Dansk standard DS/EN ISO
|
|
- Carl Vestergaard
- 5 år siden
- Visninger:
Transkript
1 Dansk standard DS/EN ISO udgave Intelligente transportsystemer Trafikog rejseinformation via trafikmeldingskodning Del 1: Kodningsprotokol til radiodatasystem Trafikmeldingskanal (RDS-TMC) ved brug af ALERT-C Intelligent transport systems Traffic and travel information messages via traffic message coding Part 1: Coding protocol for Radio Data System Traffic Message Channel (RDS-TMC) using ALERT-C
2 DS/EN ISO København DS projekt: M ICS: ; Første del af denne publikations betegnelse er: DS/EN ISO, hvilket betyder, at det er en international standard, der har status både som europæisk og dansk standard. Denne publikations overensstemmelse er: IDT med: ISO :2013. IDT med: EN ISO :2013. DS-publikationen er på engelsk. Denne publikation erstatter: DS/EN ISO :2003; DS/EN ISO /AC:2004. DS-publikationstyper Dansk Standard udgiver forskellige publikationstyper. Typen på denne publikation fremgår af forsiden. Der kan være tale om: Dansk standard standard, der er udarbejdet på nationalt niveau, eller som er baseret på et andet lands nationale standard, eller standard, der er udarbejdet på internationalt og/eller europæisk niveau, og som har fået status som dansk standard DS-information publikation, der er udarbejdet på nationalt niveau, og som ikke har opnået status som standard, eller publikation, der er udarbejdet på internationalt og/eller europæisk niveau, og som ikke har fået status som standard, fx en teknisk rapport, eller europæisk præstandard DS-håndbog samling af standarder, eventuelt suppleret med informativt materiale DS-hæfte publikation med informativt materiale Til disse publikationstyper kan endvidere udgives tillæg og rettelsesblade DS-publikationsform Publikationstyperne udgives i forskellig form som henholdsvis fuldtekstpublikation (publikationen er trykt i sin helhed) godkendelsesblad (publikationen leveres i kopi med et trykt DS-omslag) elektronisk (publikationen leveres på et elektronisk medie) DS-betegnelse Alle DS-publikationers betegnelse begynder med DS efterfulgt af et eller flere præfikser og et nr., fx DS 383, DS/EN 5414 osv. Hvis der efter nr. er angivet et A eller Cor, betyder det, enten at det er et tillæg eller et rettelsesblad til hovedstandarden, eller at det er indført i hovedstandarden. DS-betegnelse angives på forsiden. Overensstemmelse med anden publikation: Overensstemmelse kan enten være IDT, EQV, NEQ eller MOD IDT: Når publikationen er identisk med en given publikation. EQV: Når publikationen teknisk er i overensstemmelse med en given publikation, men præsentationen er ændret. NEQ: Når publikationen teknisk eller præsentationsmæssigt ikke er i overensstemmelse med en given standard, men udarbejdet på baggrund af denne. MOD: Når publikationen er modificeret i forhold til en given publikation.
3 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN ISO December 2013 ICS ; Supersedes EN ISO :2003 English Version Intelligent transport systems - Traffic and travel information messages via traffic message coding - Part 1: Coding protocol for Radio Data System - Traffic Message Channel (RDS-TMC) using ALERT-C (ISO :2013) Systèmes intelligents de transport - Informations sur le trafic et le tourisme via le codage de messages sur le trafic - Partie 1: Protocole de codage pour le système de radiodiffusion de données (RDS) - Canal de messages d'informations sur le trafic (RDS-TMC) avec ALERT-C(ISO :2013) Intelligente Transportsysteme - Verkehrs- und Reiseinformationen über Verkehrsmeldungskodierung - Teil 1: Kodierungsprotokoll für den digitalen Radiokanal für Verkehrsmeldungen (RDS-TMC) unter Nutzung von ALERT-C (ISO :2013) This European Standard was approved by CEN on 26 October CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO :2013 E
4 EN ISO :2013 (E) Contents Page Foreword...3 2
5 EN ISO :2013 (E) Foreword This document (EN ISO :2013) has been prepared by Technical Committee ISO/TC 204 Intelligent transport systems in collaboration with Technical Committee CEN/TC 278 Road transport and traffic telematics the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2014, and conflicting national standards shall be withdrawn at the latest by June Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO :2003. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO :2013 has been approved by CEN as EN ISO :2013 without any modification. 3
6
7 INTERNATIONAL STANDARD ISO Second edition Intelligent transport systems Traffic and travel information messages via traffic message coding Part 1: Coding protocol for Radio Data System Traffic Message Channel (RDS-TMC) using ALERT-C Systèmes intelligents de transport Informations sur le trafic et le tourisme via le codage de messages sur le trafic Partie 1: Protocole de codage pour le système de radiodiffusion de données (RDS) Canal de messages d'informations sur le trafic (RDS-TMC) avec ALERT-C Reference number ISO 2013
8 COPYRIGHT PROTECTED DOCUMENT ISO 2013 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISO s member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel Fax copyright@iso.org Web Published in Switzerland ii ISO 2013 All rights reserved
9 Contents Page Foreword... v Introduction... vii 1 Scope General scope Content Message management Transmission Event list Normative references Terms, definitions and abbreviated terms Terms and definitions Abbreviated terms Application General Definition of the TMC "travel service" TMC virtual terminal Event-oriented end-user information messages Strategic and tactical information Geographic relevance Transmitted message priority Event List Future extensions Presentation General TMC virtual language Message content General Event Description (11 bits) Primary Location (16 bits) Direction and Extent (4 bits) Duration (3 bits) Diversion Advice (1 bit) Implicit information Road class and road number Road segment Area, region and country Pre-assigned diversion advice Urgency within the terminal Directionality Duration type Nature Update class Quantifier type Optional message content General Combination of additional information Control codes (label 1) Length of route affected (label 2) Speed limit (label 3) ISO 2013 All rights reserved iii
