Geometriske produktspecifikationer (GPS) Grundlæggende begreber, principper og regler
|
|
- Bertha Nøhr
- 5 år siden
- Visninger:
Transkript
1 Dansk standard DS/EN ISO udgave Geometriske produktspecifikationer (GPS) Grundlæggende begreber, principper og regler Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules
2 DS/EN ISO 8015 København DS projekt: M ICS: Første del af denne publikations betegnelse er: DS/EN ISO, hvilket betyder, at det er en international standard, der har status både som europæisk og dansk standard. Denne publikations overensstemmelse er: IDT med: ISO 8015:2011. IDT med: EN ISO 8015:2011. DS-publikationen er på engelsk. Denne publikation erstatter: DS/ISO 8015:1990. DS-publikationstyper Dansk Standard udgiver forskellige publikationstyper. Typen på denne publikation fremgår af forsiden. Der kan være tale om: Dansk standard standard, der er udarbejdet på nationalt niveau, eller som er baseret på et andet lands nationale standard, eller standard, der er udarbejdet på internationalt og/eller europæisk niveau, og som har fået status som dansk standard DS-information publikation, der er udarbejdet på nationalt niveau, og som ikke har opnået status som standard, eller publikation, der er udarbejdet på internationalt og/eller europæisk niveau, og som ikke har fået status som standard, fx en teknisk rapport, eller europæisk præstandard DS-håndbog samling af standarder, eventuelt suppleret med informativt materiale DS-hæfte publikation med informativt materiale Til disse publikationstyper kan endvidere udgives tillæg og rettelsesblade DS-publikationsform Publikationstyperne udgives i forskellig form som henholdsvis fuldtekstpublikation (publikationen er trykt i sin helhed) godkendelsesblad (publikationen leveres i kopi med et trykt DS-omslag) elektronisk (publikationen leveres på et elektronisk medie) DS-betegnelse Alle DS-publikationers betegnelse begynder med DS efterfulgt af et eller flere præfikser og et nr., fx DS 383, DS/EN 5414 osv. Hvis der efter nr. er angivet et A eller Cor, betyder det, enten at det er et tillæg eller et rettelsesblad til hovedstandarden, eller at det er indført i hovedstandarden. DS-betegnelse angives på forsiden. Overensstemmelse med anden publikation: Overensstemmelse kan enten være IDT, EQV, NEQ eller MOD IDT: Når publikationen er identisk med en given publikation. EQV: Når publikationen teknisk er i overensstemmelse med en given publikation, men præsentationen er ændret. NEQ: Når publikationen teknisk eller præsentationsmæssigt ikke er i overensstemmelse med en given standard, men udarbejdet på baggrund af denne. MOD: Når publikationen er modificeret i forhold til en given publikation.
3 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN ISO 8015 June 2011 ICS English Version Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) Spécification géométrique des produits (GPS) - Principes fondamentaux - Concepts, principes et règles (ISO 8015:2011) This European Standard was approved by CEN on 18 May Geometrische Produktspezifikation (GPS) - Grundlagen - Konzepte, Prinzipien und Regeln (ISO 8015:2011) CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 8015:2011: E
4 EN ISO 8015:2011 (E) Contents Page Foreword...3 2
5 EN ISO 8015:2011 (E) Foreword This document (EN ISO 8015:2011) has been prepared by Technical Committee ISO/TC 213 Dimensional and geometrical product specifications and verification in collaboration with Technical Committee CEN/TC 290 Dimensional and geometrical product specification and verification the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2011, and conflicting national standards shall be withdrawn at the latest by December Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 8015:2011 has been approved by CEN as a EN ISO 8015:2011 without any modification. 3
6
7 INTERNATIONAL STANDARD ISO 8015 Second edition Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules Spécification géométrique des produits (GPS) Principes fondamentaux Concepts, principes et règles Reference number ISO 8015:2011(E) ISO 2011
8 ISO 8015:2011(E) COPYRIGHT PROTECTED DOCUMENT ISO 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel Fax copyright@iso.org Web Published in Switzerland ii ISO 2011 All rights reserved
9 ISO 8015:2011(E) Contents Page Foreword...iv Introduction...v 1 Scope Normative references Terms and definitions Fundamental assumptions for the reading of specifications on drawings General Functional limits Tolerance limits Workpiece functional level Fundamental principles Invocation principle Principle of GPS standard hierarchy Definitive drawing principle Feature principle Independency principle Decimal principle Default principle Reference condition principle Rigid workpiece principle Duality principle Functional control principle General specification principle Responsibility principle Rules for indication of default specification operators General General ISO default GPS specification Altered default GPS specification Rules for indication of special specification operators General Added complementary information (requirements) to the ISO basic specification Rules for statements in parentheses...8 Annex A (informative) Relation to the GPS matrix model...9 Bibliography...10 ISO 2011 All rights reserved iii
10 ISO 8015:2011(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 8015 was prepared by Technical Committee ISO/TC 213, Dimensional and geometrical product specifications and verification. This second edition cancels and replaces the first edition (ISO 8015:1985), which has been technically revised. iv ISO 2011 All rights reserved
11 ISO 8015:2011(E) Introduction This International Standard is a geometrical product specification (GPS) standard and is to be regarded as a fundamental GPS standard (see ISO/TR 14638). It influences all other standards in the GPS matrix system, i.e. all global, general and supplementary standards, as well as any other kind of document in the GPS matrix system. For more detailed information of the relation of this International Standard to other standards and the GPS matrix model, see Annex A. This International Standard covers a number of fundamental principles that apply to all GPS standards and technical product documentation that is based on the GPS matrix system. Until this current version of this International Standard was published, these principles were implied, but not formulated explicitly. This International Standard also covers the indication of ISO default specification operators and particularly the indication of non-default specification operators, either by direct indication or by the use of companyspecific or drawing-specific defaults. For the purpose of this International Standard, a concept is considered as an abstract idea, a principle is considered as a standardized truth based on concepts upon which rules are based, and a rule is considered as a standardized procedure (for action). ISO 2011 All rights reserved v
12
13 INTERNATIONAL STANDARD ISO 8015:2011(E) Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules 1 Scope This International Standard specifies fundamental concepts, principles and rules valid for the creation, interpretation and application of all other International Standards, Technical Specifications and Technical Reports concerning dimensional and geometrical product specifications (GPS) and verification. This International Standard applies to the interpretation of GPS indications on all types of drawings. For the purposes of this International Standard, the term drawing is to be interpreted in the broadest possible sense, encompassing the total package of documentation specifying the workpiece. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO : 1), Geometrical product specifications (GPS) General concepts Part 1: Model for geometrical specification and verification ISO : 2), Geometrical product specifications (GPS) General concepts Part 2: Basic tenets, specifications, operators and uncertainties ISO/IEC Guide 98-3:2008, Uncertainty of measurement Guide to the expression of uncertainty in measurement (GUM:1995) ISO/IEC Guide 99:2007, International vocabulary of metrology Basic and general concepts and associated terms (VIM) 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO , ISO , ISO/IEC Guide 98-3, ISO/IEC Guide 99 and the following apply. 3.1 ISO GPS system GPS system geometrical product specification and verification system developed in ISO by ISO/TC 213 1) To be published. (Revision of ISO/TS :2005) 2) To be published. (Revision of ISO/TS :2002) ISO 2011 All rights reserved 1
Dansk standard DS/EN ISO udgave Campingtelte. Camping tents
Dansk standard DS/EN ISO 5912 2. udgave 2011-11-22 Campingtelte Camping tents DS/EN ISO 5912 København DS projekt: M245636 ICS: 97.200.30 Første del af denne publikations betegnelse er: DS/EN ISO, hvilket
Læs mereTekniske specifikationer for centrifugalpumper Klasse III
Dansk standard Tillæg DS/EN ISO 9908/A1 1. udgave 2011-06-08 Tekniske specifikationer for centrifugalpumper Klasse III Technical specifications for centrifugal pumps Class III Amendment 1 DS/EN ISO 9908/A1
Læs mereKosmetik Metoder til prøvning af solbeskyttelse In vivo-bestemmelse af UVA-beskyttelse
