Ufyrede trykbeholdere Del 5: Inspektion og prøvning
|
|
- Sebastian Kjeldsen
- 4 år siden
- Visninger:
Transkript
1 Dansk standard DS/EN udgave Ufyrede trykbeholdere Del 5: Inspektion og prøvning Unfired pressure vessels Part 5: Inspection and testing
2 DS/EN København DS projekt: M ICS: Første del af denne publikations betegnelse er: DS/EN, hvilket betyder, at det er en europæisk standard, der har status som dansk standard. Denne publikations overensstemmelse er: IDT med: EN :2009 Issue 3: DS-publikationen er på engelsk. Denne publikation erstatter: DS/EN :2009, DS/EN /A2:2011, DS/EN /A1:2011 og DS/EN /A3:2011. DS-publikationstyper Dansk Standard udgiver forskellige publikationstyper. Typen på denne publikation fremgår af forsiden. Der kan være tale om: Dansk standard standard, der er udarbejdet på nationalt niveau, eller som er baseret på et andet lands nationale standard, eller standard, der er udarbejdet på internationalt og/eller europæisk niveau, og som har fået status som dansk standard DS-information publikation, der er udarbejdet på nationalt niveau, og som ikke har opnået status som standard, eller publikation, der er udarbejdet på internationalt og/eller europæisk niveau, og som ikke har fået status som standard, fx en teknisk rapport, eller europæisk præstandard DS-håndbog samling af standarder, eventuelt suppleret med informativt materiale DS-hæfte publikation med informativt materiale Til disse publikationstyper kan endvidere udgives tillæg og rettelsesblade DS-publikationsform Publikationstyperne udgives i forskellig form som henholdsvis fuldtekstpublikation (publikationen er trykt i sin helhed) godkendelsesblad (publikationen leveres i kopi med et trykt DS-omslag) elektronisk (publikationen leveres på et elektronisk medie) DS-betegnelse Alle DS-publikationers betegnelse begynder med DS efterfulgt af et eller flere præfikser og et nr., fx DS 383, DS/EN 5414 osv. Hvis der efter nr. er angivet et A eller Cor, betyder det, enten at det er et tillæg eller et rettelsesblad til hovedstandarden, eller at det er indført i hovedstandarden. DS-betegnelse angives på forsiden. Overensstemmelse med anden publikation: Overensstemmelse kan enten være IDT, EQV, NEQ eller MOD IDT: Når publikationen er identisk med en given publikation. EQV: Når publikationen teknisk er i overensstemmelse med en given publikation, men præsentationen er ændret. NEQ: Når publikationen teknisk eller præsentationsmæssigt ikke er i overensstemmelse med en given standard, men udarbejdet på baggrund af denne. MOD: Når publikationen er modificeret i forhold til en given publikation.
3 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN July 2009 ICS Supersedes EN :2002 English Version Unfired pressure vessels - Part 5: Inspection and testing Récipients sous pression non soumis à la flamme - Partie 5 : inspection et contrôles This European Standard was approved by CEN on 30 June Unbefeuerte Druckbehälter - Teil 5: Inspektion und Prüfung CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN :2009: E
4 Contents Page Foreword Scope Normative references Terms and definitions Performance of inspection and testing General Inspection Non-destructive testing (NDT) Technical documentation General Information to be contained in the technical documentation General description of the pressure vessel Conceptual design and construction drawings Descriptions and explanations necessary for an understanding of the drawings and diagrams and the operation of the pressure vessel Results of design calculations and examinations carried out Test reports Technical/manufacturing schedule Design review General Design review Inspection and testing during fabrication General Manufacturing procedures and construction drawings Material traceability General Special Conditions - Material marking Preparation for manufacturing processes General Joint preparation testing Inspection of vessel supports Inspection associated with forming Testing of areas subject to significant through thickness tensile stress Welding General Verification of welder and welding operator approval and procedures approval Inspection of repairs Non-destructive testing of welded joints Extent of non-destructive testing Determination of extent of non-destructive testing Performing non-destructive testing Description and acceptance level assessment of imperfections Stage of performance Procedure for non-destructive retesting Non-destructive testing documentation Destructive testing Extent of destructive testing Schedule for destructive testing Verification of destructive tests Records Heat-treatment
