Miljøprøvninger Del 3-1: Underbyggende dokumentation og vejledning Prøvninger med kulde og tør varme
|
|
- Agnete Astrup
- 5 år siden
- Visninger:
Transkript
1 Dansk standard DS/EN udgave Miljøprøvninger Del 3-1: Underbyggende dokumentation og vejledning Prøvninger med kulde og tør varme Environmental testing Part 3-1: Supporting documentation and guidance Cold and dry heat tests
2 DS/EN København DS projekt: M ICS: Første del af denne publikations betegnelse er: DS/EN, hvilket betyder, at det er en europæisk standard, der har status som dansk standard. Denne publikations overensstemmelse er: IDT med: IEC ED 2.0:2011. IDT med: EN :2011. DS-publikationen er på engelsk. Denne publikation erstatter: DS/EN :2001. DS-publikationstyper Dansk Standard udgiver forskellige publikationstyper. Typen på denne publikation fremgår af forsiden. Der kan være tale om: Dansk standard standard, der er udarbejdet på nationalt niveau, eller som er baseret på et andet lands nationale standard, eller standard, der er udarbejdet på internationalt og/eller europæisk niveau, og som har fået status som dansk standard DS-information publikation, der er udarbejdet på nationalt niveau, og som ikke har opnået status som standard, eller publikation, der er udarbejdet på internationalt og/eller europæisk niveau, og som ikke har fået status som standard, fx en teknisk rapport, eller europæisk præstandard DS-håndbog samling af standarder, eventuelt suppleret med informativt materiale DS-hæfte publikation med informativt materiale Til disse publikationstyper kan endvidere udgives tillæg og rettelsesblade DS-publikationsform Publikationstyperne udgives i forskellig form som henholdsvis fuldtekstpublikation (publikationen er trykt i sin helhed) godkendelsesblad (publikationen leveres i kopi med et trykt DS-omslag) elektronisk (publikationen leveres på et elektronisk medie) DS-betegnelse Alle DS-publikationers betegnelse begynder med DS efterfulgt af et eller flere præfikser og et nr., fx DS 383, DS/EN 5414 osv. Hvis der efter nr. er angivet et A eller Cor, betyder det, enten at det er et tillæg eller et rettelsesblad til hovedstandarden, eller at det er indført i hovedstandarden. DS-betegnelse angives på forsiden. Overensstemmelse med anden publikation: Overensstemmelse kan enten være IDT, EQV, NEQ eller MOD IDT: Når publikationen er identisk med en given publikation. EQV: Når publikationen teknisk er i overensstemmelse med en given publikation, men præsentationen er ændret. NEQ: Når publikationen teknisk eller præsentationsmæssigt ikke er i overensstemmelse med en given standard, men udarbejdet på baggrund af denne. MOD: Når publikationen er modificeret i forhold til en given publikation.
3 EUROPEAN STANDARD EN NORME EUROPÉENNE EUROPÄISCHE NORM November 2011 ICS Supersedes EN :1999 English version Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests (IEC :2011) Essais d'environnement - Partie 3-1: Documentation d'accompagnement et guide - Essais de froid et de chaleur sèche (CEI :2011) CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung Umgebungseinflüsse - Teil 3-1: Unterstützende Dokumentation und Leitfaden - Prüfverfahren Kälte und trockene Wärme (IEC :2011) This European Standard was approved by CENELEC on CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Management Centre: Avenue Marnix 17, B Brussels 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN :2011 E
4 EN : Foreword The text of document 104/555/FDIS, future edition 2 of IEC , prepared by IEC TC 104, "Environmental conditions, classification and methods of test", was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN :2011. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement latest date by which the national standards conflicting with the document have to be withdrawn This document supersedes EN :1999. (dop) (dow) The main changes with regard to EN :1999 are as follows: removal of guidance regarding thermal characteristics of chamber walls; revision of sections that address environmental chambers that do not use movement of air for temperature control. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC :2011 was approved by CENELEC as a European Standard without any modification.
5 - 3 - EN :2011 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC Environmental testing - EN Part 1: General and guidance IEC Environmental testing - EN Part 2-1: Tests - Test A: Cold IEC Environmental testing - Part 2-2: Tests - Test B: Dry heat EN
6
7 INTERNATIONAL STANDARD NORME INTERNATIONALE IEC Edition Environmental testing Part 3-1: Supporting documentation and guidance Cold and dry heat tests Essais d environnement Partie 3-1: Documentation d accompagnement et guide Essais de froid et de chaleur sèche IEC :2011
8 IEC:2011 CONTENTS FOREWORD Scope Normative references Terms and definitions Selection of test procedures General background General Ambient temperature Specimen temperatures Specimens without heat dissipation Specimens with heat dissipation Mechanisms of heat transfer Convection Radiation Thermal conduction Forced air circulation Test chambers General Methods of achieving the required conditions in the test chamber Measurements Temperature Air velocity...11 Annex A (informative) Effect of airflow on chamber conditions and on surface temperatures of test specimens...12 Figure 1 Experimental data on the effect of airflow on surface temperature of a wirewound resistor Radial airflow... 7 Figure 2 Experimental data on the effect of airflow on surface temperature of a wirewound resistor Axial airflow... 8 Figure 3 Temperature distribution on a cylinder with homogeneous heat generation in airflow of velocities 0,5, 1 and 2 m s Table 1 Influence parameters when testing heat-dissipating specimens...11
9 IEC: INTERNATIONAL ELECTROTECHNICAL COMMISSION ENVIRONMENTAL TESTING Part 3-1: Supporting documentation and guidance Cold and dry heat tests FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as IEC Publication(s) ). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and nongovernmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC has been prepared by IEC technical committee 104: Environmental conditions, classification and methods of test. This second edition cancels and replaces the first edition, published in 1974, and constitutes a technical revision. The main changes with regard to the previous edition are as follows: removal of guidance regarding thermal characteristics of chamber walls; revision of sections that address environmental chambers that do not use movement of air for temperature control.
10 IEC:2011 The text of this standard is based on the following documents: FDIS 104/555/FDIS Report on voting 104/558/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC series, under the general title Environmental testing can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under " in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended.
11 IEC: ENVIRONMENTAL TESTING Part 3-1: Supporting documentation and guidance Cold and dry heat tests 1 Scope This part of IEC provides guidance regarding the performance of cold and dry heat tests. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC , Environmental testing Part 1: General and guidance IEC , Environmental testing Part 2-1: Tests Test A: Cold IEC , Environmental testing Part 2-2: Tests Test B: Dry heat 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 heat-dissipating specimen specimen on which the hottest point on its surface, measured in free-air conditions and under the air pressure as specified in IEC , is more than 5 K above the ambient temperature of the surrounding atmosphere after thermal stability has been reached 3.2 non heat-dissipating specimen specimen that does not produce heat to a level that can affect the air temperature surrounding the specimen or those specimens located nearby 3.3 free-air conditions conditions within an infinite space where the movement of the air is affected only by the heatdissipating specimen 4 Selection of test procedures 4.1 General background General Specimen performance may be influenced or limited by the temperatures in which the specimen is operated. The level of influence may be affected by test gradients that exist within the test system (climatic or environmental chamber) and internal temperatures within
Dansk standard DS/EN ISO udgave Campingtelte. Camping tents
Dansk standard DS/EN ISO 5912 2. udgave 2011-11-22 Campingtelte Camping tents DS/EN ISO 5912 København DS projekt: M245636 ICS: 97.200.30 Første del af denne publikations betegnelse er: DS/EN ISO, hvilket
Læs mereTekniske specifikationer for centrifugalpumper Klasse III
Dansk standard Tillæg DS/EN ISO 9908/A1 1. udgave 2011-06-08 Tekniske specifikationer for centrifugalpumper Klasse III Technical specifications for centrifugal pumps Class III Amendment 1 DS/EN ISO 9908/A1
Læs mereKosmetik Metoder til prøvning af solbeskyttelse In vivo-bestemmelse af UVA-beskyttelse
Dansk standard DS/EN ISO 24442 1. udgave 2012-02-01 Kosmetik Metoder til prøvning af solbeskyttelse In vivo-bestemmelse af UVA-beskyttelse Cosmetics Sun protection test methods In vivo determination of
Læs merePapir og karton Bestemmelse af tykkelse, densitet og massevolumen
Dansk standard DS/EN ISO 534 1. udgave 2012-01-04 Papir og karton Bestemmelse af tykkelse, densitet og massevolumen Paper and board Determination of thickness, density and specific volume DS/EN ISO 534
Læs mereDansk standard DS/EN Risk management Risk assessment techniques. 1. udgave
Dansk standard DS/EN 31010 1. udgave 2010-05-20 Risikoledelse Teknikker til risikovurdering Risk management Risk assessment techniques DS/EN 31010 København DS projekt: M231261 ICS: 03.100.01 Første del
Læs mereMaintenance Documentation for maintenance
Dansk standard DS/EN 13460 3. udgave 2009-12-15 Vedligehold Dokumentation for vedligehold Maintenance Documentation for maintenance DS/EN 13460 København DS projekt: M245239 ICS: 01.110; 21.020 Første
Læs mereDansk standard DS/EN Weibull analysis. 1. udgave
Dansk standard DS/EN 61649 1. udgave 2008-12-10 Weilbull-analyse Weibull analysis DS/EN 61649 København DS projekt: M219606 ICS: 03.120.30 Første del af denne publikations betegnelse er: DS/EN, hvilket
Læs mereMaskinsikkerhed Elektrisk udstyr på maskiner Del 1: Generelle krav
Dansk standard Tillæg DS/EN 60204-1/A1 1. udgave 2009-03-13 Maskinsikkerhed Elektrisk udstyr på maskiner Del 1: Generelle krav Safety of machinery Electrical equipment of machines Part 1: General requirements
Læs mereBatchstyring Del 1: Modeller og terminologi
Dansk Standard DS/EN 61512-1 1. udgave 2001-08-29 Batchstyring Del 1: Modeller og terminologi Batch control Part 1: Models and terminology DS/EN 61512-1 København DS projekt: 26009 ICS: 25.040.40 Deskriptorer:
Læs mereCentrale strømforsyningssystemer