Dansk standard DS/EN ISO 24442 1. udgave 2012-02-01 Kosmetik Metoder til prøvning af solbeskyttelse In vivo-bestemmelse af UVA-beskyttelse Cosmetics Sun protection test methods In vivo determination of
Læs merePapir og karton Bestemmelse af tykkelse, densitet og massevolumen
Dansk standard DS/EN ISO 534 1. udgave 2012-01-04 Papir og karton Bestemmelse af tykkelse, densitet og massevolumen Paper and board Determination of thickness, density and specific volume DS/EN ISO 534
Læs merePulvermaling Del 7: Bestemmelse af massetab efter ophedning i ovn
Dansk standard DS/EN ISO 8130-7 1. udgave 2011-01-21 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 8130-7:2011 Pulvermaling Del 7: Bestemmelse af massetab efter ophedning
Læs mereKrydderier og smagsstoffer Botanisk nomenklatur
Dansk standard DS/EN ISO 676 1. udgave 2009-07-23 Krydderier og smagsstoffer Botanisk nomenklatur Spices and condiments Botanical nomenclature DS/EN ISO 676 København DS projekt: M230052 ICS: 01.040.67;
Læs mereMajs Bestemmelse af vandindhold (i forarbejdet korn og i hele korn)
Dansk standard DS/EN ISO 6540 1. udgave 2010-06-23 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 6540:2010 Majs Bestemmelse af vandindhold (i forarbejdet korn og i hele
Læs mereGeometriske produktspecifikationer (GPS) Længdemåleudstyr højdemålere Design og metrologiske karakteristika
Dansk standard DS/EN ISO 13225 1. udgave 2012-05-23 Geometriske produktspecifikationer (GPS) Længdemåleudstyr højdemålere Design og metrologiske karakteristika Geometrical product specifications (GPS)
Læs mereTeknisk tegning Flowdiagrammer til procesanlæg Generelle regler
Dansk Standard DS/EN ISO 10628 1. udgave Godkendelsesblad Godkendt:2001-04-06 Teknisk tegning Flowdiagrammer til procesanlæg Generelle regler Flow diagrams for process plants General rules DANSK STANDARD
Læs merePlast Bestemmelse af termoplasts massesmelteindeks (MFR) og volumensmelteindeks (MVR) Del 1: Standardmetode
Dansk standard DS/EN ISO 1133-1 1. udgave 2012-01-25 Plast Bestemmelse af termoplasts massesmelteindeks (MFR) og volumensmelteindeks (MVR) Del 1: Standardmetode Plastics Determination of the melt mass-flow
Læs mereMaintenance Documentation for maintenance
Dansk standard DS/EN 13460 3. udgave 2009-12-15 Vedligehold Dokumentation for vedligehold Maintenance Documentation for maintenance DS/EN 13460 København DS projekt: M245239 ICS: 01.110; 21.020 Første
Læs mereMiljømærkning Egendeklaration af miljøpåstande (Type II miljømærkning)
Dansk standard Tillæg DS/EN ISO 14021/A1 1. udgave 2012-02-08 Miljømærkning Egendeklaration af miljøpåstande (Type II miljømærkning) Environmental labels and declarations Self-declared environmental claims
Læs merePalmeolie Bestemmelse af indeks for forringelse af blegningsevne (DOBI) samt bestemmelse af karotinindhold
Dansk standard DS/EN ISO 17932 2. udgave 2011-11-07 Palmeolie Bestemmelse af indeks for forringelse af blegningsevne (DOBI) samt bestemmelse af karotinindhold Palm oil Determination of the deterioration
Læs mereCentrale strømforsyningssystemer
Dansk Standard DS/EN 50171 1. udgave 2001-08-29 Centrale strømforsyningssystemer Central power supply systems DS/EN 50171 København DS projekt: 30769 ICS: 29.200 Deskriptorer: belysning til nødudgang,elektriske
Læs mereMaskinsikkerhed Elektrisk udstyr på maskiner Del 1: Generelle krav
Dansk standard Tillæg DS/EN 60204-1/A1 1. udgave 2009-03-13 Maskinsikkerhed Elektrisk udstyr på maskiner Del 1: Generelle krav Safety of machinery Electrical equipment of machines Part 1: General requirements
Læs mereMiljøledelsessystemer Kravbeskrivelse med råd om anvendelse
Dansk standard DS/EN ISO 14001 2. udgave 2004-11-30 Miljøledelsessystemer Kravbeskrivelse med råd om anvendelse Environmental management systems Requirements with guidance for use DS/EN ISO 14001 København
Læs mereDansk standard DS/EN Risk management Risk assessment techniques. 1. udgave
Dansk standard DS/EN 31010 1. udgave 2010-05-20 Risikoledelse Teknikker til risikovurdering Risk management Risk assessment techniques DS/EN 31010 København DS projekt: M231261 ICS: 03.100.01 Første del
Læs mereFritidsbåde Komfurer til flydende brændsel
Dansk standard DS/EN ISO 14895 1. udgave 2003-04-11 Fritidsbåde Komfurer til flydende brændsel Small craft Liquid-fuelled galley stoves DS/EN ISO 14895 København DS projekt: 47074 ICS: 47.080 Deskriptorer:
Læs mereDansk standard DS/EN Loft ladders Requirements, marking and testing. 1. udgave
Dansk standard DS/EN 14975 1. udgave 2007-02-26 Loftstiger Krav, mærkning og prøvning Loft ladders Requirements, marking and testing DS/EN 14975 København DS projekt: 55746 ICS: 97.145 Første del af denne
