Dansk standard DS/EN 13032-2 1. udgave 2005-03-18 Lys og belysning Måling og præsentation af fotometriske data for lyskilder og armaturer Del 2: Præsentation af data for indendørs og udendørs arbejdspladser Light and lighting Measurement and presentation of photometric data of lamps and luminaires Part 2: Presentation of data for indoor and outdoor work places
DS/EN 13032-2 København DS projekt: 51520 ICS: 17.180.20; 29.140.01; 91.160.01 Første del af denne publikations betegnelse er: DS/EN, hvilket betyder, at det er en europæisk standard, der har status som dansk standard. Denne publikations overensstemmelse er: IDT med: EN 13032-2:2004. DS-publikationen er på engelsk. DS-publikationstyper DANSK STANDARD udgiver forskellige publikationstyper. Typen på denne publikation fremgår af forsiden. Der kan være tale om: Dansk standard standard, der er udarbejdet på nationalt niveau, eller som er baseret på et andet lands nationale standard eller standard, der er udarbejdet på internationalt og/eller europæisk niveau, og som har fået status som dansk standard DS-information publikation, der er udarbejdet på nationalt niveau, og som ikke har opnået status som standard, eller publikation, der er udarbejdet på internationalt og/eller europæisk niveau, og som ikke har fået status som standard, fx en teknisk rapport, eller europæisk præstandard DS-håndbog samling af standarder, eventuelt suppleret med informativt materiale DS-hæfte publikation med informativt materiale Til disse publikationstyper kan endvidere udgives tillæg og rettelsesblade DS-publikationsform Publikationstyperne udgives i forskellig form som henholdsvis fuldtekstpublikation (publikationen er trykt i sin helhed) godkendelsesblad (publikationen leveres i kopi med et trykt DS-omslag) elektronisk (publikationen leveres på et elektronisk medie) DS-betegnelse Alle DS-publikationers betegnelse begynder med DS efterfulgt af et eller flere præfikser og et nr. fx DS 383, DS/EN 5414 osv. Hvis der efter nr. er angivet at A eller Cor, betyder det, enten at det er et tillæg eller et rettelsesblad til hovedstandarden, eller at det er indført i hovedstandarden. DS-betegnelse angives på forsiden. Overensstemmelse med anden publikation: Overensstemmelse kan enten være IDT, EQV, NEQ eller MOD IDT: Når publikationen er identisk med en given publikation. EQV: Når publikationen teknisk er i overensstemmelse med en given publikation, men præsentationen er ændret. NEQ: Når publikationen teknisk eller præsentationsmæssigt ikke er i overensstemmelse med en given standard, men udarbejdet på baggrund af denne. MOD: Når publikationen er modificeret i forhold til en given publikation.
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 13032-2 December 2004 ICS 17.180.20; 29.140.01 English version Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 2: Presentation of data for indoor and outdoor work places Lumière et éclairage - Mesure et présentation des caractéristiques photométriques des lampes et luminaires - Partie 2 : Présentation des données utilisées dans les lieux de travail intérieurs et extérieurs This European Standard was approved by CEN on 15 November 2004. Licht und Beleuchtung - Messung und Darstellung photometrischer Daten von Lampen und Leuchten - Teil 2: Darstellung der Daten für Arbeitsstätten in Innenräumen und im Freien CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13032-2:2004: E
EN 13032-2:2004 (E) Contents Page Foreword...3 Introduction...4 1 Scope...5 2 Normative references...5 3 Terms and definitions...5 4 Lamp data...6 5 Luminaire data...7 Annex A (normative) Calculation of UF-tables...10 Bibliography...18 2
EN 13032-2:2004 (E) Foreword This document (EN 13032-2:2004) has been prepared by Technical Committee CEN/TC 169 Light and lighting, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2005, and conflicting national standards shall be withdrawn at the latest by June 2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. 3
EN 13032-2:2004 (E) Introduction There are many lighting solutions that can satisfy the lighting criteria specified in EN 12464-1 and pren 12464-2. To design these solutions, photometric data of the equipment are required. The equipment may include the commonly used general purpose luminaires as well as uplighters, wall washers, adjustable directional lights, floodlights, desk lights, etc. This document specifies the required data. 4
EN 13032-2:2004 (E) 1 Scope This document specifies the required data for lamps and luminaires for the verification of conformity to the requirements of EN 12464-1 and pren 12464-2. It also specifies data that are commonly used for lighting of indoor and outdoor work places. When these data are provided, they should conform to this document. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. pren 12464-2, Light and lighting Lighting of work places Part 2: Outdoor work places EN 12665:2002, Light and lighting Basic terms and criteria for specifying lighting requirements CIE 117:1995, Discomfort glare in interior lighting 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 12665:2002 and the following apply. NOTE This Clause defines terms and quantities that are in use and important to this document, and which are not given in IEC 60050-845. 3.1 correction factor factor to modify the luminaire data as presented on a particular photometric data sheet to those of similar luminaires (for example: Ballast Lumen Factor, length, lumen corrections) 3.2 essential data lamp and luminaire data required for the verification of conformity to the requirements of EN 12464-1 and pren 12464-2 3.3 lamp code any combination of letters and numbers by which the lamp type is identified 3.4 lamp dimensions all dimensions of the lamp that are relevant for the luminaire 3.5 lamp energy efficiency class (LEEC) lamp energy efficiency class assigned to the lamp in accordance with the energy efficiency index defined in the Lamps Directive 98/11/EC and measured in accordance with EN 50285 3.6 luminaire code any combination of letters and numbers by which the luminaire type is identified 5