Dansk standard DS/EN 13950 1. udgave 2005-12-05 Gipsplader Sandwichelementer med termisk og/eller akustisk isolering Definitioner, krav og prøvningsmetoder Gypsum plasterboard thermal/acoustic insulation composite panels Definitions, requirements and test methods
DS/EN 13950 København DS projekt: 44276 ICS: 91.100.10; 91.100.60 Første del af denne publikations betegnelse er: DS/EN, hvilket betyder, at det er en europæisk standard, der har status som dansk standard. Denne publikations overensstemmelse er: IDT med: EN 13950:2005. DS-publikationen er på engelsk. DS-publikationstyper Dansk Standard udgiver forskellige publikationstyper. Typen på denne publikation fremgår af forsiden. Der kan være tale om: Dansk standard standard, der er udarbejdet på nationalt niveau, eller som er baseret på et andet lands nationale standard, eller standard, der er udarbejdet på internationalt og/eller europæisk niveau, og som har fået status som dansk standard DS-information publikation, der er udarbejdet på nationalt niveau, og som ikke har opnået status som standard, eller publikation, der er udarbejdet på internationalt og/eller europæisk niveau, og som ikke har fået status som standard, fx en teknisk rapport, eller europæisk præstandard DS-håndbog samling af standarder, eventuelt suppleret med informativt materiale DS-hæfte publikation med informativt materiale Til disse publikationstyper kan endvidere udgives tillæg og rettelsesblade DS-publikationsform Publikationstyperne udgives i forskellig form som henholdsvis fuldtekstpublikation (publikationen er trykt i sin helhed) godkendelsesblad (publikationen leveres i kopi med et trykt DS-omslag) elektronisk (publikationen leveres på et elektronisk medie) DS-betegnelse Alle DS-publikationers betegnelse begynder med DS efterfulgt af et eller flere præfikser og et nr., fx DS 383, DS/EN 5414 osv. Hvis der efter nr. er angivet et A eller Cor, betyder det, enten at det er et tillæg eller et rettelsesblad til hovedstandarden, eller at det er indført i hovedstandarden. DS-betegnelse angives på forsiden. Overensstemmelse med anden publikation: Overensstemmelse kan enten være IDT, EQV, NEQ eller MOD IDT: Når publikationen er identisk med en given publikation. EQV: Når publikationen teknisk er i overensstemmelse med en given publikation, men præsentationen er ændret. NEQ: Når publikationen teknisk eller præsentationsmæssigt ikke er i overensstemmelse med en given standard, men udarbejdet på baggrund af denne. MOD: Når publikationen er modificeret i forhold til en given publikation.
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 13950 November 2005 ICS 91.100.10; 91.100.60 English Version Gypsum plasterboard thermal/acoustic insulation composite panels - Definitions, requirements and test methods Complexes d'isolation thermique/acoustique en plaques de plâtre - Définitions, exigences et méthodes d'essai This European Standard was approved by CEN on 12 September 2005. Gips-Verbundplatten zur Wärme- und Schalldämmung - Begriffe, Anforderungen und Prüfverfahren CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13950:2005: E
Contents Page Foreword...4 Introduction...5 1 Scope...7 2 Normative references...7 3 Terms and definitions...8 3.1 Terms and definitions of the product...8 3.2 Terminology...8 4 Requirements...9 4.1 General...9 4.2 Fire behaviour...9 4.2.1 Reaction to fire...9 4.2.2 Fire resistance...9 4.3 Water vapour permeability (expressed as water vapour resistance factor)...9 4.4 Flexural strength...10 4.5 Impact resistance...10 4.6 Direct airborne sound insulation...10 4.7 Acoustic absorption...10 4.8 Thermal resistance of the panel...10 4.9 Dimensions and tolerances...10 4.10 Offset...11 4.11 Flatness of the composite...11 4.12 Adhesion/cohesion of the insulating material...11 4.13 Dangerous substances...11 5 Test methods...11 5.1 Sampling...11 5.2 Dimensional measurements...12 5.2.1 Width...12 5.2.2 Length...12 5.2.3 Thickness...12 5.3 Determination of the offset...15 5.3.1 Principle...15 5.3.2 Apparatus...15 5.3.3 Procedure...15 5.3.4 Expression of results...17 5.4 Determination of the flatness of the composite...17 5.4.1 Principle...17 5.4.2 Apparatus and specimens...17 5.4.3 Procedure...17 5.4.4 Expression of results...17 5.5 Determination of the adhesion/cohesion of the insulating material...17 5.5.1 Principle...17 5.5.2 Apparatus...17 5.5.3 Procedure...19 5.5.4 Expression of results...19 6 Evaluation of conformity...20 6.1 General...20 6.2 Type testing...20 6.2.1 General...20 2