Læs mereMalinger og lakker Belysning og procedure for visuel vurdering af belægninger
Dansk standard DS/EN ISO 13076 1. udgave 2012-08-10 Malinger og lakker Belysning og procedure for visuel vurdering af belægninger Paints and varnishes Lighting and procedure for visual assessments of coatings
Læs mereSlanger og rør af gummi og plast Måling af fleksibilitet og stivhed Del 2: Bøjeprøvning ved lavere temperaturer end rumtemperatur
Dansk standard DS/EN ISO 10619-2 1. udgave 2012-01-24 Slanger og rør af gummi og plast Måling af fleksibilitet og stivhed Del 2: Bøjeprøvning ved lavere temperaturer end rumtemperatur Rubber and plastics
Læs mereDansk standard DS/EN Weibull analysis. 1. udgave
Dansk standard DS/EN 61649 1. udgave 2008-12-10 Weilbull-analyse Weibull analysis DS/EN 61649 København DS projekt: M219606 ICS: 03.120.30 Første del af denne publikations betegnelse er: DS/EN, hvilket
Læs mereGeoteknisk undersøgelse og prøvning Driftsprøvning Del 3: Standard penetrationstest
Dansk standard Tillæg DS/EN ISO 22476-3/A1 1. udgave 2011-12-22 Geoteknisk undersøgelse og prøvning Driftsprøvning Del 3: Standard penetrationstest Geotechnical investigation and testing Field testing
Læs mereLampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler
Dansk standard Tillæg DS/EN 60061-1/A41 (elektronisk) 1. udgave 2010-06-24 Lampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler Lamp caps and holders together
Læs mereCold rolled narrow steel strip Tolerances on dimensions and shape
Dansk standard DS/EN 10140 3. udgave 2009-06-02 Koldvalset båndstål Tolerancer for dimensioner og form Cold rolled narrow steel strip Tolerances on dimensions and shape DS/EN 10140 København DS projekt:
Læs merePackaging Flexible plastic/metal laminate tubes Dimensions and tolerances of nozzle S 13
Dansk standard DS/EN 14979 1. udgave 2006-03-31 Emballage Fleksible laminattuber af plast/metal Dimensioner og tolerancer for dyse S 13 Packaging Flexible plastic/metal laminate tubes Dimensions and tolerances
Læs mereBatchstyring Del 1: Modeller og terminologi
Dansk Standard DS/EN 61512-1 1. udgave 2001-08-29 Batchstyring Del 1: Modeller og terminologi Batch control Part 1: Models and terminology DS/EN 61512-1 København DS projekt: 26009 ICS: 25.040.40 Deskriptorer:
Læs mereRotordynamiske pumper Godkendelsesprøvning af hydraulisk ydeevne Klasse 1, 2 og 3
Dansk standard DS/EN ISO 9906 2. udgave 2012-06-08 Rotordynamiske pumper Godkendelsesprøvning af hydraulisk ydeevne Klasse 1, 2 og 3 Rotodynamic pumps Hydraulic performance acceptance tests Grades 1, 2
Læs mereControl technology Rules for the designation of measuring instruments
Dansk standard DS/EN 62419 1. udgave 2009-03-10 Styringsteknologi Regler for benævnelse af måleinstrumenter Control technology Rules for the designation of measuring instruments DS/EN 62419 København DS
Læs mereElektrostatik Del 4-1: Standardprøvningsmetoder. anvendelser Gulvbelægningers og monterede gulves elektrostatiske egenskaber
Dansk standard Tillæg DS/EN 61340-4-1:2004/A1:2015 1. udgave 2015-06-23 Elektrostatik Del 4-1: Standardprøvningsmetoder for specifikke anvendelser Gulvbelægningers og monterede gulves elektrostatiske egenskaber
Læs mereTemperature Electromotive force (EMF) tables for pure-element thermocouple combinations
Dansk standard DS/EN 62460 1. udgave 2008-10-14 Temperatur Elektromotorisk kraft (EMF) Tabeller for kombinationer af rene termoelementer Temperature Electromotive force (EMF) tables for pure-element thermocouple
Læs mereLampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler
Dansk standard Tillæg DS/EN 60061-1/A47 (elektronisk) 1. udgave 2012-04-23 Lampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler Lamp caps and holders together
Læs mereMobil og bærbar DVB-T/H-radiotilslutning Del 2: Grænsefladeoverensstemmelsesprøvning
Dansk standard DS/EN 62002-2 1. udgave 2006-12-12 Mobil og bærbar DVB-T/H-radiotilslutning Del 2: Grænsefladeoverensstemmelsesprøvning Mobile and portable DVB-T/H radio access Part 2: Interface conformance
Læs mereIkke-destruktiv prøvning Lækprøvning Kriterier for valg af metode og teknik
Dansk Standard DS/EN 1779 2. udgave 2001-10-26 Ikke-destruktiv prøvning Lækprøvning Kriterier for valg af metode og teknik Non-destructive testing Leak testing Criteria for method and technique selection
Læs mereVinduer og døre Vandtæthed Klassifikation
Dansk Standard DS/EN 12208 1. udgave Godkendt:2000-12-29 Vinduer og døre Vandtæthed Klassifikation Windows and doors Watertightness Classification DANSK STANDARD - Eftertryk uden tilladelse forbudt Kollegievej
