Ships and marine technology Navigation Daylight signalling lamps

Relaterede dokumenter
Informationsteknologi Åben distribueret databehandling Referencemodel: Arkitektonisk semantik Tillæg 1: Computerbaserede formler

Mekaniske vibrationer Vurdering af maskinvibrationer ved måling på ikkeroterende dele Del 1: Generelle retningslinjer

Jordbrug Traktorer Bagmonteret trepunktsophæng Kategori 1N, 1, 2N, 2, 3N, 3, 4N og 4

Marksprøjter Sprøjtedyser Farvekode til identifikation

Ships and marine technology Position-indicating lights for life-saving appliances Testing, inspection and marking of production units

Malinger og lakker Bestemmelse af bestandighed mod cykliske korrosionsbetingelser Del 1: Vådt (salttåge)/tørt/fugtigt

Sensorisk analyse Metodologi Sekventiel analyse

Compressed air Part 1: Contaminants and purity classes

Technical drawings General principles of presentation Part 1: Introduction and index

Skibs- og marineteknologi Liste over maritime standarder

Sensorisk analyse Retningslinjer for brug af kvantitative responsskalaer

Optik og optiske instrumenter Medicinske endoskoper og endoskopitilbehør Del 5: Bestemmelse af optisk opløsning af stive endoskoper med optik

Motorkøretøjer Fartskriversystemer Del 2: Elektrisk grænseflade med optageenhed

Foderstoffer Bestemmelse af råaske

Jordbrug Traktorer Bagmonteret trepunktsophæng Kategori 1N, 1, 2N, 2, 3N, 3, 4N og 4

Teknisk produktdokumentation Dokumenttyper

Støj fra værktøjsmaskiner Driftsbetingelser for metalskæremaskiner

Teknisk tegning Grafiske skemasymboler Del 1: Generel information og overordnede indekser

Teknisk tegning Almene tegneregler Del 50: Grundlæggende regler for angivelse af områder på snitafbildninger og snit

Beskyttelsesbeklædning til beskyttelse mod kemikalier Klassificering, mærkning og krav til ydeevne

Hjælpemidler til stomi og inkontinens Udskylningssæt Krav og prøvningsmetoder

Informationsteknologi Skærmikoner og -symboler til personligt, mobilt kommunikationsudstyr

Kirurgiske implantater Hydroxyapatit Del 2: Belægninger af hydroxyapatit

Teknisk tegning Almene tegneregler Del 25: Linjer på skibsbygningstegninger

Kvalitetsstyringssystemer Vejledning for konfigurationsstyring

Ships and marine technology Computer applications Shipboard loading instruments

Informationsteknologi Multimedierammestruktur

Ships and marine technology Electric rudder angle indicators

Skibsbyggeri og marine konstruktioner Dæksmaskineri Terminologi og symboler

Specifikationer for processkemaer til procesindustrien Del 1: Generelle regler

Informationsteknologi Meddelelseshåndteringssystemer (MHS) Samarbejde med på internet

Skibs- og marineteknologi Tegninger til brandsikkerhed Angivelse af brandklasser opdelt efter brandsektioner for skibe og hurtiggående fartøjer

Software- og systemudvikling Højniveau-petrinet Del 1: Begreber, definitioner og grafiske tegnesystemer

Teknisk tegning Almene tegneregler Del 40: Grundlæggende regler for snitafbildninger og snit

Reaction-to-fire tests Guidance on the choice of substrates for building and transport products

Informationsteknologi Multimedieanvendelsesformat (MPEG-A) Del 2: Anvendelsesformat for MPEGmusikafspiller

Informationsteknologi Sikkerhedsteknikker. Del 3: Dedikerede hashfunktioner

Foderstoffer. Bestemmelse af fedtindhold

Fritidsdykkerservice Krav til snorkel/dykkerledelse

Kirurgiske implantater Intramedullære

Optik og optiske instrumenter Medicinske endoskoper og endoskopitilbehør Del 3: Bestemmelse af synsfelt og synsretning for endoskoper med optik

Kød og kødprodukter. Måling af ph-værdi. Referencemetode

Access panels in market, opinion and social research Vocabulary and service requirements

Kirurgiske implantater Delvis og hel hofteledsprotese Del 2: Ledflader lavet af metalliske og keramiske materialer og plastmaterialer

Kirurgiske implantater Intramedullære

Ydeevne for udstyr til genvinding og/eller genanvendelse af kølemiddel

Fritidsdykkerservice Krav til snorkel/dykkerledere

Mikrobiologisk undersøgelse af fødevarer og foderstoffer Bestemmelse af vandaktivitet

Plast Eksponeringsmetoder til laboratorielyskilder Del 3: Fluorescerende UV-lamper

Yogurt Determination of total solids content (Reference method)

Plast-aluminium-kapsler til infusionsflasker og injektionshætteglas Krav og prøvningsmetoder

Mælk Bestemmelse af indhold af kasein-nitrogen Del 1: Indirekte metode (referencemetode)

Identifikationskort Integrerede kredsløb Del 11: Personlig verifikation gennem biometrisk metode

Kirurgiske implantater Knoglesøm og knogletråd af metallisk materiale Del 1: Generelle krav

Dansk standard DS/ISO Soil quality Sampling Part 4: Guidance on the procedure for investigation of natural, near-natural and cultivated sites

Information and documentation Boxes, file covers and other enclosures, made from cellulosic materials, for storage of paper and parchment documents

Textiler Prøvningsmetode til bedømmelse af vævet stofs glathed efter rensning

Acoustics Description, measurement and assessment of environmental noise Part 2: Determination of environmental noise levels

Crop protection equipment Field measurement of spray distribution in tree and bush crops

Informationsteknologi Automatisk identifikation og datafangstteknikker Kode 128 stregkode symbologispecifikation

Dansk standard DS/ISO 15096

Textiler Prøvningsmetode til bedømmelse af pressefolder i vævet stof efter rensning

Fast mineralsk brændsel Koks Bestemmelse af indholdet af fugt i den generelle analyseprøve

Emissioner fra stationære kilder Bestemmelse af gas- og polycykliske aromatiske partikelfasekulbrinter Del 1: Prøvetagning

Elektronisk arkivering Del 1: Specifikationer vedrørende udvikling og drift af et informationssystem til sikring af elektroniske dokumenter

Statistisk fortolkning af data Del 7: Median Estimation og konfidensintervaller

Detektionsevne Del 4: Metodik til sammenligning af den mindste detekterbare værdi med en given værdi

Tobak Prøveudtagning af partier af råmateriale Generelle principper

COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/ISO/IEC /Amd. 1: CD-rom

Dansk standard DS/ISO 21307

Dansk standard DS/ISO Supply chain applications of RFID Product tagging. 1. udgave

Cardiovascular implants and artificial organs Cardiopulmonary bypass systems Arterial blood line filters

Informationsteknologi Sikkerhedsteknikker. (MAC) Del 3: Mekanismer, der anvender universel hashfunktion

Rulningslejer Tryklejer Grænsedimensioner,

Jordundersøgelser Bestemmelse af mulig salpeterdannelse i jord Hurtigprøve ved ammoniumoxidering

Stomiposer. Del 3: Bestemmelse af lugttransmission af colostomi- og ileostomiposer

Informationsteknologi Generisk kodning af levende billeder og tilknyttet lydinformation: Systemer

Informationsteknologi Universelt fleroktet kodet tegnsæt (UCS) Tillæg 2: N'Ko, Phags-pa, fønikiske og andre tegn

Sikkerhed for forlystelser og forlystelsesudstyr Del 3: Krav om eftersyn ved konstruktion, fremstilling, drift og brug

Informationsteknologi Multimedierammestruktur

COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/ISO 26825: cd-rom

Skibs- og marineteknologi Landgangsstiger

Akustik Lydisolering af rør, ventiler og flanger

Jordbrug Marksprøjter Testbane for marksprøjter

Traktorer til landbrug og skovbrug Sikkerhed Del 2: Smalsporede og små traktorer

Informationsteknologi 8-bit-kodede grafiske tegnsæt Del 7: Latinsk/græsk alfabet

Informationsteknologi Sikkerhedsteknikker Virkemåder for en n-bit blokalgoritme

Kirurgiske implantater Knogleplader af metal Huller, der passer til skruer med asymmetrisk gevind og sfærisk underside

