Porte til industri og andre erhverv samt garageporte Produktstandard Del 1: Produkter uden brandhæmmende egenskaber eller røgtæthedsegenskaber
|
|
- Benjamin Knudsen
- 5 år siden
- Visninger:
Transkript
1 Dansk standard DS/EN A1 2. udgave Porte til industri og andre erhverv samt garageporte Produktstandard Del 1: Produkter uden brandhæmmende egenskaber eller røgtæthedsegenskaber Industrial, commercial and garage doors and gates Product standard Part 1: Products without fire resistance or smoke control characteristics
2 DS/EN A1 København DS projekt: M ICS: Første del af denne publikations betegnelse er: DS/EN, hvilket betyder, at det er en europæisk standard, der har status som dansk standard. Denne publikations overensstemmelse er: IDT med: EN :2003+A1:2011. DS-publikationen er på engelsk. Denne publikation erstatter: DS/EN :2003. DS-publikationstyper Dansk Standard udgiver forskellige publikationstyper. Typen på denne publikation fremgår af forsiden. Der kan være tale om: Dansk standard standard, der er udarbejdet på nationalt niveau, eller som er baseret på et andet lands nationale standard, eller standard, der er udarbejdet på internationalt og/eller europæisk niveau, og som har fået status som dansk standard DS-information publikation, der er udarbejdet på nationalt niveau, og som ikke har opnået status som standard, eller publikation, der er udarbejdet på internationalt og/eller europæisk niveau, og som ikke har fået status som standard, fx en teknisk rapport, eller europæisk præstandard DS-håndbog samling af standarder, eventuelt suppleret med informativt materiale DS-hæfte publikation med informativt materiale Til disse publikationstyper kan endvidere udgives tillæg og rettelsesblade DS-publikationsform Publikationstyperne udgives i forskellig form som henholdsvis fuldtekstpublikation (publikationen er trykt i sin helhed) godkendelsesblad (publikationen leveres i kopi med et trykt DS-omslag) elektronisk (publikationen leveres på et elektronisk medie) DS-betegnelse Alle DS-publikationers betegnelse begynder med DS efterfulgt af et eller flere præfikser og et nr., fx DS 383, DS/EN 5414 osv. Hvis der efter nr. er angivet et A eller Cor, betyder det, enten at det er et tillæg eller et rettelsesblad til hovedstandarden, eller at det er indført i hovedstandarden. DS-betegnelse angives på forsiden. Overensstemmelse med anden publikation: Overensstemmelse kan enten være IDT, EQV, NEQ eller MOD IDT: Når publikationen er identisk med en given publikation. EQV: Når publikationen teknisk er i overensstemmelse med en given publikation, men præsentationen er ændret. NEQ: Når publikationen teknisk eller præsentationsmæssigt ikke er i overensstemmelse med en given standard, men udarbejdet på baggrund af denne. MOD: Når publikationen er modificeret i forhold til en given publikation.
3 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN :2003+A1 April 2011 ICS Supersedes EN :2003 English Version Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics Portes et portails industriels, commerciaux et de garage - Norme de produit - Partie 1: Produits sans caractéristiques coupe-feu, ni pare-fumée Tore - Produktnorm - Teil 1: Produkte ohne Feuer- und Rauchschutzeigenschaften This European Standard was approved by CEN on 12 June 2003 and includes Amendment 1 approved by CEN on 22 February CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN :2003+A1:2011: E
4 Contents Page Foreword... 4 Introduction Scope General Exclusions Specific applications Normative references Terms and definitions Requirements General Mechanical aspects General Force for manual operation Mechanical resistance Mechanical durability Geometry of glazing/glass components Protection against cutting Protection against tripping Safe openings Release of dangerous substances Power operation General Protection against crushing, shearing and drawing-in Operating forces Electrical safety Electromagnetic compatibility (EMC) Alternative requirements Upgrading of manually operated doors Additional requirements for specific performance characteristics General Water tightness Resistance to wind load Noise Thermal resistance Air permeability Durability of the performance characteristics Instructions for installation, operation and maintenance Marking and labelling Evaluation of conformity General Initial type test Test on site Production control Annex A (informative) Form for designation and classification of performances Annex B (normative) Procedure for the determination of values for thermal resistance B.1 Introduction B.2 Procedure
5 Annex C (informative) Safety factors to be considered in door design in respect of their resistance to wind load Annex ZA (informative) Relationship of this European Standard with the Construction Products Directive ZA.1 Clauses of this European Standard addressing the provisions of EU Construction Products Directive ZA.2 Procedures for the attestation of conformity of industrial, commercial and garage doors and gates ZA.2.1 General ZA.2.2 Procedure according to system ZA.3 CE-marking and labelling Annex ZB (informative)!relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC" Annex ZC (informative)!relationship between this European Standard and the Essential Requirements of EU Directive 2004/108/EC" Bibliography