Læs merePrøvningsmetoder til hjælpekomponenter til murværk Del 4: Bestemmelse af lastkapacitet og lastnedbøjning i bjælkesko
Dansk standard DS/EN 846-4 + A1 2. udgave 2002-12-04 Prøvningsmetoder til hjælpekomponenter til murværk Del 4: Bestemmelse af lastkapacitet og lastnedbøjning i bjælkesko Methods of test for ancillary components
Læs mereSolcelleanlæg Termer, definitioner og symboler
DS-information DS/CLC/TS 61836 1. udgave 2009-06-26 Solcelleanlæg Termer, definitioner og symboler Solar photovoltaic energy systems Terms, definitions and symbols DS/CLC/TS 61836 København DS projekt:
Læs mereStyring af rumfartsprojekter. Generelle krav. Del 1: Politik og principper
Dansk Standard DS/EN 13290-1 1. udgave Godkendt:2000-04-13 Styring af rumfartsprojekter. Generelle krav. Del 1: Politik og principper Space project management - General requirements - Part 1: Policy and
Læs mereGrænseflade for digital lyd Del 1: Generelt
Dansk standard DS/EN 60958-1 3. udgave 2008-10-31 Grænseflade for digital lyd Del 1: Generelt Digital audio interface Part 1: General DS/EN 60958-1 København DS projekt: M222433 ICS: 33.160.30 Første del
Læs mereKapslingsklasser (IP-kode)
Dansk Standard DS/EN 60529+A1 1. udgave 2002-04-05 Kapslingsklasser (IP-kode) Degrees of protection provided by enclosures (IP Code) DS/EN 60529+A1 København DS projekt: 47050 ICS: 29.020 Deskriptorer:
Læs mereUdstyr til tilslutning af belysningsarmaturer til husholdningsbrug o.l. Del 2: Normblade for DCL
Dansk standard DS/EN 61995-2 1. udgave 2009-06-10 Udstyr til tilslutning af belysningsarmaturer til husholdningsbrug o.l. Del 2: Normblade for DCL Devices for the connection of luminaires for household
Læs mereBordtennis Del 2: Netstolper Krav og prøvningsmetoder
Dansk standard DS/EN 14468-2:2015 2. udgave 2015-04-29 Bordtennis Del 2: Netstolper Krav og prøvningsmetoder Table tennis Part 2: Posts for net assemblies Requirements and test methods DS/EN 14468-2:2015
Læs mereLedelse af pålidelighedsaktiviteter Del 3-11: Anvendelsesvejledning Pålidelighedscentreret vedligehold (RCM)
Dansk standard DS/EN 60300-3-11 1. udgave 2009-12-10 Ledelse af pålidelighedsaktiviteter Del 3-11: Anvendelsesvejledning Pålidelighedscentreret vedligehold (RCM) Dependability management Part 3-11: Application
Læs mereKøkkengrej Grafiske symboler (piktogrammer)
Dansk standard DS/EN 14916 1. udgave 2005-11-14 Køkkengrej Grafiske symboler (piktogrammer) Domestic cookware Graphical symbols (pictograms) DS/EN 14916 København DS projekt: 55114 ICS: 01.080.20; 97.040.60
Læs mereWc-kummer og wc-møbler Tilslutningsdimensioner
Dansk standard DS/EN 33 3. udgave 2011-10-03 Wc-kummer og wc-møbler Tilslutningsdimensioner WC pans and WC suites Connecting dimensions DS/EN 33 København DS projekt: M235262 ICS: 91.140.70 Første del
Læs mereMultimedia quality Method of assessment of synchronization of audio and video
Dansk standard DS/EN 62503 1. udgave 2008-10-31 Multimediekvalitet Metode til fastsættelse af synkronisering mellem lyd og billede Multimedia quality Method of assessment of synchronization of audio and
Læs mereAkustik Deklarering og verificering af støj fra maskiner og udstyr
Dansk standard DS/EN ISO 4871 2. udgave 2009-09-09 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 4871:2009 Akustik Deklarering og verificering af støj fra maskiner og udstyr
Læs mereSteel castings Austenitic manganese steel castings
Dansk standard DS/EN 10349 1. udgave 2009-11-05 Stålstøbegods Austenitisk manganstålstøbegods Steel castings Austenitic manganese steel castings DS/EN 10349 København DS projekt: M220956 ICS: 77.140.80
Læs mereTeknisk tegning Diagrammer til den kemiske og petrokemiske industri Del 2: Grafiske symboler
Dansk standard DS/EN ISO 10628-2 1. udgave 2012-12-19 Teknisk tegning Diagrammer til den kemiske og petrokemiske industri Del 2: Grafiske symboler Diagrams for the chemical and petrochemical industry Part
Læs mereMalinger og lakker Bestemmelse af bestandighed mod cykliske korrosionsbetingelser Del 1: Vådt (salttåge)/tørt/fugtigt
Dansk standard DS/EN ISO 11997-1 1. udgave 2006-03-06 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 11997-1:2006 Malinger og lakker Bestemmelse af bestandighed mod cykliske
Læs mereIntegration af virksomhedens styringssystem Del 1: Modeller og terminologi
Dansk standard DS/EN 62264-1 1. udgave 2008-02-01 Integration af virksomhedens styringssystem Del 1: Modeller og terminologi Enterprise-control system integration DS/EN 62264-1 København DS projekt: M222179