5 7 Subcontracted elements General Subcontracted welding related activities Subcontracted non-destructive testing activities Use of contract NDT personnel at the premises of the vessel manufacturer Subcontracting of NDT at a subcontractors premises Miscellaneous tests Calibration General Calibration procedure General Calibration Frequency Identification Registration Final assessment General Extent of final assessment Visual and dimensional inspection Review of documentation Proof test Post pressure test inspection Inspection of safety accessories Marking and declaration of compliance with the standard General Marking method Direct stamping Nameplate Marking units Marking contents Declaration of compliance with the standard Records Type of records Control and access of records Retention of records Shipping...50 Annex A (normative) Inspection and testing of serially produced pressure vessels...51 Annex B (normative) Detailed dimensional requirements for pressure vessels...57 Annex C (normative) Access and inspection openings, closing mechanisms and special locking elements...59 Annex D (informative) Leak Testing...71 Annex E (informative) Acoustic emission...72 Annex F (normative) Inspection and testing of pressure vessels or parts subject to creep...74 Annex G (normative) Inspection and testing of pressure vessels subject to cyclic loads...77 Annex H (informative) Declaration of compliance with this standard
6 Annex I (informative) Specific tests during construction to assist in-service inspection Annex Y (informative) History of EN Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of the EU Pressure Equipment Directive 97/23/EC Bibliography
7 Foreword This document (EN :2009) has been prepared by Technical Committee CEN/TC 54 Unfired pressure vessels, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2009, and conflicting national standards shall be withdrawn at the latest by December Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this document. This European Standard consists of the following Parts: Part 1: Part 2: Part 3: Part 4: Part 5: General. Materials. Design. Fabrication. Inspection and testing. Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron. CR , Unfired pressure vessels Part 7: Guidance on the use of conformity assessment procedures. Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys. CEN/TR , Unfired pressure vessels Part 9: Conformance of EN series to ISO This document supersedes EN :2002. This new edition incorporates the Amendments which have been approved previously by CEN members, and the corrected pages up to Issue 36 without any further technical change. Annex Y to EN :2009 and Annex Y to this Part provides details of significant technical changes between this European Standard and the previous edition. Amendments to this new edition may be issued from time to time and then used immediately as alternatives to rules contained herein. It is intended to deliver a new Issue of EN 13445:2009 each year, consolidating these Amendments and including other identified corrections. consolidates Amendments EN :2009/A1:2011, A2:2011 and A3:2011; it includes the corrected pages listed in Annex Y. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. 5
8 1 Scope This Part of this European Standard specifies the inspection and testing of individual and serially produced pressure vessels made of steels in accordance with EN :2009 subject to predominantly non_cyclic operation (i.e. vessels operating below 500 full equivalent pressure cycles). Special provisions for cyclic operation are given in EN :2009 and in Annex G of this Part. Special provisions for vessels or vessel parts working in the creep range are given in Clause 5, Clause 6, Clause 10, Annex H and Annex I of this Part. NOTE The responsibilities of parties involved in the conformity assessment procedures are given in Directive 97/23/EC. Guidance on this can be found in CR Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 287-1:2004, EN 287-1:2004/A2:2005, Qualification test of welders Fusion welding Part 1: Steels EN 473:2008, Non-destructive testing Qualification and certification of NDT personnel General principles. EN 571-1:1997, Non-destructive testing Penetrant testing Part 1: General principles CEN/TS 764-6:2004, Pressure equipment Part 6: Structure and content of operating instructions EN 583-4:2002, EN 583-4:2002/A1:2003, Non-destructive testing Ultrasonic examination Part 4: Examination for discontinuities perpendicular to the surface EN 895:1995, Destructive tests on welds in metallic materials Transverse tensile test EN 970:1997, Non-destructive examination of fusion welds Visual examination EN 1289:1998, EN 1289:1998/A1:2002, EN 1289:1998/A2:2003, Non-destructive testing of welds Penetrant testing of welds Acceptance levels EN 1290:1998, EN 1290:1998/A1:2002, EN 1290:1998/A2:2003, Non-destructive testing of welds Magnetic particle testing of welds EN 1291:1998, EN 1291:1998/A1:2002, EN 1291:1998/A2:2003, Non-destructive testing of welds Magnetic particle testing of welds Acceptance levels EN 1418:1997, Welding personnel Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials EN 1435:1997, EN 1435:1997/A1:2002, EN 1435:1997/A2:2003, Non-destructive testing of welds Radiographic testing of welded joints EN 1712:1997, EN 1712:1997/A1:2002, EN 1712:1997/A2:2003, Non-destructive testing of welds Ultrasonic testing of welded joints Acceptance levels 6
