Tanke til transport af farligt gods Prøvning, inspektion og mærkning af metaltanke
|
|
- Katrine Mørk
- 8 år siden
- Visninger:
Transkript
1 Dansk standard DS/EN 12972: udgave Tanke til transport af farligt gods Prøvning, inspektion og mærkning af metaltanke Tanks for transport of dangerous goods Testing, inspection and marking of metallic tanks
2 DS/EN 12972:2015 København DS projekt: M ICS: ; Første del af denne publikations betegnelse er: DS/EN, hvilket betyder, at det er en europæisk standard, der har status som dansk standard. Denne publikations overensstemmelse er: IDT med: EN 12972:2015. DS-publikationen er på engelsk. Denne publikation erstatter: DS/EN 12972:2007. DS-publikationstyper Dansk Standard udgiver forskellige publikationstyper. Typen på denne publikation fremgår af forsiden. Der kan være tale om: Dansk standard standard, der er udarbejdet på nationalt niveau, eller som er baseret på et andet lands nationale standard, eller standard, der er udarbejdet på internationalt og/eller europæisk niveau, og som har fået status som dansk standard DS-information publikation, der er udarbejdet på nationalt niveau, og som ikke har opnået status som standard, eller publikation, der er udarbejdet på internationalt og/eller europæisk niveau, og som ikke har fået status som standard, fx en teknisk rapport, eller europæisk præstandard DS-håndbog samling af standarder, eventuelt suppleret med informativt materiale DS-hæfte publikation med informativt materiale Til disse publikationstyper kan endvidere udgives tillæg og rettelsesblade DS-publikationsform Publikationstyperne udgives i forskellig form som henholdsvis fuldtekstpublikation (publikationen er trykt i sin helhed) godkendelsesblad (publikationen leveres i kopi med et trykt DS-omslag) elektronisk (publikationen leveres på et elektronisk medie) DS-betegnelse Alle DS-publikationers betegnelse begynder med DS efterfulgt af et eller flere præfikser og et nr., fx DS 383, DS/EN 5414 osv. Hvis der efter nr. er angivet et A eller Cor, betyder det, enten at det er et tillæg eller et rettelsesblad til hovedstandarden, eller at det er indført i hovedstandarden. DS-betegnelse angives på forsiden. Overensstemmelse med anden publikation: Overensstemmelse kan enten være IDT, EQV, NEQ eller MOD IDT: Når publikationen er identisk med en given publikation. EQV: Når publikationen teknisk er i overensstemmelse med en given publikation, men præsentationen er ændret. NEQ: Når publikationen teknisk eller præsentationsmæssigt ikke er i overensstemmelse med en given standard, men udarbejdet på baggrund af denne. MOD: Når publikationen er modificeret i forhold til en given publikation.
3 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN February 2015 ICS ; Supersedes EN 12972:2007 English Version Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks Citernes destinées au transport des matières dangereuses - Épreuve, contrôle et marquage des citernes métalliques Tanks für die Beförderung gefährlicher Güter - Prüfung, Inspektion und Kennzeichnung von Metalltanks This European Standard was approved by CEN on 5 December CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12972:2015 E
4 Contents Page Foreword...3 Introduction Scope Normative references Terms and definitions Inspections and tests General Inspection for type approval Initial inspection Periodic inspection Intermediate inspection Exceptional checks Procedures and documentation for inspections and tests General Examination of documents Check of the design characteristics Inspection of the tank interior Inspection of the tank exterior Hydraulic pressure test Vacuum testing Leakproofness test Determination of capacity Inspection of service equipment Inspection of frame or other structural equipment of portable tanks and tank containers Dynamic longitudinal impact test Test report, certification and marking Annex A (informative) Applicable items of tank inspection Survey Table Annex B (informative) Technical data for type approval Annex C (informative) Hydraulic pressure testing with gases hazards and precautions Annex D (informative) Certificate of initial, periodic and intermediate inspection and exceptional check Annex E (normative) Tank plates for fixed tanks (tank vehicles) and demountable tanks for the transport of dangerous goods E.1 Tank plate E.2 Content of the marking of the tank plate Annex F (normative) Tank plates for tank containers or portable tanks for the transport of dangerous goods F.1 Tank plate for tank containers or portable tanks for the transport of dangerous liquids and solids F.2 Tank plate for tank containers or portable tanks for the transport of gases Bibliography