Læs mereLegepladsredskaber og -underlag Del 11: Tredimensionelle klatrenet Supplerende specifikke sikkerhedskrav og prøvningsmetoder
Dansk standard DS/EN 1176-11 2. udgave 2009-04-22 Legepladsredskaber og -underlag Del 11: Tredimensionelle klatrenet Supplerende specifikke sikkerhedskrav og prøvningsmetoder Playground equipment and surfacing
Læs mereAkustik Støjreduktion Kabiner Laboratorie- og in situ-målinger
Dansk standard DS/EN ISO 11957 2. udgave 2009-09-22 Akustik Støjreduktion Kabiner Laboratorie- og in situ-målinger Acoustics Determination of sound insulation performance of cabins Laboratory and in situ
Læs mereDansk Standard DS/EN udgave. Flymateriel
Dansk Standard DS/EN 3961 1. udgave Godkendt:2001-07-11 Flymateriel Aerospace series Gold base alloy AU-B40001 Filler metal for brazing-rolled foil DANSK STANDARD - Eftertryk uden tilladelse forbudt Kollegievej
Læs mereGrænseflade for digital lyd Del 1: Generelt
Dansk standard Tillæg DS/EN 60958-1/A1 1. udgave 2014-09-02 Grænseflade for digital lyd Del 1: Generelt Digital audio interface Part 1: General DS/EN 60958-1/A1 København DS projekt: M277911 ICS: 33.160.30
Læs mereSkovbrugs- og havebrugsmaskiner Vibrationsprøvning af bærbare håndholdte maskiner med forbrændingsmotor Vibrationer ved håndtagene
Dansk standard DS/EN ISO 22867 3. udgave 2012-01-25 Skovbrugs- og havebrugsmaskiner Vibrationsprøvning af bærbare håndholdte maskiner med forbrændingsmotor Vibrationer ved håndtagene Forestry and gardening
Læs mereFacility Management Del 2: Vejledning i udarbejdelse af Facility Management-aftaler
Dansk standard DS/EN 15221-2 2. udgave 2008-06-30 Facility Management Del 2: Vejledning i udarbejdelse af Facility Management-aftaler Facility Management Part 2: Guidance on how to prepare Facility Management
Læs mereKontormøbler Kontorstole Del 1: Mål Bestemmelse af dimensioner
Dansk Standard DS/EN 1335-1 2. udgave Godkendt: 2001-02-21 Kontormøbler Kontorstole Del 1: Mål Bestemmelse af dimensioner Office furniture Office work chair Part 1: Dimensions Determination of dimensions
Læs mereDansk standard DS/EN 13429. Packaging Reuse. 3. udgave 2006-10-12
Dansk standard DS/EN 13429 3. udgave 2006-10-12 Emballage Genbrug Packaging Reuse DS/EN 13429 København DS projekt: M215981 ICS: 13.030.50; 55.020 Første del af denne publikations betegnelse er: DS/EN,
Læs mereHjælpemidler til personer med funktionsevnenedsættelse Klassifikation og terminologi
Dansk standard DS/EN ISO 9999 6. udgave 2007-12-19 Hjælpemidler til personer med funktionsevnenedsættelse Klassifikation og terminologi Assistive products for persons with disability Classification and
Læs mereTilsatsmaterialer til svejsning Pulverfyldte elektroder til metallysbuesvejsning
Dansk standard DS/EN ISO 12153 1. udgave 2012-06-08 Tilsatsmaterialer til svejsning Pulverfyldte elektroder til metallysbuesvejsning med eller uden beskyttelsesgas af nikkel og nikkellegeringer Klassifikation
Læs mereSpecifikation og kvalificering af svejseprocedurer for metalliske materialer Kvalificering ved godkendelse af en standardsvejseprocedure
Dansk standard DS/EN ISO 15612 2. udgave 2005-12-22 Specifikation og kvalificering af svejseprocedurer for metalliske materialer Kvalificering ved godkendelse af en standardsvejseprocedure Specification
Læs mereKlassifikation og betegnelse af dokumenter for fabriksanlæg, anlæg og udstyr Del 1: Regler og klassifikationstabeller
Dansk standard DS/EN 61355-1 2. udgave 2008-07-04 Klassifikation og betegnelse af dokumenter for fabriksanlæg, anlæg og udstyr Del 1: Regler og klassifikationstabeller Classification and designation of
Læs mereMatematiske udtryk for pålidelighed, tilgængelighed og vedligehold samt for understøttelse af vedligehold
Dansk Standard DS/EN 61703 1. udgave 2002-05-01 Matematiske udtryk for pålidelighed, tilgængelighed og vedligehold samt for understøttelse af vedligehold Mathematical expressions for reliability,availability,
Læs mereHalvlederelementer Mekaniske og klimatiske prøvningsmetoder Del 33: Accelereret fugtbestandighed Objektiv autoklav
Dansk standard DS/EN 60749-33 1. udgave 2004-04-29 Halvlederelementer Mekaniske og klimatiske prøvningsmetoder Del 33: Accelereret fugtbestandighed Objektiv autoklav Semiconductor devices Mechanical and
Læs mereSvejsekoordination Opgaver og ansvarsforhold
Dansk standard DS/EN ISO 14731 1. udgave 2006-11-06 Svejsekoordination Opgaver og ansvarsforhold Welding coordination Tasks and responsibilities DS/EN ISO 14731:2006 København DS projekt: 55660 ICS: 25.160.01
Læs mereElproducerende vindmøller Del 25-3: Kommunikationssystemer til overvågning og styring af vindmølleparker Modeller for informationsudveksling
