvninger Del 2-82: Prøvninger Tx-prøvning: Whisker-prøvningsmetoder til elektroniske og elektriske komponenter
Dansk standard DS/EN 60068-2-82 1. udgave 2007-07-02 Miljøprøvninger Del 2-82: Prøvninger Tx-prøvning: Whisker-prøvningsmetoder til elektroniske og elektriske komponenter Environmental testing Part 2-82:
Læs mereMiljømærkning Egendeklaration af miljøpåstande (Type II miljømærkning)
Dansk standard Tillæg DS/EN ISO 14021/A1 1. udgave 2012-02-08 Miljømærkning Egendeklaration af miljøpåstande (Type II miljømærkning) Environmental labels and declarations Self-declared environmental claims
Læs mereCrystalline silicon terrestrial photovoltaic (PV) modules Design qualification and type approval
Dansk standard DS/EN 61215 2. udgave 2005-06-30 Krystallinske silicium-moduler til anvendelse på jorden Konstruktionskvalifikation og typegodkendelse Crystalline silicon terrestrial photovoltaic (PV) modules
Læs mereidentifikation Identifikation af ledere ved farver eller cifre
Dansk standard DS/EN 60446 2. udgave 2007-07-25 Grundlæggende principper og sikkerhedsprincipper for mandmaskine-interface, mærkning og identifikation Identifikation af ledere ved farver eller cifre Basic
Læs mere