5 Foreword This document (EN 12972:2015) has been prepared by Technical Committee CEN/TC 296 Tanks for transport of dangerous goods, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2015 and conflicting national standards shall be withdrawn at the latest by August Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12972:2007. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. Compared with EN 12972:2007 the following fundamental changes have been made: a) alignment of the standard with RID 2013 [1] and ADR 2013 [2]; and b) updating of the normative references. The document has been submitted for reference into the RID and/or in the technical annexes of the ADR. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. 3
6 Introduction The types and frequencies of the inspections and tests as well as the responsibilities are given by the relevant regulations concerning the transport of dangerous goods. 4
7 1 Scope This European Standard specifies testing, inspection and marking for the type approval, initial inspection, periodic inspection, intermediate inspection and exceptional check of metallic tanks (shell and equipment) of fixed tanks (tank vehicles), demountable tanks, rail tank wagons, portable tanks and tank containers for the transport of dangerous goods. This European Standard is not applicable to battery-vehicles and battery-wagons comprising cylinders, tubes, pressure drums, bundles of cylinders and multiple element gas containers (MEGCs), independent of whether the elements are receptacles or tanks. It is essential that the requirements of the applicable regulations for the transport of dangerous goods prevail in all cases over those of this standard. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 590, Automotive fuels - Diesel - Requirements and test methods EN 837-1, Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing EN 837 2, Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges EN 837-3, Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing EN , Offshore containers and associated lifting sets - Part 1: Offshore container - Design, manufacture and marking EN :2012, Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements EN ISO , Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO ) EN ISO , Qualification testing of welders - Fusion welding - Part 1: Steels (ISO ) EN ISO , Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO ) EN ISO , Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO ) EN ISO , Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO ) EN ISO 14731, Welding coordination - Tasks and responsibilities (ISO 14731) EN ISO 14732, Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732) EN ISO 15607, Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607) 5
8 EN ISO , Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO ) EN ISO , Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO ) EN ISO , Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO ) IMO MSC/Circ. 860, Guidelines for the approval of offshore containers handled in open seas UN Manual of Tests and Criteria, Part IV 3 Terms and definitions The definitions of terms used in this document are taken as those given by the relevant regulations concerning the transport of dangerous goods unless otherwise stated. For the purposes of this document, the following additional terms and definitions apply. 3.1 capacity of shell or shell compartment for tanks the total inner volume of the shell or shell compartment expressed in litres or cubic metres. When it is not possible to completely fill the shell or the shell compartment because of its shape or construction, this reduced capacity shall be used for the determination of the degree of filling and for the marking of the tank 3.2 expert individual or body approved by the competent authority to perform designated inspections and tests Note 1 to entry: According to RID/ADR testing, inspection and certification duties are allocated to either the competent authority or to inspection bodies or experts approved by the competent authority. RID and ADR include detailed requirements on the qualification, obligations, accreditation and approval of these inspection bodies. 3.3 inspection body body approved by the competent authority to perform designated inspection and tests 3.4 protective lining or coating lining or coating protecting the metallic tank material against corrosion or reaction with the substances to be transported Note 1 to entry: This does not apply to lining or coating used only to protect the substance to be carried. 3.5 repair correction of a defect which may have impaired the safety of the tank or where equipment that communes directly with the shells content or safety device is replaced; it does not include normal service and maintenance operations of the shell or service equipment or replacement of gaskets or service equipment to the same specification. 3.6 technical code code or standard(s) according to which the tank has been designed and constructed 6