6 Foreword This document (EN :2003+A1:2011) has been prepared by Technical Committee CEN/TC 33 "Doors, windows, shutters, building hardware and curtain walling", the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2011, and conflicting national standards shall be withdrawn at the latest by October Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1 approved by CEN on 22 February This document supersedes EN :2003. The start and finish of text introduced or altered by amendment is indicated in the text by tags!". This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annexes ZA, ZB and ZC, which are integral parts of this document.!annex ZB is revised taking into account the new Machinery Directive." Annexes A and C are informative. Annex B is normative. This document includes a Bibliography. This European Standard is part of a series of product standards for industrial, commercial and garage doors and gates with or without fire resistance or smoke control characteristics (see Bibliography). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. 4
7 Introduction With the aim of clarifying the intentions of this European Standard and avoiding doubts when reading it, the following assumptions were made when producing it: a) components without specific requirements are: designed in accordance with the usual engineering practice and calculation codes, including all failure modes; of sound mechanical and electrical construction; made of materials with adequate strength and of suitable quality; general electrical hazards are dealt with according to electrical safety standards such as EN b) components are kept in good repair and working order, so that the required characteristics remain during the economical working life despite wear; c) with the exception of the items listed below, a mechanical device is built according to good practice and the requirements of this European Standard: negotiations occur between the manufacturer and the purchaser concerning particular conditions for the use and places of use for the door related to health and safety; the place of use/installation to be adequately lit; the place of use/installation to allow safe use of the door. These assumptions do not restrict the need for adequate information for use in this European Standard. 5
8 1 Scope 1.1 General This European Standard specifies the safety and performance requirements for doors, gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises. This European Standard also covers commercial doors such as rolling shutters and rolling grilles used in retail premises which are mainly provided for the access of persons rather than vehicles or goods. These doors can include pass doors incorporated in the door leaf which are also covered by this European Standard. These devices can be manually or power operated. This European Standard does not cover operation in environments where the electromagnetic disturbances are outside the range of those specified in EN Exclusions This European Standard does not apply to the following which are intended for a different use: lock gates and dock gates; doors on lifts; doors on vehicles; armoured doors; doors mainly for the retention of animals; theatre textile curtains; horizontally moving manually operated pedestrian doors with a leaf size less than 6,25 m²; horizontally moving power operated doors less than 2,5 m wide and 6,25 m² area, designed principally for pedestrian use in accordance with pren ; revolving doors of any size; railway barriers; barriers used solely for vehicles. This European Standard does not cover the radio part of doors. If a radio operating device is used, the relevant ETSI standards should be applied in addition. This European Standard does not contain any specific requirements for fire resistance or smoke control characteristics which are covered in pren !deleted text" This European Standard does not contain any specific requirement for doors which are moving because of energy stored by dedicated means from human power such as manually tensioned springs. 6
9 This European Standard does not contain any specific requirements for doors on escape routes. The ability to open the door leaf safely and easily cannot normally be achieved by industrial, commercial and garage doors due to size, weight and/or mode of operation.!the noise emission of powered doors and gates is not considered to be a relevant hazard. Therefore this European Standard does not contain any specific requirements on noise in relation to the Machinery Directive." 1.3 Specific applications This European Standard should also apply to power operated doors which have been created by the addition of power operation to an installed manual door in respect of the relevant requirements. Annex ZA does not apply to this kind of door. It also identifies requirements and classes of performance for additional characteristics considered to be of importance to the trade. When a door is part of the load carrying structure of the building the requirements of this European Standard can apply on a voluntary basis in addition to the requirements for the load carrying structure, which are not dealt with in this European Standard. Annex ZA does not apply for this kind of doors. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 418, Safety of machinery Emergency stop equipment, functional aspects Principles for design EN 1037, Safety of machinery Prevention of unexpected start-up ENV , Eurocode 1 : Basis of design and actions on structures Part 2-4 : Actions on structures Wind actions EN 12424:2000, Industrial, commercial and garage doors and gates Resistance to wind load Classification EN 12425, Industrial, commercial and garage doors and gates Resistance to water penetration Classification EN 12426, Industrial, commercial and garage doors and gates Air permeability Classification EN 12427, Industrial, commercial and garage doors and gates Air permeability Test method EN 12428, Industrial, commercial and garage doors and gates Thermal transmittance Requirements for the calculation EN , Industrial, commercial and garage doors and gates Terminology Part 1 : Types of doors EN , Industrial, commercial and garage doors and gates Terminology Part 2 : Parts of doors EN 12444, Industrial, commercial and garage doors and gates Resistance to wind load Testing and calculation EN 12445:2000, Industrial, commercial and garage doors and gates Safety in use of power operated doors Test methods 7
10 EN 12453:2000, Industrial, commercial and garage doors and gates Safety in use of power operated doors Requirements EN 12489, Industrial, commercial and garage doors and gates Resistance to water penetration Test method EN 12604:2000, Industrial, commercial and garage doors and gates Mechanical aspects Requirements EN 12605:2000, Industrial, commercial and garage doors and gates Mechanical aspects Test methods EN 12635:2002, Industrial, commercial and garage doors and gates Installation and use EN 12978:2003, Industrial, commercial and garage doors and gates Safety devices for power operated doors and gates Requirements and test methods EN :1997, Safety of machinery Electrical equipment of machines Part 1 : General requirements (IEC :1997) EN ,!Electromagnetic compatibility (EMC) Part 6-2: Generic standards Immunity for industrial environments (IEC :2005)" EN ,!Electromagnetic compatibility (EMC) Part 6-3: Generic standards Emission standard for residential, commercial and light-industrial environments (IEC :2006)" EN ISO 140-3, Acoustics Measurement of sound insulation in buildings and of building elements Part 3 : Laboratory measurements of airborne sound insulation of building elements (ISO 140-3:1995) EN ISO 717-1, Acoustics Rating of sound insulation in buildings and of building elements Part 1 : Airborne sound insulation (ISO 717-1:1996) EN ISO , Thermal performance of windows and doors Determination of thermal transmittance by hot box method Part 1 : Complete windows and doors (ISO :2000) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN and EN and the following apply. 3.1 operating force of the door force exerted by the power operated door leaf when coming into contact with a person and/or an obstacle 3.2 vertically moving door any door where the main closing edge remains parallel to the ground or floor during its movement 3.3 horizontally moving door any door where the main closing edge remains perpendicular to the ground or floor during its movement 4 Requirements 4.1 General The choice of the door type and its specification needs to be made after taking into account where the door is to be installed and the operating requirements expected from it. Safety in use, ease of use and the amount and frequency of maintenance, its mode of operation, frequency of operation, degree of automation, provision of pass 8
Dansk standard DS/EN ISO udgave Campingtelte. Camping tents
Dansk standard DS/EN ISO 5912 2. udgave 2011-11-22 Campingtelte Camping tents DS/EN ISO 5912 København DS projekt: M245636 ICS: 97.200.30 Første del af denne publikations betegnelse er: DS/EN ISO, hvilket
Læs mereTekniske specifikationer for centrifugalpumper Klasse III
Dansk standard Tillæg DS/EN ISO 9908/A1 1. udgave 2011-06-08 Tekniske specifikationer for centrifugalpumper Klasse III Technical specifications for centrifugal pumps Class III Amendment 1 DS/EN ISO 9908/A1
Læs mereKosmetik Metoder til prøvning af solbeskyttelse In vivo-bestemmelse af UVA-beskyttelse
Dansk standard DS/EN ISO 24442 1. udgave 2012-02-01 Kosmetik Metoder til prøvning af solbeskyttelse In vivo-bestemmelse af UVA-beskyttelse Cosmetics Sun protection test methods In vivo determination of
Læs merePapir og karton Bestemmelse af tykkelse, densitet og massevolumen
Dansk standard DS/EN ISO 534 1. udgave 2012-01-04 Papir og karton Bestemmelse af tykkelse, densitet og massevolumen Paper and board Determination of thickness, density and specific volume DS/EN ISO 534
Læs merePulvermaling Del 7: Bestemmelse af massetab efter ophedning i ovn
Dansk standard DS/EN ISO 8130-7 1. udgave 2011-01-21 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 8130-7:2011 Pulvermaling Del 7: Bestemmelse af massetab efter ophedning
Læs mereMaintenance Documentation for maintenance
Dansk standard DS/EN 13460 3. udgave 2009-12-15 Vedligehold Dokumentation for vedligehold Maintenance Documentation for maintenance DS/EN 13460 København DS projekt: M245239 ICS: 01.110; 21.020 Første
Læs mereMajs Bestemmelse af vandindhold (i forarbejdet korn og i hele korn)