Dansk standard DS/EN 61400-25-3 1. udgave 2007-04-27 Elproducerende vindmøller Del 25-3: Kommunikationssystemer til overvågning og styring af vindmølleparker Modeller for informationsudveksling Wind turbines
Læs mereEurocode 7: Geoteknik Del 1: Generelle regler
Dansk standard Tillæg DS/EN 1997-1/A1 1. udgave 2014-02-03 Eurocode 7: Geoteknik Del 1: Generelle regler Eurocode 7: Geotechnical design Part 1: General rules DS/EN 1997-1/A1 København DS projekt: M267839
Læs mereKosmetik Mikrobiologi Vurdering af et kosmetikprodukts antimikrobielle beskyttelse
Dansk standard DS/EN ISO 11930 1. udgave 2012-04-25 Kosmetik Mikrobiologi Vurdering af et kosmetikprodukts antimikrobielle beskyttelse Cosmetics Microbiology Evaluation of the antimicrobial protection
Læs mereEurocode 1: Last på bærende konstruktioner Del 1-3: Generelle laster Snelast
Dansk standard DS/EN 1991-1-3 2. udgave 2007-06-22 Eurocode 1: Last på bærende konstruktioner Del 1-3: Generelle laster Snelast Eurocode 1 Actions on structures Part 1-3: General actions - Snow loads DS/EN
Læs mereLiming materials Determination of the breakdown of granulated calcium and calcium/magnesium carbonates under the influence of water
Dansk standard DS/EN 15704 1. udgave 2009-01-23 Jordbrugskalk Bestemmelse af nedbrydning af granuleret calcium- og calcium/magnesiumcarbonater påvirket af vand Liming materials Determination of the breakdown
Læs mereGrænseflade for digital lysstyring (DALI) Del 208: Særlige krav til kontroludstyr Omskifterfunktion (udstyrstype 7)
Dansk standard DS/EN 62386-208 1. udgave 2009-09-22 Grænseflade for digital lysstyring (DALI) Del 208: Særlige krav til kontroludstyr Omskifterfunktion (udstyrstype 7) Digital addressable lighting Interface
Læs mereTandpleje Manuelle tandbørster Generelle krav og prøvningsmetoder
Dansk standard DS/EN ISO 20126 2. udgave 2012-04-18 Tandpleje Manuelle tandbørster Generelle krav og prøvningsmetoder Dentistry Manual toothbrushes General requirements and test methods DS/EN ISO 20126
Læs mereAudioudstyr og audiovisuelt udstyr Digitale audiodele Grundlæggende metoder til måling af audiokarakteristika Del 3: Professionel brug
Dansk standard DS/EN 61606-3 1. udgave 2008-12-12 Audioudstyr og audiovisuelt udstyr Digitale audiodele Grundlæggende metoder til måling af audiokarakteristika Del 3: Professionel brug Audio and audiovisual
Læs mereTrækonstruktioner Bestemmelse af dyblers brudmoment
Dansk standard DS/EN 409 2. udgave 2009-06-24 Trækonstruktioner Bestemmelse af dyblers brudmoment Timber structures Test methods Determination of the yield moment of dowel type fasteners DS/EN 409 København
Læs mereJernbaneanvendelser Datakommunikation, signallering og databehandling Del 1: Sikkerhedsrelateret kommunikation i lukkede transmissionssystemer
Dansk Standard DS/EN 50159-1 1. udgave 2001-10-31 Jernbaneanvendelser Datakommunikation, signallering og databehandling Del 1: Sikkerhedsrelateret kommunikation i lukkede transmissionssystemer Railway
Læs mereFaste modstande til brug i elektronisk udstyr Del 1: Generisk specifikation
Dansk standard Tillæg DS/EN 60115-1:2011/ A11:2015 1. udgave 2015-05-18 Faste modstande til brug i elektronisk udstyr Del 1: Generisk specifikation Fixed resistors for use in electronic equipment Part
Læs mereØjenoptik Intraokulære linser Del 9: Multifokale intraokulære linser
Dansk standard Tillæg DS/EN ISO 11979-9/A1 1. udgave 2014-08-28 Øjenoptik Intraokulære linser Del 9: Multifokale intraokulære linser Ophthalmic implants Intraocular lenses Part 9: Multifocal intraocular
Læs mereFysiske størrelser og enheder Del 14: Telebiometri relateret til human fysiologi
Dansk standard DS/EN 80000-14 1. udgave 2009-05-27 Fysiske størrelser og enheder Del 14: Telebiometri relateret til human fysiologi Quantities and units Part 14: Telebiometrics related to human physiology
Læs mereBærbare motordrevne hækklippere Sikkerhed
Dansk standard Tillæg DS/EN ISO 10517/A1 1. udgave 2013-09-19 Bærbare motordrevne hækklippere Sikkerhed Powered hand-held hedge trimmers Safety DS/EN ISO 10517/A1 København DS projekt: M263321 ICS: 65.060.70
Læs mereStearinlys Produktsikkerhedsmærkning
Dansk standard DS/EN 15494 1. udgave 2007-11-12 Stearinlys Produktsikkerhedsmærkning Candles Product safety labels DS/EN 15494 København DS projekt: M212730 ICS: 13.120; 97.180 Første del af denne publikations
Læs mereGødning Ekstraktion af vandopløseligt calcium, magnesium, natrium og svovl i form af sulfat
Dansk standard DS/EN 15961 1. udgave 2012-01-06 Gødning Ekstraktion af vandopløseligt calcium, magnesium, natrium og svovl i form af sulfat Fertilizers Extraction of water-soluble calcium, magnesium, sodium