6.2.2 Initial type testing...20 6.2.3 Further type testing...20 6.3 Factory production control (FPC)...20 6.3.1 General...20 6.3.2 Personnel...21 6.3.3 Equipment...21 6.3.4 Raw materials and components...21 6.3.5 Product testing and evaluation...21 6.3.6 Traceability and marking...21 6.3.7 Non-conforming products...21 6.3.8 Corrective action...22 6.3.9 Other test methods...22 7 Designation of composite panels...22 8 Marking, labelling and packaging...22 Annex A (informative) Sampling procedure for testing...23 A.1 General...23 A.2 Sampling procedure...23 A.2.1 Random sampling...23 A.2.2 Representative sampling...23 Annex B (normative) Mounting and fixing in the test according to EN 13823 (SBI test)...25 B.1 Mounting and fixing of the composite panels...25 Annex ZA (informative) Clauses of this European Standard addressing provisions of EU Construction Products Directive...27 ZA.1 Scope and relevant characteristics...27 ZA.2 Attestation and declaration of conformity of gypsum plasterboard thermal/acoustic insulation composite panels...28 ZA.3 CE marking and labelling...31 Bibliography...34 3
Foreword This European Standard (EN 13950:2005) has been prepared by Technical Committee CEN/TC 241 Gypsum and gypsum based products, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2006, and conflicting national standards shall be withdrawn at the latest by August 2007. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this European Standard. No existing European Standard is superseded. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. 4
Introduction Diagrams 1 and 2 below show the relationship between this European Standard and the package of European Standards prepared to support the families of gypsum and ancillary products. Diagram 1 Family of gypsum products 5
Diagram 2 Family of ancillary products 6
1 Scope This European Standard specifies the characteristics and performance of thermal/acoustic insulation composite panels made of an insulating material laminated to gypsum plasterboards for which the main intended use is the internal insulation (thermal and/or acoustic) of walls. They are attached with adhesives or by mechanical fixings to vertical solid backgrounds and by mechanical fixings to wood or metal framing with the plasterboard face exposed. The method of fixing and jointing shall ensure that the insulating material is not exposed in its normal application This European Standard covers the following performances characteristics: reaction to fire, fire resistance, water vapour permeability, flexural strength, impact resistance, direct airborne sound insulation and thermal resistance to be measured according to the corresponding European test methods. It provides for the evaluation of conformity of the products to this European Standard. This European Standard covers also additional technical characteristics that are of importance for the use and acceptance of the product by the construction industry. 2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 520:2004, Gypsum plasterboards Definitions, requirements and test methods EN 825:1994, Thermal insulating products for building applications Determination of flatness EN 13501-1, Fire classification of construction products and building elements Part 1: Classification using test data from reaction to fire tests EN 13501-2, Fire classification of construction products and building elements Part 2: Classification using data from fire resistance tests, excluding ventilation services EN 13823, Reaction to fire tests for building products Building products excluding floorings exposed to the thermal attack by a single burning item EN 13963, Jointing materials for gypsum plasterboards Definitions requirements and test methods EN 14190, Gypsum plasterboard products from reprocessing - Definitions, requirements and test methods EN 14496, Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards Definitions, requirements and test methods EN ISO 140-3, Acoustics Measurement of sound insulation in buildings and of building elements Part 3: Laboratory measurements of airborne sound insulation of building elements (ISO 140-3:1995) pren ISO 140-16, Acoustics Measurement of sound insulation in buildings and of building elements Part 16: Laboratory measurement of the sound reduction index improvement by additional lining (ISO/DIS 140-16:2004)) EN ISO 717-1, Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation (ISO 717-1:1996) EN ISO 354, Acoustics Measurement of sound absorption in a reverberation room (ISO 354:2003) 7