CTS-Temperature Test Chambers (Bench Top Version)

Transkript

1 CTS-Temperature Test Chambers (Bench Top Version) The latest generation with innovative technique and future-oriented design. Basic Equipment: capacitive Multi-Touch-Display in the front defined keys for elementary functions of the installation such as start/stop, fixed-value/automatic operation, interruption, light, etc. USB -Connection to save measuring data on USB Stick Ethernet Interface/RS 22 Interface 2 Digital Out, to switch test specimen ON/OFF adjustable software-temperature-limiter min./max. shelf, stainless steel entry port Ø 0 mm on the right side Your benefits: low consumption data minimum noise level user-friendly operation and programming uniform operation due to identical Multi-Touch-Display for all chamber sizes Service-friendly construction international standards are fulfilled (CE-Conformity) Test space capacity in Litres: 2 / 0 Temperature range: -0 C / +180 C - C / +180 C

2 CTS-Temperature Test Chambers (Bench Top Version) Type Test space litres Test space dimensions height mm, appr. width mm, appr. depth mm, appr. Overalll dimensions height mm, appr. width mm, appr. depth mm, appr. Design Temperature tests Temperature range C Temp. change rate cooling acc IEC K/min Temp. change rate heating acc IEC K/min max. thermal load at +20 C W Temperature fluctuation K Nominal voltage Nominal power kw, appr. Refrigeration units Weight kg, appr. Noise level db(a) T-0/ bench top cabinet, 8 <± 0, 20 V + /-% 1/N, 0 Hz 2, T-0/ bench top cabinet <± 0, 20 V + /-% 1/N, 0 Hz 2, T-/ bench top cabinet -/+180 <± 0, 20 V + /-% 1/N, 0 Hz 2,8 10 <2 All figures are average values which have been obtained at a temperature of +2 C, without test specimen, without thermal load and without options. Control: Multi-Touch-Display with integrated programm controller Test space: Stainless steel grade 1.01 Refrigerants: environmental friendly refrigerants Options: add. entry ports Ø 0 mm, 80 mm und 12 mm Rack incl. 1 shelf Table with height 0 or mm Window, multiple glazed add. Pt 0 for temperature measuring on test specimen reversible to controller function air dryer system Temperature protection for test-specimen CID software for programming and documentation variable air speed in the testspace RS 22 interface changeable to USB notch Other chamber sizes and options on request. We reserve the right to make modifications due to technical development. CTS GmbH Lotzenäcker 21 D-7279 Hechingen Germany Tel.: +9 (0) 7 71/ Fax: +9 (0) 7 71/ [email protected]

3 CTS-Temperature Test Chambers The latest generation with innovative technique and future-oriented design. Basic Equipment: capacitive Multi-Touch-Display in the front defined keys for elementary functions of the installation such as start/stop, fixed-value/automatic operation, interruption, light, etc. USB-Connection to save measuring data on USB Stick Ethernet Interface/RS 22 Interface 2 Digital Out, to switch test specimen ON/OFF adjustable software-temperature-limiter min./max. shelf, stainless steel entry port Ø 0 mm on the right side single-hand operated door handle, lockable Your benefits: low consumption data minimum noise level user-friendly operation and programming uniform operation due to identical Multi-Touch-Display for all chamber sizes temperature measuring with Pt 0 in air inlet and air outlet Service-friendly construction international standards are fulfilled (CE-Conformity) Test space capacity in Litres: 0 / 200 / 0 / 00 / 00 / 00 / 2000 Temperature range: -0 C / +180 C -70 C / +180 C