Læs mereForkoblingsenheder for lysstofrør Krav til ydeevne
Dansk standard DS/EN 60921 2. udgave 2005-02-10 Forkoblingsenheder for lysstofrør Krav til ydeevne Ballasts for tubular fluorescent lamps Performance requirements DS/EN 60921 København DS projekt: 49567
Læs mereInstrumenttransformere Del 8: Elektroniske strømtransformere
Dansk standard DS/EN 60044-8 1. udgave 2002-10-24 Instrumenttransformere Del 8: Elektroniske strømtransformere Instrument transformers - Part 8: Electronic current transformers DS/EN 60044-8 København
Læs mereBæredygtighed inden for byggeri og anlæg Miljøvaredeklarationer (EPD) Kommunikationsformat: business-tobusiness
Dansk standard DS/EN 15942 1. udgave 2011-10-28 Bæredygtighed inden for byggeri og anlæg Miljøvaredeklarationer (EPD) Kommunikationsformat: business-tobusiness (B2B) Sustainability of construction works
Læs mereLoddefri forbindelser Del 2: Krimpede forbindelser Generelle krav, prøvningsmetoder og praktisk vejledning
Dansk standard Tillæg DS/EN 60352-2/A1 1. udgave 2013-09-26 Loddefri forbindelser Del 2: Krimpede forbindelser Generelle krav, prøvningsmetoder og praktisk vejledning Solderless connections Part 2: Crimped
Læs mereStørrelser og enheder Del 13: Informationsvidenskab og -teknologi
Dansk standard DS/EN 80000-13 1. udgave 2008-08-22 Størrelser og enheder Del 13: Informationsvidenskab og -teknologi Quantities and units Part 13: Information science and technology DS/EN 80000-13 København
Læs mereØjenoptik Brillestel Målesystem og terminologi
Dansk standard Tillæg DS/EN ISO 8624:2011/A1:2015 1. udgave 2015-09-11 Øjenoptik Brillestel Målesystem og terminologi Ophthalmic optics Spectacle frames Measuring system and terminology DS/EN ISO 8624:2011/A1:2015
Læs mereVarmebehandlede pladeskruer af stål Mekaniske egenskaber
Dansk standard DS/EN ISO 2702 2. udgave 2011-07-05 Varmebehandlede pladeskruer af stål Mekaniske egenskaber Heat-treated steel tapping screws Mechanical properties DS/EN ISO 2702 København DS projekt:
Læs mereEnergiledelsessystemets grænseflade til applikationsprogrammer (EMS-API) Del 453: CIM-baseret grafisk udveksling
Dansk standard DS/EN 61970-453 1. udgave 2008-09-26 Energiledelsessystemets grænseflade til applikationsprogrammer (EMS-API) Del 453: CIM-baseret grafisk udveksling Energy management system application
Læs mereidentifikation Betjeningsprincipper
Dansk standard DS/EN 60447 1. udgave 2005-03-01 Grundlæggende principper og sikkerhedsprincipper for mandmaskine-grænseflade, mærkning og identifikation Betjeningsprincipper Basic and safety principles
Læs merePanhovedskruer med krydskærv af type H eller Z Produktklasse A
Dansk standard DS/EN ISO 7045 2. udgave 2011-10-14 Panhovedskruer med krydskærv af type H eller Z Produktklasse A Pan head screws with type H or type Z cross recess Product grade A DS/EN ISO 7045 København
Læs mereTransportenheder ISO-containere Kode, identifikation og mærkning Tillæg 3
Dansk standard Tillæg DS/EN ISO 6346/A3 1. udgave 2013-01-22 Transportenheder ISO-containere Kode, identifikation og mærkning Tillæg 3 Freight containers Coding, identification and marking Amendment 3
Læs mereDansk standard DS/EN
Dansk standard DS/EN 60512-16-5 1. udgave 2008-11-07 Konnektorer til elektronisk udstyr Prøvninger og målinger Del 16-5: Mekaniske prøvninger af kontakter og afslutninger Prøvning 16e: Tilbagetrækningskraft
Læs mereElmålingsudstyr (vekselstrøm) Særlige krav Del 23: Statiske målere til reaktiv energi (klasse 2 og 3)
Dansk standard DS/EN 62053-23 1. udgave 2003-04-11 Elmålingsudstyr (vekselstrøm) Særlige krav Del 23: Statiske målere til reaktiv energi (klasse 2 og 3) Electricity metering equipment (a.c.) Particular
Læs mereGeometriske produktspecifikationer (GPS) Konusser og konusvinkler
Dansk standard DS/EN ISO 1119 1. udgave 2003-01-23 Geometriske produktspecifikationer (GPS) Konusser og konusvinkler Geometrical product specifications (GPS) Series of conical tapers and taper angles DS/EN
Læs mereFugtindhold af et stykke savet træ Del 2: Vurdering ved elektrisk modstandsmetode
Dansk Standard DS/EN 13183-2 1. udgave 2002-04-30 Fugtindhold af et stykke savet træ Del 2: Vurdering ved elektrisk modstandsmetode Moisture content of a piece of sawn timber Part 2: Estimation by electrical
Læs mereBefæstelseselementer Del 2: Rundhovedskruer med indvendig sekskant og krave
Dansk standard DS/EN ISO 7380-2 1. udgave 2011-09-07 Befæstelseselementer Del 2: Rundhovedskruer med indvendig sekskant og krave Button head screws Part 2: Hexagon socket button head screws with collar
Læs mere