9 EN 1713:1998, EN 1713:1998/A1:2002, EN 1713:1998/A2:2003, Non-destructive testing of welds Ultrasonic testing Characterization of indications in welds EN 1714:1997, EN 1714:1997/A1:2002, EN 1714:1997/A2:2003, Non-destructive examination of welds Ultrasonic examination of welded joints EN 1779:1999, EN 1779:1999/A1:2003, Non-destructive testing Leak testing Criteria for method and technique selection EN 12062:1997, EN 12062:1997/A1:2002, EN 12062:1997/A2:2003, Non-destructive testing of welds General rules for metallic materials EN :2006, Non-destructive testing of welds Radiographic testing of welded joints Acceptance levels EN :2009, Unfired pressure vessels Part 2: General EN :2009, Unfired pressure vessels Part 2: Materials EN :2009, Unfired pressure vessels Part 3: Design EN :2009, Unfired pressure vessels Part 4: Fabrication EN ISO 4063:2000, Welding and allied processes Nomenclature of processes and reference numbers (ISO 4063:1998) EN ISO 5817:2007, Welding Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) Quality levels for imperfections (ISO 5817:2003) EN ISO :2007, Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding (ISO :2007) 3 Terms and definitions For the purposes of this European Standard the following terms and definitions apply. 3.1 design review procedure by which a manufacturer ascertains and attests that the design meets the requirements of this standard 3.2 design approval procedure by which a responsible authority ascertains and attests that the design meets the requirements of this standard 3.3 testing group grouping which determines the appropriate level of non-destructive testing (NDT) on a welded joint NOTE There are four testing groups. 3.4 inspection survey activity which assesses the compliance of the pressure vessel to the technical specification 7
Dansk standard DS/EN ISO udgave Campingtelte. Camping tents
Dansk standard DS/EN ISO 5912 2. udgave 2011-11-22 Campingtelte Camping tents DS/EN ISO 5912 København DS projekt: M245636 ICS: 97.200.30 Første del af denne publikations betegnelse er: DS/EN ISO, hvilket
Læs mereTekniske specifikationer for centrifugalpumper Klasse III
Dansk standard Tillæg DS/EN ISO 9908/A1 1. udgave 2011-06-08 Tekniske specifikationer for centrifugalpumper Klasse III Technical specifications for centrifugal pumps Class III Amendment 1 DS/EN ISO 9908/A1
Læs mereKosmetik Metoder til prøvning af solbeskyttelse In vivo-bestemmelse af UVA-beskyttelse
Dansk standard DS/EN ISO 24442 1. udgave 2012-02-01 Kosmetik Metoder til prøvning af solbeskyttelse In vivo-bestemmelse af UVA-beskyttelse Cosmetics Sun protection test methods In vivo determination of
Læs merePapir og karton Bestemmelse af tykkelse, densitet og massevolumen
Dansk standard DS/EN ISO 534 1. udgave 2012-01-04 Papir og karton Bestemmelse af tykkelse, densitet og massevolumen Paper and board Determination of thickness, density and specific volume DS/EN ISO 534
Læs merePulvermaling Del 7: Bestemmelse af massetab efter ophedning i ovn
Dansk standard DS/EN ISO 8130-7 1. udgave 2011-01-21 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 8130-7:2011 Pulvermaling Del 7: Bestemmelse af massetab efter ophedning
Læs mereMaintenance Documentation for maintenance
Dansk standard DS/EN 13460 3. udgave 2009-12-15 Vedligehold Dokumentation for vedligehold Maintenance Documentation for maintenance DS/EN 13460 København DS projekt: M245239 ICS: 01.110; 21.020 Første
Læs mereKrydderier og smagsstoffer Botanisk nomenklatur
Dansk standard DS/EN ISO 676 1. udgave 2009-07-23 Krydderier og smagsstoffer Botanisk nomenklatur Spices and condiments Botanical nomenclature DS/EN ISO 676 København DS projekt: M230052 ICS: 01.040.67;
Læs merePlast Bestemmelse af termoplasts massesmelteindeks (MFR) og volumensmelteindeks (MVR) Del 1: Standardmetode
Dansk standard DS/EN ISO 1133-1 1. udgave 2012-01-25 Plast Bestemmelse af termoplasts massesmelteindeks (MFR) og volumensmelteindeks (MVR) Del 1: Standardmetode Plastics Determination of the melt mass-flow
Læs mereDansk standard DS/EN Loft ladders Requirements, marking and testing. 1. udgave
Dansk standard DS/EN 14975 1. udgave 2007-02-26 Loftstiger Krav, mærkning og prøvning Loft ladders Requirements, marking and testing DS/EN 14975 København DS projekt: 55746 ICS: 97.145 Første del af denne
Læs mereMajs Bestemmelse af vandindhold (i forarbejdet korn og i hele korn)
Dansk standard DS/EN ISO 6540 1. udgave 2010-06-23 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 6540:2010 Majs Bestemmelse af vandindhold (i forarbejdet korn og i hele
Læs mereTeknisk tegning Flowdiagrammer til procesanlæg Generelle regler
Dansk Standard DS/EN ISO 10628 1. udgave Godkendelsesblad Godkendt:2001-04-06 Teknisk tegning Flowdiagrammer til procesanlæg Generelle regler Flow diagrams for process plants General rules DANSK STANDARD
Læs mereFritidsbåde Komfurer til flydende brændsel