10 5.5.6 Additional quantifiers (labels 4 and 5) Supplementary information (label 6) Start and stop times (labels 7 and 8) Multi-event messages (label 9) Detailed diversion instructions (label 10) Destinations (label 11) Precise location reference (label 12) Cross linkage to source of problem (label 13) Separator (label 14) Other information as defined by sub-labels (label 15) Reference to telephone services (label 15, sub-label 1-2) Message management General System messages General Location table Terminal requirements Change of database numbers Message repetition Message updating Message deletion General Message persistence Detailed stop-time Silent cancellation message Null message Message presentation Out of area referencing Structure of the INTER-ROAD concept INTER-ROAD messages Updating and cancellation of INTER-ROAD messages Transmission General Format of type 8A groups Immediate repetition Single-group user messages System messages General System information Tuning information Multi-group messages First group Subsequent groups Summary of X-bit usage in RDS-TMC type 8A groups...43 iv ISO 2013 All rights reserved
11 Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received. Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information The committee responsible for this document is ISO/TC 204, Intelligent transport systems. This second edition cancels and replaces the first edition (ISO :2003), which has been technically revised. ISO consists of the following parts, under the general title Intelligent transport systems Traffic and travel information messages via traffic message coding: Part 1: Coding protocol for Radio Data System Traffic Message Channel (RDS-TMC) using ALERT-C Part 2: Event and information codes for Radio Data System Traffic Message Channel (RDS-TMC) using ALERT-C Part 3: Location referencing for Radio Data System Traffic Message Channel (RDS-TMC) using ALERT-C Part 6: Encryption and conditional access for the Radio Data System Traffic Message Channel ALERT C coding Compared to previous releases, this version includes the following additions: Precise location referencing Tendencies of Traffic Queue Lengths (TTQL) Coding of parking POIs Coding of interrupted roads ISO 2013 All rights reserved v
12 Coding of other isolated POIs (except parking POIs) Coding of parallel roads Version identification of TMC location tables Location Table Exchange Format North American Safety Events in TMC Explicit Location Table Country Code transmission in TMC Guidelines for Service Providers and Terminal Manufacturers for Implementation of explicit Location Table Country Code transmission Coding of link roads GB-English - List of Quantifiers Additional Event Codes identified by Germany Additional TMC Events from Danish proposal Additional TMC Supplementary Information: Unconfirmed Report RDS-TMC delivery of IVR Telephone Number Coding of link roads vi ISO 2013 All rights reserved
13 Introduction Traffic and traveller information (TTI) may be disseminated through a number of services and means of communication to the end user, including static displays (e.g. Variable Message Signs), broadcast audio to car radios, broadcast data services to in-vehicle equipment (e.g. installed navigation system) and to nomadic device terminals (e.g. portable navigation device). For all such services, the data to be disseminated and the message structure involved in the various interfaces require clear definition and standard formats, in order to allow competitive products to operate with any received data. This part of ISO describes the data specification for TTI messages, together with their network layer and their service layer, which shall be conveyed by the RDS-TMC feature, specified in IEC (Second edition ). The TTI information chain, from event to end-user is quite complex and the TISA (the Traveller Information Services Association) value chain shown in Figure 1 helps to understand the key components: Figure 1 The Traveller Information Services Association TTI value chain A number of entities (e.g. companies, businesses) take part in one or more activities to complete the activities shown in the value chain. Two, in particular are described, for improved understanding: Service Provider: An organisation that constructs a data service, by gathering data, processing data and supplying the data service. A Service Provider then negotiates for the use of the necessary data bandwidth with a Broadcaster and/or Transmission Operator. A Service Provider is responsible for the "quality" of the content to his customers and must provide suitable customer support. Broadcaster: A traditionally incorporated organisation responsible for a continuous strand of audio programmes and their quality. A broadcaster may also be responsible for overall co-ordination of "broadcast transmissions" (often a Broadcaster is the licensee of a national regulator). A Broadcaster may also be a Service Provider. TTI services for travellers, using spoken radio reports and in-vision reports occupy broadcast air-time and whilst valuable to some, they are considered less useful by others. Furthermore, only some are useful for travellers on the move. Due to the widespread adoption of the Radio Data System, in VHF/FM broadcasting on Band II there is the possibility of transmitting coded TTI messages digitally and "silently" using the RDS- TMC feature, which avoids the interruption of planned programmes. This TTI delivery method has a number of advantages: TTI messages can be decoded into the language of the end user, regardless of location, more messages can be made available and planned broadcast programme interruption is avoided, so make delivery of TTI messages more timely and topical. The ALERT-C protocol defined in this part of ISO supports a data broadcasting service for travellers, providing information about many kinds of traffic and travel events. Messages include traffic incident information relating to national and regional routes and some urban roads and other information required by a traveller, such as roadworks and weather information. ISO 2013 All rights reserved vii
