EJOT Iso-Corner. Approved fastening element for the planned retro-fitting of medium heavy to heavy attachments to ETICS facades

Transkript

1 Approved fastening element for the planned retro-fitting of medium heavy to heavy attachments to ETICS facades

2 Z video: Product description The is an instaation angle made of polyurethane hard foam for the planned attachment of add-on parts to ETIC systems. Together with an anchor set that is tuned to the substrate, as we as an EJOT Delta PT 100 screw for fastening the attachment in the support element, this results in a perfectly coordinated fastening system on the instaation angle. For the planned retro-fitting of medium heavy to heavy attachments to ETICS facades. Application examples Railings Guardrails Window and sliding shutters Consoles, f.e. for air conditioning units Benefits One element / two instaation surfaces Cut to length at the job site the perfect adaptation to the surface Load application with a distance up to 20 mm to the instaation surface permitted (bridging of non-load-bearing layers e. g. plaster) l l High reliability and load-carrying capacity with this building authorities approved system l l Reduces cold bridging through thermal decoupling l l Can be combined with special Iso-Corner fastening kits (facade anchor or chemical anchor system) l l Fixing the attachment with direct assembly: pre-dri / screw in / done l l Variable screw position and number for highest flexibility / adjustment to the attachment Included in delivery Technical Data Base plate Total height EJOT Iso-Corner 140 Total height EJOT Iso-Corner 200 Total height EJOT Iso-Corner x 270 mm 140 mm 200 mm 300 mm pc pc pc

3 cut to length Flexibly applicable, no matter what the thickness of the insulating material Iso-Corner 300 Thanks to the option of cutting to length on site a streamlined production programme can be achieved. The is available in three lengths and even more flexible to apply as a result. Iso-Corner 200 Iso-Corner 140 Precise cutting of the EJOT Iso- Corner to length after the instaation of the ETICS can be implemented easily and flush to the upper edge of the insulation layer. 3

4 Attachment of add-on parts Direct assembly of add-on parts with EJOT Delta PT 100x60 Fixing: Flexible screw position and number long the axis while maintaining 20 mm edge distance: Montageachse A Montageachse B Option 1: Direct assembly on the instaation axis of the front face of the EJOT Iso- Corner with EJOT Delta PT Option 2: Direct assembly on the instaation axis of the side of the EJOT Iso- Corner with EJOT Delta PT 4

5 Set Delta PT consisting of 2 pcs. EJOT Delta PT 100x60/37 A4 Set Delta PT 1 set Product description The EJOT Delta PT screw included in delivery has been the benchmark in the automotive industry for reliable and easy direct assembly into plastics for many years. For fastening add-on parts on EJOT Iso- Corner Benefits High load capacity direct fastening into plastic material Direct assembly saves time and work steps Easy instaation High fatigue strength l l Safety due to high tensile and torsion strength as we as vibration resistance A wide range of possible tightening torques Technical Data Core hole Ø 8 mm Dri hole depth 40 mm Screw drive AF 13 Load application The load can be applied directly to the instaation surface or at a distance up to 20 mm and distinguishes itself from conventional add-on parts as a result. Sufficient compressive strength for the barrier sheet has to be assured. 5

6 Kit SDF consisting of 3 pcs. EJOT facade anchors SDF-KB-10H SW13/T40 ETA-10/0305 Ø Anchor length L Tolerance compensation non-load-bearing layers (adhesives, plasters, etc.) PU Order description Article number Anchors with steel screws with zinc-plated Cr(VI)-free coating (-V) * 1 kit Kit SDF kit Kit SDF kit Kit SDF *on flat surface areas For fastening the to concrete, rain screens, solid and perforated brick masonry Characteristics Approved for a common building materials l l Reliable hold in problematic building material thanks to optimised expansion part Radial expansion for reliable hold Cr VI-free coating of the screw l l Double safety lock against torsion for secure instaation Assembly l l Core-dri hole at a right angle to the surface of the instaation substrate. Choice of driing method according to approval. l l The dri dust has to be removed from the hole. l l Hole depth at least 10 mm larger than the embedment depth. l l Push anchor sleeve in as far as the connecting surface in dri hole. l l Strictly adhere to minimum embedment depth according to chart! l l Screw enclosed special screw into the the anchor sleeve as far as the connecting surface. Note Please observe European Technical Approval ETA-10/0305 in the planning and processing of products. Further information about parameters and loads can be found in the approval. Characteristic values Hole depth in concrete h 1,1 Effective Embedment depth h nom Dri hole diameter d 0 Drive Characteristic loads Tensile load N Rk,p in concrete C12/15 Temperature range 30 C / 50 C Temperature range 50 C / 80 C Brick Mz , NF Solid sand-lime brick KS 36, NF Solid sand-lime brick KS 20, 8 DF Solid lightweight concrete brick V6, 2 DF Verticay perforated brick HLz , NF Perforated sand-lime brick KSL 12, 4 DF Cavity block made of lightweight concrete Hbl 10, 12 DF Transverse load V Rk,s Anchor with steel screw Bending moment M Rk,s Anchor with steel screw 80 mm 70 mm 10 mm AF13/T kn 4.00 kn 4.00 kn 4.50 kn 4.50 kn 2.00 kn 2.00 kn 2.50 kn 1.20 kn 9.35 kn Nm Accessories (optional) Blow-out pump 8 mm Cleaning brush

