DS/EN :2005/A1:2016. Dansk standard Tillæg

Relaterede dokumenter
Dansk standard DS/EN ISO udgave Campingtelte. Camping tents

Tekniske specifikationer for centrifugalpumper Klasse III

Maskinsikkerhed Elektrisk udstyr på maskiner Del 1: Generelle krav

Elektrostatik Del 4-1: Standardprøvningsmetoder. anvendelser Gulvbelægningers og monterede gulves elektrostatiske egenskaber

Papir og karton Bestemmelse af tykkelse, densitet og massevolumen

Kosmetik Metoder til prøvning af solbeskyttelse In vivo-bestemmelse af UVA-beskyttelse

Pulvermaling Del 7: Bestemmelse af massetab efter ophedning i ovn

Plast Bestemmelse af termoplasts massesmelteindeks (MFR) og volumensmelteindeks (MVR) Del 1: Standardmetode

Centrale strømforsyningssystemer

Malinger og lakker Belysning og procedure for visuel vurdering af belægninger

Maintenance Documentation for maintenance

Miljøledelsessystemer Kravbeskrivelse med råd om anvendelse

Teknisk tegning Flowdiagrammer til procesanlæg Generelle regler

Dansk standard DS/EN Risk management Risk assessment techniques. 1. udgave

Digital lyd - Grænseflade for ulineær PCM-kodet bitstrøm gældende for IEC Del 3: Ulineære PCM-bitstrømme i AC-3-format

Grænseflade for digital lyd Del 1: Generelt

Kapslingsklasser (IP-kode)

Dansk standard DS/EN Weibull analysis. 1. udgave

Kapslingsklasser (IP-kode)

Batchstyring Del 1: Modeller og terminologi

Fritidsbåde Komfurer til flydende brændsel

Dansk standard DS/EN Loft ladders Requirements, marking and testing. 1. udgave

Udstyr til tilslutning af belysningsarmaturer til husholdningsbrug o.l. Del 2: Normblade for DCL

Bordtennis Del 2: Netstolper Krav og prøvningsmetoder

Wc-kummer og wc-møbler Tilslutningsdimensioner

Eurocode 7: Geoteknik Del 1: Generelle regler

Control technology Rules for the designation of measuring instruments

Grænseflade for digital lysstyring (DALI) Del 208: Særlige krav til kontroludstyr Omskifterfunktion (udstyrstype 7)

Karakteristikker af DAB-modtagere

Specifikation og kvalificering af svejseprocedurer for metalliske materialer Kvalificering ved godkendelse af en standardsvejseprocedure

Dansk standard DS/EN Packaging Reuse. 3. udgave

Analysis techniques for system reliability Procedure for failure mode and effects analysis (FMEA)

COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO :2007#

Matematiske udtryk for pålidelighed, tilgængelighed og vedligehold samt for understøttelse af vedligehold

Faste kondensatorer til elektronisk udstyr Del 25-1: Fortryk til detailspecifikation. faste elektrolytiske aluminiumkondensatorer

Miljømærkning Egendeklaration af miljøpåstande (Type II miljømærkning)

Tandpleje Manuelle tandbørster Generelle krav og prøvningsmetoder

Klassifikation og betegnelse af dokumenter for fabriksanlæg, anlæg og udstyr Del 1: Regler og klassifikationstabeller

Solcelleanlæg Termer, definitioner og symboler

Ikke-destruktiv prøvning Lækprøvning Kriterier for valg af metode og teknik

Bogstavsymboler til brug i elektroteknologi Del 2: Telekommunikation og elektronik

Møbler Barnesenge og foldbare barnesenge til privat brug Del 1: Sikkerhedskrav

Svejsekoordination Opgaver og ansvarsforhold

Packaging Requirements for the use of European Standards in the field of packaging and packaging waste

Lavspændingssikringer Del 1: Generelle krav

Eurocode 1: Last på bærende konstruktioner Del 1-3: Generelle laster Snelast

COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO/HL :2012

Roterende elektriske maskiner Del 20-1: Reguleringsmotorer Stepmotorer

Vinduer og døre Vandtæthed Klassifikation

Transkript:

Dansk standard Tillæg DS/EN 61937-7:2005/A1:2016 1. udgave 2016-09-09 Digital lyd Grænseflade for ulineær PCM-kodet bitstrøm, der overholder IEC 60958 Del 7: Ulineære PCM-bitstrømme i henhold til ATRAC-, ATRAC2/3- og ATRAC-X-formaterne Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 7: Non-linear PCM bitstreams according to the ATRAC, ATRAC2/3 and ATRAC-X formats (TA 4)

