VACUUM PRESSURE REGULATOR

Transkript

1 VUUM PRESSURE REGULTOR DESRIPTION PRESSURE RNGE ONNETION SERIES PGE max. 22 l/min miniature mbar 1 8 NPT V max. 22 l/min miniature mbar and flange V max. 0 l/min precise -1 +0,.4 / 10 bar G¼.03 max. 330 l/min precise mbar G¼ - G½ V10.04 max. 800 l/min precise / 10 bar G½ and G¾ R adjustment valve / 0 bar G G1 V04/V05.06 thread.01

2 MINITURE VUUM PRESSURE REGULTOR, MDE OF PLSTI V800 / V900 Miniature precision regulator with diaphragm and high outlet pressure constancy, small dimensions, low weight. 20-turn hysteresis-free adjustment range allows sensitive pressure setting. Supply pressure max mbar ccuracy at pressure variation of 10 mbar: < 4 mbar pressure deviation at pressure removal/reapplication: < mbar pressure deviation setting accuracy: < 2.5 mbar ir consumption 0.3 l/min at mbar pressure djustment by plastic knob, adjusting screw or preset Gauge port not available Temperature range 4 to 66 / 39 F to 151 F Material ody: polysulfone Inner valve: stainless steel and acetal Elastomer: NR/una-N or flangeable 0-350/-850 mbar Dimensions Pressure Flow Order Price adjustment rate range number D mm mm mm by l/min mbar regulator pressure max mbar, with constant bleed V900-W adjusting knob V900-10WK 81, V900-30WK 81, adjusting screw V900-10WOS 5, V900-30WOS 5, preset 22 indicate on order V ,00 reglator with flange pressure max mbar, with constant bleed V900-M adjusting knob V900-10MWK 89, V900-30MWK 89, adjusting screw V900-10MWOS 84, V900-30MWOS 84, preset 22 indicate on order V901-..M 94,00 V WK V WK Special options, add the appropriate letter or number 1 8 NPT connection thread, width 40 mm V ,00 mounting bracket made of steel W ,00 V WOS Ø5, V V900-..WK V900-..WOS V W P M3x 1, ,9 NR O-Ring suppplied with unit OUTPUT INTPUT tank regulator pump V V M V M V M connection V900-10WK.02

3 PREISION VUUM PRESSURE REGULTOR 0 L/MIN Supply pressure ccuracy djustment ir consumption Diaphragm regulator ensuring high precision in both and positive pressure range. max. 1 bar response sensitivity: < 2 mbar by handwheel with locknut max. 2.8 l/min in positive pressure range Flow rate 0 l/min* 1 in range, 900 l/min* 2 in positive pressure range Gauge port G¼ on both sides of the body, screw plugs supplied Temperature range -40 to 90 / -40 F to 194 F Material ody aluminium die-cast Inner valve: stainless steel and brass Elastomer: NR/una-N G 1 / / 10 bar Dimensions Kv Flow onnection Order Price D value rate thread range number D mm mm mm mm m 3 /h m 3 /h* 1 l/min* 1 G bar pressure regulator pressure max. 1 bar, with constant bleed ,8 4 0 G¼ , , , , D 40,00 Special options, add the appropriate letter NPT connection thread -0.. N +10,00 tamper-proof cap made of aluminium, adjustment by screwdriver, total height 189 mm -0.. T +3,00 pressure gauge Ø 63 mm, -1 0 bar, G¼ M ,50 mounting bracket made of steel W ,50 aspirator borehole pump gauge G¼ Ø9 58 or compressed air consumer D cross-section connection for downstream regulation bypass regulation W downstream regulation to close tank pump tank Note pump strainer is provided on the atmospheric or pressure side, but an additional filter is recommended. 1 ypass regulation Upstream installation is preferred when rapid exhaust of a tank or system is required. That way the pump acts directly upon the tank and is not being throttled by the regulator. 2 * 1 for compressed air at bar pressure and 0 bar outlet pressure * 2 for compressed air at bar pressure and 1.4 bar outlet pressure Gauges: see chapter for measuring devices Downstream regulation The regulator is located between the pump and the tank. The pump is energy-saving and it is easy to fill the tank to its optimal level with

4 PREISION VUUM PRESSURE REGULTOR 330 L/MIN V10 ccuracy djustment Gauge port Temperature range High precision diaphragm regulator with high flow capacity. balanced valve minimizes the effects of variation. response sensitivity: < 2 mbar by handwheel with locknut G¼ on both sides of the body, screw plugs supplied 0 to 90 / 32 F to 194 F for appropriately conditioned compressed air down to -40 / -40 F Material ody: aluminium die-cast Elastomer: NR/una-N, optionally FKM Inner valve: stainless steel, brass, aluminium and steel G 1 4 up to G / -500 / mbar Dimensions Kv- Flow onnection Pressure Order Price value rate thread range number D mm mm mm (m 3 /h) m 3 /h* 1 l/min* 1 G mbar Precision regulator pressure max mbar, without constant bleed V G V , V , V , G V , V , V , G V , V , V ,00 V10 Special options, add the appropriate letter NPT connection thread V N +10,00 Verstellsicherung made of aluminium, adjustment by screwdriver, total height 160 mm V T +3,00 FKM-Elastomere V V +115,00 pressure gauge Ø 63 mm, 0 bar down to -1bar, G¼ M ,50 mounting bracket made of steel W ,00 regulated cross-section 58 Ø W exhaust gauge G1/4 exhaust tank regulated pump gauge port V10 Gauges: see chapter for measuring devices.04 gauge port with tamper proof cap connection diagram V10-02

5 PREISION VUUM PRESSURE REGULTOR 800 L/MIN R251 Supply pressure ccuracy djustment ir consumption Diaphragm regulator ensuring high precision in both and positive pressure range. max. 1 bar response sensitivity: < 2.5 mbar by handwheel with locknut without constant bleed Flow rate 800 l/min* 1 in range, 4200 l/min* 2 in positive pressure range Gauge port G¼ on both sides of the body, screw plugs supplied Temperature range -40 to 90 / -40 F to 194 F Material ody: aluminium die-cast Inner valve: stainless steel and brass Elastomer: NR/una-N G1/2 and G3/4 0./10 bar Dimensions Kv Flow onnection Order Price D value rate thread range number D mm mm mm mm m 3 /h m 3 /h* 1 l/min* 1 G bar pressure regulator pressure max. 1 bar, without constant bleed R , G½ R , R , R251-04D 1.85, , G¾ R , R , R251-06D 1.85,00 Special options, add the appropriate letter NPT connection thread R N +10,00 tamper-proof cap made of aluminium, adjustment by screwdriver, total height 240 mm R T +3,00 FKM elastomer R V +12,00 R251 pressure gauge Ø 63 mm, -1 0 bar, G¼ M ,50 mounting bracket made of steel W ,00 handwheel spring signal diaphragm reliev valve control diaphragm connecting tube diaphragm assembly outlet aspirator tube D gauge G¼ Ø5.5 Ø5.5 2 inlet valve motor diaphragm cross section connection for downstream regulation 20 bypass regulation 1 R251 W downstream regulation to close tank pump tank Note pump strainer is provided on the atmospheric or pressure side, but 1 an additional filter is recommended. ypass regulation Upstream installation is preferred when rapid 22 exhaust of a tank or system is required. That way the pump acts directly upon the tank and is not being throttled by the regulator. * 1 for compressed air at bar pressure and 0 bar outlet pressure * 2 for compressed air at bar pressure and 1.4 bar outlet pressure Gauges: see chapter for measuring devices Downstream regulation The regulator is located between the pump and the tank. The pump is energy-saving and it is easy to fill the tank to its optimal level with. R

6 VUUM DJUSTMENT VLVES V04 / V05 pplication djustment When these valves reach a certain precalibrated degree, they introduce atmospheric air into the circuit to prevent the increase of the set value and keep it constant. They are used as safety valves on non-commissioned tanks or containers at high level and on cup lifting systems. V04: by rotating the knurled bush in both directions V05: by knurled head screw or adjusting knob on spindle with fine thread Temperature range -20 to 80 / -4 F to 16 F Material ody: nickel-plated brass Inner valve: spring steel and brass Elastomer: NR/una-N G 1 8 up to G bar Dimensions Flow onnection - Order Price SW rate thread range number D mm mm mm m 3 /h l/min G bar adjustment valve regulator with external leakage V G V , G½ V , G3/ V , G V ,00 V04-01 V04-04 adjustment valve, precise regulator with external leakage V G¼ V , G V ,00 V04-06 V04-08 /F12 /F 24/30/35 V04-01 V04-04 / -06 / -08 V05-02 V05-08 tank /F25 /F32 V05-02 V05-08 V