4 CTS-Temperature Test Chambers / series T-0 and T-70 Type Test space litres Test space dimensions height mm, appr. width mm, appr. depth mm, appr. Overall dimensions height mm, appr. width mm, appr. depth mm, appr. Temperature tests Temperature range T-0 /... C T-70 /... C Temp. change rate cooling T-0 /... K / min acc. IEC T-70 /... K/ min Temp. change rate heating T-0 /... K / min acc. IEC T-70 /... K/ min max. thermal load at +20 C T-0 /... W T-70 /... W Temperature fluctuation K Nominal voltage Nominal power T-0 /... kw, ca. T-70 /... kw, ca. Refrigeration unit Weight T-0 /... kg, ca. T-70 /... kg, ca. Noise level db(a) T-0/0 T-/ /+180 2, 1 20 V + /-% 1/N, 0Hz < T-0/200 T-70/ ,2 0 <8 T-0/0 T-70/ T-0/00 T-70/ <± 0, T-0/00 T-70/ , 2, 0 0 7,2 V + /-% /N, 0 Hz 7,2 8,7 7, 8, <8 <8 <8 T-0/00 T-70/ , ,, <8 All figures are average values which have been obtained at a temperature of +2 C, without test specimen, without thermal load and without options. Control: Multi-Touch-Display with integrated programm controller Test space: Stainless steel grade 1.01 Refrigerants: environmental friendly refrigerants Options: add. entry ports Ø 0 mm, 80 mm and 12 mm add. shelves Panoramic window, multiple glazed sized 70 x 7 mm, > 200 ltr. incl. LED-Light Hand-holes in the door add. Pt 0 for temperature measuring on test specimen reversible to controller function air dryer system Mobile design Temperature protection for test-specimen water cooled refrigeration unit CID software for programming and documentation variable air speed in the testspace RS 22 interface changeable to USB notch Other chamber sizes and options on request. We reserve the right to make modifications due to technical development. CTS GmbH Lotzenäcker 21 D-7279 Hechingen Germany Tel.: +9 (0) 7 71/ Fax: +9 (0) 7 71/ [email protected]

5 CTS-Temperature-/Climatic- Stress-Screening-Chambers The latest generation with innovative technique and future-oriented design. Basic Equipment: capacitive Multi-Touch-Display in the front service-friendly capacitive humidity measurement system defined keys for elementary functions of the installation such as start/stop, fixed-value/automatic operation, interruption, light, etc. USB -Connection to save measuring data on USB Stick Ethernet Interface/RS 22 Interface 2 digital Out, to switch test specimen ON/OFF adjustable software-temperature-limiter min./max. shelf, stainless steel entry port Ø 0 mm on the right side single-hand operated door handle, lockable Screening Chambers with K/min, K/min and K/min Test space capacity in Litres: 0 / 200 / 0 / 00 / 00 / 00 / 2000 Temperature range: -0 C / +180 C; -70 C / +180 C Your benefits: low consumption data minimum noise level extremely high temperature change rates user-friendly operation and programming uniform operation due to identical Multi-Touch-Display for all chamber sizes demineralized water system with level indicator temperature measuring with Pt 0 in air inlet and air outlet Service-friendly construction international standards are fulfilled (CE-Conformity)

6 Temperature-/Climatic-Stress-Screening-Chambers K/min. K/min. K/min. Type TS -0/..., CS-0/... -0/ /0- -0/00- -0/00- -0/00- -0/ /0- -0/00- -0/00- -0/00- -0/ /- -0/8- -0/120- TS -70/..., CS-70/ /0- -70/ /0- -70/ / / /0- -70/ /0- -70/ / / / /0- -70/- -70/8- -70/120- Test space litres Test space dimensions height mm, approx width mm, approx depth mm, approx Overall dimensions height mm, approx width mm, approx depth mm, approx Temperature Tests Temperature range TS-0 /... CS-0 /... C TS-70 /... CS-70 /... C Temp. Change rate cooling TS-0 /... CS-0 /... K / min 19 acc. IEC TS-70 /... CS-70 /... K / min Temp. Chang rate heating TS-0 /... CS-0 /... K / min acc. IEC TS-70 /... CS-70 /... K / min max. thermal load TS-0 /... CS-0 /... W at +20 C TS-70 /... CS-70 /... W Temperature fluctuation K <± 0, <± 0, <± 0, Climatic Test Temperature range CS-0 /... CS-70 /... C + bis +9 + bis +9 + bis +9 Humidity range CS-0 /... CS-70 /... % r. F. bis 98 bis 98 bis 98 bis 9 bis 98 bis 9 Dew point range I CS-0 /... CS-70 /... C +7 bis bis bis +9 Dew point range II CS-0 /... CS-70 /... C bis +7 bis +7 bis +7 Humidity fluctuation I CS-0 /... CS-70 /... % r. F. <± 1, <± 1, <± 1, Humidity fluctuation II CS-0 /... CS-70 /... % r. F. <± <± <± Temperature fluctuation CS-0 /... CS-70 /... K <± 0, <± 0, <± 0, Nominal voltage V +% %, /N, 0 Hz V +% %, /N, 0 Hz V +% %, /N, 0 Hz Nominal power TS-0 /... kw, approx. 9, 9, 11 1, 1,2 1, 1,, 20,9 20,9,1 2, 2,7 0,8 CS-0 /... kw, approx.,, 12,1 1,2 1,2 1, 1,, 20,9 20,9,1 2, 2,7 0,8 TS-70 /... kw, approx., 12 11,8 1,2 1, 1,1 7, 1, 1, 1, 20, , 2, 27, 8,1 CS-70 /... kw, approx ,8 1,2 1, 1,1 1, 1, 1, 20,2 18, 2, 27, 8,1 Refrigeration unit water cooled water cooled water cooled Weight Noise level TS-0 /... CS-0 /... kg, approx. TS-70 /... CS-70 /... kg, approx. db(a) 00 <0 0 <8 00 <8 700 <2 < < 0 <0 00 <2 700 <2 800 < < <70 <2 800 < < <8 10 < <7 All figures are average values which have been obtained at a temperature of +2 C, without test specimen, without thermal load and without options. Control: Multi-Touch-Display with Options: integrated program controller add. Entry ports Ø 0 mm, add. Pt 0 for temperature measuring temperature protection for test specimen Test Space:: Stainless steel grade mm und 12 mm on test specimen reversible to controller CID software for programming and Refrigerants: environmental friendly refrigerants add. Shleves function documentation Humidity system: (only type CS) capacitive measuring panoramic window, multiple glazed, sized air dryer system variable air speed in the test space 70 x 7 mm, < 200 ltr., incl. LED-light mobile design RS 22 interface changeable to USB hand-holes in the door air/water cooled refrigeration unit notch Other chamber sizes and options on request. We reserve the right to make modifications due to technical development.