14 This part of ISO is based on the ALERT-C traffic message coding protocol, which was a product of DRIVE Project V1029, "RDS Advice and Problem Location for European Road Traffic". The RDS-ALERT project aimed to define standards for RDS-TMC, working in conjunction with the European Broadcasting Union (EBU) and the European Conference of Ministers of Transport (ECMT). The international standard has been implemented in many countries worldwide and, as a result of very extensive implementation experience, it has matured with many changes from the earliest version of the ALERT-C proposal of At that time CEN TC 278 Sub-working group (SWG) 4.1 developed the coding protocol, herein and the event list described in ISO ; meanwhile CEN TC 278 SWG 7.3 developed the location referencing method which is described in ISO Subsequently the TMC Forum was responsible for collecting specific additions and improvements intended for inclusion in this part of ISO Latterly, the Traveller Information Services Association (TISA) took over all responsibility (including TMC Forum legacy) for maintenance of this part of ISO 14819, which now includes an up to date set of industry supported enhancements to RDS-TMC. The RDS system is fully described in IEC (Second edition, 2009) and it contains the 'hooks' to RDS- TMC, detailed in this part of ISO It employs a group structured data protocol. It uses type 3A groups defined to carry Open Data Application (ODA) identification and service and network layer information. This enables signalling of the TMC feature in other data groups. It uses type 8A groups defined to carry RDS-TMC messages and location information, together with TMC service tuning information. Broadly, two types of RDS-TMC services are required: one that is, in effect, free of charge at the point of use by an end user and thus uses un-encrypted data, and one that is paid-for using encrypted data. The conditional access capability was developed by the TMC Forum and is described in ISO viii ISO 2013 All rights reserved
15 INTERNATIONAL STANDARD Intelligent transport systems Traffic and travel information messages via traffic message coding Part 1: Coding protocol for Radio Data System Traffic Message Channel (RDS-TMC) using ALERT-C 1 Scope 1.1 General scope The ALERT-C protocol is designed to provide mostly event-oriented road end-user information messages. Many "hooks" have been left for future development and a few status-orientated road end-user information messages were included. 1.2 Content The presentation section of the ALERT-C protocol specifies messages that may be presented to the user in accordance with the general requirements set out above. It defines the message structure and content, and its presentation to the end-user. RDS-TMC messages are language-independent, and can be presented in the language of the user's choice. The ALERT-C protocol utilises a standardised Event List (ISO ) of event messages with their code values, which also includes general traffic problems and weather situations. ALERT-C defines two categories of information within messages: basic and optional items. In principle, basic information is present in all messages. Optional information can be added to messages where necessary. Standard RDS-TMC user messages provide the following five basic items of explicit, broadcast information: 1. Event description, giving details of road event situations, general traffic problems and weather situations (e.g. congestion caused by accident) and where appropriate its severity (e.g. resulting queue length). 2. Location, indicating the area, road segment or point location where the source of the problem is situated. 3. Direction and Extent, identifying the adjacent segments or specific point locations also affected by the incident, and where appropriate the direction of traffic affected. 4. Duration, giving an indication of how long the problem is expected to last. 5. Diversion advice, showing whether or not end-users are recommended to find and follow an alternative route. Optional information can be added to any message using one or more additional RDS data groups. This optional addition can give greater detail or can deal with unusual situations. Any number of additional fields can in principle be added to each basic message, subject only to a maximum message length of five RDS data groups. ISO 2013 All rights reserved 1
16 1.3 Message management The message management component deals with the message management functions of RDS-TMC. The ALERT-C protocol distinguishes between user messages and system messages. User messages are those potentially made known to the end-user, as defined in the presentation section. System messages are of use only to the RDS-TMC terminal, for message management purposes. 1.4 Transmission The transmission component conveys the messages over-air. The ALERT-C protocol, which RDS-TMC uses, retains the fundamental approach of earlier work, which aims to code most messages entirely within a single RDS group. RDS-TMC information comprises both system information and user messages. System information relates to the particular TMC service, and details the parameters that the terminal needs to be able to find identify and decode the TMC information. System information is transmitted in type 3A groups and in type 8A groups. User messages contain the details of the traffic events; these may use one or more type 8A groups. Most messages may be transmitted using a single type 8A group, however messages with more detail (e.g. diversion advice) may use up to a total of five, type 8A groups. 