Dansk Standard DS/EN 12424 1. udgave Godkendt:2000-11-07 Porte til industri og andre erhverv samt garageporte Modstandsevne overfor vindbelastning Klassifikation Industrial, commercial and garage doors and gates Resistance to wind load Classification DANSK STANDARD - Eftertryk uden tilladelse forbudt Kollegievej 6 DK-2920 Charlottenlund Tel (+45) 39 96 61 01 Fax (+45) 39 96 61 02 E-mail: DANSK.STANDARD@ds.dk www.ds.dk
DS/EN 12424 København DS Projekt: 23065 ICS: 91.090 Deskriptorer: specifikationer,vind,vindbelastning,prøvning,modstande,mærkning,porte,konstruktion,definitioner,klassifikation Første del af denne publikations betegnelse er: DS/EN, hvilket betyder, at det er en europæisk standard, der har status som dansk standard. Denne publikations overensstemmelse er: IDT med: EN 12424:2000 på engelsk DS-publikationstyper DANSK STANDARD udgiver forskellige publikationstyper. Typen på denne publikation fremgår af forsiden. Der kan være tale om: Dansk standard standard, der er udarbejdet på nationalt niveau, eller som er baseret på et andet lands nationale standard eller standard, der er udarbejdet på internationalt og/eller europæisk niveau, og som har fået status som dansk standard DS-information publikation, der er udarbejdet på nationalt niveau, og som ikke har opnået status som standard, eller publikation, der er udarbejdet på internationalt og/eller europæisk niveau, og som ikke har fået status som standard, fx en teknisk rapport, eller europæisk præstandard DS-håndbog samling af standarder, eventuelt suppleret med informativt materiale DS-hæfte publikation med informativt materiale Til disse publikationstyper kan endvidere udgives tillæg og rettelsesblade DS-publikationsform Publikationstyperne udgives i forskellig form som henholdsvis fuldtekstpublikation (publikationen er trykt i sin helhed) godkendelsesblad (publikationen leveres i kopi med et trykt DS-omslag) elektronisk (publikationen leveres på et elektronisk medie) DS-betegnelse Alle DS-publikationers betegnelse begynder med DS efterfulgt af et eller flere præfikser og et nr. fx DS 383, DS/EN 5414 osv. Hvis der efter nr. er angivet at A eller Cor, betyder det, enten at det er et tillæg eller et rettelsesblad til hovedstandarden, eller at det er indført i hovedstandarden. DS-betegnelse angives på forsiden. Overensstemmelse med anden publikation: Overensstemmelse kan enten være IDT, EQV, NEQ eller MOD IDT: Når publikationen er identisk med en given publikation. EQV: Når publikationen teknisk er i overensstemmelse med en given publikation, men præsentationen er ændret. NEQ: Når publikationen teknisk eller præsentationsmæssigt ikke er i overensstemmelse med en given standard, men udarbejdet på baggrund af denne. MOD: Når publikationen er modificeret i forhold til en given publikation.
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 12424 July 2000 ICS 91.060.50 English version Industrial, commercial and garage doors and gates - Resistance to wind load - Classification Portes équipant les locaux industriels, commerciaux et les garages - Résistance à la charge de vent - Classification This European Standard was approved by CEN on 19 July 2000. Tore - Widerstand gegen Windlast - Klassifizierung CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Central Secretariat: rue de Stassart, 36 B-1050 Brussels 2000 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12424:2000 E
Page 2 EN 12424:2000 Contents Page Foreword 2 1 Scope 2 2 Normative References 3 3 Terms and definitions 3 4 Classification 3 5 Marking 4 Bibliography 5 Foreword This European Standard has been prepared by Technical Committee CEN/TC 33 " Doors, windows, shutters, building hardware and curtain walling", the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2001, and conflicting national standards shall be withdrawn at the latest by January 2001. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. No existing EN standard is superseded. This standard is one of a series of performance standards identified within the product standard pren 13421:1998. European Standards as well as relevant national regulations and standards will enable the actual exposure levels to be determined for the individual locations of the products. 1 Scope 1.1 General This European Standard specifies the classification for wind load for doors in a closed position. The doors are intended for installation in areas in the reach of people, for which the main intended uses are giving safe access for goods, vehicles and persons in industrial, commercial or residential premises.
Page 3 EN 12424:2000 The doors may be manually or power operated. NOTE In case of wind load it is not necessary that the door can be opened or closed. This document applies to all doors provided in accordance with pren 13241:1998. 1.2 Exclusions It does not apply to: - lock gates and dock gates; - doors on lifts; - doors on vehicles; - armoured doors; - doors mainly for the retention of animals; - theatre textile curtains; - horizontally moving doors less than 2,5 m wide and 6,25 m 2 area, designed principally for pedestrian use; - revolving doors of any size; - doors outside the reach of people (such as crane gantry fences); - railway barriers; - barriers used solely for vehicles. 2 Normative References This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 12433-1 Industrial, commercial and garage doors and gates - Terminology - Part 1: Types of doors EN 12433-2 Industrial, commercial and garage doors and gates - Terminology - Part 2: Parts of doors pren 12444:1996 Industrial, commercial and garage doors and gates - Resistance to wind load - Testing and calculation pren 13241:1998 Industrial, commercial and garage doors and gates - Product standard 3 Terms and definitions For the purpose of this standard the terms and definitions in EN 12433-1 and EN 12433-2 apply. 4 Classification The wind load performance shall be expressed in relation to classes as specified in table 1.