DS/EN 61937-7:2005/A1:2016 København DS projekt: M299541 ICS: 33.160.01; 33.160.60 Første del af denne publikations betegnelse er: DS/EN, hvilket betyder, at det er en europæisk standard, der har status som dansk standard. Denne publikations overensstemmelse er: IDT med: IEC 61937-7:2004/AMD1:2016. IDT med: EN 61937-7:2005/A1:2016. DS-publikationen er på engelsk. DS-publikationstyper Dansk Standard udgiver forskellige publikationstyper. Typen på denne publikation fremgår af forsiden. Der kan være tale om: Dansk standard standard, der er udarbejdet på nationalt niveau, eller som er baseret på et andet lands nationale standard, eller standard, der er udarbejdet på internationalt og/eller europæisk niveau, og som har fået status som dansk standard DS-information publikation, der er udarbejdet på nationalt niveau, og som ikke har opnået status som standard, eller publikation, der er udarbejdet på internationalt og/eller europæisk niveau, og som ikke har fået status som standard, fx en teknisk rapport, eller europæisk præstandard DS-håndbog samling af standarder, eventuelt suppleret med informativt materiale DS-hæfte publikation med informativt materiale Til disse publikationstyper kan endvidere udgives tillæg og rettelsesblade DS-publikationsform Publikationstyperne udgives i forskellig form som henholdsvis fuldtekstpublikation (publikationen er trykt i sin helhed) godkendelsesblad (publikationen leveres i kopi med et trykt DS-omslag) elektronisk (publikationen leveres på et elektronisk medie) DS-betegnelse Alle DS-publikationers betegnelse begynder med DS efterfulgt af et eller flere præfikser og et nr., fx DS 383, DS/EN 5414 osv. Hvis der efter nr. er angivet et A eller Cor, betyder det, enten at det er et tillæg eller et rettelsesblad til hovedstandarden, eller at det er indført i hovedstandarden. DS-betegnelse angives på forsiden. Overensstemmelse med anden publikation: Overensstemmelse kan enten være IDT, EQV, NEQ eller MOD IDT: Når publikationen er identisk med en given publikation. EQV: Når publikationen teknisk er i overensstemmelse med en given publikation, men præsentationen er ændret. NEQ: Når publikationen teknisk eller præsentationsmæssigt ikke er i overensstemmelse med en given standard, men udarbejdet på baggrund af denne. MOD: Når publikationen er modificeret i forhold til en given publikation.

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 61937-7:2005/A1 September 2016 ICS 33.160.01 English Version Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 7: Non-linear PCM bitstreams according to the ATRAC, ATRAC2/3 and ATRAC-X formats (TA 4) (IEC 61937-7:2004/A1:2016) Audionumérique - Interface pour les flux de bits audio à codage MIC (PCM) non linéaire conformément à la CEI 60958 - Partie 7: Flux de bits MIC (PCM) non-linéaire selon les formats ATRAC, 2/3 ATRAC et X-ATRAC (IEC 61937-7:2004/A1:2016) Digitalton - Schnittstelle für nichtlinear-pcm-codierte Audio- Bitströme unter Verwendung von IEC 60958 - Teil 7: Nichtlineare PCM-Bitströme entsprechend ATRAC-, ATRAC2/3- und ATRAC-X-Formaten (IEC 61937-7:2004/A1:2016) This amendment A1 modifies the European Standard EN 61937-7:2005; it was approved by CENELEC on 2016-06-17. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61937-7:2005/A1:2016 E

EN 61937-7:2005/A1:2016 European foreword The text of document 100/2503/CDV, future IEC 61937-7:2005/A1, prepared by IEC/TC 100, "Audio, video and multimedia systems and equipment" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61937-7:2005/A1:2016. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement latest date by which the national standards conflicting with the document have to be withdrawn (dop) 2017-03-17 (dow) 2019-06-17 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61937-7:2005/A1:2016 was approved by CENELEC as a European Standard without any modification. 2

INTERNATIONAL STANDARD NORME INTERNATIONALE IEC 61937-7 Edition 2.0 2016-05 AMENDMENT 1 AMENDEMENT 1 Digital audio Interface for non-linear PCM encoded audio bitstreams applying to IEC 60958 Part 7: Non-linear PCM bitstreams according to the ATRAC, ATRAC2/3 and ATRAC-X formats Audionumérique Interface pour les flux de bits audio à codage MIC non linéaire conformément à l IEC 60958 Partie 7: Flux de bits MIC non linéaire selon les formats ATRAC, ATRAC2/3 et ATRAC-X IEC 61937-7:2004-11/AMD1:2016-05(en-fr)

2 IEC 61937-7:2004/AMD1:2016 IEC 2016 FOREWORD This amendment has been prepared by technical area 4: Digital system interfaces and protocols of IEC technical committee 100: Audio, video and multimedia systems and equipment. The text of this amendment is based on the following documents: CDV 100/2503/CDV Report on voting 100/2614/RVC Full information on the voting for the approval of this amendment can be found in the report on voting indicated in the above table. The committee has decided that the contents of this amendment and the base publication will remain unchanged until the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. Insert, after the FOREWORD, the following new INTRODUCTION: INTRODUCTION to Amendment 1 The revision of IEC 61937-7:2004 has become necessary to specify the new additional subdata-types of ATRAC-X low latency. This amendment includes the following technical changes: a) new three subdata-types of ATRAC-X low latency are defined; b) specific properties such as reference points, repetition period, and decoding latency are specified for each subdata-type of ATRAC-X. 4.2 ATRAC, ATRAC2/3 and ATRAC-X burst-info Replace the existing Table 1 by the following new table: