Dansk standard DS/EN 60044-8 1. udgave 2002-10-24 Instrumenttransformere Del 8: Elektroniske strømtransformere Instrument transformers - Part 8: Electronic current transformers
DS/EN 60044-8 København DS projekt: 44245 ICS: 17.220.20 Deskriptorer: strømtransformere,definition,instrumenttransformere,specifikation,transformere Første del af denne publikations betegnelse er: DS/EN, hvilket betyder, at det er en europæisk standard, der har status som dansk standard. Denne publikations overensstemmelse er: IDT med: IEC 60044-8:2002 og IDT med: EN 60044-8:2002. DS-publikationen er på engelsk. DS-publikationstyper Dansk Standard udgiver forskellige publikationstyper. Typen på denne publikation fremgår af forsiden. Der kan være tale om: Dansk standard standard, der er udarbejdet på nationalt niveau eller er baseret på et andet lands nationale standard, eller standard, der er udarbejdet på internationalt og/eller europæisk niveau og har fået status som dansk standard DS-information publikation, der er udarbejdet på nationalt niveau og ikke har opnået status som standard, eller publikation, der er udarbejdet på internationalt og/eller europæisk niveau og ikke har fået status som standard, fx en teknisk rapport, eller europæisk præstandard DS-håndbog samling af standarder, eventuelt suppleret med informativt materiale DS-hæfte publikation med informativt materiale Til disse publikationstyper kan endvidere udgives tillæg og rettelsesblade DS-publikationsform Publikationstyperne udgives i forskellig form som henholdsvis fuldtekstpublikation (publikationen er trykt i sin helhed) godkendelsesblad (publikationen leveres i kopi med et trykt DS-omslag) elektronisk (publikationen leveres på et elektronisk medie) DS-betegnelse Alle DS-publikationers betegnelse begynder med DS efterfulgt af et eller flere præfikser og et nr. fx DS 383, DS/EN 5414 osv. Hvis der efter nr. er angivet et A eller Cor, betyder det, enten at det er et tillæg eller et rettelsesblad til hovedstandarden, eller at det er indført i hovedstandarden. DS-betegnelse angives på forsiden. Overensstemmelse med anden publikation: Overensstemmelse kan enten være IDT, EQV, NEQ eller MOD IDT: Når publikationen er identisk med en given publikation. EQV: Når publikationen teknisk er i overensstemmelse med en given publikation, men præsentationen er ændret. NEQ: Når publikationen teknisk eller præsentationsmæssigt ikke er i overensstemmelse med en given standard, men udarbejdet på baggrund af denne. MOD: Når publikationen er modificeret i forhold til en given publikation.
EUROPEAN STANDARD EN 60044-8 NORME EUROPÉENNE EUROPÄISCHE NORM September 2002 ICS 17.220.20 English version Transformateurs de mesure Partie 8: Transformateurs de courant électroniques (CEI 60044-8:2002) Instrument transformers Part 8: Electronic current transformers (IEC 60044-8:2002) Messwandler Teil 8: Elektronische Stromwandler (IEC 60044-8:2002) This European Standard was approved by CENELEC on 2002-09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60044-8:2002 E
EN 60044-8:2002-2 - Foreword The text of document 38/280/FDIS, future edition 1 of IEC 60044-8, prepared by IEC TC 38, Instrument transformers, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60044-8 on 2002-09-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2003-06-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2005-09-01 Annexes designated "normative" are part of the body of the standard. Annexes designated "informative" are given for information only. In this standard, annexes D and ZA are normative and annexes A, B, C and E are informative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard IEC 60044-8:2002 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60038 NOTE Harmonized as HD 472 S1:1989 (modified). IEC 60068-2 Series NOTE Harmonized in EN 60068-2/HD 323.2 Series (not modified). IEC 60071-2 NOTE Harmonized as EN 60071-2:1997 (not modified). IEC 60255-24 NOTE Harmonized as EN 60255-24:2001 (not modified). IEC 60270 NOTE Harmonized as EN 60270:2001 (not modified). IEC 60437 NOTE Harmonized as EN 60437:1997 (not modified). IEC 60567 NOTE Harmonized as EN 60567:1992 (not modified). IEC 60599 NOTE EN 60599:1999 is based on IEC 60599:1999 (not modified). IEC 60721-2-2 NOTE Harmonized as HD 478.2.2 S1:1990 (not modified). IEC 60721-2-4 NOTE Harmonized as HD 478.2.4 S1:1989 (not modified). IEC 61508-1 NOTE Harmonized as EN 61508-1:2001 (not modified). IEC 61508-3 NOTE Harmonized as EN 61508-3:2001 (not modified). IEC 61754-1 NOTE Harmonized as EN 61754-1:1997 (not modified). IEC 61754-15 NOTE Harmonized as EN 61754-15:2001 (not modified).
- 3 - EN 60044-8:2002 Annex ZA (normative) Normative references to international publications with their corresponding European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60028 1925 International standard of resistance for copper IEC 60044-1 - 1) Instrument transformers Part 1: Current transformers IEC 60044-6 - 1) Part 6: Requirements for protective current transformers for transient performance EN 60044-1 1999 2) EN 60044-6 1999 2) IEC 60044-7 - 1) Part 7: Electronic voltage transformers EN 60044-7 2000 2) IEC 60050-161 1990 International Electrotechnical Vocabulary (IEV) Chapter 161: Electromagnetic compatibility IEC 60050-321 1986 International electrotechnical vocabulary Chapter 321: Instrument transformers IEC 60050-601 1985 Chapter 601: Generation, transmission and distribution of electricity - General IEC 60050-604 1987 Chapter 604: Generation, transmission and distribution of electricity - Operation IEC 60056-1) High-voltage alternating-current circuitbreakers IEC 60060-1 + corr. March 1989 1990 High-voltage test techniques Part 1: General definitions and test requirements HD 348 S7 1998 3) HD 588.1 S1 1991 1) Undated reference. 2) Valid edition at date of issue. 3) HD 348 S7:1998 is superseded by EN 62271-100:2001, which is based on IEC 62271-100:2001.