Dansk Standard DS/EN 50171 1. udgave 2001-08-29 Centrale strømforsyningssystemer Central power supply systems DS/EN 50171 København DS projekt: 30769 ICS: 29.200 Deskriptorer: belysning til nødudgang,elektriske
Læs merePulvermaling Del 7: Bestemmelse af massetab efter ophedning i ovn
Dansk standard DS/EN ISO 8130-7 1. udgave 2011-01-21 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 8130-7:2011 Pulvermaling Del 7: Bestemmelse af massetab efter ophedning
Læs mereKrydderier og smagsstoffer Botanisk nomenklatur
Dansk standard DS/EN ISO 676 1. udgave 2009-07-23 Krydderier og smagsstoffer Botanisk nomenklatur Spices and condiments Botanical nomenclature DS/EN ISO 676 København DS projekt: M230052 ICS: 01.040.67;
Læs merePlast Bestemmelse af termoplasts massesmelteindeks (MFR) og volumensmelteindeks (MVR) Del 1: Standardmetode
Dansk standard DS/EN ISO 1133-1 1. udgave 2012-01-25 Plast Bestemmelse af termoplasts massesmelteindeks (MFR) og volumensmelteindeks (MVR) Del 1: Standardmetode Plastics Determination of the melt mass-flow
Læs mereTemperature Electromotive force (EMF) tables for pure-element thermocouple combinations
Dansk standard DS/EN 62460 1. udgave 2008-10-14 Temperatur Elektromotorisk kraft (EMF) Tabeller for kombinationer af rene termoelementer Temperature Electromotive force (EMF) tables for pure-element thermocouple
Læs mereLampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler
Dansk standard Tillæg DS/EN 60061-1/A41 (elektronisk) 1. udgave 2010-06-24 Lampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler Lamp caps and holders together
Læs mereMobil og bærbar DVB-T/H-radiotilslutning Del 2: Grænsefladeoverensstemmelsesprøvning
Dansk standard DS/EN 62002-2 1. udgave 2006-12-12 Mobil og bærbar DVB-T/H-radiotilslutning Del 2: Grænsefladeoverensstemmelsesprøvning Mobile and portable DVB-T/H radio access Part 2: Interface conformance
Læs mereElektrostatik Del 4-1: Standardprøvningsmetoder. anvendelser Gulvbelægningers og monterede gulves elektrostatiske egenskaber
Dansk standard Tillæg DS/EN 61340-4-1:2004/A1:2015 1. udgave 2015-06-23 Elektrostatik Del 4-1: Standardprøvningsmetoder for specifikke anvendelser Gulvbelægningers og monterede gulves elektrostatiske egenskaber
Læs mereMajs Bestemmelse af vandindhold (i forarbejdet korn og i hele korn)
Dansk standard DS/EN ISO 6540 1. udgave 2010-06-23 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 6540:2010 Majs Bestemmelse af vandindhold (i forarbejdet korn og i hele
Læs mereLampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler
Dansk standard Tillæg DS/EN 60061-1/A47 (elektronisk) 1. udgave 2012-04-23 Lampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler Lamp caps and holders together
Læs mereKapslingsklasser (IP-kode)
Dansk Standard DS/EN 60529+A1 1. udgave 2002-04-05 Kapslingsklasser (IP-kode) Degrees of protection provided by enclosures (IP Code) DS/EN 60529+A1 København DS projekt: 47050 ICS: 29.020 Deskriptorer:
Læs mereTeknisk tegning Flowdiagrammer til procesanlæg Generelle regler
Dansk Standard DS/EN ISO 10628 1. udgave Godkendelsesblad Godkendt:2001-04-06 Teknisk tegning Flowdiagrammer til procesanlæg Generelle regler Flow diagrams for process plants General rules DANSK STANDARD
Læs mereControl technology Rules for the designation of measuring instruments
Dansk standard DS/EN 62419 1. udgave 2009-03-10 Styringsteknologi Regler for benævnelse af måleinstrumenter Control technology Rules for the designation of measuring instruments DS/EN 62419 København DS
Læs mereGrænseflade for digital lyd Del 1: Generelt
Dansk standard DS/EN 60958-1 3. udgave 2008-10-31 Grænseflade for digital lyd Del 1: Generelt Digital audio interface Part 1: General DS/EN 60958-1 København DS projekt: M222433 ICS: 33.160.30 Første del
Læs mereDansk standard DS/EN Loft ladders Requirements, marking and testing. 1. udgave
Dansk standard DS/EN 14975 1. udgave 2007-02-26 Loftstiger Krav, mærkning og prøvning Loft ladders Requirements, marking and testing DS/EN 14975 København DS projekt: 55746 ICS: 97.145 Første del af denne
Læs mereGrænseflade for digital lyd Del 1: Generelt
Dansk standard Tillæg DS/EN 60958-1/A1 1. udgave 2014-09-02 Grænseflade for digital lyd Del 1: Generelt Digital audio interface Part 1: General DS/EN 60958-1/A1 København DS projekt: M277911 ICS: 33.160.30
Læs mereMultimedia quality Method of assessment of synchronization of audio and video