Dansk standard DS/EN ISO 14895 1. udgave 2003-04-11 Fritidsbåde Komfurer til flydende brændsel Small craft Liquid-fuelled galley stoves DS/EN ISO 14895 København DS projekt: 47074 ICS: 47.080 Deskriptorer:
Læs mereCentrale strømforsyningssystemer
Dansk Standard DS/EN 50171 1. udgave 2001-08-29 Centrale strømforsyningssystemer Central power supply systems DS/EN 50171 København DS projekt: 30769 ICS: 29.200 Deskriptorer: belysning til nødudgang,elektriske
Læs mereIkke-destruktiv prøvning Lækprøvning Kriterier for valg af metode og teknik
Dansk Standard DS/EN 1779 2. udgave 2001-10-26 Ikke-destruktiv prøvning Lækprøvning Kriterier for valg af metode og teknik Non-destructive testing Leak testing Criteria for method and technique selection
Læs mereMiljøledelsessystemer Kravbeskrivelse med råd om anvendelse
Dansk standard DS/EN ISO 14001 2. udgave 2004-11-30 Miljøledelsessystemer Kravbeskrivelse med råd om anvendelse Environmental management systems Requirements with guidance for use DS/EN ISO 14001 København
Læs mereBatchstyring Del 1: Modeller og terminologi
Dansk Standard DS/EN 61512-1 1. udgave 2001-08-29 Batchstyring Del 1: Modeller og terminologi Batch control Part 1: Models and terminology DS/EN 61512-1 København DS projekt: 26009 ICS: 25.040.40 Deskriptorer:
Læs merePalmeolie Bestemmelse af indeks for forringelse af blegningsevne (DOBI) samt bestemmelse af karotinindhold
Dansk standard DS/EN ISO 17932 2. udgave 2011-11-07 Palmeolie Bestemmelse af indeks for forringelse af blegningsevne (DOBI) samt bestemmelse af karotinindhold Palm oil Determination of the deterioration
Læs mereCold rolled narrow steel strip Tolerances on dimensions and shape
Dansk standard DS/EN 10140 3. udgave 2009-06-02 Koldvalset båndstål Tolerancer for dimensioner og form Cold rolled narrow steel strip Tolerances on dimensions and shape DS/EN 10140 København DS projekt:
Læs mereMaskinsikkerhed Elektrisk udstyr på maskiner Del 1: Generelle krav
Dansk standard Tillæg DS/EN 60204-1/A1 1. udgave 2009-03-13 Maskinsikkerhed Elektrisk udstyr på maskiner Del 1: Generelle krav Safety of machinery Electrical equipment of machines Part 1: General requirements
Læs mereVinduer og døre Vandtæthed Klassifikation
Dansk Standard DS/EN 12208 1. udgave Godkendt:2000-12-29 Vinduer og døre Vandtæthed Klassifikation Windows and doors Watertightness Classification DANSK STANDARD - Eftertryk uden tilladelse forbudt Kollegievej
Læs mereGeometriske produktspecifikationer (GPS) Længdemåleudstyr højdemålere Design og metrologiske karakteristika
Dansk standard DS/EN ISO 13225 1. udgave 2012-05-23 Geometriske produktspecifikationer (GPS) Længdemåleudstyr højdemålere Design og metrologiske karakteristika Geometrical product specifications (GPS)
Læs mereSlanger og rør af gummi og plast Måling af fleksibilitet og stivhed Del 2: Bøjeprøvning ved lavere temperaturer end rumtemperatur
Dansk standard DS/EN ISO 10619-2 1. udgave 2012-01-24 Slanger og rør af gummi og plast Måling af fleksibilitet og stivhed Del 2: Bøjeprøvning ved lavere temperaturer end rumtemperatur Rubber and plastics
Læs mereMalinger og lakker Belysning og procedure for visuel vurdering af belægninger
Dansk standard DS/EN ISO 13076 1. udgave 2012-08-10 Malinger og lakker Belysning og procedure for visuel vurdering af belægninger Paints and varnishes Lighting and procedure for visual assessments of coatings
Læs mereLampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler
Dansk standard Tillæg DS/EN 60061-1/A41 (elektronisk) 1. udgave 2010-06-24 Lampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler Lamp caps and holders together
Læs mereDansk standard DS/EN Risk management Risk assessment techniques. 1. udgave
Dansk standard DS/EN 31010 1. udgave 2010-05-20 Risikoledelse Teknikker til risikovurdering Risk management Risk assessment techniques DS/EN 31010 København DS projekt: M231261 ICS: 03.100.01 Første del
Læs mereAkustik Deklarering og verificering af støj fra maskiner og udstyr
Dansk standard DS/EN ISO 4871 2. udgave 2009-09-09 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 4871:2009 Akustik Deklarering og verificering af støj fra maskiner og udstyr
Læs mereDansk standard DS/EN Weibull analysis. 1. udgave
Dansk standard DS/EN 61649 1. udgave 2008-12-10 Weilbull-analyse Weibull analysis DS/EN 61649 København DS projekt: M219606 ICS: 03.120.30 Første del af denne publikations betegnelse er: DS/EN, hvilket
Læs merePrøvningsmetoder til hjælpekomponenter til murværk Del 4: Bestemmelse af lastkapacitet og lastnedbøjning i bjælkesko
Dansk standard DS/EN 846-4 + A1 2. udgave 2002-12-04 Prøvningsmetoder til hjælpekomponenter til murværk Del 4: Bestemmelse af lastkapacitet og lastnedbøjning i bjælkesko Methods of test for ancillary components
Læs mereDansk Standard DS/EN udgave. Flymateriel
Dansk Standard DS/EN 3961 1. udgave Godkendt:2001-07-11 Flymateriel Aerospace series Gold base alloy AU-B40001 Filler metal for brazing-rolled foil DANSK STANDARD - Eftertryk uden tilladelse forbudt Kollegievej
Læs merePackaging Flexible plastic/metal laminate tubes Dimensions and tolerances of nozzle S 13