Dansk standard DS/EN ISO udgave Campingtelte. Camping tents
Dansk standard DS/EN ISO 5912 2. udgave 2011-11-22 Campingtelte Camping tents DS/EN ISO 5912 København DS projekt: M245636 ICS: 97.200.30 Første del af denne publikations betegnelse er: DS/EN ISO, hvilket
Læs mereTekniske specifikationer for centrifugalpumper Klasse III
Dansk standard Tillæg DS/EN ISO 9908/A1 1. udgave 2011-06-08 Tekniske specifikationer for centrifugalpumper Klasse III Technical specifications for centrifugal pumps Class III Amendment 1 DS/EN ISO 9908/A1
Læs mereKrydderier og smagsstoffer Botanisk nomenklatur
Dansk standard DS/EN ISO 676 1. udgave 2009-07-23 Krydderier og smagsstoffer Botanisk nomenklatur Spices and condiments Botanical nomenclature DS/EN ISO 676 København DS projekt: M230052 ICS: 01.040.67;
Læs mereKosmetik Metoder til prøvning af solbeskyttelse In vivo-bestemmelse af UVA-beskyttelse
Dansk standard DS/EN ISO 24442 1. udgave 2012-02-01 Kosmetik Metoder til prøvning af solbeskyttelse In vivo-bestemmelse af UVA-beskyttelse Cosmetics Sun protection test methods In vivo determination of
Læs merePapir og karton Bestemmelse af tykkelse, densitet og massevolumen
Dansk standard DS/EN ISO 534 1. udgave 2012-01-04 Papir og karton Bestemmelse af tykkelse, densitet og massevolumen Paper and board Determination of thickness, density and specific volume DS/EN ISO 534
Læs merePlast Bestemmelse af termoplasts massesmelteindeks (MFR) og volumensmelteindeks (MVR) Del 1: Standardmetode
Dansk standard DS/EN ISO 1133-1 1. udgave 2012-01-25 Plast Bestemmelse af termoplasts massesmelteindeks (MFR) og volumensmelteindeks (MVR) Del 1: Standardmetode Plastics Determination of the melt mass-flow
Læs merePulvermaling Del 7: Bestemmelse af massetab efter ophedning i ovn
Dansk standard DS/EN ISO 8130-7 1. udgave 2011-01-21 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 8130-7:2011 Pulvermaling Del 7: Bestemmelse af massetab efter ophedning
Læs mereMajs Bestemmelse af vandindhold (i forarbejdet korn og i hele korn)
Dansk standard DS/EN ISO 6540 1. udgave 2010-06-23 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 6540:2010 Majs Bestemmelse af vandindhold (i forarbejdet korn og i hele
Læs mereWc-kummer og wc-møbler Tilslutningsdimensioner
Dansk standard DS/EN 33 3. udgave 2011-10-03 Wc-kummer og wc-møbler Tilslutningsdimensioner WC pans and WC suites Connecting dimensions DS/EN 33 København DS projekt: M235262 ICS: 91.140.70 Første del
Læs mereMaintenance Documentation for maintenance
Dansk standard DS/EN 13460 3. udgave 2009-12-15 Vedligehold Dokumentation for vedligehold Maintenance Documentation for maintenance DS/EN 13460 København DS projekt: M245239 ICS: 01.110; 21.020 Første
Læs mereMiljøledelsessystemer Kravbeskrivelse med råd om anvendelse
Dansk standard DS/EN ISO 14001 2. udgave 2004-11-30 Miljøledelsessystemer Kravbeskrivelse med råd om anvendelse Environmental management systems Requirements with guidance for use DS/EN ISO 14001 København
Læs mereMalinger og lakker Belysning og procedure for visuel vurdering af belægninger
Dansk standard DS/EN ISO 13076 1. udgave 2012-08-10 Malinger og lakker Belysning og procedure for visuel vurdering af belægninger Paints and varnishes Lighting and procedure for visual assessments of coatings
Læs mereDansk standard DS/EN Loft ladders Requirements, marking and testing. 1. udgave
Dansk standard DS/EN 14975 1. udgave 2007-02-26 Loftstiger Krav, mærkning og prøvning Loft ladders Requirements, marking and testing DS/EN 14975 København DS projekt: 55746 ICS: 97.145 Første del af denne
Læs merePalmeolie Bestemmelse af indeks for forringelse af blegningsevne (DOBI) samt bestemmelse af karotinindhold
Dansk standard DS/EN ISO 17932 2. udgave 2011-11-07 Palmeolie Bestemmelse af indeks for forringelse af blegningsevne (DOBI) samt bestemmelse af karotinindhold Palm oil Determination of the deterioration
Læs mereBordtennis Del 2: Netstolper Krav og prøvningsmetoder
Dansk standard DS/EN 14468-2:2015 2. udgave 2015-04-29 Bordtennis Del 2: Netstolper Krav og prøvningsmetoder Table tennis Part 2: Posts for net assemblies Requirements and test methods DS/EN 14468-2:2015
Læs mereGeometriske produktspecifikationer (GPS) Længdemåleudstyr højdemålere Design og metrologiske karakteristika
Dansk standard DS/EN ISO 13225 1. udgave 2012-05-23 Geometriske produktspecifikationer (GPS) Længdemåleudstyr højdemålere Design og metrologiske karakteristika Geometrical product specifications (GPS)
Læs mereAkustik Støjreduktion Kabiner Laboratorie- og in situ-målinger
Dansk standard DS/EN ISO 11957 2. udgave 2009-09-22 Akustik Støjreduktion Kabiner Laboratorie- og in situ-målinger Acoustics Determination of sound insulation performance of cabins Laboratory and in situ
