Datamate L-Tek Specification. Pin Numbering DATAMATE L-TEK. Materials. Mechanical. Electrical. Environmental. 5 Female. Female. Male.

Transkript

1 Datamate L-Tek Specification Materials Mouldings: Female contacts: Male contacts: Finish: Electrical Glass-filled thermoplastic UL94V-0 rass shell, with eryllium Copper inner contact Copper alloy See individual pages Current Individual contacts in isolation: 3.3A (at 25 C) 2.6A (at 85 C) All contacts simultaneously: 3.0A (at 25 C) 2.2A (at 85 C) Working voltage At sea level 1013 mbar: Voltage proof At sea level 1013 mbar: Contact resistance Initial: After conditioning: Insulation resistance Initial: After conditioning: 800V DC or ACrms 1,200V DC or ACrms 20mΩ 25mΩ 1,000MΩ min 100MΩ min Mechanical Durability Standard L-Tek: Trio-Tek: Insertion force (): 2.8N Withdrawal force (min): 0.2N Signal crimp accommodation: Environmental Environmental classification: Operational temperature: *Vibration sensitivity: *ump severity: *Shock severity: *Acceleration severity: 500 operations 400 operations 22 AWG to 32 AWG S 3G 210 Type A, MIL-W /125/56 days at 95% RH -55 C to +125 C 10Hz to 2000Hz, 0.75mm, 98m/s 2 (10G), duration 6h 390m/s 2 (40G), 4000 ±10 bumps 981m/s 2 (100G) for 6ms 490m/s 2 (50G) * Tested with latched connectors. Pin Numbering SINGLE ROW DOULE ROW Female 10 1 Female Male Male

2 Datamate L-Tek Mating Profiles FEMALE VERTICAL PC TAIL VERTICAL PC TAIL VERTICAL SMT CRIMP CRIMP (TRIO-TEK) SIL DIL DIL SIL DIL SIL DIL HORIZONTAL PC TAIL MALE VERTICAL SMT HORIZONTAL SMT CRIMP

3 Female Vertical PC Polarised mouldings. Dummy contacts are available for additional polarisation, use order code M SINGLE ROW A (Total no. of contacts - 1) x 2 A min 1.90 Holes required for use with latched male connectors Ø Recommended PC oard Pattern DOULE ROW A A min 1.90 Total no. of contacts - 2 Holes required for use with latched male connectors 4.00 Ø Recommended PC oard Pattern 840 Single Row (3mm tail) 850 Double Row (3mm tail) 790 Single Row (4.5mm tail) 770 Double Row (4.5mm tail) M80 - XXX XX XX 42 Gold + Tin 45 Gold 02 to 07, 17, 22 Single Row 04, 06, 08, 10, 12, 14, 16, 18, 20, 26, 34, 44 Double Row 151

4 Female Vertical Surface Mount Optional pick and place cap. Contact for tape & reel options. Gull wing SMT tails simplify inspection process. DOULE ROW A 2.50 min Holes required for use with latched male connectors Recommended PC oard Pattern A Total no. of contacts , 06, 08, 10, 12, 14, 16, 18, 20, 26, 34, 44 M XX XX P PICK AND PLACE CAP LANK No cap P Pick and place cap 42 Gold + Tin 45 Gold 152

5 Female Crimp Kit Part numbers are for a complete kit of a housing and the applicable number of contacts. Contacts are rear insertable. Spare contacts are available see the following page. SINGLE ROW A DOULE ROW A (Total no. of contacts - 1) x 2 Total no. of contacts - 2 A 3.40 A TOOLS WIRE STRIPPING DETAILS Recommended Crimp Tool M22520/2-01 Positioner T5747 Contact Insertion/Removal Tool Z Spare and pre-cabled contacts shown on following pages. Instruction sheets available at /instructions. Ø1.10 for Small & Large ore Ø0.75 for Extra Small ore M80 - XXX XX XX 798 Single Row, Extra Small ore (28-32 AWG) 898 Single Row, Small ore (24-28 AWG) 899 Single Row, Large ore (22 AWG) 788 Double Row, Extra Small ore (28-32 AWG) 888 Double Row, Small ore (24-28 AWG) 889 Double Row, Large ore (22 AWG) 01 Gold + Tin 05 Gold 02 to 07, 17 Single Row 04, 06, 08, 10, 12, 14, 16, 18, 20, 26, 34 Double Row 153

6 Spare Female Crimp Contacts arrel Crimp Contacts are supplied with the connectors - see previous page. Use the order code for extra spare crimps. CRIMP CONTACTS WIRE STRIPPING DETAILS Large ore (22 AWG) 7.45 Ø1.10 for Small & Large ore Ø0.75 for Extra Small ore Small ore (24 to 28 AWG) TOOLS Extra Small ore (28 to 32 AWG) Ident Groove Recommended Crimp Tool M22520/2-01 Positioner T5747 Contact Insertion/Removal Tool Z Pre-cabled contacts shown on following page. Instruction sheets available at /instructions. Ident Grooves M80-0XX 00 XX 011 Large ore (22 AWG) 013 Small ore (24-28 AWG) 019 Extra Small ore (28-32 AWG) 01 Gold + Tin 05 Gold 154

7 Female Crimp Contacts Pre-Crimped Wires Female crimp contacts pre-assembled with a choice of S 3G 210 Type A cable at selected lengths. PTFE-insulated, multi-strand silver-plated copper conductor equipment wire. Ideal for prototype and pre-production applications. For non-standard cable lengths, please visit harwin.com/cable-assemblies and fill in your requirements. FEMALE SINGLE ENDED FEMALE - FEMALE Cable Length Cable Length TOOLS Contact Insertion/Removal Tool Z Full crimp connector kits and spare crimp contacts shown on previous pages. Instruction sheets available at /instructions. M80-9XX CALE COLOUR 99 Red SINGLE ENDED FEMALE-FEMALE AWG Cable, 150mm length AWG Cable, 150mm length AWG Cable, 150mm length AWG Cable, 150mm length AWG Cable, 300mm length AWG Cable, 300mm length AWG Cable, 300mm length AWG Cable, 300mm length 155

8 Female Accessories Crimp Hood is supplied as a kit of parts, including body, lid, cable clamp and 4 screws. For use with double row female crimp connectors. Mates with unlatched male connectors. Dummy contact can be used for additional polarisation or keying of multiple connectors. Fits both female PC and Crimp housings. CRIMP HOOD A Total no. of contacts - 2 C C marker Cable entry Cable clamp A 7.71 View with lid removed, and typical crimp connector added M XX 98 10, 12, 14, 16, 18, 20, 26, 34 DUMMY CONTACT 7.65 ORDER CODE M

9 Female Crimp Housings Trio-Tek Part numbers are for housings only, see following page for Trio-Tek contacts. Contacts are rear-insertable. Crimp inspection window in housing. Mates with all standard Datamate L-Tek male connectors. Ideal for volume applications. SINGLE ROW A DOULE ROW A (Total no. of contacts - 1) x 2 Total no. of contacts A 3.45 A 5.45 TOOLS WIRE STRIPPING DETAILS Recommended Hand Crimp Tool Z Contact Removal Tool Z Open crimp contacts shown on following page. Instruction sheets available at /instructions Ø1.10 M80-69 X XX 98 0 Single Row 1 Double Row 98 Housing 02 to 07, 17 Single Row 04, 06, 08, 10, 12, 14, 16, 18, 20, 26, 34, 44 Double Row 157

10 Female Crimp Contacts Trio-Tek Trio-Tek contacts must be ordered separately, see previous page for applicable housings. Crimp contacts are available loose, or in continuous reeled format for automated crimping. CRIMP CONTACTS WIRE STRIPPING DETAILS Reeled Ø Loose TOOLS Recommended Hand Crimp Tool Z Contact Removal Tool Z Crimp housings shown on previous page. Instruction sheets available at /instructions. M80-2XX 00 XX 253 Trio-Tek Crimp AWG, Reeled 254 Trio-Tek Crimp AWG, Reeled 283 Trio-Tek Crimp AWG, Loose 284 Trio-Tek Crimp AWG, Loose 42 Gold + Tin 45 Gold 158

11 Male Single Row Vertical PC Polarised mouldings. Fully shrouded contacts. Mates with standard Datamate L-Tek female connectors. Can be used with optional Strain Relief straps, available to order separately: order code M NO LATCHES A LOCKING LATCH A (Total no. of contacts - 1) x 2 (Total no. of contacts - 1) x 2 A 3.55 A STRAIN RELIEF STRAP Order separately from connector Recommended PC oard Pattern Ø square View of Strain Relief strap in place ORDER CODE M x Ø0.90 min (optional) for Strain Relief Straps M80 - XXX XX XX 42 Gold + Tin 852 No Latches, 3mm 882 Locking Latch, 3mm 782 Locking Latch, 4.5mm 45 Gold 02 to 07, 17,

12 Male Double Row Vertical PC Polarised mouldings. Fully shrouded contacts. Mates with standard Datamate L-Tek female connectors. Can be used with optional Strain Relief straps, available to order separately: order code M NO LATCHES A LOCKING LATCH A Total no. of contacts - 2 Total no. of contacts - 2 A A STRAIN RELIEF STRAP Order separately from connector Recommended PC oard Pattern Ø square View of Strain Relief strap in place ORDER CODE M x Ø0.90 min (optional) for Strain Relief Straps 3mm TAIL 4.5mm TAIL No Latches Locking Latch M80 - XXX XX XX 42 Gold + Tin 45 Gold 04, 06, 08, 10, 12, 14, 16, 18, 20, 26, 34,