Dansk standard DS/EN 62503 1. udgave 2008-10-31 Multimediekvalitet Metode til fastsættelse af synkronisering mellem lyd og billede Multimedia quality Method of assessment of synchronization of audio and
Læs mereSolcelleanlæg Termer, definitioner og symboler
DS-information DS/CLC/TS 61836 1. udgave 2009-06-26 Solcelleanlæg Termer, definitioner og symboler Solar photovoltaic energy systems Terms, definitions and symbols DS/CLC/TS 61836 København DS projekt:
Læs mereUdstyr til tilslutning af belysningsarmaturer til husholdningsbrug o.l. Del 2: Normblade for DCL
Dansk standard DS/EN 61995-2 1. udgave 2009-06-10 Udstyr til tilslutning af belysningsarmaturer til husholdningsbrug o.l. Del 2: Normblade for DCL Devices for the connection of luminaires for household
Læs mereLedelse af pålidelighedsaktiviteter Del 3-11: Anvendelsesvejledning Pålidelighedscentreret vedligehold (RCM)
Dansk standard DS/EN 60300-3-11 1. udgave 2009-12-10 Ledelse af pålidelighedsaktiviteter Del 3-11: Anvendelsesvejledning Pålidelighedscentreret vedligehold (RCM) Dependability management Part 3-11: Application
Læs mereHalvlederelementer Mekaniske og klimatiske prøvningsmetoder Del 33: Accelereret fugtbestandighed Objektiv autoklav
Dansk standard DS/EN 60749-33 1. udgave 2004-04-29 Halvlederelementer Mekaniske og klimatiske prøvningsmetoder Del 33: Accelereret fugtbestandighed Objektiv autoklav Semiconductor devices Mechanical and
Læs mereLoddefri forbindelser Del 2: Krimpede forbindelser Generelle krav, prøvningsmetoder og praktisk vejledning
Dansk standard Tillæg DS/EN 60352-2/A1 1. udgave 2013-09-26 Loddefri forbindelser Del 2: Krimpede forbindelser Generelle krav, prøvningsmetoder og praktisk vejledning Solderless connections Part 2: Crimped
Læs mereDansk Standard DS/EN 61595-3 1. udgave. COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN 61595-3:2001
Dansk Standard DS/EN 61595-3 1. udgave Godkendt:2001-05-18 Digitalt lydbåndoptagersystem med flere kanaler (DATR), spoletil-spolesystem, til professionelt brug Del 3: 24-bits funktion til 16-bits medier
Læs merePalmeolie Bestemmelse af indeks for forringelse af blegningsevne (DOBI) samt bestemmelse af karotinindhold
Dansk standard DS/EN ISO 17932 2. udgave 2011-11-07 Palmeolie Bestemmelse af indeks for forringelse af blegningsevne (DOBI) samt bestemmelse af karotinindhold Palm oil Determination of the deterioration
Læs mereMiljøledelsessystemer Kravbeskrivelse med råd om anvendelse
Dansk standard DS/EN ISO 14001 2. udgave 2004-11-30 Miljøledelsessystemer Kravbeskrivelse med råd om anvendelse Environmental management systems Requirements with guidance for use DS/EN ISO 14001 København
Læs mereFritidsbåde Komfurer til flydende brændsel
Dansk standard DS/EN ISO 14895 1. udgave 2003-04-11 Fritidsbåde Komfurer til flydende brændsel Small craft Liquid-fuelled galley stoves DS/EN ISO 14895 København DS projekt: 47074 ICS: 47.080 Deskriptorer:
Læs mereKlassifikation og betegnelse af dokumenter for fabriksanlæg, anlæg og udstyr Del 1: Regler og klassifikationstabeller
Dansk standard DS/EN 61355-1 2. udgave 2008-07-04 Klassifikation og betegnelse af dokumenter for fabriksanlæg, anlæg og udstyr Del 1: Regler og klassifikationstabeller Classification and designation of
Læs mereCold rolled narrow steel strip Tolerances on dimensions and shape
Dansk standard DS/EN 10140 3. udgave 2009-06-02 Koldvalset båndstål Tolerancer for dimensioner og form Cold rolled narrow steel strip Tolerances on dimensions and shape DS/EN 10140 København DS projekt:
Læs mereMatematiske udtryk for pålidelighed, tilgængelighed og vedligehold samt for understøttelse af vedligehold
Dansk Standard DS/EN 61703 1. udgave 2002-05-01 Matematiske udtryk for pålidelighed, tilgængelighed og vedligehold samt for understøttelse af vedligehold Mathematical expressions for reliability,availability,
Læs mereStørrelser og enheder Del 13: Informationsvidenskab og -teknologi
Dansk standard DS/EN 80000-13 1. udgave 2008-08-22 Størrelser og enheder Del 13: Informationsvidenskab og -teknologi Quantities and units Part 13: Information science and technology DS/EN 80000-13 København
Læs mereIntegration af virksomhedens styringssystem Del 1: Modeller og terminologi
Dansk standard DS/EN 62264-1 1. udgave 2008-02-01 Integration af virksomhedens styringssystem Del 1: Modeller og terminologi Enterprise-control system integration DS/EN 62264-1 København DS projekt: M222179
Læs mereSlanger og rør af gummi og plast Måling af fleksibilitet og stivhed Del 2: Bøjeprøvning ved lavere temperaturer end rumtemperatur
Dansk standard DS/EN ISO 10619-2 1. udgave 2012-01-24 Slanger og rør af gummi og plast Måling af fleksibilitet og stivhed Del 2: Bøjeprøvning ved lavere temperaturer end rumtemperatur Rubber and plastics
Læs mereElmålingsudstyr (vekselstrøm) Særlige krav Del 23: Statiske målere til reaktiv energi (klasse 2 og 3)
Dansk standard DS/EN 62053-23 1. udgave 2003-04-11 Elmålingsudstyr (vekselstrøm) Særlige krav Del 23: Statiske målere til reaktiv energi (klasse 2 og 3) Electricity metering equipment (a.c.) Particular
Læs mereElproducerende vindmøller Del 25-3: Kommunikationssystemer til overvågning og styring af vindmølleparker Modeller for informationsudveksling
Dansk standard DS/EN 61400-25-3 1. udgave 2007-04-27 Elproducerende vindmøller Del 25-3: Kommunikationssystemer til overvågning og styring af vindmølleparker Modeller for informationsudveksling Wind turbines
Læs mereGeometriske produktspecifikationer (GPS) Længdemåleudstyr højdemålere Design og metrologiske karakteristika
Dansk standard DS/EN ISO 13225 1. udgave 2012-05-23 Geometriske produktspecifikationer (GPS) Længdemåleudstyr højdemålere Design og metrologiske karakteristika Geometrical product specifications (GPS)
Læs mereAudioudstyr og audiovisuelt udstyr Digitale audiodele Grundlæggende metoder til måling af audiokarakteristika Del 3: Professionel brug
Dansk standard DS/EN 61606-3 1. udgave 2008-12-12 Audioudstyr og audiovisuelt udstyr Digitale audiodele Grundlæggende metoder til måling af audiokarakteristika Del 3: Professionel brug Audio and audiovisual
Læs mereMiljøprøvninger Del 2-82: Prøvninger Tx-prøvning: Whisker-prøvningsmetoder til elektroniske og elektriske komponenter
Dansk standard DS/EN 60068-2-82 1. udgave 2007-07-02 Miljøprøvninger Del 2-82: Prøvninger Tx-prøvning: Whisker-prøvningsmetoder til elektroniske og elektriske komponenter Environmental testing Part 2-82:
Læs merePrøvningsmetoder til hjælpekomponenter til murværk Del 4: Bestemmelse af lastkapacitet og lastnedbøjning i bjælkesko
Dansk standard DS/EN 846-4 + A1 2. udgave 2002-12-04 Prøvningsmetoder til hjælpekomponenter til murværk Del 4: Bestemmelse af lastkapacitet og lastnedbøjning i bjælkesko Methods of test for ancillary components
Læs mereGrænseflade for digital lysstyring (DALI) Del 208: Særlige krav til kontroludstyr Omskifterfunktion (udstyrstype 7)
Dansk standard DS/EN 62386-208 1. udgave 2009-09-22 Grænseflade for digital lysstyring (DALI) Del 208: Særlige krav til kontroludstyr Omskifterfunktion (udstyrstype 7) Digital addressable lighting Interface
Læs mereForkoblingsenheder for lysstofrør Krav til ydeevne
Dansk standard DS/EN 60921 2. udgave 2005-02-10 Forkoblingsenheder for lysstofrør Krav til ydeevne Ballasts for tubular fluorescent lamps Performance requirements DS/EN 60921 København DS projekt: 49567
Læs mereVinduer og døre Vandtæthed Klassifikation
Dansk Standard DS/EN 12208 1. udgave Godkendt:2000-12-29 Vinduer og døre Vandtæthed Klassifikation Windows and doors Watertightness Classification DANSK STANDARD - Eftertryk uden tilladelse forbudt Kollegievej
Læs mereInstrumenttransformere Del 8: Elektroniske strømtransformere
Dansk standard DS/EN 60044-8 1. udgave 2002-10-24 Instrumenttransformere Del 8: Elektroniske strømtransformere Instrument transformers - Part 8: Electronic current transformers DS/EN 60044-8 København
Læs mereBogstavsymboler til brug i elektroteknologi Del 2: Telekommunikation og elektronik
Dansk standard DS/EN 60027-2 1. udgave 2007-05-15 Bogstavsymboler til brug i elektroteknologi Del 2: Telekommunikation og elektronik Letter symbols to be used in electrical technology Part 2: Telecommunications
Læs mereMalinger og lakker Belysning og procedure for visuel vurdering af belægninger
Dansk standard DS/EN ISO 13076 1. udgave 2012-08-10 Malinger og lakker Belysning og procedure for visuel vurdering af belægninger Paints and varnishes Lighting and procedure for visual assessments of coatings
Læs mereAudioudstyr og audiovisuelt udstyr Digitale audiodele Grundlæggende metoder til måling af audiokarakteristika Del 4: Personlig computer
Dansk standard DS/EN 61606-4 1. udgave 2007-02-08 Audioudstyr og audiovisuelt udstyr Digitale audiodele Grundlæggende metoder til måling af audiokarakteristika Del 4: Personlig computer Audio and audiovisual
Læs mereBrændselsceller Del 3-3: Stationære brændselscellesystemer Installation
Dansk standard DS/EN 62282-3-3 1. udgave 2008-03-25 Brændselsceller Del 3-3: Stationære brændselscellesystemer Installation Fuel cell technologies Part 3-3: Stationary fuel cell power systems Installation
Læs mereIkke-destruktiv prøvning Lækprøvning Kriterier for valg af metode og teknik
Dansk Standard DS/EN 1779 2. udgave 2001-10-26 Ikke-destruktiv prøvning Lækprøvning Kriterier for valg af metode og teknik Non-destructive testing Leak testing Criteria for method and technique selection
Læs mereEnergiledelsessystemets grænseflade til applikationsprogrammer (EMS-API) Del 453: CIM-baseret grafisk udveksling
Dansk standard DS/EN 61970-453 1. udgave 2008-09-26 Energiledelsessystemets grænseflade til applikationsprogrammer (EMS-API) Del 453: CIM-baseret grafisk udveksling Energy management system application
Læs mereHøjspændingskoblingsudstyr Del 102: Højspændingsadskillere og jordsluttere til vekselstrøm
Dansk standard Tillæg DS/EN 62271-102/A2 1. udgave 2013-06-07 Højspændingskoblingsudstyr Del 102: Højspændingsadskillere og jordsluttere til vekselstrøm High-voltage switchgear and controlgear Part 102:
Læs mereMiljøprøvninger Del 2-64: Prøvninger Prøvning Fh: Vibration, vilkårlig bredbånd og vejledning
Dansk standard DS/EN 60068-2-64 2. udgave 2008-09-29 Miljøprøvninger Del 2-64: Prøvninger Prøvning Fh: Vibration, vilkårlig bredbånd og vejledning Environmental testing Part 2-64: Tests Test Fh: Vibration,
Læs mereDansk standard DS/EN
Dansk standard DS/EN 60512-16-5 1. udgave 2008-11-07 Konnektorer til elektronisk udstyr Prøvninger og målinger Del 16-5: Mekaniske prøvninger af kontakter og afslutninger Prøvning 16e: Tilbagetrækningskraft
Læs merePackaging Flexible plastic/metal laminate tubes Dimensions and tolerances of nozzle S 13
Dansk standard DS/EN 14979 1. udgave 2006-03-31 Emballage Fleksible laminattuber af plast/metal Dimensioner og tolerancer for dyse S 13 Packaging Flexible plastic/metal laminate tubes Dimensions and tolerances
Læs mereFaste modstande til brug i elektronisk udstyr Del 1: Generisk specifikation
Dansk standard Tillæg DS/EN 60115-1:2011/ A11:2015 1. udgave 2015-05-18 Faste modstande til brug i elektronisk udstyr Del 1: Generisk specifikation Fixed resistors for use in electronic equipment Part
Læs mereCrystalline silicon terrestrial photovoltaic (PV) modules Design qualification and type approval
Dansk standard DS/EN 61215 2. udgave 2005-06-30 Krystallinske silicium-moduler til anvendelse på jorden Konstruktionskvalifikation og typegodkendelse Crystalline silicon terrestrial photovoltaic (PV) modules
Læs mereRotordynamiske pumper Godkendelsesprøvning af hydraulisk ydeevne Klasse 1, 2 og 3
Dansk standard DS/EN ISO 9906 2. udgave 2012-06-08 Rotordynamiske pumper Godkendelsesprøvning af hydraulisk ydeevne Klasse 1, 2 og 3 Rotodynamic pumps Hydraulic performance acceptance tests Grades 1, 2
Læs mereSuperledning Del 10: Måling af kritisk temperatur Kritisk temperatur for sammensatte superledere målt ved en modstandsmetode
Dansk standard DS/EN 61788-10 2. udgave 2006-12-11 Superledning Del 10: Måling af kritisk temperatur Kritisk temperatur for sammensatte superledere målt ved en modstandsmetode Superconductivity Part 10:
Læs mereElproducerende vindmøller Del 3: Konstruktionskrav til offshorevindmøller
Dansk standard DS/EN 61400-3 1. udgave 2009-07-03 Elproducerende vindmøller Del 3: Konstruktionskrav til offshorevindmøller Wind turbines Part 3: Design requirements for offshore wind turbines DS/EN 61400-3
Læs mereAssessment of lighting equipment related to human exposure to electromagnetic fields
Dansk standard DS/EN 62493 1. udgave 2010-02-26 Vurdering af belysningsudstyr med hensyn til personeksponering for elektromagnetiske felter Assessment of lighting equipment related to human exposure to
Læs mereLavspændingssikringer Del 1: Generelle krav
Dansk standard DS/EN 60269-1 3. udgave 2007-06-19 Lavspændingssikringer Del 1: Generelle krav Low-voltage fuses Part 1: General requirements DS/EN 60269-1 København DS projekt: M205966 ICS: 29.120.50 Første
Læs mereDansk standard DS/EN
Dansk standard DS/EN 60512-16-4 1. udgave 2008-09-26 Konnektorer til elektronisk udstyr Prøvninger og målinger Del 16-4: Mekaniske prøvninger på kontakter og afslutninger Prøvning 16d: Brudstyrke (krimpede
Læs mereidentifikation Betjeningsprincipper
Dansk standard DS/EN 60447 1. udgave 2005-03-01 Grundlæggende principper og sikkerhedsprincipper for mandmaskine-grænseflade, mærkning og identifikation Betjeningsprincipper Basic and safety principles
Læs merePrintkort og printkortsamlinger Konstruktion og brug Del 7: 0-orientering af elektroniske komponenter til opbygning af CADbibliotek
Dansk standard DS/EN 61188-7 1. udgave 2009-07-24 Printkort og printkortsamlinger Konstruktion og brug Del 7: 0-orientering af elektroniske komponenter til opbygning af CADbibliotek Printed boards and
Læs mereFysiske størrelser og enheder Del 14: Telebiometri relateret til human fysiologi
Dansk standard DS/EN 80000-14 1. udgave 2009-05-27 Fysiske størrelser og enheder Del 14: Telebiometri relateret til human fysiologi Quantities and units Part 14: Telebiometrics related to human physiology
Læs mereShuntkondensatorer til vekselstrømskraftsystemer
Dansk standard DS/EN 60871-1 2. udgave 2005-12-09 Shuntkondensatorer til vekselstrømskraftsystemer med en nominel spænding på over 1000 V Del 1: Generelt Shunt capacitors for a.c. power systems having
Læs mereJernbaneanvendelser Datakommunikation, signallering og databehandling Del 1: Sikkerhedsrelateret kommunikation i lukkede transmissionssystemer
Dansk Standard DS/EN 50159-1 1. udgave 2001-10-31 Jernbaneanvendelser Datakommunikation, signallering og databehandling Del 1: Sikkerhedsrelateret kommunikation i lukkede transmissionssystemer Railway
Læs mereFacility Management Del 2: Vejledning i udarbejdelse af Facility Management-aftaler
Dansk standard DS/EN 15221-2 2. udgave 2008-06-30 Facility Management Del 2: Vejledning i udarbejdelse af Facility Management-aftaler Facility Management Part 2: Guidance on how to prepare Facility Management
Læs mereAnalysis techniques for system reliability Procedure for failure mode and effects analysis (FMEA)
Dansk standard DS/EN 60812 1. udgave 2006-05-30 Analyseteknikker for systemers pålidelighed Procedurer for fejlog resultatanalyse (FMEA) Analysis techniques for system reliability Procedure for failure
Læs mereLedere af isolerende kabler
Dansk standard Rettelsesblad DS/EN 60228/AC:2005 1. udgave Ledere af isolerende kabler Conductors of insulated cables DS/EN 60228/AC:2005 København DS projekt: M290250 ICS: 29.060.01 Første del af denne
Læs mereVedligehold af udstyr Del 3: Verifikation og indsamling, analyse og præsentation af data
Dansk standard DS/EN 60706-3 1. udgave 2007-02-02 Vedligehold af udstyr Del 3: Verifikation og indsamling, analyse og præsentation af data Maintainability of equipment Part 3: Verification and collection,
Læs merePålidelighedssortering under stress Del 1: Reparable produkter fremstillet i partier
Dansk standard DS/EN 61163-1 1. udgave 2007-02-01 Pålidelighedssortering under stress Del 1: Reparable produkter fremstillet i partier Reliability stress screening Part 1: Repairable assemblies manufactured
Læs mereDansk standard DS/EN
Dansk standard DS/EN 60534-2-5 1. udgave 2003-12-22 Reguleringsventiler til industrielle processer Del 2-5: Gennemstrømningskapacitet Dimensionsligninger for væskestrømme gennem flertrinsreguleringsventiler
Læs mereBordtennis Del 2: Netstolper Krav og prøvningsmetoder
Dansk standard DS/EN 14468-2:2015 2. udgave 2015-04-29 Bordtennis Del 2: Netstolper Krav og prøvningsmetoder Table tennis Part 2: Posts for net assemblies Requirements and test methods DS/EN 14468-2:2015
Læs mereWc-kummer og wc-møbler Tilslutningsdimensioner
Dansk standard DS/EN 33 3. udgave 2011-10-03 Wc-kummer og wc-møbler Tilslutningsdimensioner WC pans and WC suites Connecting dimensions DS/EN 33 København DS projekt: M235262 ICS: 91.140.70 Første del
Læs mereRoterende elektriske maskiner Del 20-1: Reguleringsmotorer Stepmotorer
DS-information DS/CLC/TS 60034-20-1 1. udgave 2004-10-08 Roterende elektriske maskiner Del 20-1: Reguleringsmotorer Stepmotorer Rotating electrical machines Part 20-1: Control motors - Stepping motors