Dansk standard DS/EN ISO 6540 1. udgave 2010-06-23 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 6540:2010 Majs Bestemmelse af vandindhold (i forarbejdet korn og i hele
Læs merePlast Bestemmelse af termoplasts massesmelteindeks (MFR) og volumensmelteindeks (MVR) Del 1: Standardmetode
Dansk standard DS/EN ISO 1133-1 1. udgave 2012-01-25 Plast Bestemmelse af termoplasts massesmelteindeks (MFR) og volumensmelteindeks (MVR) Del 1: Standardmetode Plastics Determination of the melt mass-flow
Læs mereKrydderier og smagsstoffer Botanisk nomenklatur
Dansk standard DS/EN ISO 676 1. udgave 2009-07-23 Krydderier og smagsstoffer Botanisk nomenklatur Spices and condiments Botanical nomenclature DS/EN ISO 676 København DS projekt: M230052 ICS: 01.040.67;
Læs mereCentrale strømforsyningssystemer
Dansk Standard DS/EN 50171 1. udgave 2001-08-29 Centrale strømforsyningssystemer Central power supply systems DS/EN 50171 København DS projekt: 30769 ICS: 29.200 Deskriptorer: belysning til nødudgang,elektriske
Læs mereDansk standard DS/EN Loft ladders Requirements, marking and testing. 1. udgave
Dansk standard DS/EN 14975 1. udgave 2007-02-26 Loftstiger Krav, mærkning og prøvning Loft ladders Requirements, marking and testing DS/EN 14975 København DS projekt: 55746 ICS: 97.145 Første del af denne
Læs mereFritidsbåde Komfurer til flydende brændsel
Dansk standard DS/EN ISO 14895 1. udgave 2003-04-11 Fritidsbåde Komfurer til flydende brændsel Small craft Liquid-fuelled galley stoves DS/EN ISO 14895 København DS projekt: 47074 ICS: 47.080 Deskriptorer:
Læs mereVinduer og døre Vandtæthed Klassifikation
Dansk Standard DS/EN 12208 1. udgave Godkendt:2000-12-29 Vinduer og døre Vandtæthed Klassifikation Windows and doors Watertightness Classification DANSK STANDARD - Eftertryk uden tilladelse forbudt Kollegievej
Læs mereTeknisk tegning Flowdiagrammer til procesanlæg Generelle regler
Dansk Standard DS/EN ISO 10628 1. udgave Godkendelsesblad Godkendt:2001-04-06 Teknisk tegning Flowdiagrammer til procesanlæg Generelle regler Flow diagrams for process plants General rules DANSK STANDARD
Læs mereMaskinsikkerhed Elektrisk udstyr på maskiner Del 1: Generelle krav
Dansk standard Tillæg DS/EN 60204-1/A1 1. udgave 2009-03-13 Maskinsikkerhed Elektrisk udstyr på maskiner Del 1: Generelle krav Safety of machinery Electrical equipment of machines Part 1: General requirements
Læs mereBatchstyring Del 1: Modeller og terminologi
Dansk Standard DS/EN 61512-1 1. udgave 2001-08-29 Batchstyring Del 1: Modeller og terminologi Batch control Part 1: Models and terminology DS/EN 61512-1 København DS projekt: 26009 ICS: 25.040.40 Deskriptorer:
Læs merePalmeolie Bestemmelse af indeks for forringelse af blegningsevne (DOBI) samt bestemmelse af karotinindhold
Dansk standard DS/EN ISO 17932 2. udgave 2011-11-07 Palmeolie Bestemmelse af indeks for forringelse af blegningsevne (DOBI) samt bestemmelse af karotinindhold Palm oil Determination of the deterioration
Læs mereGeometriske produktspecifikationer (GPS) Længdemåleudstyr højdemålere Design og metrologiske karakteristika
Dansk standard DS/EN ISO 13225 1. udgave 2012-05-23 Geometriske produktspecifikationer (GPS) Længdemåleudstyr højdemålere Design og metrologiske karakteristika Geometrical product specifications (GPS)
Læs mereMiljøledelsessystemer Kravbeskrivelse med råd om anvendelse
Dansk standard DS/EN ISO 14001 2. udgave 2004-11-30 Miljøledelsessystemer Kravbeskrivelse med råd om anvendelse Environmental management systems Requirements with guidance for use DS/EN ISO 14001 København
Læs mereCold rolled narrow steel strip Tolerances on dimensions and shape
Dansk standard DS/EN 10140 3. udgave 2009-06-02 Koldvalset båndstål Tolerancer for dimensioner og form Cold rolled narrow steel strip Tolerances on dimensions and shape DS/EN 10140 København DS projekt:
Læs merePackaging Flexible plastic/metal laminate tubes Dimensions and tolerances of nozzle S 13
Dansk standard DS/EN 14979 1. udgave 2006-03-31 Emballage Fleksible laminattuber af plast/metal Dimensioner og tolerancer for dyse S 13 Packaging Flexible plastic/metal laminate tubes Dimensions and tolerances
Læs mereSlanger og rør af gummi og plast Måling af fleksibilitet og stivhed Del 2: Bøjeprøvning ved lavere temperaturer end rumtemperatur
Dansk standard DS/EN ISO 10619-2 1. udgave 2012-01-24 Slanger og rør af gummi og plast Måling af fleksibilitet og stivhed Del 2: Bøjeprøvning ved lavere temperaturer end rumtemperatur Rubber and plastics
Læs mereLampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler
Dansk standard Tillæg DS/EN 60061-1/A41 (elektronisk) 1. udgave 2010-06-24 Lampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler Lamp caps and holders together
Læs mereAkustik Deklarering og verificering af støj fra maskiner og udstyr
Dansk standard DS/EN ISO 4871 2. udgave 2009-09-09 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 4871:2009 Akustik Deklarering og verificering af støj fra maskiner og udstyr
Læs mereDansk standard DS/EN Risk management Risk assessment techniques. 1. udgave
Dansk standard DS/EN 31010 1. udgave 2010-05-20 Risikoledelse Teknikker til risikovurdering Risk management Risk assessment techniques DS/EN 31010 København DS projekt: M231261 ICS: 03.100.01 Første del
Læs mereAkustik Støjreduktion Kabiner Laboratorie- og in situ-målinger