Læs merePackaging Flexible plastic/metal laminate tubes Dimensions and tolerances of nozzle S 13
Dansk standard DS/EN 14979 1. udgave 2006-03-31 Emballage Fleksible laminattuber af plast/metal Dimensioner og tolerancer for dyse S 13 Packaging Flexible plastic/metal laminate tubes Dimensions and tolerances
Læs mereEurocode 7: Geoteknik Del 1: Generelle regler
Dansk standard Tillæg DS/EN 1997-1/A1 1. udgave 2014-02-03 Eurocode 7: Geoteknik Del 1: Generelle regler Eurocode 7: Geotechnical design Part 1: General rules DS/EN 1997-1/A1 København DS projekt: M267839
Læs mereTeknisk tegning Flowdiagrammer til procesanlæg Generelle regler
Dansk Standard DS/EN ISO 10628 1. udgave Godkendelsesblad Godkendt:2001-04-06 Teknisk tegning Flowdiagrammer til procesanlæg Generelle regler Flow diagrams for process plants General rules DANSK STANDARD
Læs mereFritidsbåde Komfurer til flydende brændsel
Dansk standard DS/EN ISO 14895 1. udgave 2003-04-11 Fritidsbåde Komfurer til flydende brændsel Small craft Liquid-fuelled galley stoves DS/EN ISO 14895 København DS projekt: 47074 ICS: 47.080 Deskriptorer:
Læs mereCentrale strømforsyningssystemer
Dansk Standard DS/EN 50171 1. udgave 2001-08-29 Centrale strømforsyningssystemer Central power supply systems DS/EN 50171 København DS projekt: 30769 ICS: 29.200 Deskriptorer: belysning til nødudgang,elektriske
Læs mereMaskinsikkerhed Elektrisk udstyr på maskiner Del 1: Generelle krav
Dansk standard Tillæg DS/EN 60204-1/A1 1. udgave 2009-03-13 Maskinsikkerhed Elektrisk udstyr på maskiner Del 1: Generelle krav Safety of machinery Electrical equipment of machines Part 1: General requirements
Læs mereSpecifikation og kvalificering af svejseprocedurer for metalliske materialer Kvalificering ved godkendelse af en standardsvejseprocedure
Dansk standard DS/EN ISO 15612 2. udgave 2005-12-22 Specifikation og kvalificering af svejseprocedurer for metalliske materialer Kvalificering ved godkendelse af en standardsvejseprocedure Specification
Læs mereIntegration af virksomhedens styringssystem Del 1: Modeller og terminologi
Dansk standard DS/EN 62264-1 1. udgave 2008-02-01 Integration af virksomhedens styringssystem Del 1: Modeller og terminologi Enterprise-control system integration DS/EN 62264-1 København DS projekt: M222179
Læs mereGasfyrede tørretumblere af type B med en nominel belastning, der ikke overstiger 20 kw Del 2: Rationel energiudnyttelse
Dansk Standard DS/EN 12752-2 2. udgave 2001-11-09 Gasfyrede tørretumblere af type B med en nominel belastning, der ikke overstiger 20 kw Del 2: Rationel energiudnyttelse Gas-fired tumble dryers of type
Læs mereDansk standard DS/EN Risk management Risk assessment techniques. 1. udgave
Dansk standard DS/EN 31010 1. udgave 2010-05-20 Risikoledelse Teknikker til risikovurdering Risk management Risk assessment techniques DS/EN 31010 København DS projekt: M231261 ICS: 03.100.01 Første del
Læs mereSlanger og rør af gummi og plast Måling af fleksibilitet og stivhed Del 2: Bøjeprøvning ved lavere temperaturer end rumtemperatur
Dansk standard DS/EN ISO 10619-2 1. udgave 2012-01-24 Slanger og rør af gummi og plast Måling af fleksibilitet og stivhed Del 2: Bøjeprøvning ved lavere temperaturer end rumtemperatur Rubber and plastics
Læs mereHalvlederelementer Mekaniske og klimatiske prøvningsmetoder Del 33: Accelereret fugtbestandighed Objektiv autoklav
Dansk standard DS/EN 60749-33 1. udgave 2004-04-29 Halvlederelementer Mekaniske og klimatiske prøvningsmetoder Del 33: Accelereret fugtbestandighed Objektiv autoklav Semiconductor devices Mechanical and
Læs mereRotordynamiske pumper Godkendelsesprøvning af hydraulisk ydeevne Klasse 1, 2 og 3
Dansk standard DS/EN ISO 9906 2. udgave 2012-06-08 Rotordynamiske pumper Godkendelsesprøvning af hydraulisk ydeevne Klasse 1, 2 og 3 Rotodynamic pumps Hydraulic performance acceptance tests Grades 1, 2
Læs mereGødning Ekstraktion af vandopløseligt calcium, magnesium, natrium og svovl i form af sulfat
Dansk standard DS/EN 15961 1. udgave 2012-01-06 Gødning Ekstraktion af vandopløseligt calcium, magnesium, natrium og svovl i form af sulfat Fertilizers Extraction of water-soluble calcium, magnesium, sodium
Læs mereDansk standard DS/EN 13429. Packaging Reuse. 3. udgave 2006-10-12
Dansk standard DS/EN 13429 3. udgave 2006-10-12 Emballage Genbrug Packaging Reuse DS/EN 13429 København DS projekt: M215981 ICS: 13.030.50; 55.020 Første del af denne publikations betegnelse er: DS/EN,
Læs mereMultimedia quality Method of assessment of synchronization of audio and video
Dansk standard DS/EN 62503 1. udgave 2008-10-31 Multimediekvalitet Metode til fastsættelse af synkronisering mellem lyd og billede Multimedia quality Method of assessment of synchronization of audio and