7 How to find us: Exit Exit CTS GmbH Lotzenäcker 21 D-7279 Hechingen Germany Tel.: +9 (0) 7 71/ Fax: +9 (0) 7 71/ [email protected]

8 CTS-Climatic Test Chambers The latest generation with innovative technique and future-oriented design. Basic Equipment: capacitive Multi-Touch-Display in the front service-friendly capacitive humidity measurement system defined keys for elementary functions of the installation such as start/stop, fixed-value/automatic operation, interruption, light, etc. USB-Connection to save measuring data on USB Stick Ethernet Interface/RS 22 Interface 2 digital Out, to switch test specimen ON/OFF adjustable software-temperature-limiter min./max. shelf, stainless steel entry port Ø 0 mm on the right side single-hand operated door handle, lockable Test space capacity in Litres: 0 / 200 / 0 / 00 / 00 / 00 / 2000 Temperature range: + C / +180 C; -20 C / +180 C -0 C / +180 C; -70 C / +180 C Your benefits: low consumption data minimum noise level user-friendly operation and programming uniform operation due to identical Multi-Touch-Display for all chamber sizes demineralized water system with level indicator temperature measuring with Pt 0 in air inlet and air outlet Service-friendly construction international standards are fulfilled (CE-Conformity)

9 CTS-Climatic Test Chambers / series C-0 and C-70 Type Test space litres Test space dimensions height mm, appr. width mm, appr. depth mm, appr. Overall dimensions height mm, appr. width mm, appr. depth mm, appr. Temperature tests Temperature range C-0 /... C C-70 /... C Temp. change rate cooling C-0 /... K / min acc. IEC C-70 /... K / min Temp. change rate heating C-0 /... K / min acc. IEC C-70 /... K / min max. thermal load at +20 C C-0 /... W C-70 /... W Temperature fluctuation K Climatic tests Termperature range C Humidity range % r. F. Dew point range I C Dew point range II C Humidity fluctuation I, temporally % r. F. Humidity fluctuation II, temporally % r. F. Temperature fluctuation, temporally K Nominal voltage Nominal power C-0 /... kw, appr. C-70 /... kw, appr. Refrigeration unit Weight C-0 /... kg, appr. C-70 /... kg, appr. Noise level db(a) C-0/0 C-/ / bis V + /-% 1/N, 0 Hz,, 0 80 C-0/200 C-70/ ,1 7,1 0 C-0/0 C-70/ Stangeräte 000 7,1 7,1 0 <8 <± 0, C-0/00 C-70/ bis +9 + bis bis +9 - bis +7 <± 1, <± <± 0, V + /-% /N, 0 Hz 8,2 8, <8 C-0/00 C-70/ , 2, 0 0 8, 8,9 800 <8 C-0/00 C-70/ , ,2, <8 All figures are average values which have been obtained at a temperature of +2 C, without test specimen, without thermal load and without options. Technical data for types +/ 20 C on request. Control: Multi-Touch-Display with Test space: Stainless steel grade 1.01 Humidity system: capacitive measuring integrated programm controller Refrigerants: environmental friendly refrigerants Options: add. entry ports Ø 0 mm, 80 mm and 12 mm add. shelves Panoramic window, multiple glazed sized 70 x 7 mm, > 200 ltr. incl. LED-Light Hand-holes in the door add. Pt 0 for temperature measuring on test specimen reversible to controller function air dryer system Mobile design Temperature protection for test-specimen water cooled refrigeration unit CID software for programming and documentation variable air speed in the testspace RS 22 interface changeable to USB notch Other chamber sizes and options on request. We reserve the right to make modifications due to technical development. CTS GmbH Lotzenäcker 21 D-7279 Hechingen Germany Tel.: +9 (0) 7 71/ Fax: +9 (0) 7 71/ [email protected]