Dansk standard DS/EN ISO 11957 2. udgave 2009-09-22 Akustik Støjreduktion Kabiner Laboratorie- og in situ-målinger Acoustics Determination of sound insulation performance of cabins Laboratory and in situ
Læs mereElektrostatik Del 4-1: Standardprøvningsmetoder. anvendelser Gulvbelægningers og monterede gulves elektrostatiske egenskaber
Dansk standard Tillæg DS/EN 61340-4-1:2004/A1:2015 1. udgave 2015-06-23 Elektrostatik Del 4-1: Standardprøvningsmetoder for specifikke anvendelser Gulvbelægningers og monterede gulves elektrostatiske egenskaber
Læs mereIkke-destruktiv prøvning Lækprøvning Kriterier for valg af metode og teknik
Dansk Standard DS/EN 1779 2. udgave 2001-10-26 Ikke-destruktiv prøvning Lækprøvning Kriterier for valg af metode og teknik Non-destructive testing Leak testing Criteria for method and technique selection
Læs merePrøvningsmetoder til hjælpekomponenter til murværk Del 4: Bestemmelse af lastkapacitet og lastnedbøjning i bjælkesko
Dansk standard DS/EN 846-4 + A1 2. udgave 2002-12-04 Prøvningsmetoder til hjælpekomponenter til murværk Del 4: Bestemmelse af lastkapacitet og lastnedbøjning i bjælkesko Methods of test for ancillary components
Læs mereKapslingsklasser (IP-kode)
Dansk Standard DS/EN 60529+A1 1. udgave 2002-04-05 Kapslingsklasser (IP-kode) Degrees of protection provided by enclosures (IP Code) DS/EN 60529+A1 København DS projekt: 47050 ICS: 29.020 Deskriptorer:
Læs mereMalinger og lakker Belysning og procedure for visuel vurdering af belægninger
Dansk standard DS/EN ISO 13076 1. udgave 2012-08-10 Malinger og lakker Belysning og procedure for visuel vurdering af belægninger Paints and varnishes Lighting and procedure for visual assessments of coatings
Læs mereEurocode 1: Last på bærende konstruktioner Del 1-3: Generelle laster Snelast
Dansk standard DS/EN 1991-1-3 2. udgave 2007-06-22 Eurocode 1: Last på bærende konstruktioner Del 1-3: Generelle laster Snelast Eurocode 1 Actions on structures Part 1-3: General actions - Snow loads DS/EN
Læs mereDansk standard DS/EN Weibull analysis. 1. udgave
Dansk standard DS/EN 61649 1. udgave 2008-12-10 Weilbull-analyse Weibull analysis DS/EN 61649 København DS projekt: M219606 ICS: 03.120.30 Første del af denne publikations betegnelse er: DS/EN, hvilket
Læs merePorte til industri og andre erhverv samt garageporte Modstandsevne overfor vindbelastning Klassifikation
Dansk Standard DS/EN 12424 1. udgave Godkendt:2000-11-07 Porte til industri og andre erhverv samt garageporte Modstandsevne overfor vindbelastning Klassifikation Industrial, commercial and garage doors
Læs mereTemperature Electromotive force (EMF) tables for pure-element thermocouple combinations
Dansk standard DS/EN 62460 1. udgave 2008-10-14 Temperatur Elektromotorisk kraft (EMF) Tabeller for kombinationer af rene termoelementer Temperature Electromotive force (EMF) tables for pure-element thermocouple
Læs mereKøkkengrej Grafiske symboler (piktogrammer)
Dansk standard DS/EN 14916 1. udgave 2005-11-14 Køkkengrej Grafiske symboler (piktogrammer) Domestic cookware Graphical symbols (pictograms) DS/EN 14916 København DS projekt: 55114 ICS: 01.080.20; 97.040.60
Læs mereMobil og bærbar DVB-T/H-radiotilslutning Del 2: Grænsefladeoverensstemmelsesprøvning
Dansk standard DS/EN 62002-2 1. udgave 2006-12-12 Mobil og bærbar DVB-T/H-radiotilslutning Del 2: Grænsefladeoverensstemmelsesprøvning Mobile and portable DVB-T/H radio access Part 2: Interface conformance
Læs mereWc-kummer og wc-møbler Tilslutningsdimensioner
Dansk standard DS/EN 33 3. udgave 2011-10-03 Wc-kummer og wc-møbler Tilslutningsdimensioner WC pans and WC suites Connecting dimensions DS/EN 33 København DS projekt: M235262 ICS: 91.140.70 Første del
Læs mereGrænseflade for digital lyd Del 1: Generelt
Dansk standard DS/EN 60958-1 3. udgave 2008-10-31 Grænseflade for digital lyd Del 1: Generelt Digital audio interface Part 1: General DS/EN 60958-1 København DS projekt: M222433 ICS: 33.160.30 Første del
Læs mereRotordynamiske pumper Godkendelsesprøvning af hydraulisk ydeevne Klasse 1, 2 og 3
Dansk standard DS/EN ISO 9906 2. udgave 2012-06-08 Rotordynamiske pumper Godkendelsesprøvning af hydraulisk ydeevne Klasse 1, 2 og 3 Rotodynamic pumps Hydraulic performance acceptance tests Grades 1, 2
Læs mereSteel castings Austenitic manganese steel castings
Dansk standard DS/EN 10349 1. udgave 2009-11-05 Stålstøbegods Austenitisk manganstålstøbegods Steel castings Austenitic manganese steel castings DS/EN 10349 København DS projekt: M220956 ICS: 77.140.80
Læs mereLegepladsredskaber og -underlag Del 11: Tredimensionelle klatrenet Supplerende specifikke sikkerhedskrav og prøvningsmetoder
Dansk standard DS/EN 1176-11 2. udgave 2009-04-22 Legepladsredskaber og -underlag Del 11: Tredimensionelle klatrenet Supplerende specifikke sikkerhedskrav og prøvningsmetoder Playground equipment and surfacing
Læs mereLampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler
Dansk standard Tillæg DS/EN 60061-1/A47 (elektronisk) 1. udgave 2012-04-23 Lampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler Lamp caps and holders together
Læs mereElmålingsudstyr (vekselstrøm) Særlige krav Del 23: Statiske målere til reaktiv energi (klasse 2 og 3)
Dansk standard DS/EN 62053-23 1. udgave 2003-04-11 Elmålingsudstyr (vekselstrøm) Særlige krav Del 23: Statiske målere til reaktiv energi (klasse 2 og 3) Electricity metering equipment (a.c.) Particular