Læs mereCold rolled narrow steel strip Tolerances on dimensions and shape
Dansk standard DS/EN 10140 3. udgave 2009-06-02 Koldvalset båndstål Tolerancer for dimensioner og form Cold rolled narrow steel strip Tolerances on dimensions and shape DS/EN 10140 København DS projekt:
Læs mereSteel castings Austenitic manganese steel castings
Dansk standard DS/EN 10349 1. udgave 2009-11-05 Stålstøbegods Austenitisk manganstålstøbegods Steel castings Austenitic manganese steel castings DS/EN 10349 København DS projekt: M220956 ICS: 77.140.80
Læs mereElektrostatik Del 4-1: Standardprøvningsmetoder. anvendelser Gulvbelægningers og monterede gulves elektrostatiske egenskaber
Dansk standard Tillæg DS/EN 61340-4-1:2004/A1:2015 1. udgave 2015-06-23 Elektrostatik Del 4-1: Standardprøvningsmetoder for specifikke anvendelser Gulvbelægningers og monterede gulves elektrostatiske egenskaber
Læs mereVinduer og døre Vandtæthed Klassifikation
Dansk Standard DS/EN 12208 1. udgave Godkendt:2000-12-29 Vinduer og døre Vandtæthed Klassifikation Windows and doors Watertightness Classification DANSK STANDARD - Eftertryk uden tilladelse forbudt Kollegievej
Læs mereSvejsekoordination Opgaver og ansvarsforhold
Dansk standard DS/EN ISO 14731 1. udgave 2006-11-06 Svejsekoordination Opgaver og ansvarsforhold Welding coordination Tasks and responsibilities DS/EN ISO 14731:2006 København DS projekt: 55660 ICS: 25.160.01
Læs mereLampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler
Dansk standard Tillæg DS/EN 60061-1/A41 (elektronisk) 1. udgave 2010-06-24 Lampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler Lamp caps and holders together
Læs mereDansk standard DS/EN Weibull analysis. 1. udgave
Dansk standard DS/EN 61649 1. udgave 2008-12-10 Weilbull-analyse Weibull analysis DS/EN 61649 København DS projekt: M219606 ICS: 03.120.30 Første del af denne publikations betegnelse er: DS/EN, hvilket
Læs mereVeksellad Ikke-stabelbare veksellad klasse C Dimensioner og generelle krav
Dansk standard DS/EN 284 2. udgave 2007-04-27 Veksellad Ikke-stabelbare veksellad klasse C Dimensioner og generelle krav Swap bodies Non-stackable swap bodies of class C Dimensions and general requirements
Læs mereBatchstyring Del 1: Modeller og terminologi
Dansk Standard DS/EN 61512-1 1. udgave 2001-08-29 Batchstyring Del 1: Modeller og terminologi Batch control Part 1: Models and terminology DS/EN 61512-1 København DS projekt: 26009 ICS: 25.040.40 Deskriptorer:
Læs mereTilsatsmaterialer til svejsning Pulverfyldte elektroder til metallysbuesvejsning
Dansk standard DS/EN ISO 12153 1. udgave 2012-06-08 Tilsatsmaterialer til svejsning Pulverfyldte elektroder til metallysbuesvejsning med eller uden beskyttelsesgas af nikkel og nikkellegeringer Klassifikation
Læs mereStørrelser og enheder Del 13: Informationsvidenskab og -teknologi
Dansk standard DS/EN 80000-13 1. udgave 2008-08-22 Størrelser og enheder Del 13: Informationsvidenskab og -teknologi Quantities and units Part 13: Information science and technology DS/EN 80000-13 København
Læs mereStyring af rumfartsprojekter. Generelle krav. Del 1: Politik og principper
Dansk Standard DS/EN 13290-1 1. udgave Godkendt:2000-04-13 Styring af rumfartsprojekter. Generelle krav. Del 1: Politik og principper Space project management - General requirements - Part 1: Policy and
Læs mereMøbler til udendørs brug Siddemøbler og borde til camping, privat og offentlig brug Del 1: Generelle sikkerhedskrav
Dansk standard DS/EN 581-1 2. udgave 2006-04-19 Møbler til udendørs brug Siddemøbler og borde til camping, privat og offentlig brug Del 1: Generelle sikkerhedskrav Outdoor furniture Seating and tables
Læs mereLampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler
Dansk standard Tillæg DS/EN 60061-1/A47 (elektronisk) 1. udgave 2012-04-23 Lampesokler og fatninger samt prøvelærer til kontrol af udskiftelighed og sikkerhed Del 1: Lampesokler Lamp caps and holders together
Læs mereTandpleje Manuelle tandbørster Generelle krav og prøvningsmetoder
Dansk standard DS/EN ISO 20126 2. udgave 2012-04-18 Tandpleje Manuelle tandbørster Generelle krav og prøvningsmetoder Dentistry Manual toothbrushes General requirements and test methods DS/EN ISO 20126
Læs mereElastiske gulvbelægninger Halvfleksible pvc-fliser Specifikation
Dansk standard DS/EN 654 3. udgave 2011-06-14 Elastiske gulvbelægninger Halvfleksible pvc-fliser Specifikation Resilient floor coverings Semi-flexible polyvinyl chloride tiles Specification DS/EN 654 København
Læs mereFysiske størrelser og enheder Del 14: Telebiometri relateret til human fysiologi
Dansk standard DS/EN 80000-14 1. udgave 2009-05-27 Fysiske størrelser og enheder Del 14: Telebiometri relateret til human fysiologi Quantities and units Part 14: Telebiometrics related to human physiology