1.5 Event list The ALERT-C Event List contains all event descriptions. It is described in ISO Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 4217:2008, Codes for the representation of currencies and funds ISO 8601:2004, Data elements and interchange formats Information interchange Representation of dates and times ISO , Intelligent transport systems Traffic and travel information messages via traffic message coding Part 2: Event and information codes for Radio Data System Traffic Message Channel (RDS- TMC) using ALERT-C ISO , Intelligent transport systems Traffic and travel information messages via traffic message coding Part 3: Location referencing for Radio Data System Traffic message Channel (RDS-TMC) using ALERT-C IEC 62106:2009, Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87.5 to MHz 3 Terms, definitions and abbreviated terms 3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply. 2 ISO 2013 All rights reserved
Dansk standard DS/EN ISO udgave Campingtelte. Camping tents
Dansk standard DS/EN ISO 5912 2. udgave 2011-11-22 Campingtelte Camping tents DS/EN ISO 5912 København DS projekt: M245636 ICS: 97.200.30 Første del af denne publikations betegnelse er: DS/EN ISO, hvilket
Læs mereTekniske specifikationer for centrifugalpumper Klasse III
Dansk standard Tillæg DS/EN ISO 9908/A1 1. udgave 2011-06-08 Tekniske specifikationer for centrifugalpumper Klasse III Technical specifications for centrifugal pumps Class III Amendment 1 DS/EN ISO 9908/A1
Læs merePapir og karton Bestemmelse af tykkelse, densitet og massevolumen
Dansk standard DS/EN ISO 534 1. udgave 2012-01-04 Papir og karton Bestemmelse af tykkelse, densitet og massevolumen Paper and board Determination of thickness, density and specific volume DS/EN ISO 534
Læs mereKosmetik Metoder til prøvning af solbeskyttelse In vivo-bestemmelse af UVA-beskyttelse
Dansk standard DS/EN ISO 24442 1. udgave 2012-02-01 Kosmetik Metoder til prøvning af solbeskyttelse In vivo-bestemmelse af UVA-beskyttelse Cosmetics Sun protection test methods In vivo determination of
Læs merePulvermaling Del 7: Bestemmelse af massetab efter ophedning i ovn
Dansk standard DS/EN ISO 8130-7 1. udgave 2011-01-21 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 8130-7:2011 Pulvermaling Del 7: Bestemmelse af massetab efter ophedning
Læs mereMajs Bestemmelse af vandindhold (i forarbejdet korn og i hele korn)
Dansk standard DS/EN ISO 6540 1. udgave 2010-06-23 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 6540:2010 Majs Bestemmelse af vandindhold (i forarbejdet korn og i hele
Læs merePlast Bestemmelse af termoplasts massesmelteindeks (MFR) og volumensmelteindeks (MVR) Del 1: Standardmetode
Dansk standard DS/EN ISO 1133-1 1. udgave 2012-01-25 Plast Bestemmelse af termoplasts massesmelteindeks (MFR) og volumensmelteindeks (MVR) Del 1: Standardmetode Plastics Determination of the melt mass-flow
Læs mereKrydderier og smagsstoffer Botanisk nomenklatur
Dansk standard DS/EN ISO 676 1. udgave 2009-07-23 Krydderier og smagsstoffer Botanisk nomenklatur Spices and condiments Botanical nomenclature DS/EN ISO 676 København DS projekt: M230052 ICS: 01.040.67;
Læs mereMaintenance Documentation for maintenance
Dansk standard DS/EN 13460 3. udgave 2009-12-15 Vedligehold Dokumentation for vedligehold Maintenance Documentation for maintenance DS/EN 13460 København DS projekt: M245239 ICS: 01.110; 21.020 Første
Læs mereJordbrug Traktorer Bagmonteret trepunktsophæng Kategori 1N, 1, 2N, 2, 3N, 3, 4N og 4
Dansk standard Tillæg DS/ISO 730/Amd 1 1. udgave 2014-08-05 Jordbrug Traktorer Bagmonteret trepunktsophæng Kategori 1N, 1, 2N, 2, 3N, 3, 4N og 4 Agricultural wheeled tractors Rear-mounted threepoint linkage
Læs mereTeknisk tegning Flowdiagrammer til procesanlæg Generelle regler
Dansk Standard DS/EN ISO 10628 1. udgave Godkendelsesblad Godkendt:2001-04-06 Teknisk tegning Flowdiagrammer til procesanlæg Generelle regler Flow diagrams for process plants General rules DANSK STANDARD
Læs mereCentrale strømforsyningssystemer
Dansk Standard DS/EN 50171 1. udgave 2001-08-29 Centrale strømforsyningssystemer Central power supply systems DS/EN 50171 København DS projekt: 30769 ICS: 29.200 Deskriptorer: belysning til nødudgang,elektriske
Læs mereDansk standard DS/EN Loft ladders Requirements, marking and testing. 1. udgave
Dansk standard DS/EN 14975 1. udgave 2007-02-26 Loftstiger Krav, mærkning og prøvning Loft ladders Requirements, marking and testing DS/EN 14975 København DS projekt: 55746 ICS: 97.145 Første del af denne
Læs merePalmeolie Bestemmelse af indeks for forringelse af blegningsevne (DOBI) samt bestemmelse af karotinindhold
Dansk standard DS/EN ISO 17932 2. udgave 2011-11-07 Palmeolie Bestemmelse af indeks for forringelse af blegningsevne (DOBI) samt bestemmelse af karotinindhold Palm oil Determination of the deterioration
Læs mereMaskinsikkerhed Elektrisk udstyr på maskiner Del 1: Generelle krav
Dansk standard Tillæg DS/EN 60204-1/A1 1. udgave 2009-03-13 Maskinsikkerhed Elektrisk udstyr på maskiner Del 1: Generelle krav Safety of machinery Electrical equipment of machines Part 1: General requirements
Læs mereLampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler
Dansk standard Tillæg DS/EN 60061-1/A41 (elektronisk) 1. udgave 2010-06-24 Lampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler Lamp caps and holders together
Læs mereMalinger og lakker Belysning og procedure for visuel vurdering af belægninger
Dansk standard DS/EN ISO 13076 1. udgave 2012-08-10 Malinger og lakker Belysning og procedure for visuel vurdering af belægninger Paints and varnishes Lighting and procedure for visual assessments of coatings