Læs mereVejledning i udarbejdelse og brug af undervisningsmateriale til elektromedicinsk
DS-information DS/IEC/TR 61258 1. udgave 2008-09-19 Vejledning i udarbejdelse og brug af undervisningsmateriale til elektromedicinsk udstyr Guidelines for the development and use of medical electrical
Læs mereCommissioning of electrical, instrumentation and control systems in the process industry Specific phases and milestones
Dansk standard DS/EN 62337 1. udgave 2007-05-21 Idriftsættelse af elektriske instrumenterings- og styringssystemer i procesindustrien Specifikke faser og milepæle Commissioning of electrical, instrumentation
Læs mereLegepladsredskaber og -underlag Del 11: Tredimensionelle klatrenet Supplerende specifikke sikkerhedskrav og prøvningsmetoder
Dansk standard DS/EN 1176-11 2. udgave 2009-04-22 Legepladsredskaber og -underlag Del 11: Tredimensionelle klatrenet Supplerende specifikke sikkerhedskrav og prøvningsmetoder Playground equipment and surfacing
Læs mereApplikationsintegration på elværker Systemgrænseflader til distributionsstyring
Dansk standard DS/EN 61968-9 1. udgave 2010-02-19 Applikationsintegration på elværker Systemgrænseflader til distributionsstyring Del 9: Grænseflade til måleraflæsning og -styring Application integration
Læs mereidentifikation Identifikation af ledere ved farver eller cifre
Dansk standard DS/EN 60446 2. udgave 2007-07-25 Grundlæggende principper og sikkerhedsprincipper for mandmaskine-interface, mærkning og identifikation Identifikation af ledere ved farver eller cifre Basic
Læs mereLavspændingstavler Del 2: Effektfordelingstavler
Dansk standard DS/EN 61439-2 1. udgave 2009-12-02 Lavspændingstavler Del 2: Effektfordelingstavler Low-voltage switchgear and controlgear assemblies Part 2: Power switchgear and controlgear assemblies
Læs mereEurocode 1: Last på bærende konstruktioner Del 1-3: Generelle laster Snelast
Dansk standard DS/EN 1991-1-3 2. udgave 2007-06-22 Eurocode 1: Last på bærende konstruktioner Del 1-3: Generelle laster Snelast Eurocode 1 Actions on structures Part 1-3: General actions - Snow loads DS/EN
Læs mereElektroakustik Høreapparater Del 7: Måling af funktionsdata ved kvalitetskontrol i forbindelse med leverancer
Dansk standard DS/EN 60118-7 2. udgave 2006-02-08 Elektroakustik Høreapparater Del 7: Måling af funktionsdata ved kvalitetskontrol i forbindelse med leverancer Electroacoustics Hearing aids Part 7: Measurement
Læs mereIndustrial systems, installations and equipment and industrial products Labelling of cables and cores
Dansk standard DS/EN 62491 1. udgave 2009-01-20 Industrisystemer, installationer og udstyr samt industriprodukter Mærkning af kabler og ledninger Industrial systems, installations and equipment and industrial
Læs mereStyring af rumfartsprojekter. Generelle krav. Del 1: Politik og principper
Dansk Standard DS/EN 13290-1 1. udgave Godkendt:2000-04-13 Styring af rumfartsprojekter. Generelle krav. Del 1: Politik og principper Space project management - General requirements - Part 1: Policy and
Læs mereDansk standard DS/EN
Dansk standard DS/EN 61937-6 2. udgave 2006-09-12 Digital lyd - Grænseflade for ulineær PCM-kodet bitstrøm, der overholder IEC 60958 Del 6: Ulineære PCM-bitstrømme i henhold til MPEG-2-AAC- og MPEG-4-
Læs mereSteel castings Austenitic manganese steel castings
Dansk standard DS/EN 10349 1. udgave 2009-11-05 Stålstøbegods Austenitisk manganstålstøbegods Steel castings Austenitic manganese steel castings DS/EN 10349 København DS projekt: M220956 ICS: 77.140.80
Læs mereAkustik Støjreduktion Kabiner Laboratorie- og in situ-målinger
Dansk standard DS/EN ISO 11957 2. udgave 2009-09-22 Akustik Støjreduktion Kabiner Laboratorie- og in situ-målinger Acoustics Determination of sound insulation performance of cabins Laboratory and in situ
Læs mereHalvlederelementer Del 16-3: Integrerede kredse til mikrobølger Frekvensomformere
Dansk standard DS/EN 60747-16-3 1. udgave 2002-09-23 Halvlederelementer Del 16-3: Integrerede kredse til mikrobølger Frekvensomformere Semiconductor devices Part 16-3: Microwave integrated circuits Frequency
Læs mereNuclear power plants Control rooms Design
Dansk standard DS/EN 60964 1. udgave 2010-04-09 Kernekraftværker Kontrolrum Design Nuclear power plants Control rooms Design DS/EN 60964 København DS projekt: M245247 ICS: 27.120.20 Første del af denne
Læs mere