Læs mereTemperature Electromotive force (EMF) tables for pure-element thermocouple combinations
Dansk standard DS/EN 62460 1. udgave 2008-10-14 Temperatur Elektromotorisk kraft (EMF) Tabeller for kombinationer af rene termoelementer Temperature Electromotive force (EMF) tables for pure-element thermocouple
Læs mereFødevarer Bestemmelse af C-vitamin ved hjælp af HPLC
Dansk standard DS/EN 14130 1. udgave 2003-07-15 Fødevarer Bestemmelse af C-vitamin ved hjælp af HPLC Foodstuffs Determination of vitamin C by HPLC DS/EN 14130 København DS projekt: 46748 ICS: 67.050 Deskriptorer:
Læs mereAkustik Deklarering og verificering af støj fra maskiner og udstyr
Dansk standard DS/EN ISO 4871 2. udgave 2009-09-09 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 4871:2009 Akustik Deklarering og verificering af støj fra maskiner og udstyr
Læs mereFaste modstande til brug i elektronisk udstyr Del 1: Generisk specifikation
Dansk standard Tillæg DS/EN 60115-1:2011/ A11:2015 1. udgave 2015-05-18 Faste modstande til brug i elektronisk udstyr Del 1: Generisk specifikation Fixed resistors for use in electronic equipment Part
Læs merePackaging Requirements for the use of European Standards in the field of packaging and packaging waste
Dansk standard DS/EN 13427 3. udgave 2006-10-12 Emballage Krav til anvendelsen af europæiske standarder for emballage og emballageaffald Packaging Requirements for the use of European Standards in the
Læs merePrøvningsmetoder til hjælpekomponenter til murværk Del 4: Bestemmelse af lastkapacitet og lastnedbøjning i bjælkesko
Dansk standard DS/EN 846-4 + A1 2. udgave 2002-12-04 Prøvningsmetoder til hjælpekomponenter til murværk Del 4: Bestemmelse af lastkapacitet og lastnedbøjning i bjælkesko Methods of test for ancillary components
Læs mereDansk Standard DS/EN udgave. Flymateriel
Dansk Standard DS/EN 3961 1. udgave Godkendt:2001-07-11 Flymateriel Aerospace series Gold base alloy AU-B40001 Filler metal for brazing-rolled foil DANSK STANDARD - Eftertryk uden tilladelse forbudt Kollegievej
Læs mereMobil og bærbar DVB-T/H-radiotilslutning Del 2: Grænsefladeoverensstemmelsesprøvning
Dansk standard DS/EN 62002-2 1. udgave 2006-12-12 Mobil og bærbar DVB-T/H-radiotilslutning Del 2: Grænsefladeoverensstemmelsesprøvning Mobile and portable DVB-T/H radio access Part 2: Interface conformance
Læs mereLegepladsredskaber og -underlag Del 11: Tredimensionelle klatrenet Supplerende specifikke sikkerhedskrav og prøvningsmetoder
Dansk standard DS/EN 1176-11 2. udgave 2009-04-22 Legepladsredskaber og -underlag Del 11: Tredimensionelle klatrenet Supplerende specifikke sikkerhedskrav og prøvningsmetoder Playground equipment and surfacing
Læs mereJernbaneudstyr Svejsning af jernbanekøretøjer og -komponenter Del 4: Produktionskrav
Dansk standard DS/EN 15085-4 1. udgave 2007-11-06 Jernbaneudstyr Svejsning af jernbanekøretøjer og -komponenter Del 4: Produktionskrav Railway applications - Welding of railway vehicles and components
Læs mereIkke-destruktiv prøvning Lækprøvning Kriterier for valg af metode og teknik
Dansk Standard DS/EN 1779 2. udgave 2001-10-26 Ikke-destruktiv prøvning Lækprøvning Kriterier for valg af metode og teknik Non-destructive testing Leak testing Criteria for method and technique selection
Læs mereJernbaneudstyr Svejsning af jernbanekøretøjer og -komponenter Del 2: Kvalitetskrav og certificering af fabrikanten
Dansk standard DS/EN 15085-2 1. udgave 2007-11-06 Jernbaneudstyr Svejsning af jernbanekøretøjer og -komponenter Del 2: Kvalitetskrav og certificering af fabrikanten Railway applications Welding of railway
Læs mereControl technology Rules for the designation of measuring instruments
Dansk standard DS/EN 62419 1. udgave 2009-03-10 Styringsteknologi Regler for benævnelse af måleinstrumenter Control technology Rules for the designation of measuring instruments DS/EN 62419 København DS
Læs mereKøkkengrej Grafiske symboler (piktogrammer)
Dansk standard DS/EN 14916 1. udgave 2005-11-14 Køkkengrej Grafiske symboler (piktogrammer) Domestic cookware Graphical symbols (pictograms) DS/EN 14916 København DS projekt: 55114 ICS: 01.080.20; 97.040.60
Læs mereKapslingsklasser (IP-kode)
Dansk Standard DS/EN 60529+A1 1. udgave 2002-04-05 Kapslingsklasser (IP-kode) Degrees of protection provided by enclosures (IP Code) DS/EN 60529+A1 København DS projekt: 47050 ICS: 29.020 Deskriptorer:
Læs mereEmballage Glasemballage Dybe BVS-lukninger til ikke-mousserende vine
Dansk standard DS/EN 16293 1. udgave 2013-04-03 Emballage Glasemballage Dybe BVS-lukninger til ikke-mousserende vine Packaging Glass Packaging Deep BVS finishes for still wines DS/EN 16293 København DS
Læs mereElproducerende vindmøller Del 25-3: Kommunikationssystemer til overvågning og styring af vindmølleparker Modeller for informationsudveksling