Læs mereGeometriske produktspecifikationer (GPS) Længdemåleudstyr højdemålere Design og metrologiske karakteristika
Dansk standard DS/EN ISO 13225 1. udgave 2012-05-23 Geometriske produktspecifikationer (GPS) Længdemåleudstyr højdemålere Design og metrologiske karakteristika Geometrical product specifications (GPS)
Læs mereMiljøledelsessystemer Kravbeskrivelse med råd om anvendelse
Dansk standard DS/EN ISO 14001 2. udgave 2004-11-30 Miljøledelsessystemer Kravbeskrivelse med råd om anvendelse Environmental management systems Requirements with guidance for use DS/EN ISO 14001 København
Læs mereDansk standard DS/EN Risk management Risk assessment techniques. 1. udgave
Dansk standard DS/EN 31010 1. udgave 2010-05-20 Risikoledelse Teknikker til risikovurdering Risk management Risk assessment techniques DS/EN 31010 København DS projekt: M231261 ICS: 03.100.01 Første del
Læs mereFritidsbåde Komfurer til flydende brændsel
Dansk standard DS/EN ISO 14895 1. udgave 2003-04-11 Fritidsbåde Komfurer til flydende brændsel Small craft Liquid-fuelled galley stoves DS/EN ISO 14895 København DS projekt: 47074 ICS: 47.080 Deskriptorer:
Læs mereSlanger og rør af gummi og plast Måling af fleksibilitet og stivhed Del 2: Bøjeprøvning ved lavere temperaturer end rumtemperatur
Dansk standard DS/EN ISO 10619-2 1. udgave 2012-01-24 Slanger og rør af gummi og plast Måling af fleksibilitet og stivhed Del 2: Bøjeprøvning ved lavere temperaturer end rumtemperatur Rubber and plastics
Læs mereElektrostatik Del 4-1: Standardprøvningsmetoder. anvendelser Gulvbelægningers og monterede gulves elektrostatiske egenskaber
Dansk standard Tillæg DS/EN 61340-4-1:2004/A1:2015 1. udgave 2015-06-23 Elektrostatik Del 4-1: Standardprøvningsmetoder for specifikke anvendelser Gulvbelægningers og monterede gulves elektrostatiske egenskaber
Læs mereMobil og bærbar DVB-T/H-radiotilslutning Del 2: Grænsefladeoverensstemmelsesprøvning
Dansk standard DS/EN 62002-2 1. udgave 2006-12-12 Mobil og bærbar DVB-T/H-radiotilslutning Del 2: Grænsefladeoverensstemmelsesprøvning Mobile and portable DVB-T/H radio access Part 2: Interface conformance
Læs mereMiljømærkning Egendeklaration af miljøpåstande (Type II miljømærkning)
Dansk standard Tillæg DS/EN ISO 14021/A1 1. udgave 2012-02-08 Miljømærkning Egendeklaration af miljøpåstande (Type II miljømærkning) Environmental labels and declarations Self-declared environmental claims
Læs mereLampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler
Dansk standard Tillæg DS/EN 60061-1/A47 (elektronisk) 1. udgave 2012-04-23 Lampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler Lamp caps and holders together
Læs mereDansk standard DS/EN Weibull analysis. 1. udgave
Dansk standard DS/EN 61649 1. udgave 2008-12-10 Weilbull-analyse Weibull analysis DS/EN 61649 København DS projekt: M219606 ICS: 03.120.30 Første del af denne publikations betegnelse er: DS/EN, hvilket
Læs mereBatchstyring Del 1: Modeller og terminologi
Dansk Standard DS/EN 61512-1 1. udgave 2001-08-29 Batchstyring Del 1: Modeller og terminologi Batch control Part 1: Models and terminology DS/EN 61512-1 København DS projekt: 26009 ICS: 25.040.40 Deskriptorer:
Læs mereCold rolled narrow steel strip Tolerances on dimensions and shape
Dansk standard DS/EN 10140 3. udgave 2009-06-02 Koldvalset båndstål Tolerancer for dimensioner og form Cold rolled narrow steel strip Tolerances on dimensions and shape DS/EN 10140 København DS projekt:
Læs mereBordtennis Del 2: Netstolper Krav og prøvningsmetoder
Dansk standard DS/EN 14468-2:2015 2. udgave 2015-04-29 Bordtennis Del 2: Netstolper Krav og prøvningsmetoder Table tennis Part 2: Posts for net assemblies Requirements and test methods DS/EN 14468-2:2015
Læs mereVinduer og døre Vandtæthed Klassifikation
Dansk Standard DS/EN 12208 1. udgave Godkendt:2000-12-29 Vinduer og døre Vandtæthed Klassifikation Windows and doors Watertightness Classification DANSK STANDARD - Eftertryk uden tilladelse forbudt Kollegievej
Læs mereTemperature Electromotive force (EMF) tables for pure-element thermocouple combinations
Dansk standard DS/EN 62460 1. udgave 2008-10-14 Temperatur Elektromotorisk kraft (EMF) Tabeller for kombinationer af rene termoelementer Temperature Electromotive force (EMF) tables for pure-element thermocouple
Læs mereRotordynamiske pumper Godkendelsesprøvning af hydraulisk ydeevne Klasse 1, 2 og 3
Dansk standard DS/EN ISO 9906 2. udgave 2012-06-08 Rotordynamiske pumper Godkendelsesprøvning af hydraulisk ydeevne Klasse 1, 2 og 3 Rotodynamic pumps Hydraulic performance acceptance tests Grades 1, 2
Læs mereØjenoptik Intraokulære linser Del 9: Multifokale intraokulære linser
Dansk standard Tillæg DS/EN ISO 11979-9/A1 1. udgave 2014-08-28 Øjenoptik Intraokulære linser Del 9: Multifokale intraokulære linser Ophthalmic implants Intraocular lenses Part 9: Multifocal intraocular
Læs mereKøkkengrej Grafiske symboler (piktogrammer)
Dansk standard DS/EN 14916 1. udgave 2005-11-14 Køkkengrej Grafiske symboler (piktogrammer) Domestic cookware Graphical symbols (pictograms) DS/EN 14916 København DS projekt: 55114 ICS: 01.080.20; 97.040.60
Læs mereGrænseflade for digital lyd Del 1: Generelt
Dansk standard DS/EN 60958-1 3. udgave 2008-10-31 Grænseflade for digital lyd Del 1: Generelt Digital audio interface Part 1: General DS/EN 60958-1 København DS projekt: M222433 ICS: 33.160.30 Første del
Læs merePackaging Flexible plastic/metal laminate tubes Dimensions and tolerances of nozzle S 13
Dansk standard DS/EN 14979 1. udgave 2006-03-31 Emballage Fleksible laminattuber af plast/metal Dimensioner og tolerancer for dyse S 13 Packaging Flexible plastic/metal laminate tubes Dimensions and tolerances
Læs mereBærbare motordrevne hækklippere Sikkerhed
Dansk standard Tillæg DS/EN ISO 10517/A1 1. udgave 2013-09-19 Bærbare motordrevne hækklippere Sikkerhed Powered hand-held hedge trimmers Safety DS/EN ISO 10517/A1 København DS projekt: M263321 ICS: 65.060.70
Læs mereØjenoptik Brillestel Målesystem og terminologi
Dansk standard Tillæg DS/EN ISO 8624:2011/A1:2015 1. udgave 2015-09-11 Øjenoptik Brillestel Målesystem og terminologi Ophthalmic optics Spectacle frames Measuring system and terminology DS/EN ISO 8624:2011/A1:2015
Læs merePrøvningsmetoder til hjælpekomponenter til murværk Del 4: Bestemmelse af lastkapacitet og lastnedbøjning i bjælkesko
Dansk standard DS/EN 846-4 + A1 2. udgave 2002-12-04 Prøvningsmetoder til hjælpekomponenter til murværk Del 4: Bestemmelse af lastkapacitet og lastnedbøjning i bjælkesko Methods of test for ancillary components
Læs mereKapslingsklasser (IP-kode)
Dansk Standard DS/EN 60529+A1 1. udgave 2002-04-05 Kapslingsklasser (IP-kode) Degrees of protection provided by enclosures (IP Code) DS/EN 60529+A1 København DS projekt: 47050 ICS: 29.020 Deskriptorer:
Læs mereWc-kummer og wc-møbler Tilslutningsdimensioner
Dansk standard DS/EN 33 3. udgave 2011-10-03 Wc-kummer og wc-møbler Tilslutningsdimensioner WC pans and WC suites Connecting dimensions DS/EN 33 København DS projekt: M235262 ICS: 91.140.70 Første del
Læs mereGeoteknisk undersøgelse og prøvning Driftsprøvning Del 3: Standard penetrationstest
Dansk standard Tillæg DS/EN ISO 22476-3/A1 1. udgave 2011-12-22 Geoteknisk undersøgelse og prøvning Driftsprøvning Del 3: Standard penetrationstest Geotechnical investigation and testing Field testing
Læs mereAkustik Deklarering og verificering af støj fra maskiner og udstyr
Dansk standard DS/EN ISO 4871 2. udgave 2009-09-09 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 4871:2009 Akustik Deklarering og verificering af støj fra maskiner og udstyr
Læs mereGrænseflade for digital lyd Del 1: Generelt
Dansk standard Tillæg DS/EN 60958-1/A1 1. udgave 2014-09-02 Grænseflade for digital lyd Del 1: Generelt Digital audio interface Part 1: General DS/EN 60958-1/A1 København DS projekt: M277911 ICS: 33.160.30
Læs mereUdstyr til tilslutning af belysningsarmaturer til husholdningsbrug o.l. Del 2: Normblade for DCL
Dansk standard DS/EN 61995-2 1. udgave 2009-06-10 Udstyr til tilslutning af belysningsarmaturer til husholdningsbrug o.l. Del 2: Normblade for DCL Devices for the connection of luminaires for household
Læs mereSteel castings Austenitic manganese steel castings
Dansk standard DS/EN 10349 1. udgave 2009-11-05 Stålstøbegods Austenitisk manganstålstøbegods Steel castings Austenitic manganese steel castings DS/EN 10349 København DS projekt: M220956 ICS: 77.140.80
Læs mereMultimedia quality Method of assessment of synchronization of audio and video
Dansk standard DS/EN 62503 1. udgave 2008-10-31 Multimediekvalitet Metode til fastsættelse af synkronisering mellem lyd og billede Multimedia quality Method of assessment of synchronization of audio and
Læs mereEurocode 1: Last på bærende konstruktioner Del 1-3: Generelle laster Snelast
Dansk standard DS/EN 1991-1-3 2. udgave 2007-06-22 Eurocode 1: Last på bærende konstruktioner Del 1-3: Generelle laster Snelast Eurocode 1 Actions on structures Part 1-3: General actions - Snow loads DS/EN
Læs mereControl technology Rules for the designation of measuring instruments
Dansk standard DS/EN 62419 1. udgave 2009-03-10 Styringsteknologi Regler for benævnelse af måleinstrumenter Control technology Rules for the designation of measuring instruments DS/EN 62419 København DS
Læs mereMalinger og lakker Bestemmelse af bestandighed mod cykliske korrosionsbetingelser Del 1: Vådt (salttåge)/tørt/fugtigt
Dansk standard DS/EN ISO 11997-1 1. udgave 2006-03-06 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 11997-1:2006 Malinger og lakker Bestemmelse af bestandighed mod cykliske
Læs mereIkke-destruktiv prøvning Lækprøvning Kriterier for valg af metode og teknik
Dansk Standard DS/EN 1779 2. udgave 2001-10-26 Ikke-destruktiv prøvning Lækprøvning Kriterier for valg af metode og teknik Non-destructive testing Leak testing Criteria for method and technique selection
Læs mereJernbaneanvendelser Datakommunikation, signallering og databehandling Del 1: Sikkerhedsrelateret kommunikation i lukkede transmissionssystemer
Dansk Standard DS/EN 50159-1 1. udgave 2001-10-31 Jernbaneanvendelser Datakommunikation, signallering og databehandling Del 1: Sikkerhedsrelateret kommunikation i lukkede transmissionssystemer Railway
Læs mereFacility Management Del 2: Vejledning i udarbejdelse af Facility Management-aftaler
Dansk standard DS/EN 15221-2 2. udgave 2008-06-30 Facility Management Del 2: Vejledning i udarbejdelse af Facility Management-aftaler Facility Management Part 2: Guidance on how to prepare Facility Management
Læs mereDansk Standard DS/EN udgave. Flymateriel
Dansk Standard DS/EN 3961 1. udgave Godkendt:2001-07-11 Flymateriel Aerospace series Gold base alloy AU-B40001 Filler metal for brazing-rolled foil DANSK STANDARD - Eftertryk uden tilladelse forbudt Kollegievej
Læs mereKlassifikation og betegnelse af dokumenter for fabriksanlæg, anlæg og udstyr Del 1: Regler og klassifikationstabeller
Dansk standard DS/EN 61355-1 2. udgave 2008-07-04 Klassifikation og betegnelse af dokumenter for fabriksanlæg, anlæg og udstyr Del 1: Regler og klassifikationstabeller Classification and designation of
Læs mereAkustik Støjreduktion Kabiner Laboratorie- og in situ-målinger
Dansk standard DS/EN ISO 11957 2. udgave 2009-09-22 Akustik Støjreduktion Kabiner Laboratorie- og in situ-målinger Acoustics Determination of sound insulation performance of cabins Laboratory and in situ
Læs mereFaste modstande til brug i elektronisk udstyr Del 1: Generisk specifikation
Dansk standard Tillæg DS/EN 60115-1:2011/ A11:2015 1. udgave 2015-05-18 Faste modstande til brug i elektronisk udstyr Del 1: Generisk specifikation Fixed resistors for use in electronic equipment Part
Læs mereSolcelleanlæg Termer, definitioner og symboler
DS-information DS/CLC/TS 61836 1. udgave 2009-06-26 Solcelleanlæg Termer, definitioner og symboler Solar photovoltaic energy systems Terms, definitions and symbols DS/CLC/TS 61836 København DS projekt:
