FONET adapter opsætning for HT286 Du kan finde adapterens IP-adresse ved at løfte røret på telefonen og taste 3 stjerner Når du høre en engelsk stemme taster du 2 stjerner Hvorefter adressen bliver oplæst på engelsk Eksempel: 19216814 Du indtaster så følgende i din browser: http://19216814 Derved får du følgende billede hvor du indtaster: admin som password Du kommer så ind til nedenstående opsætning Dine personlige parametre er: SIP User ID: Brugernavn (findes på Mine Sider under Lokalnumre) Authenticate ID: Brugernavn (findes på Mine Sider under Lokalnumre) Authenticate Password: Adgangskode (findes på Mine Sider under Lokalnumre) Name: Dit navn Caller ID Scheme: Kan sættes alt efter hvilken telefon du tilslutter Husk! Når du har foretaget ændringer, skal du gå nederst på siden og trykke på : Update Gå derefter ind igen og tryk : Reboot Efter ca 3 sekunder skal den røde lampe stoppe med at blinke og du kan foretage opkald Har du en bredbåndsforbindelse på min 256x256, kan du med fordel vælge PCMA som første valg i: Preferred Vocoder: Choice 1 Grandstream Device Configuration Password Login All Rights Reserved Grandstream Networks, Inc 25
Grandstream Device Configuration STATUS BASIC SETTINGS ADVANCED SETTINGS End User Password: IP Address: (purposely not displayed for security protection) dynamically assigned via DHCP (default) or PPPoE (will attempt PPPoE if DHCP fails and following is non-blank) PPPoE account ID: PPPoE password: Preferred DNS server: Time Zone: statically configured as: IP Address: 192 168 Subnet Mask: Default Router: DNS Server 1: DNS Server 2: 16 GMT+1: (Paris, Amsterdam, Berlin, Rome, Vienna, Madrid, Warsaw, Brussels) Daylight Savings Time: Yes (if set to Yes, display time will be 1 hour ahead of normal time) Update All Rights Reserved Grandstream Networks, Inc 25
Grandstream Device Configuration STATUS BASIC SETTINGS ADVANCED SETTINGS MAC Address: B82C757 WAN IP Address: 192168143 Product Model: HT286 Software Version: Program-- 167 Bootloader-- 11 HTML-- 149 VOC-- 11 System Up Time: day(s) hour(s) 15 minute(s) Registered: Yes PPPoE Link Up: disabled NAT: detected NAT type is open Internet NAT Mapped IP: NAT Mapped Port: Total Inbound Calls: Total Outbound Calls: Total Missed Calls: Total Call Time (in minutes): Total SIP Message Sent: 3 Total SIP Message Received: 6 Total RTP Packet Sent: Total RTP Packet Received: Total RTP Packet Loss: All Rights Reserved Grandstream Networks, Inc 25
Grandstream Device Configuration STATUS BASIC SETTINGS ADVANCED SETTINGS Admin Password: SIP Server: Outbound Proxy: SIP User ID: Authenticate ID: Authenticate Password: Name: gw 1fonetdk Brugernavn Brugernavn Dit navn (purposely not displayed for security protection) (eg, sipmycompanycom, or IP address) (eg, proxymyprovidercom, or IP address, if any) (the user part of an SIP address) (can be identical to or different from SIP User ID) (purposely not displayed for security protection) (optional, eg, John Doe) Advanced Options: Preferred Vocoder: (in listed order) choice 1: choice 2: choice 3: choice 4: choice 5: choice 6: choice 7: current setting is " ilbc" current setting is " PCMA" current setting is " PCMU" current setting is " G729" current setting is " G723" current setting is " G726-32" current setting is " G728" G723 rate: 63kbps encoding rate 53kbps encoding rate ilbc frame size: 2ms 3ms
ilbc payload type: 99 (between 96 and 127, default is 97) Silence Suppression: Yes Voice Frames per TX: Fax Mode: Layer 3 QoS: Layer 2 QoS: 821Q/VLAN Tag Use DNS SRV: Yes User ID is phone number: Yes SIP Registration: Yes Unregister On Reboot: Yes 2 48 (up to 1/2/32/64 for G711/G726/G723/other codecs respectively) T38 (Auto Detect) Pass-Through (Diff-Serv or Precedence value) 821p priority value (-7) Register Expiration: 6 (in minutes default 1 hour, max 45 days) Early Dial: Yes (use "Yes" only if proxy supports 484 response) Dial Plan Prefix: Key Entry Timeout: 4 (this prefix string is added to each dialed number) (in seconds, default is 4 seconds) Use # as Dial Key: Yes (if set to Yes, "#" will function as the "(Re-)Dial" key) local SIP port: local RTP port: Use random port: NAT Traversal: 56 (default 56) 1 (124-65535, default 54) Yes
keep-alive interval: Use NAT IP 2 Yes, STUN server is: (URI or IP:port) (in seconds, default 2 seconds) (if specified, this IP address is used in SIP/SDP message) Proxy-Require: Firmware Upgrade: Via TFTP Server (if specified, the content will appear in Proxy-Require header) 129 142 224 251 SUBSCRIBE for MWI: Via HTTP Server Automatic HTTP Upgrade: Yes, check for upgrade every, do not send SUBSCRIBE for Message Waiting Indication 7 days (default 7 days) Yes, send periodical SUBSCRIBE for Message Waiting Indication Offhook Auto-Dial: Enable Call Features: Disable Call-Waiting: (User ID/extension to dial automatically when offhook) Yes (if Yes, Call Forwarding & Call-Waiting-Disable are supported locally) Yes Send DTMF: in-audio via RTP (RFC2833) via SIP INFO DTMF Payload Type: 11 Send Flash Event: Yes (Flash will be sent as a DTMF event if set to Yes) FXS Impedance: Caller ID Scheme: current setting is " CTR21 (27 Ohm + 75 Ohm 15nF)" current setting is " Denmark-DTMF" Onhook Voltage: current setting is " 48V" Polarity Reversal: Yes (reverse polarity upon call establishment and termination)
NTP Server: ntp1teledk (URI or IP address) Send Anonymous: Yes (caller ID will be blocked if set to Yes) Lock keypad update: Yes (configuration update via keypad is disabled if set to Yes) Syslog Server: Syslog Level: current setting is "NONE" Update All Rights Reserved Grandstream Networks, Inc 25