Dansk standard DS/EN 61400-25-3 1. udgave 2007-04-27 Elproducerende vindmøller Del 25-3: Kommunikationssystemer til overvågning og styring af vindmølleparker Modeller for informationsudveksling Wind turbines
Læs mereSuperledning Del 10: Måling af kritisk temperatur Kritisk temperatur for sammensatte superledere målt ved en modstandsmetode
Dansk standard DS/EN 61788-10 2. udgave 2006-12-11 Superledning Del 10: Måling af kritisk temperatur Kritisk temperatur for sammensatte superledere målt ved en modstandsmetode Superconductivity Part 10:
Læs mereDansk standard DS/EN 13590
Dansk standard DS/EN 13590 1. udgave 2003-06-30 Emballage Bæreposer af fleksibelt materiale til transport af dagligvarer Generelle egenskaber og prøvningsmetoder til bestemmelse af volumen og bæreevne
Læs mereGlasfiberarmeret plast Bestemmelse af hårdhed ved hjælp af Barcol-hårdhedsmåler
Dansk standard DS/EN 59:2016 2. udgave 2016-02-26 Glasfiberarmeret plast Bestemmelse af hårdhed ved hjælp af Barcol-hårdhedsmåler Glass reinforced plastics Determination of indentation hardness by means
Læs mereSkovbrugs- og havebrugsmaskiner Vibrationsprøvning af bærbare håndholdte maskiner med forbrændingsmotor Vibrationer ved håndtagene
Dansk standard DS/EN ISO 22867 3. udgave 2012-01-25 Skovbrugs- og havebrugsmaskiner Vibrationsprøvning af bærbare håndholdte maskiner med forbrændingsmotor Vibrationer ved håndtagene Forestry and gardening
Læs mereAustenitiske, austenitisk-ferritiske og ferritiske langssvejste rustfrie stålrør til fødevareindustri og kemisk industri
Dansk standard DS/EN 10357 1. udgave 2014-01-09 Austenitiske, austenitisk-ferritiske og ferritiske langssvejste rustfrie stålrør til fødevareindustri og kemisk industri Austenitic, austenitic-ferritic
Læs mereThermal spraying Acceptance inspection of thermal spraying equipment Part 2: Flame spraying including HVOF
Dansk standard DS/EN 1395-2 1. udgave 2007-02-27 Termisk sprøjtning Godkendelsesinspektion af termisk sprøjteudstyr Del 2: Flammesprøjtning inklusive HVOF Thermal spraying Acceptance inspection of thermal
Læs mereGrænseflade for digital lyd Del 1: Generelt
Dansk standard Tillæg DS/EN 60958-1/A1 1. udgave 2014-09-02 Grænseflade for digital lyd Del 1: Generelt Digital audio interface Part 1: General DS/EN 60958-1/A1 København DS projekt: M277911 ICS: 33.160.30
Læs mereFugtindhold af et stykke savet træ Del 2: Vurdering ved elektrisk modstandsmetode
Dansk Standard DS/EN 13183-2 1. udgave 2002-04-30 Fugtindhold af et stykke savet træ Del 2: Vurdering ved elektrisk modstandsmetode Moisture content of a piece of sawn timber Part 2: Estimation by electrical
Læs mereMiljømærkning Egendeklaration af miljøpåstande (Type II miljømærkning)
Dansk standard Tillæg DS/EN ISO 14021/A1 1. udgave 2012-02-08 Miljømærkning Egendeklaration af miljøpåstande (Type II miljømærkning) Environmental labels and declarations Self-declared environmental claims
Læs mereGrænseflade for digital lyd Del 1: Generelt
Dansk standard DS/EN 60958-1 3. udgave 2008-10-31 Grænseflade for digital lyd Del 1: Generelt Digital audio interface Part 1: General DS/EN 60958-1 København DS projekt: M222433 ICS: 33.160.30 Første del
Læs mereBitumen and bituminous binders Determination of the tensile properties of modified bitumen by the force ductility method
Dansk standard DS/EN 13589 2. udgave 2008-05-23 Bitumen og bituminøse bindemidler Bestemmelse af modificeret bitumens trækstyrke ved hjælp af "force ductility" Bitumen and bituminous binders Determination
Læs mereVentilation i bygninger Symboler, terminologi og grafiske symboler
Dansk standard DS/EN 12792 1. udgave 2003-12-17 Ventilation i bygninger Symboler, terminologi og grafiske symboler Ventilation for buildings Symbols, terminology and graphical symbols DS/EN 12792 København
Læs mereKontormøbler Kontorstole Del 1: Mål Bestemmelse af dimensioner
Dansk Standard DS/EN 1335-1 2. udgave Godkendt: 2001-02-21 Kontormøbler Kontorstole Del 1: Mål Bestemmelse af dimensioner Office furniture Office work chair Part 1: Dimensions Determination of dimensions
Læs mereKarakteristikker af DAB-modtagere
Dansk Standard DS/EN 50248 2. udgave 2001-12-11 Karakteristikker af DAB-modtagere Characteristics of DAB receivers DS/EN 50248 København DS projekt: 42051 ICS: 33.160.20 33.160.25 Deskriptorer: lydudsendelse,tv-udsendelse,satellit-udsendelse,digitale
Læs mereUdstyr til tilslutning af belysningsarmaturer til husholdningsbrug o.l. Del 2: Normblade for DCL
Dansk standard DS/EN 61995-2 1. udgave 2009-06-10 Udstyr til tilslutning af belysningsarmaturer til husholdningsbrug o.l. Del 2: Normblade for DCL Devices for the connection of luminaires for household
Læs mereTrækonstruktioner Bestemmelse af dyblers brudmoment