Læs mereLedelse af pålidelighedsaktiviteter Del 3-11: Anvendelsesvejledning Pålidelighedscentreret vedligehold (RCM)
Dansk standard DS/EN 60300-3-11 1. udgave 2009-12-10 Ledelse af pålidelighedsaktiviteter Del 3-11: Anvendelsesvejledning Pålidelighedscentreret vedligehold (RCM) Dependability management Part 3-11: Application
Læs mereStyring af rumfartsprojekter. Generelle krav. Del 1: Politik og principper
Dansk Standard DS/EN 13290-1 1. udgave Godkendt:2000-04-13 Styring af rumfartsprojekter. Generelle krav. Del 1: Politik og principper Space project management - General requirements - Part 1: Policy and
Læs mereLegepladsredskaber og -underlag Del 11: Tredimensionelle klatrenet Supplerende specifikke sikkerhedskrav og prøvningsmetoder
Dansk standard DS/EN 1176-11 2. udgave 2009-04-22 Legepladsredskaber og -underlag Del 11: Tredimensionelle klatrenet Supplerende specifikke sikkerhedskrav og prøvningsmetoder Playground equipment and surfacing
Læs mereGeoteknisk undersøgelse og prøvning Identifikation og klassifikation af jord Del 2: Principper for klassificering
Dansk standard Tillæg DS/EN ISO 14688-2/A1 1. udgave 2013-09-23 Geoteknisk undersøgelse og prøvning Identifikation og klassifikation af jord Del 2: Principper for klassificering Geotechnical investigation
Læs mereElproducerende vindmøller Del 25-3: Kommunikationssystemer til overvågning og styring af vindmølleparker Modeller for informationsudveksling
Dansk standard DS/EN 61400-25-3 1. udgave 2007-04-27 Elproducerende vindmøller Del 25-3: Kommunikationssystemer til overvågning og styring af vindmølleparker Modeller for informationsudveksling Wind turbines
Læs mereMatematiske udtryk for pålidelighed, tilgængelighed og vedligehold samt for understøttelse af vedligehold
Dansk Standard DS/EN 61703 1. udgave 2002-05-01 Matematiske udtryk for pålidelighed, tilgængelighed og vedligehold samt for understøttelse af vedligehold Mathematical expressions for reliability,availability,
Læs mereIntegration af virksomhedens styringssystem Del 1: Modeller og terminologi
Dansk standard DS/EN 62264-1 1. udgave 2008-02-01 Integration af virksomhedens styringssystem Del 1: Modeller og terminologi Enterprise-control system integration DS/EN 62264-1 København DS projekt: M222179
Læs mereRulningslejer Tryklejer Grænsedimensioner,
Dansk standard DS/ISO 104:2015 1. udgave 2015-12-16 Rulningslejer Tryklejer Grænsedimensioner, overordnet plan Rolling bearings Thrust bearings Boundary dimensions, general plan DS/ISO 104:2015 København
Læs mereFritidsbåde Fastinstallerede brændstoftanke til benzin og diesel Tillæg 1
Dansk standard Tillæg DS/EN ISO 21487:2012/A1:2014 1. udgave 2014-12-17 Fritidsbåde Fastinstallerede brændstoftanke til benzin og diesel Tillæg 1 Small craft Permanently installed petrol and diesel fuel
Læs mereSkovbrugs- og havebrugsmaskiner Vibrationsprøvning af bærbare håndholdte maskiner med forbrændingsmotor Vibrationer ved håndtagene
Dansk standard DS/EN ISO 22867 3. udgave 2012-01-25 Skovbrugs- og havebrugsmaskiner Vibrationsprøvning af bærbare håndholdte maskiner med forbrændingsmotor Vibrationer ved håndtagene Forestry and gardening
Læs mereDansk standard DS/EN 13429. Packaging Reuse. 3. udgave 2006-10-12
Dansk standard DS/EN 13429 3. udgave 2006-10-12 Emballage Genbrug Packaging Reuse DS/EN 13429 København DS projekt: M215981 ICS: 13.030.50; 55.020 Første del af denne publikations betegnelse er: DS/EN,
Læs mereGrænseflade for digital lysstyring (DALI) Del 208: Særlige krav til kontroludstyr Omskifterfunktion (udstyrstype 7)
Dansk standard DS/EN 62386-208 1. udgave 2009-09-22 Grænseflade for digital lysstyring (DALI) Del 208: Særlige krav til kontroludstyr Omskifterfunktion (udstyrstype 7) Digital addressable lighting Interface
Læs mereHalvlederelementer Mekaniske og klimatiske prøvningsmetoder Del 33: Accelereret fugtbestandighed Objektiv autoklav
Dansk standard DS/EN 60749-33 1. udgave 2004-04-29 Halvlederelementer Mekaniske og klimatiske prøvningsmetoder Del 33: Accelereret fugtbestandighed Objektiv autoklav Semiconductor devices Mechanical and
Læs mereTilsatsmaterialer til svejsning Pulverfyldte elektroder til metallysbuesvejsning
Dansk standard DS/EN ISO 12153 1. udgave 2012-06-08 Tilsatsmaterialer til svejsning Pulverfyldte elektroder til metallysbuesvejsning med eller uden beskyttelsesgas af nikkel og nikkellegeringer Klassifikation
Læs mereLoddefri forbindelser Del 2: Krimpede forbindelser Generelle krav, prøvningsmetoder og praktisk vejledning
Dansk standard Tillæg DS/EN 60352-2/A1 1. udgave 2013-09-26 Loddefri forbindelser Del 2: Krimpede forbindelser Generelle krav, prøvningsmetoder og praktisk vejledning Solderless connections Part 2: Crimped
Læs mereSpecifikation og kvalificering af svejseprocedurer for metalliske materialer Kvalificering ved godkendelse af en standardsvejseprocedure
Dansk standard DS/EN ISO 15612 2. udgave 2005-12-22 Specifikation og kvalificering af svejseprocedurer for metalliske materialer Kvalificering ved godkendelse af en standardsvejseprocedure Specification
Læs mereStearinlys Produktsikkerhedsmærkning
Dansk standard DS/EN 15494 1. udgave 2007-11-12 Stearinlys Produktsikkerhedsmærkning Candles Product safety labels DS/EN 15494 København DS projekt: M212730 ICS: 13.120; 97.180 Første del af denne publikations
Læs mereStørrelser og enheder Del 13: Informationsvidenskab og -teknologi
Dansk standard DS/EN 80000-13 1. udgave 2008-08-22 Størrelser og enheder Del 13: Informationsvidenskab og -teknologi Quantities and units Part 13: Information science and technology DS/EN 80000-13 København
Læs mereKontormøbler Kontorstole Del 1: Mål Bestemmelse af dimensioner
Dansk Standard DS/EN 1335-1 2. udgave Godkendt: 2001-02-21 Kontormøbler Kontorstole Del 1: Mål Bestemmelse af dimensioner Office furniture Office work chair Part 1: Dimensions Determination of dimensions