10 CTS-Termal-Shock-Test Chambers The latest generation with innovative technique and future-oriented design. Extreme temperature changes up to 0 K/min. CTS Thermal-Shock-Test-Chambers comply with current national and international standards (DIN, BS, MIL). Long term testing up to 000 cycles. Basic Equipment: capacitive Multi-Touch-Display in the front defined keys for elementary functions of the installation such as start/stop, fixed-value/automatic operation, interruption, light, etc. USB-Connection to save measuring data on USB Stick Ethernet Interface/RS 22 Interface Door with window, incl. LED-light 2 digital Out, to switch test sepcimen ON/OFF shelf, stainless steel entry port, size depending on chamber type single-hand operated door handle, lockable temperature cycling in cold chamber (2,, 10 Litre) eco-mode to save energy costs air dryer system to avoid freezing in long-time testing Test space capacity in Litres: 2 / / 10 / 0 Temperature range: Hot chamber +0 C / +220 C Cold chamber -80 C / +0 C Your benefits: low consumption data minimum noise level user-friendly operation and programming uniform operation due to identical Multi-Touch-Display for all chamber sizes temperature measuring with Pt 0 in air inlet and air outlet Service-friendly construction international standards are fulfilled (CE-Conformity) compact design with small installation area

11 CTS-Thermal-Shock-Test Chambers Type Test space litres Test space dimensions height mm, appr. width mm, appr. depth mm, appr. Overall dimensions height mm, appr. width mm, appr. depth mm, appr. Temperature tests Temperature range hot chamber C cold chamber C Adaption time of IC s < min kg Changing time sec. Test load, max. kg Temperature fluctuation, temporally K Nominal voltage Nominal power kw, appr. Refrigeration units Weight Cabinet kg, appr. Noise level db(a) entry ports ø mm TSS-70/ (2*) / /+0 2, < ±1 V + /-% /N, 0 Hz 9,7 8 0 TSS-70/ (2*) / /+0 2, < 22 ±1 V + /-% /N, 0 Hz 9, TSS-70/ (22*) / /+0 < 0 ±1 V + /-% /N, 0 Hz 19 water cooled 90 <0 12 TSS-70/ (200*) 210 (200**) / /+0 2 < 1 ±1 V + /-% /N, 0 Hz water cooled 2 <8 12 All figures are average values which have been obtained at a temperature of +2 C, without test specimen, without thermal load and without options. (* = height with spindle ** = width with spindle drive) Control: Multi-Touch-Display with integrated programm controller Test space: Stainless steel grade 1.01 Refrigerants: environmental friendly refrigerants Options: add. shelves and protection for the basket increased temperature range in hot chamber to +20 C (for 10 ltr.) temerature protection for test specimen add. Pt 0 for temperature measuring on test specimen CID software for programming and documentation Water cooled refrigeration unit for TSS -70/2 and TSS -70/ Air cooled refrigeration unit for TSS -70/10 and TSS -70/0 RS 22 interface changeable to USB Add. entry ports Higher test load Separate machine unit, incl. control unit (0 ltr.) Other chamber sizes and options on request. We reserve the right to make modifications due to technical development. CTS GmbH Lotzenäcker 21 D-7279 Hechingen Germany Tel.: +9 (0) 7 71/ Fax: +9 (0) 7 71/ [email protected]

