Dansk standard DS/EN 846-9 2. udgave 2002-12-04 Prøvningsmetoder til hjælpekomponenter til murværk Del 9: Bestemmelse af bøjningsmodstand og forskydningsmodstand i overliggere Methods of test for ancillary components for masonry Part 9: Determination of flexural resistance and shear resistance of lintels
DS/EN 846-9 København DS projekt: 51596 ICS: 91.080.30 Deskriptorer: bøjningspåvirkning,murværk,komponenter,konstruktion,bestemmelse,overliggere,mekanisk prøvning,modstand,stivhed, materialestyrke,prøvning Første del af denne publikations betegnelse er: DS/EN, hvilket betyder, at det er en europæisk standard, der har status som dansk standard. Denne publikations overensstemmelse er: IDT med: EN 846-9:2000. DS-publikationen er på dansk og engelsk. Denne publikation erstatter: DS/EN 846-9:2000 Publikationen forelå kun i engelsksproget version. Der er ikke foretaget ændringer i denne nye udgave, ud over at den danske oversættelse er indføjet. I tilfælde af tvivl om den danske oversættelses korrekthed henvises til den engelske version. DS-publikationstyper Dansk Standard udgiver forskellige publikationstyper. Typen på denne publikation fremgår af forsiden. Der kan være tale om: Dansk standard standard, der er udarbejdet på nationalt niveau eller er baseret på et andet lands nationale standard, eller standard, der er udarbejdet på internationalt og/eller europæisk niveau og har fået status som dansk standard DS-information publikation, der er udarbejdet på nationalt niveau og ikke har opnået status som standard, eller publikation, der er udarbejdet på internationalt og/eller europæisk niveau og ikke har fået status som standard, fx en teknisk rapport, eller europæisk præstandard DS-håndbog samling af standarder, eventuelt suppleret med informativt materiale DS-hæfte publikation med informativt materiale Til disse publikationstyper kan endvidere udgives tillæg og rettelsesblade DS-publikationsform Publikationstyperne udgives i forskellig form som henholdsvis fuldtekstpublikation (publikationen er trykt i sin helhed) godkendelsesblad (publikationen leveres i kopi med et trykt DS-omslag) elektronisk (publikationen leveres på et elektronisk medie) DS-betegnelse Alle DS-publikationers betegnelse begynder med DS efterfulgt af et eller flere præfikser og et nr. fx DS 383, DS/EN 5414 osv. Hvis der efter nr. er angivet et A eller Cor, betyder det, enten at det er et tillæg eller et rettelsesblad til hovedstandarden, eller at det er indført i hovedstandarden. DS-betegnelse angives på forsiden. Overensstemmelse med anden publikation: Overensstemmelse kan enten være IDT, EQV, NEQ eller MOD IDT: Når publikationen er identisk med en given publikation. EQV: Når publikationen teknisk er i overensstemmelse med en given publikation, men præsentationen er ændret. NEQ: Når publikationen teknisk eller præsentationsmæssigt ikke er i overensstemmelse med en given standard, men udarbejdet på baggrund af denne. MOD: Når publikationen er modificeret i forhold til en given publikation.
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 846-9 February 2000 ICS 91.060.10; 91.080.30 English version Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels Méthodes d'essai des composants accessoires de maçonnerie - Partie 9: Détermination de la résistance à la flexion et de la résistance au cisaillement des linteaux This European Standard was approved by CEN on 4 December 1999. Prüfverfahren für Ergänzungsbauteile für Mauerwerk - Teil 9: Bestimmung der Biege- und Schubwiderstandsfähigkeit von Stürzen CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Central Secretariat: rue de Stassart, 36 B-1050 Brussels 2000 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 846-9:2000 E
Page 2 EN 846-9:2000 Contents Page Foreword... 3 1 Scope... 4 2 Normative references... 4 3 Principle... 4 4 Symbols... 4 5 Materials... 4 6 Apparatus... 5 7 Sampling... 5 8 Procedure... 5 9 Expression of results... 7 10 Evaluation of results... 7 11 Test report... 8
DS/EN 846-9:2002 Indhold Forord.................................................................................................. 3 1 Emne og anvendelsesområde......................................................................... 4 2 Normative referencer................................................................................. 4 3 Princip............................................................................................... 4 4 Symboler............................................................................................ 4 5 Materialer............................................................................................ 4 6 Apparatur............................................................................................ 5 7 Prøveudtagning...................................................................................... 5 8 Fremgangsmåde ved prøvning........................................................................ 5 9 Angivelse af resultater................................................................................. 7 10 Vurdering af resultater................................................................................. 7 11 Prøvningsrapport..................................................................................... 8 2 (da)
Page 3 EN 846-9:2000 Foreword This European Standard has been prepared by Technical Committee CEN/TC 125 "Masonry", the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2000, and conflicting national standards shall be withdrawn at the latest by September 2000. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. This European standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association and supports the essential requirements of the EU Construction Products Directive (89/106/EEC) and includes the performance requirements referred to in the Eurocode for masonry Structures.
DS/EN 846-9:2002 Forord Denne europæiske standard er udarbejdet af teknisk komité CEN/TC 125, Masonry, der har engelsk sekretariat (BSI). Denne europæiske standard skal inden august 2000 have status som national standard, enten ved at der udgives en identisk tekst eller ved formel godkendelse, og modstridende nationale standarder skal være trukket tilbage senest september 2000. I henhold til CEN/CENELEC s interne regler er de nationale standardiseringsorganisationer i følgende lande forpligtet til at implementere denne europæiske standard: Belgien, Danmark, Finland, Frankrig, Grækenland, Holland, Irland, Island, Italien, Luxembourg, Norge, Portugal, Schweiz, Spanien, Storbritannien, Sverige, Tjekkiet, Tyskland og Østrig. Denne europæiske standard er udarbejdet af CEN i henhold til mandat fra Europa-Kommissionen og EFTA, og den underbygger de væsentlige krav i Byggevaredirektivet (89/106/EØF) og indeholder de krav til ydeevne, der er angivet i Eurocode 6 for murværkskonstruktioner. 3 (da)
Page 4 EN 846-9:2000 1 Scope This European Standard specifies methods for determining the flexural and shear resistances and load deflection characteristics of single span, single or composite lintels used for supporting uniformly distributed loads over openings in masonry construction. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. pren 772-1 pren 998-2 pren 1015-11 pren 845-2 3 Principle Methods of test for masonry units - Part 1 : Determination of compressive strength Specification for mortar for masonry - Part 2 : Masonry mortar Methods of test for mortar for masonry - Part 11 : Determination of flexural and compressive strength of hardened mortar Specification for ancillary components for masonry - Part 2 : Lintels Specimen lintels are simply supported and subjected to vertically applied loads in order to determine flexural strength, shear resistance and deflection. 4 Symbols L e W t B D c 5 Materials is the effective length (or span), (mm) is the applied load, (N) is the thickness of supported wall, (mm) is the length of bearing, (mm) is the total height of a composite lintel over both tension and compression elements, (mm) 5.1 Structural shell casing units Structural shell casing units shall be in accordance with pren 845-2.