Dansk standard DS/EN 14979 1. udgave 2006-03-31 Emballage Fleksible laminattuber af plast/metal Dimensioner og tolerancer for dyse S 13 Packaging Flexible plastic/metal laminate tubes Dimensions and tolerances
Læs mereAkustik Støjreduktion Kabiner Laboratorie- og in situ-målinger
Dansk standard DS/EN ISO 11957 2. udgave 2009-09-22 Akustik Støjreduktion Kabiner Laboratorie- og in situ-målinger Acoustics Determination of sound insulation performance of cabins Laboratory and in situ
Læs mereRotordynamiske pumper Godkendelsesprøvning af hydraulisk ydeevne Klasse 1, 2 og 3
Dansk standard DS/EN ISO 9906 2. udgave 2012-06-08 Rotordynamiske pumper Godkendelsesprøvning af hydraulisk ydeevne Klasse 1, 2 og 3 Rotodynamic pumps Hydraulic performance acceptance tests Grades 1, 2
Læs mereDansk standard DS/EN 13429. Packaging Reuse. 3. udgave 2006-10-12
Dansk standard DS/EN 13429 3. udgave 2006-10-12 Emballage Genbrug Packaging Reuse DS/EN 13429 København DS projekt: M215981 ICS: 13.030.50; 55.020 Første del af denne publikations betegnelse er: DS/EN,
Læs mereElektrostatik Del 4-1: Standardprøvningsmetoder. anvendelser Gulvbelægningers og monterede gulves elektrostatiske egenskaber
Dansk standard Tillæg DS/EN 61340-4-1:2004/A1:2015 1. udgave 2015-06-23 Elektrostatik Del 4-1: Standardprøvningsmetoder for specifikke anvendelser Gulvbelægningers og monterede gulves elektrostatiske egenskaber
Læs mereSpecifikation og kvalificering af svejseprocedurer for metalliske materialer Kvalificering ved godkendelse af en standardsvejseprocedure
Dansk standard DS/EN ISO 15612 2. udgave 2005-12-22 Specifikation og kvalificering af svejseprocedurer for metalliske materialer Kvalificering ved godkendelse af en standardsvejseprocedure Specification
Læs mereNon-destructive testing of welds Time-of-flight diffraction technique (TOFD) Acceptance levels
Dansk standard DS/EN 15617 1. udgave 2009-03-24 Ikke-destruktiv prøvning af svejsninger TOFD-teknik Acceptniveauer Non-destructive testing of welds Time-of-flight diffraction technique (TOFD) Acceptance
Læs mereLegepladsredskaber og -underlag Del 11: Tredimensionelle klatrenet Supplerende specifikke sikkerhedskrav og prøvningsmetoder
Dansk standard DS/EN 1176-11 2. udgave 2009-04-22 Legepladsredskaber og -underlag Del 11: Tredimensionelle klatrenet Supplerende specifikke sikkerhedskrav og prøvningsmetoder Playground equipment and surfacing
Læs mereMobil og bærbar DVB-T/H-radiotilslutning Del 2: Grænsefladeoverensstemmelsesprøvning
Dansk standard DS/EN 62002-2 1. udgave 2006-12-12 Mobil og bærbar DVB-T/H-radiotilslutning Del 2: Grænsefladeoverensstemmelsesprøvning Mobile and portable DVB-T/H radio access Part 2: Interface conformance
Læs mereLampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler
Dansk standard Tillæg DS/EN 60061-1/A47 (elektronisk) 1. udgave 2012-04-23 Lampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler Lamp caps and holders together
Læs mereSteel castings Austenitic manganese steel castings
Dansk standard DS/EN 10349 1. udgave 2009-11-05 Stålstøbegods Austenitisk manganstålstøbegods Steel castings Austenitic manganese steel castings DS/EN 10349 København DS projekt: M220956 ICS: 77.140.80
Læs mereWc-kummer og wc-møbler Tilslutningsdimensioner
Dansk standard DS/EN 33 3. udgave 2011-10-03 Wc-kummer og wc-møbler Tilslutningsdimensioner WC pans and WC suites Connecting dimensions DS/EN 33 København DS projekt: M235262 ICS: 91.140.70 Første del
Læs mereEurocode 1: Last på bærende konstruktioner Del 1-3: Generelle laster Snelast
Dansk standard DS/EN 1991-1-3 2. udgave 2007-06-22 Eurocode 1: Last på bærende konstruktioner Del 1-3: Generelle laster Snelast Eurocode 1 Actions on structures Part 1-3: General actions - Snow loads DS/EN
Læs mereTemperature Electromotive force (EMF) tables for pure-element thermocouple combinations
Dansk standard DS/EN 62460 1. udgave 2008-10-14 Temperatur Elektromotorisk kraft (EMF) Tabeller for kombinationer af rene termoelementer Temperature Electromotive force (EMF) tables for pure-element thermocouple
Læs mereStyring af rumfartsprojekter. Generelle krav. Del 1: Politik og principper
Dansk Standard DS/EN 13290-1 1. udgave Godkendt:2000-04-13 Styring af rumfartsprojekter. Generelle krav. Del 1: Politik og principper Space project management - General requirements - Part 1: Policy and
Læs mereBordtennis Del 2: Netstolper Krav og prøvningsmetoder
Dansk standard DS/EN 14468-2:2015 2. udgave 2015-04-29 Bordtennis Del 2: Netstolper Krav og prøvningsmetoder Table tennis Part 2: Posts for net assemblies Requirements and test methods DS/EN 14468-2:2015
Læs mereSkovbrugs- og havebrugsmaskiner Vibrationsprøvning af bærbare håndholdte maskiner med forbrændingsmotor Vibrationer ved håndtagene
Dansk standard DS/EN ISO 22867 3. udgave 2012-01-25 Skovbrugs- og havebrugsmaskiner Vibrationsprøvning af bærbare håndholdte maskiner med forbrændingsmotor Vibrationer ved håndtagene Forestry and gardening
Læs mereTilsatsmaterialer til svejsning Pulverfyldte elektroder til metallysbuesvejsning