12 CTS-Pharma-Climatic-Test-Chambers Type CP /00 & Type CP /1200 for long-term stability test with highest testing precision. Standard-Version of the Productline CP : Capacitive measuring system Casing in stainless-steel Door lockable Interface RS 22 RVS shelves Entry port ø 0 mm Multicolour touchpanel; 2 Bit Controller Low noise refrigerating unit Potential-free contact for malfunction signal Options: door with window Your Benefits: Test Space Capacity in Litres: 00 / 1200 Temperature Range: + C / +0 C Humidity range: - 90% r.h. Dew Point Range I: +7 C to + C II: Use of environmentally friendly materials and refrigerants Simple user-friendly operation Own CTS-controller optimized to CTSsystems Internal and external material in stainless steel for easy cleaning

13 CTS-Pharma-Climatic-Test-Chambers Serie CP 00 / 1200 Ltr. Type CP /00 CP /1200 Test space Litres, appr Test space dimensions hight mm, appr width mm, appr. 9 2 x 0 depth mm, appr. 7 7 Overall dimensions hight mm, appr width mm, appr. 7 1 depth mm, appr Temperature test Temperature range C + / +0 +/+0 Temperature fluctuation K ±0, temporally ±0, temporally Cliamtic test Temperature range C + / +0 + / +0 Humidity range % RH / 90 ± / 90 Dew point range C +7 / + and - / / + and - / +7 Humidity fluctuation % RH ±1 / ±1 / Temperature fluctuation K ±0, temporally ±0, temporally Nominal voltage 20 V + / -%, 1/N, 0 Hz 20 V + / -%, 1/N, 0 Hz Nominal power kw, appr. 1, 2,0 Refrigeration unit aircooled aircooled Weight kg, appr All figures are average values which have been obtained at a temperature of +2 C, without test specimens, without thermal load and without accessories. Design: Control: Microprocessor control and monitoring system Test space: Stainless steel nr Casing: Stainless steel nr Refrigerants: Chloride free, hermetically sealed Humidity system: Capacitive measuring Options: add. entry ports ø 0 mm temperature protection for test-specimen add. shelves CID software for programming and documentation add. Pt 0 for temperature measuring on test specimen alternative extended temperature range down to ± 0 C reversible to controller function reservoir for humidification water RS 22 interface changeable to USB door with fullsize window (reduced dew-point-range < +0 C) Other chamber sizes and options on request. We reserve the right to make alterations due to technical development. CTS Nederland CTS GmbH BV Lotzenäcker Amperestraat Hechingen KB Tiel The Germany Netherlands Tel.: Tel: +1(0) / Fax: 0 +1(0) / [email protected] [email protected]

14 Citrotek EMC-Temperature Test Chambers (bench top version) Based on CTS latest chamber generation with innovative technique and future-oriented design. Standard-Version of the product line T-XX/XXX-EMC : Multicolour touch panel / 2 Bit Controller Minimum noise level RS 22 interface / Ethernet interface Potential free contact for malfunction signal Single-hand operated door handle, lockable Entry module on the right side EMC damping up to 82dB, better that db on averaged in the range from 0, to GHz Your benefits: Test space capacity in litres: 2 / 0 Temperature range: -0 C / + C; - C / + C Complies with current CE and EMC regulation Use of environmentally friendly materials and refrigerants Service-friendly construction simple user-friendly operation Optimized parameters for highest testing precision