13 Male Single Row Horizontal PC Polarised mouldings. Fully shrouded contacts. Mates with standard Datamate L-Tek female connectors. Supplied with two Strain Relief straps per connector; spares available under order code M NO LATCHES A LOCKING LATCH A (Total no. of contacts - 1) x 2 (Total no. of contacts - 1) x 2 A 3.55 A STRAIN RELIEF STRAP Supplied with connector Recommended PC oard Pattern Ø square View of Strain Relief strap in place 4 x Ø0.90 min for Strain Relief Straps 843 No Latches, 3mm 842 Locking Latch, 3mm 792 Locking Latch, 4.5mm M80 - XXX XX XX 42 Gold + Tin 45 Gold 02 to 07, 17,

14 Male Double Row Horizontal PC Polarised mouldings. Fully shrouded contacts. Mates with standard Datamate L-Tek female connectors. Supplied with two Strain Relief straps per connector; spares available under order code M NO LATCHES A LOCKING LATCH A Total no. of contacts - 2 Total no. of contacts - 2 A A STRAIN RELIEF STRAP Supplied with connector Recommended PC oard Pattern Ø square View of Strain Relief strap in place 4 x Ø0.90 min for Strain Relief Straps 841 No Latches, 3mm 851 Locking Latch, 3mm 771 Locking Latch, 4.5mm M80 - XXX XX XX 42 Gold + Tin 45 Gold 04, 06, 08, 10, 12, 14, 16, 18, 20, 26, 34,

15 Male Vertical Surface Mount Mates with standard Datamate L-Tek female connectors. Can be used with optional Strain Relief straps, available to order separately: order code M Contact for tape & reel options. Optional pick and place cap. Gull wing SMT tails simplify inspection process. NO LATCHES A LOCKING LATCH A Total no. of contacts - 2 Total no. of contacts - 2 A A STRAIN RELIEF STRAP Order separately from connector Recommended PC oard Pattern 4 x Ø0.90 min (optional) for Strain Relief Straps square View of Strain Relief strap in place ORDER CODE M No Latches 828 Locking Latch M80-82X XX XX P 04, 06, 08, 10, 12, 14, 16, 18, 20, 26, 34 PICK AND PLACE CAP LANK No cap P Pick and place cap 42 Gold + Tin 45 Gold 163

16 Male Horizontal Surface Mount Mates with standard Datamate L-Tek female connectors. Supplied with two Strain Relief straps per connector; spares available under order code M Stamped contact ensures co-planarity. Contact for tape & reel options. NO LATCHES A LOCKING LATCH A Total no. of contacts - 2 Total no. of contacts - 2 A A STRAIN RELIEF STRAP Supplied with connector Recommended PC oard Pattern square View of Strain Relief strap in place x Ø0.90 min for Strain Relief Straps 665 No Latches 666 Locking Latch M80-66X XX Gold + Tin 04, 06, 08, 10, 12, 14, 16, 18, 20, 26, 34,

17 Male Crimp Kit Part numbers are for a complete kit of a housing and the applicable number of contacts. Contacts are rear insertable. Spare contacts are available - see the following page. ack potting & cable assembly service available, contact cables@harwin.com. SINGLE ROW Latches (when fitted) add 0.5mm to overall length 'A' A (Total no. of contacts - 1) x 2 DOULE ROW Latches (when fitted) add 0.5mm to overall length 'A' A Total no. of contacts - 2 A A TOOLS WIRE STRIPPING DETAILS Recommended Crimp Tool M22520/2-01 Positioner T5747 Contact Insertion/Removal Tool Z Spare contacts shown on following page. Instruction sheets available at /instructions. Ø1.10 M80-8XX XX 05 SINGLE ROW DOULE ROW Small ore (24-28 AWG), No Latches Large ore (22 AWG), No Latches Small ore (24-28 AWG), Locking Latch Large ore (22 AWG), Locking Latch 05 Gold 02, 03, 04, 05, 06, 07 Single Row 04, 06, 08, 10, 12 Double Row 165

18 Spare Male Crimp Contacts arrel Crimp Contacts are supplied with the connectors - see previous page. Use the order code for extra Spare crimps. CRIMP CONTACTS WIRE STRIPPING DETAILS Large ore (22 AWG) 8.63 Ø1.10 Small ore (24 to 28 AWG) Ident Groove TOOLS Recommended Crimp Tool M22520/2-01 Positioner T5747 Contact Insertion/Removal Tool Z Instruction sheets available at /instructions. M80-04X Large ore (22 AWG) 041 Small ore (24-28 AWG) 05 Gold 166