Læs mereBogstavsymboler til brug i elektroteknologi Del 2: Telekommunikation og elektronik
Dansk standard DS/EN 60027-2 1. udgave 2007-05-15 Bogstavsymboler til brug i elektroteknologi Del 2: Telekommunikation og elektronik Letter symbols to be used in electrical technology Part 2: Telecommunications
Læs mereForkoblingsenheder for lysstofrør Krav til ydeevne
Dansk standard DS/EN 60921 2. udgave 2005-02-10 Forkoblingsenheder for lysstofrør Krav til ydeevne Ballasts for tubular fluorescent lamps Performance requirements DS/EN 60921 København DS projekt: 49567
Læs mereAudioudstyr og audiovisuelt udstyr Digitale audiodele Grundlæggende metoder til måling af audiokarakteristika Del 3: Professionel brug
Dansk standard DS/EN 61606-3 1. udgave 2008-12-12 Audioudstyr og audiovisuelt udstyr Digitale audiodele Grundlæggende metoder til måling af audiokarakteristika Del 3: Professionel brug Audio and audiovisual
Læs mereElmålingsudstyr (vekselstrøm) Særlige krav Del 23: Statiske målere til reaktiv energi (klasse 2 og 3)
Dansk standard DS/EN 62053-23 1. udgave 2003-04-11 Elmålingsudstyr (vekselstrøm) Særlige krav Del 23: Statiske målere til reaktiv energi (klasse 2 og 3) Electricity metering equipment (a.c.) Particular
Læs mereEurocode 7: Geoteknik Del 1: Generelle regler
Dansk standard Tillæg DS/EN 1997-1/A1 1. udgave 2014-02-03 Eurocode 7: Geoteknik Del 1: Generelle regler Eurocode 7: Geotechnical design Part 1: General rules DS/EN 1997-1/A1 København DS projekt: M267839
Læs mereidentifikation Betjeningsprincipper
Dansk standard DS/EN 60447 1. udgave 2005-03-01 Grundlæggende principper og sikkerhedsprincipper for mandmaskine-grænseflade, mærkning og identifikation Betjeningsprincipper Basic and safety principles
Læs mereTrækonstruktioner Bestemmelse af dyblers brudmoment
Dansk standard DS/EN 409 2. udgave 2009-06-24 Trækonstruktioner Bestemmelse af dyblers brudmoment Timber structures Test methods Determination of the yield moment of dowel type fasteners DS/EN 409 København
Læs mereKarakteristikker af DAB-modtagere
Dansk Standard DS/EN 50248 2. udgave 2001-12-11 Karakteristikker af DAB-modtagere Characteristics of DAB receivers DS/EN 50248 København DS projekt: 42051 ICS: 33.160.20 33.160.25 Deskriptorer: lydudsendelse,tv-udsendelse,satellit-udsendelse,digitale
Læs mereHjælpemidler til personer med funktionsevnenedsættelse Klassifikation og terminologi
Dansk standard DS/EN ISO 9999 6. udgave 2007-12-19 Hjælpemidler til personer med funktionsevnenedsættelse Klassifikation og terminologi Assistive products for persons with disability Classification and
Læs mereGødning Ekstraktion af vandopløseligt calcium, magnesium, natrium og svovl i form af sulfat
Dansk standard DS/EN 15961 1. udgave 2012-01-06 Gødning Ekstraktion af vandopløseligt calcium, magnesium, natrium og svovl i form af sulfat Fertilizers Extraction of water-soluble calcium, magnesium, sodium
Læs mereBæredygtighed inden for byggeri og anlæg Miljøvaredeklarationer (EPD) Kommunikationsformat: business-tobusiness
Dansk standard DS/EN 15942 1. udgave 2011-10-28 Bæredygtighed inden for byggeri og anlæg Miljøvaredeklarationer (EPD) Kommunikationsformat: business-tobusiness (B2B) Sustainability of construction works
Læs mereSikkerhed for forlystelser og forlystelsesudstyr Del 3: Krav om eftersyn ved konstruktion, fremstilling, drift og brug
Dansk standard DS/ISO 17842-3:2015 1. udgave 2015-08-06 Sikkerhed for forlystelser og forlystelsesudstyr Del 3: Krav om eftersyn ved konstruktion, fremstilling, drift og brug Safety of amusement rides
Læs mereTeknisk tegning Diagrammer til den kemiske og petrokemiske industri Del 2: Grafiske symboler
Dansk standard DS/EN ISO 10628-2 1. udgave 2012-12-19 Teknisk tegning Diagrammer til den kemiske og petrokemiske industri Del 2: Grafiske symboler Diagrams for the chemical and petrochemical industry Part
Læs mereAlarmsystemer Tryghedsalarmsystemer Del 5: Sammenkoblingsstik og kommunikation
Dansk standard DS/EN 50134-5 1. udgave 2004-12-03 Alarmsystemer Tryghedsalarmsystemer Del 5: Sammenkoblingsstik og kommunikation Alarm systems Social alarm systems Part 5: Interconnections and communications
Læs mereGlasfiberarmeret plast Bestemmelse af hårdhed ved hjælp af Barcol-hårdhedsmåler
Dansk standard DS/EN 59:2016 2. udgave 2016-02-26 Glasfiberarmeret plast Bestemmelse af hårdhed ved hjælp af Barcol-hårdhedsmåler Glass reinforced plastics Determination of indentation hardness by means
Læs mereTransportenheder ISO-containere Kode, identifikation og mærkning Tillæg 3
Dansk standard Tillæg DS/EN ISO 6346/A3 1. udgave 2013-01-22 Transportenheder ISO-containere Kode, identifikation og mærkning Tillæg 3 Freight containers Coding, identification and marking Amendment 3
Læs mereCOPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO/HL7 27953-1:2012
Dansk standard DS/EN ISO/HL7 27953-1 1. udgave 2012-02-24 Sundhedsinformatik Overvågning af lægemidlers bivirkninger Individuel bivirkningsrapport (ICSR) Del 1: Arkitektur for rapportering af utilsigtede
Læs mereAudioudstyr og audiovisuelt udstyr Digitale audiodele Grundlæggende metoder til måling af audiokarakteristika Del 4: Personlig computer
Dansk standard DS/EN 61606-4 1. udgave 2007-02-08 Audioudstyr og audiovisuelt udstyr Digitale audiodele Grundlæggende metoder til måling af audiokarakteristika Del 4: Personlig computer Audio and audiovisual
Læs mereRumfartssystemer Ordliste
Dansk standard DS/EN 16601-00-01:2015 1. udgave 2015-07-03 Rumfartssystemer Ordliste Space systems Glossary of terms DS/EN 16601-00-01:2015 København DS projekt: M274977 ICS: 01.040.49; 49.140 Første del
Læs mereTransportbånd Bestemmelse af trækstyrken for mekaniske forbindelser Statisk prøvningsmetode
Dansk Standard DS/EN ISO 1120 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION Transportbånd Bestemmelse af trækstyrken for mekaniske forbindelser Statisk prøvningsmetode Conveyor belts
Læs mere