Læs mereDansk standard DS/EN 13429. Packaging Reuse. 3. udgave 2006-10-12
Dansk standard DS/EN 13429 3. udgave 2006-10-12 Emballage Genbrug Packaging Reuse DS/EN 13429 København DS projekt: M215981 ICS: 13.030.50; 55.020 Første del af denne publikations betegnelse er: DS/EN,
Læs mereBordtennis Del 2: Netstolper Krav og prøvningsmetoder
Dansk standard DS/EN 14468-2:2015 2. udgave 2015-04-29 Bordtennis Del 2: Netstolper Krav og prøvningsmetoder Table tennis Part 2: Posts for net assemblies Requirements and test methods DS/EN 14468-2:2015
Læs mereSkovbrugs- og havebrugsmaskiner Vibrationsprøvning af bærbare håndholdte maskiner med forbrændingsmotor Vibrationer ved håndtagene
Dansk standard DS/EN ISO 22867 3. udgave 2012-01-25 Skovbrugs- og havebrugsmaskiner Vibrationsprøvning af bærbare håndholdte maskiner med forbrændingsmotor Vibrationer ved håndtagene Forestry and gardening
Læs mereMatematiske udtryk for pålidelighed, tilgængelighed og vedligehold samt for understøttelse af vedligehold
Dansk Standard DS/EN 61703 1. udgave 2002-05-01 Matematiske udtryk for pålidelighed, tilgængelighed og vedligehold samt for understøttelse af vedligehold Mathematical expressions for reliability,availability,
Læs mereDansk Standard DS/EN udgave. Flymateriel
Dansk Standard DS/EN 3961 1. udgave Godkendt:2001-07-11 Flymateriel Aerospace series Gold base alloy AU-B40001 Filler metal for brazing-rolled foil DANSK STANDARD - Eftertryk uden tilladelse forbudt Kollegievej
Læs mereControl technology Rules for the designation of measuring instruments
Dansk standard DS/EN 62419 1. udgave 2009-03-10 Styringsteknologi Regler for benævnelse af måleinstrumenter Control technology Rules for the designation of measuring instruments DS/EN 62419 København DS
Læs mereFugtindhold af et stykke savet træ Del 2: Vurdering ved elektrisk modstandsmetode
Dansk Standard DS/EN 13183-2 1. udgave 2002-04-30 Fugtindhold af et stykke savet træ Del 2: Vurdering ved elektrisk modstandsmetode Moisture content of a piece of sawn timber Part 2: Estimation by electrical
Læs mereSolcelleanlæg Termer, definitioner og symboler
DS-information DS/CLC/TS 61836 1. udgave 2009-06-26 Solcelleanlæg Termer, definitioner og symboler Solar photovoltaic energy systems Terms, definitions and symbols DS/CLC/TS 61836 København DS projekt:
Læs mereKontormøbler Kontorstole Del 1: Mål Bestemmelse af dimensioner
Dansk Standard DS/EN 1335-1 2. udgave Godkendt: 2001-02-21 Kontormøbler Kontorstole Del 1: Mål Bestemmelse af dimensioner Office furniture Office work chair Part 1: Dimensions Determination of dimensions
Læs mereUdstyr til tilslutning af belysningsarmaturer til husholdningsbrug o.l. Del 2: Normblade for DCL
Dansk standard DS/EN 61995-2 1. udgave 2009-06-10 Udstyr til tilslutning af belysningsarmaturer til husholdningsbrug o.l. Del 2: Normblade for DCL Devices for the connection of luminaires for household
Læs mereFacility Management Del 2: Vejledning i udarbejdelse af Facility Management-aftaler
Dansk standard DS/EN 15221-2 2. udgave 2008-06-30 Facility Management Del 2: Vejledning i udarbejdelse af Facility Management-aftaler Facility Management Part 2: Guidance on how to prepare Facility Management
Læs mereTrækonstruktioner Bestemmelse af dyblers brudmoment
Dansk standard DS/EN 409 2. udgave 2009-06-24 Trækonstruktioner Bestemmelse af dyblers brudmoment Timber structures Test methods Determination of the yield moment of dowel type fasteners DS/EN 409 København
Læs mereStyring af rumfartsprojekter. Generelle krav. Del 1: Politik og principper
Dansk Standard DS/EN 13290-1 1. udgave Godkendt:2000-04-13 Styring af rumfartsprojekter. Generelle krav. Del 1: Politik og principper Space project management - General requirements - Part 1: Policy and
Læs mereSpecifikation og kvalificering af svejseprocedurer for metalliske materialer Kvalificering ved godkendelse af en standardsvejseprocedure
Dansk standard DS/EN ISO 15612 2. udgave 2005-12-22 Specifikation og kvalificering af svejseprocedurer for metalliske materialer Kvalificering ved godkendelse af en standardsvejseprocedure Specification
Læs mereGasfyrede tørretumblere af type B med en nominel belastning, der ikke overstiger 20 kw Del 2: Rationel energiudnyttelse
Dansk Standard DS/EN 12752-2 2. udgave 2001-11-09 Gasfyrede tørretumblere af type B med en nominel belastning, der ikke overstiger 20 kw Del 2: Rationel energiudnyttelse Gas-fired tumble dryers of type
Læs mereGymnastikudstyr Heste og bukke Funktions- og sikkerhedskrav, prøvningsmetoder
Dansk standard DS/EN 12196 2. udgave 2003-03-24 Gymnastikudstyr Heste og bukke Funktions- og sikkerhedskrav, prøvningsmetoder Gymnastic equipment Horses and bucks Functional and safety requirements, test
Læs mereTransportbånd Bestemmelse af trækstyrken for mekaniske forbindelser Statisk prøvningsmetode
Dansk Standard DS/EN ISO 1120 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION Transportbånd Bestemmelse af trækstyrken for mekaniske forbindelser Statisk prøvningsmetode Conveyor belts
Læs mereIntegration af virksomhedens styringssystem Del 1: Modeller og terminologi
Dansk standard DS/EN 62264-1 1. udgave 2008-02-01 Integration af virksomhedens styringssystem Del 1: Modeller og terminologi Enterprise-control system integration DS/EN 62264-1 København DS projekt: M222179
Læs mereMultimedia quality Method of assessment of synchronization of audio and video
Dansk standard DS/EN 62503 1. udgave 2008-10-31 Multimediekvalitet Metode til fastsættelse af synkronisering mellem lyd og billede Multimedia quality Method of assessment of synchronization of audio and
Læs mereLedelse af pålidelighedsaktiviteter Del 3-11: Anvendelsesvejledning Pålidelighedscentreret vedligehold (RCM)
Dansk standard DS/EN 60300-3-11 1. udgave 2009-12-10 Ledelse af pålidelighedsaktiviteter Del 3-11: Anvendelsesvejledning Pålidelighedscentreret vedligehold (RCM) Dependability management Part 3-11: Application
Læs mereJernbaneanvendelser Datakommunikation, signallering og databehandling Del 1: Sikkerhedsrelateret kommunikation i lukkede transmissionssystemer
Dansk Standard DS/EN 50159-1 1. udgave 2001-10-31 Jernbaneanvendelser Datakommunikation, signallering og databehandling Del 1: Sikkerhedsrelateret kommunikation i lukkede transmissionssystemer Railway
Læs mereHalvlederelementer Mekaniske og klimatiske prøvningsmetoder Del 33: Accelereret fugtbestandighed Objektiv autoklav
Dansk standard DS/EN 60749-33 1. udgave 2004-04-29 Halvlederelementer Mekaniske og klimatiske prøvningsmetoder Del 33: Accelereret fugtbestandighed Objektiv autoklav Semiconductor devices Mechanical and
Læs mereInstrumenttransformere Del 8: Elektroniske strømtransformere
Dansk standard DS/EN 60044-8 1. udgave 2002-10-24 Instrumenttransformere Del 8: Elektroniske strømtransformere Instrument transformers - Part 8: Electronic current transformers DS/EN 60044-8 København
Læs mereFaste modstande til brug i elektronisk udstyr Del 1: Generisk specifikation
Dansk standard Tillæg DS/EN 60115-1:2011/ A11:2015 1. udgave 2015-05-18 Faste modstande til brug i elektronisk udstyr Del 1: Generisk specifikation Fixed resistors for use in electronic equipment Part
Læs mereHjælpemidler til personer med funktionsevnenedsættelse Klassifikation og terminologi
Dansk standard DS/EN ISO 9999 6. udgave 2007-12-19 Hjælpemidler til personer med funktionsevnenedsættelse Klassifikation og terminologi Assistive products for persons with disability Classification and
Læs mereKlassifikation og betegnelse af dokumenter for fabriksanlæg, anlæg og udstyr Del 1: Regler og klassifikationstabeller
Dansk standard DS/EN 61355-1 2. udgave 2008-07-04 Klassifikation og betegnelse af dokumenter for fabriksanlæg, anlæg og udstyr Del 1: Regler og klassifikationstabeller Classification and designation of
Læs mereStearinlys Produktsikkerhedsmærkning
Dansk standard DS/EN 15494 1. udgave 2007-11-12 Stearinlys Produktsikkerhedsmærkning Candles Product safety labels DS/EN 15494 København DS projekt: M212730 ICS: 13.120; 97.180 Første del af denne publikations
Læs mereTilsatsmaterialer til svejsning Pulverfyldte elektroder til metallysbuesvejsning
Dansk standard DS/EN ISO 12153 1. udgave 2012-06-08 Tilsatsmaterialer til svejsning Pulverfyldte elektroder til metallysbuesvejsning med eller uden beskyttelsesgas af nikkel og nikkellegeringer Klassifikation
Læs mereVentilation i bygninger Symboler, terminologi og grafiske symboler
Dansk standard DS/EN 12792 1. udgave 2003-12-17 Ventilation i bygninger Symboler, terminologi og grafiske symboler Ventilation for buildings Symbols, terminology and graphical symbols DS/EN 12792 København
Læs mereGrænseflade for digital lyd Del 1: Generelt
Dansk standard Tillæg DS/EN 60958-1/A1 1. udgave 2014-09-02 Grænseflade for digital lyd Del 1: Generelt Digital audio interface Part 1: General DS/EN 60958-1/A1 København DS projekt: M277911 ICS: 33.160.30
Læs mereForkoblingsenheder for lysstofrør Krav til ydeevne
Dansk standard DS/EN 60921 2. udgave 2005-02-10 Forkoblingsenheder for lysstofrør Krav til ydeevne Ballasts for tubular fluorescent lamps Performance requirements DS/EN 60921 København DS projekt: 49567
Læs mereDansk standard DS/EN
Dansk standard DS/EN 60534-2-5 1. udgave 2003-12-22 Reguleringsventiler til industrielle processer Del 2-5: Gennemstrømningskapacitet Dimensionsligninger for væskestrømme gennem flertrinsreguleringsventiler
Læs mereJalousier og skodder Holdbarhed ved gentaget brug (mekanisk varighed) Prøvningsmetoder
Dansk standard DS/EN 14201 1. udgave 2004-05-25 Jalousier og skodder Holdbarhed ved gentaget brug (mekanisk varighed) Prøvningsmetoder Blinds and shutters Resistance to repeated operations (mechanical
Læs mereFyldstoffer til malinger Specifikationer og prøvningsmetoder Del 15: Keramisk siliciumdioxid
Dansk Standard DS/EN ISO 3262-15 1. udgave Godkendt:2000-07-10 Fyldstoffer til malinger Specifikationer og prøvningsmetoder Del 15: Keramisk siliciumdioxid Extenders for paints - Specifications and methods
Læs mereGødning Ekstraktion af vandopløseligt calcium, magnesium, natrium og svovl i form af sulfat
Dansk standard DS/EN 15961 1. udgave 2012-01-06 Gødning Ekstraktion af vandopløseligt calcium, magnesium, natrium og svovl i form af sulfat Fertilizers Extraction of water-soluble calcium, magnesium, sodium
Læs mereGrænseflade for digital lysstyring (DALI) Del 208: Særlige krav til kontroludstyr Omskifterfunktion (udstyrstype 7)
Dansk standard DS/EN 62386-208 1. udgave 2009-09-22 Grænseflade for digital lysstyring (DALI) Del 208: Særlige krav til kontroludstyr Omskifterfunktion (udstyrstype 7) Digital addressable lighting Interface
