Dansk standard Rettelsesblad DS/EN 60228/AC:2005 1. udgave Ledere af isolerende kabler Conductors of insulated cables
DS/EN 60228/AC:2005 København DS projekt: M290250 ICS: 29.060.01 Første del af denne publikations betegnelse er: DS/EN, hvilket betyder, at det er en europæisk standard, der har status som dansk standard. Denne publikations overensstemmelse er: IDT med: EN 60228:2005. DS-publikationen er på engelsk. DS-publikationstyper Dansk Standard udgiver forskellige publikationstyper. Typen på denne publikation fremgår af forsiden. Der kan være tale om: Dansk standard standard, der er udarbejdet på nationalt niveau, eller som er baseret på et andet lands nationale standard, eller standard, der er udarbejdet på internationalt og/eller europæisk niveau, og som har fået status som dansk standard DS-information publikation, der er udarbejdet på nationalt niveau, og som ikke har opnået status som standard, eller publikation, der er udarbejdet på internationalt og/eller europæisk niveau, og som ikke har fået status som standard, fx en teknisk rapport, eller europæisk præstandard DS-håndbog samling af standarder, eventuelt suppleret med informativt materiale DS-hæfte publikation med informativt materiale Til disse publikationstyper kan endvidere udgives tillæg og rettelsesblade DS-publikationsform Publikationstyperne udgives i forskellig form som henholdsvis fuldtekstpublikation (publikationen er trykt i sin helhed) godkendelsesblad (publikationen leveres i kopi med et trykt DS-omslag) elektronisk (publikationen leveres på et elektronisk medie) DS-betegnelse Alle DS-publikationers betegnelse begynder med DS efterfulgt af et eller flere præfikser og et nr., fx DS 383, DS/EN 5414 osv. Hvis der efter nr. er angivet et A eller Cor, betyder det, enten at det er et tillæg eller et rettelsesblad til hovedstandarden, eller at det er indført i hovedstandarden. DS-betegnelse angives på forsiden. Overensstemmelse med anden publikation: Overensstemmelse kan enten være IDT, EQV, NEQ eller MOD IDT: Når publikationen er identisk med en given publikation. EQV: Når publikationen teknisk er i overensstemmelse med en given publikation, men præsentationen er ændret. NEQ: Når publikationen teknisk eller præsentationsmæssigt ikke er i overensstemmelse med en given standard, men udarbejdet på baggrund af denne. MOD: Når publikationen er modificeret i forhold til en given publikation.
EUROPEAN STANDARD EN 60228 NORME EUROPÉENNE EUROPÄISCHE NORM February 2005 ICS 29.060.20 Supersedes HD 383 S2:1986 + A1:1989 + A2:1993 Incorporates Corrigendum May 2005 English version Conductors of insulated cables (IEC 60228:2004) Ames des câbles isolés (CEI 60228:2004) Leiter für Kabel und isolierte Leitungen (IEC 60228:2004) This European Standard was approved by CENELEC on 2004-12-07. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60228:2005 E
EN 60228:2005 2 Foreword The text of document 20/718/FDIS, future edition 3 of IEC 60228, prepared by IEC TC 20, Electric cables, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60228 on 2004-12-07. A draft amendment, prepared by the Technical Committee CENELEC TC 20, Electric cables, was submitted to the formal vote and was approved by CENELEC for inclusion into EN 60228 on 2004-12-07. This European Standard supersedes HD 383 S2:1986 + A1:1989 + A2:1993. The principal changes with respect to HD 383 S2 are addition of a definition for nominal cross-sectional area; an increase in the range of conductor sizes in Tables 1 and 2; addition of a note that solid aluminium alloy conductors, having the same dimensions as aluminium conductors, will have a higher resistance; strengthening of the recommendations for dimensional limits of compacted stranded copper conductors. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2005-09-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2007-12-01 Annex ZA, Special national conditions, has been added by CENELEC. The contents of the corrigendum of May 2005 have been included in this copy. Endorsement notice The text of the International Standard IEC 60228:2004 was approved by CENELEC as a European Standard without any modification.
3 EN 60228:2005 Annex ZA (normative) Special national conditions Special national condition: National characteristic or practice that cannot be changed even over a long period, e.g. climatic conditions, electrical earthing conditions. If it affects harmonization, it forms part of the European Standard. For the countries in which the relevant special national conditions apply these provisions are normative, for other countries they are informative. Clause Table 3 Special national condition Cyprus, Ireland, United Kingdom Add: 1,25 0,21 15,6 16,1 NOTE This conductor is for cables which are intended for use on appliances fitted with 13 A plugs conforming to BS 1363-1 or I.S. 401. Table C.1 Cyprus, Ireland, United Kingdom Add: 1,25 1,7