15 EMC-Temperature Test Chambers (bench top version) series T-0 and T- 2 and 0 Ltr. Type T -0/2 T-0/0 T -/0 Test space litres appr Test space dimensions height mm, appr. 00 width mm, appr. 0 depth mm, appr Overall dimensions height mm, appr width mm, appr. 0 0 depth mm, appr Design bench top cabinet Temperature tests Temperature range C -0/+ -0/+ -/+ Temp. change rate cooling T-0/... K/min, acc IEC T-70/... K/min Temp. change rate heating K/min 8 acc IEC max. thermal load at +20 C W Temperature fluctuation K ± 0, / ± 1 temporally Nominal voltage 20 V +% -%, 1/N, 0 Hz Nominal power kw, appr. 1,9 1,9 2, Refrigeration units Weight kg, appr All figures are average values which have been obtained at a temperature of +2 C, without test specimens, without thermal load and without accessories. The max. thermal load and the cooling/heating gradients are listed with a blank entry module without any lead through. The maximum test temperature can been limited to 8 C, as some lead through will be damaged above this temperature. Design: Control: Microprocessor control and monitoring system Test space: Stainless steel grade 1.01 Refrigerants: Chloride free, hermetically sealed Options: Entry module in left side too Rack incl. 1 shelf Table with height 0 or mm Sub-zero module heater USB, D-sub, DC and SMA lead through add. Pt 0 for temperature measuring on test specimen alternative reversible to controller function Other chamber sizes and Options on request. We are producing a lot of different entry modules, based on customer unique requirements: 9 & 2 pole D-sub connector, SMA 2, single pole DC lead-troughs and a filtered USB2.0 lead-trough, fitted with a female plug type A and B. The USB including the sub-zero heater option, which maintains a temperature on the outside of the module, between + and +2 C and are preventing water and ice to build up, due to the thermal conductivity of the USB lead-trough. We reserve the right to make alterations due to technical development. Ver. 1.0//20 air dryer system Temperature protection for test-specimen CID software for programming and documentation variable air speed in the test space RS 22 interface changeable to USB USB - interface Standards: NT ELEC 00 Citrotek ApS Jespervej 0 Hillerød Denmark Tel.: + 82 Fax: [email protected]

16 CTS-Software CID-Pro.02 Operating system has never been so simple and user-friendly! Status Overview The new CID-Pro.02 is impressive for its easy and self-explanatory operation. All functions are menu driven and shown as symbols. In addition, substantial amounts of information from the unit are displayed and can be partially edited. Displays all connected units (chamber Displays all functions via symbols and names and status). menu bars. All symbols also contain a tool Displays all analogue and digital channels text-description. for any selected unit. Short but significant reports listing for all Displays status information for the selec- units. ted unit (automatic or manual operation, The chamber name is easily editable to error reports). meet requirements. Dynamic contextual screen set up elimi- Language can be changed during running nation of unnecessary or confusing time to either German, English or Czech. elements. Help as PDF format.

17 Editor Create your test cycle programs simply and easily. The new extended CID-Pro.02-Editor has many helpful functions making its use even easier, e.g. copy and past lines or line-blocks, calculate gradients exactly or save programs as template-modules. Create, change or delete the test cycle Copy lines or whole blocks and paste programs. them back again. Define value lines, loops, conditional Create or shift a point in the graphics with jumps or subprograms in the test program. double click on the new point. Set the time base of a program: Loads the last test program opened. Seconds, minutes or hours. Zoom to 20 levels. Zoom a specific area to set a value more Save programs as templates that can be accurately. pasted back as modules. Display all functions via symbols and menu Define a fixed gradient for a point bars. All symbols contain a tool textdescription. Detailed information of all channel values for the selected lines. -K/min cooling or K/min heating. PDF printout e.g.

18 Graphical measurement data evaluation A record of the test cycle program can be created storing all analogue and digital channels. This data can be evaluated and the results imported into Microsoft Excel if required. Display complete measurement results. Standard-configuration for the display of Hide channels which are not to be dis- analogue and digital channels is selectale: played. The first analogue and digital channels Difference and duration can be calculated have standard-set-actual-colours. (evaluation with two cursors on the graph). The last measured results opened are Select real time displays (date and time) or loaded. relative information (e.g. minutes). Zoom to 20 levels. Zoom a selected area to carry out more Extended search for measuring files. accurate evaluations. Measured files for the same configurations The scaling of analogue channels can can be combined. be displayed on the right or left in the Optimized Microsoft Excel export func- graphic zone. tion with user changeable options. Display all functions via symbols and menu PDF printout or logging bars. All symbols contain a tool text- Show measurement results in a table description. (complete or within cursor positions). Also display the cursor in the digital channels.

19 Visualising With the new menus, there is the option to visually display the layout of your units with site layout background photos and pictures of the individual setups. Units can be configured with user-defined sizes, position and appearance. Key information is displayed when the cursor is moved over a chamber. Networking Communication to the setup is freely configurable through RS22, RS8 or a network. Additionally, an online monitoring function is provided for other computers on the network. Special menus for Temperature Shock-Test-Cabinets A particularly clear display of the configuration with the special shock-test menu. The heating chamber, lower cold chamber or lift cage temperature all information at a glance. With the shock test editor, standard shock test programs can be easily created. Supporting operating systems Microsoft Windows 8, 7, Vista, XP (2- and bit), Windows SP CTS GmbH Lotzenäcker 21 Tel.: / Hechingen Germany Fax: / [email protected]