Dansk standard DS/EN ISO 12153 1. udgave 2012-06-08 Tilsatsmaterialer til svejsning Pulverfyldte elektroder til metallysbuesvejsning med eller uden beskyttelsesgas af nikkel og nikkellegeringer Klassifikation
Læs mereGrænseflade for digital lyd Del 1: Generelt
Dansk standard DS/EN 60958-1 3. udgave 2008-10-31 Grænseflade for digital lyd Del 1: Generelt Digital audio interface Part 1: General DS/EN 60958-1 København DS projekt: M222433 ICS: 33.160.30 Første del
Læs mereKontormøbler Kontorstole Del 1: Mål Bestemmelse af dimensioner
Dansk Standard DS/EN 1335-1 2. udgave Godkendt: 2001-02-21 Kontormøbler Kontorstole Del 1: Mål Bestemmelse af dimensioner Office furniture Office work chair Part 1: Dimensions Determination of dimensions
Læs mereGasfyrede tørretumblere af type B med en nominel belastning, der ikke overstiger 20 kw Del 2: Rationel energiudnyttelse
Dansk Standard DS/EN 12752-2 2. udgave 2001-11-09 Gasfyrede tørretumblere af type B med en nominel belastning, der ikke overstiger 20 kw Del 2: Rationel energiudnyttelse Gas-fired tumble dryers of type
Læs mereFacility Management Del 2: Vejledning i udarbejdelse af Facility Management-aftaler
Dansk standard DS/EN 15221-2 2. udgave 2008-06-30 Facility Management Del 2: Vejledning i udarbejdelse af Facility Management-aftaler Facility Management Part 2: Guidance on how to prepare Facility Management
Læs mereKøkkengrej Grafiske symboler (piktogrammer)
Dansk standard DS/EN 14916 1. udgave 2005-11-14 Køkkengrej Grafiske symboler (piktogrammer) Domestic cookware Graphical symbols (pictograms) DS/EN 14916 København DS projekt: 55114 ICS: 01.080.20; 97.040.60
Læs mereMatematiske udtryk for pålidelighed, tilgængelighed og vedligehold samt for understøttelse af vedligehold
Dansk Standard DS/EN 61703 1. udgave 2002-05-01 Matematiske udtryk for pålidelighed, tilgængelighed og vedligehold samt for understøttelse af vedligehold Mathematical expressions for reliability,availability,
Læs mereKapslingsklasser (IP-kode)
Dansk Standard DS/EN 60529+A1 1. udgave 2002-04-05 Kapslingsklasser (IP-kode) Degrees of protection provided by enclosures (IP Code) DS/EN 60529+A1 København DS projekt: 47050 ICS: 29.020 Deskriptorer:
Læs merePackaging Requirements for the use of European Standards in the field of packaging and packaging waste
Dansk standard DS/EN 13427 3. udgave 2006-10-12 Emballage Krav til anvendelsen af europæiske standarder for emballage og emballageaffald Packaging Requirements for the use of European Standards in the
Læs mereStøbning Ultralydsprøvning Del 3: Støbegods af SG-jern
Dansk standard DS/EN 12680-3 2. udgave 2012-01-16 Støbning Ultralydsprøvning Del 3: Støbegods af SG-jern Founding Ultrasonic testing Part 3: Spheroidal graphite cast iron castings DS/EN 12680-3 København
Læs mereFugtindhold af et stykke savet træ Del 2: Vurdering ved elektrisk modstandsmetode
Dansk Standard DS/EN 13183-2 1. udgave 2002-04-30 Fugtindhold af et stykke savet træ Del 2: Vurdering ved elektrisk modstandsmetode Moisture content of a piece of sawn timber Part 2: Estimation by electrical
Læs mereElmålingsudstyr (vekselstrøm) Særlige krav Del 23: Statiske målere til reaktiv energi (klasse 2 og 3)
Dansk standard DS/EN 62053-23 1. udgave 2003-04-11 Elmålingsudstyr (vekselstrøm) Særlige krav Del 23: Statiske målere til reaktiv energi (klasse 2 og 3) Electricity metering equipment (a.c.) Particular
Læs mereSolcelleanlæg Termer, definitioner og symboler
DS-information DS/CLC/TS 61836 1. udgave 2009-06-26 Solcelleanlæg Termer, definitioner og symboler Solar photovoltaic energy systems Terms, definitions and symbols DS/CLC/TS 61836 København DS projekt:
Læs mereSvejsekoordination Opgaver og ansvarsforhold
Dansk standard DS/EN ISO 14731 1. udgave 2006-11-06 Svejsekoordination Opgaver og ansvarsforhold Welding coordination Tasks and responsibilities DS/EN ISO 14731:2006 København DS projekt: 55660 ICS: 25.160.01
Læs mereTransportbånd Bestemmelse af trækstyrken for mekaniske forbindelser Statisk prøvningsmetode
Dansk Standard DS/EN ISO 1120 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION Transportbånd Bestemmelse af trækstyrken for mekaniske forbindelser Statisk prøvningsmetode Conveyor belts
Læs mereUdstyr til tilslutning af belysningsarmaturer til husholdningsbrug o.l. Del 2: Normblade for DCL
Dansk standard DS/EN 61995-2 1. udgave 2009-06-10 Udstyr til tilslutning af belysningsarmaturer til husholdningsbrug o.l. Del 2: Normblade for DCL Devices for the connection of luminaires for household
Læs mereMultimedia quality Method of assessment of synchronization of audio and video
Dansk standard DS/EN 62503 1. udgave 2008-10-31 Multimediekvalitet Metode til fastsættelse af synkronisering mellem lyd og billede Multimedia quality Method of assessment of synchronization of audio and
Læs mereGymnastikudstyr Heste og bukke Funktions- og sikkerhedskrav, prøvningsmetoder
Dansk standard DS/EN 12196 2. udgave 2003-03-24 Gymnastikudstyr Heste og bukke Funktions- og sikkerhedskrav, prøvningsmetoder Gymnastic equipment Horses and bucks Functional and safety requirements, test