7 Kit SDP consisting of 3 pcs. EJOT facade anchors SDP-KB-10G SW13/T40 ETA-12/0502 Ø Anchor length L Tolerance compensation non-load-bearing layers (adhesives, plasters, etc.) PU Order description Article number Anchors with steel screws with zinc-plated Cr(VI)-free coating (-V) * 1 kit Kit SDP kit Kit SDP kit Kit SDP *on flat surface areas l l For fastening the to aerated concrete Note For planning and processing, please observe approval ETA-12/0502. Characteristics l l Facade anchor with two-stage screw l l Reliable form-fit in the substrate thanks to combined expansion zones High load capacity Assembly l l Core-dri hole at a right angle to the surface of the instaation substrate. Choice of driing method according to approval. l l The dri dust has to be removed from the hole. l l Hole depth at least 10 mm larger than the embedment depth. l l Push anchor sleeve in as far as the connecting surface in dri hole. l l Strictly adhere to minimum embedment depth according to chart! l l Screw enclosed special screw into the the anchor sleeve as far as the connecting surface. Characteristic values Dri hole depth t 80 mm Embedment depth h v 70 mm Dri hole diameter d 0 10 mm Drive AF13/T40 Characteristic values Compressive strength aerated concrete [N/mm 2 ] Aerated concrete kn Aerated concrete kn Aerated concrete kn Aerated concrete kn Partial safety factor γ MAAC 2.00 Characteristic Bending moment Steel screw 17.7 Nm / γ Ms 1.50 Accessories (optional) Blow-out pump 8 mm Cleaning brush

8 Kit Injektion consisting of 3 pcs. anchor rods AST and 3 pcs. mesh sleeves USF Kit Injection consisting of 3 pcs. anchor rods AST M10x170-V and 3 pcs. mesh sleeves USF 16x85 1 kit Anchor rod AST approved for polyester and vinyl ester composite mortar For embedment in concrete and solid brick l l For embedment in perforated brick in combination with mesh sleeve Properties of AST steel l l Anchor rod: strength grade 5.8 or 6.8 acc. to EN ISO l l Nut: strength grade 5 or 6 acc. to EN l l Washer: acc. to EN ISO 7089 Note To determine the characteristic load capacity in concrete, approval ETA-16/0107 has to be considered. To determine the characteristic load capacity in solid and perforated brick, approval ETA-16/0089 has to be considered. Embedment depth h ef Concrete Solid brick masonry Perforated brick masonry* 60 mm 90 mm 85 mm Dri hole diameter d o Concrete Solid brick masonry Perforated brick masonry* * When using the mesh sleeve USF 16x85 12 mm 12 mm 16 mm Mesh sleeve USF ETA-16/0089 For embedment in perforated brick Characteristics l l Guarantees exact calibration of threaded rod Note Please observe the corresponding approvals during planning and processing. Accessories (optional) Order description Applications PU Article number Applicator gun AP 300 ml Blow-out pump 8 mm Facade anchors Cleaning brush 14 without mesh sleeve Cleaning brush 18 with mesh sleeve

9 EJOT Iso-Corner Mortar cartridge USF Vinyl resin, styrene-free F120 ETA-16/0107 ETA-16/0089 Order description Content [ml] Composite mortar PU Article number 280 Vinyl resin, styrene-free Multifix USF 280 ml For instaation in cracked concrete (option 1) and non-cracked concrete (option 7) (ETA-16/0107) For instaation in masonry (ETA-16/0089) For instaation in natural stone (without approval) Benefits Processing with common applicator gun possible Can be used in wet concrete and water-fied dri holes Delivery including mixing nozzle Note Please observe the corresponding approvals during planning and processing. Winter version upon request Instaation parameters Anchor rod M10 d0 hef = h0 min - max Instaation parameters / consumption in perforated building materials* Mesh sleeve Anchor rod d0 h0 USF 16x85 M * Fiing of the mesh sleeve complete + 15% d0 Number of fis 11 hef=h0 Processing time and minimum curing time -10* 1h 30 24h -5 1h 30 14h h h h * Min. cartridge temperature +15 ºC d0 48h 28h 14h 4h 2h 40 1h h0 9

10 Iso-Corner pc pc pc Set Delta PT 1 set Accessories Order description Ø Anchor length L Tolerance compensation non-load-bearing layers (adhesives, plasters, etc.) PU Article number Anchors with steel screws with zinc-plated Cr(VI)-free coating (-V) Kit SDF * 1 kit Kit SDF kit Kit SDF kit *on flat surface areas Order description Ø Anchor length L Tolerance compensation non-load-bearing layers (adhesives, plasters, etc.) PU Article number Anchors with steel screws with zinc-plated Cr(VI)-free coating (-V) Kit SDP * 1 kit Kit SDP kit Kit SDP kit *on flat surface areas Kit Injection consisting of 3 pcs. anchor rods AST M10x170-V and 3 pcs. mesh sleeves USF 16x85 1 kit Order description Content [ml] Composite mortar PU Article number Multifix USF 280 ml 280 Vinyl resin, styrene-free 1 pc Optional accessories Order description Applications PU Article number Applicator gun AP 300 ml Blow-out pump 8 mm Cleaning brush 12 Facade anchors Cleaning brush 14 without mesh sleeve Cleaning brush 18 with mesh sleeve

11 Notizen 11

12 EJOT Baubefestigungen GmbH In der Stockwiese 35 D Bad Laasphe Phone: Fax: Website: EN/04.18