Dansk standard DS/EN 409 2. udgave 2009-06-24 Trækonstruktioner Bestemmelse af dyblers brudmoment Timber structures Test methods Determination of the yield moment of dowel type fasteners DS/EN 409 København
Læs mereFOR COMMERCIAL USE OR REPRODUCTION. DS/EN
Dansk standard DS/EN 4697 1. udgave 2012-06-06 Flymateriel Aerospace series General and installation requirements for passenger seat fittings DS/EN 4697 København DS projekt: M260305 ICS: 49.095 Første
Læs mereLedelse af pålidelighedsaktiviteter Del 3-11: Anvendelsesvejledning Pålidelighedscentreret vedligehold (RCM)
Dansk standard DS/EN 60300-3-11 1. udgave 2009-12-10 Ledelse af pålidelighedsaktiviteter Del 3-11: Anvendelsesvejledning Pålidelighedscentreret vedligehold (RCM) Dependability management Part 3-11: Application
Læs mereHeating boilers Electrical power consumption for heat generators System boundaries Measurements
Dansk standard DS/EN 15456 1. udgave 2008-05-13 Varmekedler Varmegeneratorers elforbrug Systemafgrænsning Målinger Heating boilers Electrical power consumption for heat generators System boundaries Measurements
Læs mereCOPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 8501-4:2007#
Dansk standard DS/EN ISO 8501-4 1. udgave 2007-01-29 Forbehandling af ståloverflader før påføring af maling og lignende produkter Visuel vurdering af overfladens renhed Del 4: Karakterisering af overfladens
Læs mereVarmvalsede stålplader med en tykkelse på 3 mm eller mere Dimensions- og formtolerancer
Dansk standard DS/EN 10029 2. udgave 2010-12-14 Varmvalsede stålplader med en tykkelse på 3 mm eller mere Dimensions- og formtolerancer Hot-rolled steel plates 3 mm thick or above Tolerances on dimensions
Læs mereIkke-destruktiv prøvning Penetrantog magnetpulverprøvning ved brug af blåt lys
DS-information DS/CEN/TR 16638 1. udgave 2014-02-26 Ikke-destruktiv prøvning Penetrantog magnetpulverprøvning ved brug af blåt lys Non-destructive testing Penetrant and magnetic particle testing using
Læs mereAudioudstyr og audiovisuelt udstyr Digitale audiodele Grundlæggende metoder til måling af audiokarakteristika Del 4: Personlig computer
Dansk standard DS/EN 61606-4 1. udgave 2007-02-08 Audioudstyr og audiovisuelt udstyr Digitale audiodele Grundlæggende metoder til måling af audiokarakteristika Del 4: Personlig computer Audio and audiovisual
Læs mereEnergiledelsessystemets grænseflade til applikationsprogrammer (EMS-API) Del 453: CIM-baseret grafisk udveksling
Dansk standard DS/EN 61970-453 1. udgave 2008-09-26 Energiledelsessystemets grænseflade til applikationsprogrammer (EMS-API) Del 453: CIM-baseret grafisk udveksling Energy management system application
Læs mereUdstyr til vintertjeneste Snerydningsmaskiner med roterende værktøj Specifikation og rydningskapacitet
Dansk standard DS/EN 15906 1. udgave 2012-01-10 Udstyr til vintertjeneste Snerydningsmaskiner med roterende værktøj Specifikation og rydningskapacitet Winter maintenance equipment Snow removal machines
Læs mereSolcelleanlæg Termer, definitioner og symboler
DS-information DS/CLC/TS 61836 1. udgave 2009-06-26 Solcelleanlæg Termer, definitioner og symboler Solar photovoltaic energy systems Terms, definitions and symbols DS/CLC/TS 61836 København DS projekt:
Læs mereFacility Management Del 2: Vejledning i udarbejdelse af Facility Management-aftaler
Dansk standard DS/EN 15221-2 2. udgave 2008-06-30 Facility Management Del 2: Vejledning i udarbejdelse af Facility Management-aftaler Facility Management Part 2: Guidance on how to prepare Facility Management
Læs merePipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems Part 2: System S; dimensions
Dansk standard DS/EN 1124-2 1. udgave 2008-03-04 Rør og fittings af længdesvejste rustfrie stålrør med spidsende og muffe til afløbssystemer Del 2: System S, dimensioner Pipes and fittings of longitudinally
Læs mereLiming materials Determination of the breakdown of granulated calcium and calcium/magnesium carbonates under the influence of water
Dansk standard DS/EN 15704 1. udgave 2009-01-23 Jordbrugskalk Bestemmelse af nedbrydning af granuleret calcium- og calcium/magnesiumcarbonater påvirket af vand Liming materials Determination of the breakdown
Læs mereAluminium og aluminiumlegeringer Rondeller og rondelmaterialer til produktion af køkkenredskaber Specifikationer
Dansk standard DS/EN 851 2. udgave 2014-07-14 Aluminium og aluminiumlegeringer Rondeller og rondelmaterialer til produktion af køkkenredskaber Specifikationer Aluminium and aluminium alloys Circle and
Læs mereEurocode 1: Last på bærende konstruktioner Del 1-3: Generelle laster Snelast
Dansk standard DS/EN 1991-1-3 2. udgave 2007-06-22 Eurocode 1: Last på bærende konstruktioner Del 1-3: Generelle laster Snelast Eurocode 1 Actions on structures Part 1-3: General actions - Snow loads DS/EN
Læs mere