Læs mereJernbaneudstyr Svejsning af jernbanekøretøjer og -komponenter Del 4: Produktionskrav
Dansk standard DS/EN 15085-4 1. udgave 2007-11-06 Jernbaneudstyr Svejsning af jernbanekøretøjer og -komponenter Del 4: Produktionskrav Railway applications - Welding of railway vehicles and components
Læs mereJernbaneudstyr Svejsning af jernbanekøretøjer og -komponenter Del 2: Kvalitetskrav og certificering af fabrikanten
Dansk standard DS/EN 15085-2 1. udgave 2007-11-06 Jernbaneudstyr Svejsning af jernbanekøretøjer og -komponenter Del 2: Kvalitetskrav og certificering af fabrikanten Railway applications Welding of railway
Læs mereLedelse af pålidelighedsaktiviteter Del 3-11: Anvendelsesvejledning Pålidelighedscentreret vedligehold (RCM)
Dansk standard DS/EN 60300-3-11 1. udgave 2009-12-10 Ledelse af pålidelighedsaktiviteter Del 3-11: Anvendelsesvejledning Pålidelighedscentreret vedligehold (RCM) Dependability management Part 3-11: Application
Læs mereTrækonstruktioner Bestemmelse af dyblers brudmoment
Dansk standard DS/EN 409 2. udgave 2009-06-24 Trækonstruktioner Bestemmelse af dyblers brudmoment Timber structures Test methods Determination of the yield moment of dowel type fasteners DS/EN 409 København
Læs mereControl technology Rules for the designation of measuring instruments
Dansk standard DS/EN 62419 1. udgave 2009-03-10 Styringsteknologi Regler for benævnelse af måleinstrumenter Control technology Rules for the designation of measuring instruments DS/EN 62419 København DS
Læs mereInstrumenttransformere Del 8: Elektroniske strømtransformere
Dansk standard DS/EN 60044-8 1. udgave 2002-10-24 Instrumenttransformere Del 8: Elektroniske strømtransformere Instrument transformers - Part 8: Electronic current transformers DS/EN 60044-8 København
Læs mereUfyrede trykbeholdere Del 5: Inspektion og prøvning
Dansk standard DS/EN 13445-5 7. udgave 2014-10-22 Ufyrede trykbeholdere Del 5: Inspektion og prøvning Unfired pressure vessels Part 5: Inspection and testing DS/EN 13445-5 København DS projekt: M289778
Læs mereKølesystemer og varmepumper Ventiler Krav, prøvning og mærkning
Dansk standard DS/EN 12284 1. udgave 2003-10-23 Kølesystemer og varmepumper Ventiler Krav, prøvning og mærkning Refrigerating systems and heat pumps Valves Requirements, testing and marking DS/EN 12284
Læs mereHjælpemidler til personer med funktionsevnenedsættelse Klassifikation og terminologi
Dansk standard DS/EN ISO 9999 6. udgave 2007-12-19 Hjælpemidler til personer med funktionsevnenedsættelse Klassifikation og terminologi Assistive products for persons with disability Classification and
Læs mereGrænseflade for digital lyd Del 1: Generelt
Dansk standard Tillæg DS/EN 60958-1/A1 1. udgave 2014-09-02 Grænseflade for digital lyd Del 1: Generelt Digital audio interface Part 1: General DS/EN 60958-1/A1 København DS projekt: M277911 ICS: 33.160.30
Læs mereLiming materials Determination of the breakdown of granulated calcium and calcium/magnesium carbonates under the influence of water
Dansk standard DS/EN 15704 1. udgave 2009-01-23 Jordbrugskalk Bestemmelse af nedbrydning af granuleret calcium- og calcium/magnesiumcarbonater påvirket af vand Liming materials Determination of the breakdown
Læs mereKlassifikation og betegnelse af dokumenter for fabriksanlæg, anlæg og udstyr Del 1: Regler og klassifikationstabeller
Dansk standard DS/EN 61355-1 2. udgave 2008-07-04 Klassifikation og betegnelse af dokumenter for fabriksanlæg, anlæg og udstyr Del 1: Regler og klassifikationstabeller Classification and designation of
Læs mereVentilation i bygninger Symboler, terminologi og grafiske symboler
Dansk standard DS/EN 12792 1. udgave 2003-12-17 Ventilation i bygninger Symboler, terminologi og grafiske symboler Ventilation for buildings Symbols, terminology and graphical symbols DS/EN 12792 København
Læs mereIntegration af virksomhedens styringssystem Del 1: Modeller og terminologi
Dansk standard DS/EN 62264-1 1. udgave 2008-02-01 Integration af virksomhedens styringssystem Del 1: Modeller og terminologi Enterprise-control system integration DS/EN 62264-1 København DS projekt: M222179
Læs mereStearinlys Produktsikkerhedsmærkning
Dansk standard DS/EN 15494 1. udgave 2007-11-12 Stearinlys Produktsikkerhedsmærkning Candles Product safety labels DS/EN 15494 København DS projekt: M212730 ICS: 13.120; 97.180 Første del af denne publikations
Læs mereIkke-destruktiv prøvning Karakterisering og verificering af udstyr til ultralydprøvning Del 3: Kombineret udstyr
Dansk Standard DS/EN 12668-3 1. udgave Godkendt:2000-08-25 Ikke-destruktiv prøvning Karakterisering og verificering af udstyr til ultralydprøvning Del 3: Kombineret udstyr Non-destructive testing Characterization
Læs mereHalvlederelementer Mekaniske og klimatiske prøvningsmetoder Del 33: Accelereret fugtbestandighed Objektiv autoklav
Dansk standard DS/EN 60749-33 1. udgave 2004-04-29 Halvlederelementer Mekaniske og klimatiske prøvningsmetoder Del 33: Accelereret fugtbestandighed Objektiv autoklav Semiconductor devices Mechanical and