Læs mereAudioudstyr og audiovisuelt udstyr Digitale audiodele Grundlæggende metoder til måling af audiokarakteristika Del 3: Professionel brug
Dansk standard DS/EN 61606-3 1. udgave 2008-12-12 Audioudstyr og audiovisuelt udstyr Digitale audiodele Grundlæggende metoder til måling af audiokarakteristika Del 3: Professionel brug Audio and audiovisual
Læs mereElproducerende vindmøller Del 25-3: Kommunikationssystemer til overvågning og styring af vindmølleparker Modeller for informationsudveksling
Dansk standard DS/EN 61400-25-3 1. udgave 2007-04-27 Elproducerende vindmøller Del 25-3: Kommunikationssystemer til overvågning og styring af vindmølleparker Modeller for informationsudveksling Wind turbines
Læs mereKosmetik Mikrobiologi Vurdering af et kosmetikprodukts antimikrobielle beskyttelse
Dansk standard DS/EN ISO 11930 1. udgave 2012-04-25 Kosmetik Mikrobiologi Vurdering af et kosmetikprodukts antimikrobielle beskyttelse Cosmetics Microbiology Evaluation of the antimicrobial protection
Læs mereMøbler til udendørs brug Siddemøbler og borde til camping, privat og offentlig brug Del 1: Generelle sikkerhedskrav
Dansk standard DS/EN 581-1 2. udgave 2006-04-19 Møbler til udendørs brug Siddemøbler og borde til camping, privat og offentlig brug Del 1: Generelle sikkerhedskrav Outdoor furniture Seating and tables
Læs mereLavspændingssikringer Del 1: Generelle krav
Dansk standard DS/EN 60269-1 3. udgave 2007-06-19 Lavspændingssikringer Del 1: Generelle krav Low-voltage fuses Part 1: General requirements DS/EN 60269-1 København DS projekt: M205966 ICS: 29.120.50 Første
Læs mereTandpleje Manuelle tandbørster Generelle krav og prøvningsmetoder
Dansk standard DS/EN ISO 20126 2. udgave 2012-04-18 Tandpleje Manuelle tandbørster Generelle krav og prøvningsmetoder Dentistry Manual toothbrushes General requirements and test methods DS/EN ISO 20126
Læs mereLiming materials Determination of the breakdown of granulated calcium and calcium/magnesium carbonates under the influence of water
Dansk standard DS/EN 15704 1. udgave 2009-01-23 Jordbrugskalk Bestemmelse af nedbrydning af granuleret calcium- og calcium/magnesiumcarbonater påvirket af vand Liming materials Determination of the breakdown
Læs mereGødning Betegnelser og specifikationer
DS-information DS/CEN/CR 12949 1. udgave 2003-12-19 Gødning Betegnelser og specifikationer Fertilizers Denominations and specifications DS/CEN/CR 12949 København DS projekt: 34104 ICS: 65.080 Deskriptorer:
Læs mereMaskinsikkerhed Permanente adgangsveje til maskinanlæg Del 4: Faste stiger
Dansk standard Tillæg DS/EN ISO 14122-4/A1 1. udgave 2010-10-19 Maskinsikkerhed Permanente adgangsveje til maskinanlæg Del 4: Faste stiger Safety of machinery Permanent means of access to machinery Part
Læs mereSvejsekoordination Opgaver og ansvarsforhold
Dansk standard DS/EN ISO 14731 1. udgave 2006-11-06 Svejsekoordination Opgaver og ansvarsforhold Welding coordination Tasks and responsibilities DS/EN ISO 14731:2006 København DS projekt: 55660 ICS: 25.160.01
Læs mereVarmvalsede stålplader med en tykkelse på 3 mm eller mere Dimensions- og formtolerancer
Dansk standard DS/EN 10029 2. udgave 2010-12-14 Varmvalsede stålplader med en tykkelse på 3 mm eller mere Dimensions- og formtolerancer Hot-rolled steel plates 3 mm thick or above Tolerances on dimensions
Læs mereEurocode 7: Geoteknik Del 1: Generelle regler
Dansk standard Tillæg DS/EN 1997-1/A1 1. udgave 2014-02-03 Eurocode 7: Geoteknik Del 1: Generelle regler Eurocode 7: Geotechnical design Part 1: General rules DS/EN 1997-1/A1 København DS projekt: M267839
Læs mereVinduer og døre Mekanisk holdbarhed Krav og klassifikation
Dansk standard DS/EN 12400 1. udgave 2003-02-04 Vinduer og døre Mekanisk holdbarhed Krav og klassifikation Windows and pedestrian doors Mechanical durability Requirements and classification DS/EN 12400
Læs mereFødevarer Bestemmelse af C-vitamin ved hjælp af HPLC
Dansk standard DS/EN 14130 1. udgave 2003-07-15 Fødevarer Bestemmelse af C-vitamin ved hjælp af HPLC Foodstuffs Determination of vitamin C by HPLC DS/EN 14130 København DS projekt: 46748 ICS: 67.050 Deskriptorer:
Læs merePackaging Requirements for the use of European Standards in the field of packaging and packaging waste
Dansk standard DS/EN 13427 3. udgave 2006-10-12 Emballage Krav til anvendelsen af europæiske standarder for emballage og emballageaffald Packaging Requirements for the use of European Standards in the
Læs mereBæredygtighed inden for byggeri og anlæg Miljøvaredeklarationer (EPD) Kommunikationsformat: business-tobusiness
Dansk standard DS/EN 15942 1. udgave 2011-10-28 Bæredygtighed inden for byggeri og anlæg Miljøvaredeklarationer (EPD) Kommunikationsformat: business-tobusiness (B2B) Sustainability of construction works
Læs mereBogstavsymboler til brug i elektroteknologi Del 2: Telekommunikation og elektronik
Dansk standard DS/EN 60027-2 1. udgave 2007-05-15 Bogstavsymboler til brug i elektroteknologi Del 2: Telekommunikation og elektronik Letter symbols to be used in electrical technology Part 2: Telecommunications
Læs mereLoftstiger Krav, mærkning og prøvning
Dansk standard DS/EN 14975 + A1 2. udgave 2010-08-26 Loftstiger Krav, mærkning og prøvning Loft ladders Requirements, marking and testing DS/EN 14975 + A1 København DS projekt: M249560 ICS: 97.145 Første
Læs mere