Læs mereJern og stål Ultralydprøvning af H-profiler med parallelle flanger og IPE-profiler
Dansk Standard DS/EN 10306 1. udgave 2002-01-31 Jern og stål Ultralydprøvning af H-profiler med parallelle flanger og IPE-profiler Iron and steel Ultrasonic testing of H beams with parallel flanges and
Læs mereEurocode 7: Geoteknik Del 1: Generelle regler
Dansk standard Tillæg DS/EN 1997-1/A1 1. udgave 2014-02-03 Eurocode 7: Geoteknik Del 1: Generelle regler Eurocode 7: Geotechnical design Part 1: General rules DS/EN 1997-1/A1 København DS projekt: M267839
Læs mereForkoblingsenheder for lysstofrør Krav til ydeevne
Dansk standard DS/EN 60921 2. udgave 2005-02-10 Forkoblingsenheder for lysstofrør Krav til ydeevne Ballasts for tubular fluorescent lamps Performance requirements DS/EN 60921 København DS projekt: 49567
Læs mereCOPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 8501-4:2007#
Dansk standard DS/EN ISO 8501-4 1. udgave 2007-01-29 Forbehandling af ståloverflader før påføring af maling og lignende produkter Visuel vurdering af overfladens renhed Del 4: Karakterisering af overfladens
Læs mereGødning Betegnelser og specifikationer
DS-information DS/CEN/CR 12949 1. udgave 2003-12-19 Gødning Betegnelser og specifikationer Fertilizers Denominations and specifications DS/CEN/CR 12949 København DS projekt: 34104 ICS: 65.080 Deskriptorer:
Læs mereGødning Ekstraktion af vandopløseligt calcium, magnesium, natrium og svovl i form af sulfat
Dansk standard DS/EN 15961 1. udgave 2012-01-06 Gødning Ekstraktion af vandopløseligt calcium, magnesium, natrium og svovl i form af sulfat Fertilizers Extraction of water-soluble calcium, magnesium, sodium
Læs mereJernbaneanvendelser Datakommunikation, signallering og databehandling Del 1: Sikkerhedsrelateret kommunikation i lukkede transmissionssystemer
Dansk Standard DS/EN 50159-1 1. udgave 2001-10-31 Jernbaneanvendelser Datakommunikation, signallering og databehandling Del 1: Sikkerhedsrelateret kommunikation i lukkede transmissionssystemer Railway
Læs mereLoftstiger Krav, mærkning og prøvning
Dansk standard DS/EN 14975 + A1 2. udgave 2010-08-26 Loftstiger Krav, mærkning og prøvning Loft ladders Requirements, marking and testing DS/EN 14975 + A1 København DS projekt: M249560 ICS: 97.145 Første
Læs mereStigetaburetter. Dansk standard DS/EN Step stools. 1. udgave
Dansk standard DS/EN 14183 1. udgave 2004-01-29 Stigetaburetter Step stools DS/EN 14183 København DS projekt: 46835 ICS: 97.145 Deskriptorer: klatreudstyr,sikkerhedsudstyr,stiger,trappestiger,sikkerhedskrav,taburetter,stigeskamler,skamler
Læs mereKobber og kobberlegeringer Betegnelser for materialetilstand
Dansk standard DS/EN 1173 2. udgave 2008-05-14 Kobber og kobberlegeringer Betegnelser for materialetilstand Copper and copper alloys Material condition designation DS/EN 1173 København DS projekt: M222779
Læs mereFyldstoffer til malinger Specifikationer og prøvningsmetoder Del 15: Keramisk siliciumdioxid
Dansk Standard DS/EN ISO 3262-15 1. udgave Godkendt:2000-07-10 Fyldstoffer til malinger Specifikationer og prøvningsmetoder Del 15: Keramisk siliciumdioxid Extenders for paints - Specifications and methods
Læs mereEksplosionsfast udstyr
Dansk standard DS/EN 14460 1. udgave 2006-05-24 Eksplosionsfast udstyr Explosion resistant equipment DS/EN 14460 København DS projekt: 50560 ICS: 13.230 Første del af denne publikations betegnelse er:
Læs mereGlaserede lerrør, fittings og rørsamlinger til afløbsledninger Del 10: Ydeevnekrav
Dansk standard DS/EN 295-10 1. udgave 2005-08-12 Glaserede lerrør, fittings og rørsamlinger til afløbsledninger Del 10: Ydeevnekrav Vitrified clay pipes and fittings and pipe joints for drains and sewers
Læs mereFertilizers Determination of the water-soluble potassium content
Dansk standard DS/EN 15477 1. udgave 2009-02-16 Gødning Bestemmelse af vandopløseligt kalium Fertilizers Determination of the water-soluble potassium content DS/EN 15477 København DS projekt: M229380 ICS:
Læs mereAustenitiske, austenitisk-ferritiske og ferritiske langssvejste rustfrie stålrør til fødevareindustri og kemisk industri
Dansk standard DS/EN 10357 1. udgave 2014-01-09 Austenitiske, austenitisk-ferritiske og ferritiske langssvejste rustfrie stålrør til fødevareindustri og kemisk industri Austenitic, austenitic-ferritic
Læs mereFaste modstande til brug i elektronisk udstyr Del 1: Generisk specifikation
Dansk standard Tillæg DS/EN 60115-1:2011/ A11:2015 1. udgave 2015-05-18 Faste modstande til brug i elektronisk udstyr Del 1: Generisk specifikation Fixed resistors for use in electronic equipment Part
Læs mereGrænseflade for digital lysstyring (DALI) Del 208: Særlige krav til kontroludstyr Omskifterfunktion (udstyrstype 7)
Dansk standard DS/EN 62386-208 1. udgave 2009-09-22 Grænseflade for digital lysstyring (DALI) Del 208: Særlige krav til kontroludstyr Omskifterfunktion (udstyrstype 7) Digital addressable lighting Interface
Læs mere