Varmtvandspumper Prøvning og ydeevneangivelse Del 2: Vand-til-vand- og saltvandtil-vand-varmepumper

COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/ISO/IEC /Amd.2:2000

Miljømærkning Egendeklaration af miljøpåstande (Type II miljømærkning)

Aircraft De-icing/anti-icing fluids ISO type I

Informationsteknologi Sikkerhedsteknikker. Del 2: Vejledning i design og implementering af netværkssikkerhed

Koniske forbindelser med 6 % (Luer) studs for sprøjter, kanyler og andet særligt medicinsk udstyr Låsbare forbindelser

Information og dokumentation Translitteration af thailandske karakterer til latinske karakterer Del 2: Forenklet transskription af thailandsk sprog

Liquid milk Determination of acid-soluble betalactoglobulin content Reverse-phase HPLC-method

Softwareudvikling Produktevaluering Del 2: Planlægning og ledelse

Personal financial planning Requirements for personal financial planners

Elektronisk dokumentstyring Ordliste Del 1: Elektronisk billeddannelse af dokumenter

Maskinsikkerhed Risikovurdering Del 2: Praktisk vejledning og metodeeksempler

Transkript:

Dansk standard DS/ISO 25861 1. udgave 2007-12-21 Skibs- og marineteknologi Navigation Signallamper, dagslys Ships and marine technology Navigation Daylight signalling lamps

DS/ISO 25861 København DS projekt: M218667 ICS: 47.020.70 Første del af denne publikations betegnelse er: DS/ISO, hvilket betyder, at det er en international standard, der har status som dansk standard Denne publikations overensstemmelse er: IDT med: ISO 25861:2007. DS-publikationen er på engelsk. DS-publikationstyper Dansk Standard udgiver forskellige publikationstyper. Typen på denne publikation fremgår af forsiden. Der kan være tale om: Dansk standard standard, der er udarbejdet på nationalt niveau, eller som er baseret på et andet lands nationale standard, eller standard, der er udarbejdet på internationalt og/eller europæisk niveau, og som har fået status som dansk standard DS-information publikation, der er udarbejdet på nationalt niveau, og som ikke har opnået status som standard, eller publikation, der er udarbejdet på internationalt og/eller europæisk niveau, og som ikke har fået status som standard, fx en teknisk rapport, eller europæisk præstandard DS-håndbog samling af standarder, eventuelt suppleret med informativt materiale DS-hæfte publikation med informativt materiale Til disse publikationstyper kan endvidere udgives tillæg og rettelsesblade DS-publikationsform Publikationstyperne udgives i forskellig form som henholdsvis fuldtekstpublikation (publikationen er trykt i sin helhed) godkendelsesblad (publikationen leveres i kopi med et trykt DS-omslag) elektronisk (publikationen leveres på et elektronisk medie) DS-betegnelse Alle DS-publikationers betegnelse begynder med DS efterfulgt af et eller flere præfikser og et nr., fx DS 383, DS/EN 5414 osv. Hvis der efter nr. er angivet et A eller Cor, betyder det, enten at det er et tillæg eller et rettelsesblad til hovedstandarden, eller at det er indført i hovedstandarden. DS-betegnelse angives på forsiden. Overensstemmelse med anden publikation: Overensstemmelse kan enten være IDT, EQV, NEQ eller MOD IDT: Når publikationen er identisk med en given publikation. EQV: Når publikationen teknisk er i overensstemmelse med en given publikation, men præsentationen er ændret. NEQ: Når publikationen teknisk eller præsentationsmæssigt ikke er i overensstemmelse med en given standard, men udarbejdet på baggrund af denne. MOD: Når publikationen er modificeret i forhold til en given publikation.

INTERNATIONAL STANDARD ISO 25861 First edition 2007-12-01 Ships and marine technology Navigation Daylight signalling lamps Navires et technologie maritime Navigation Lampes de signalisation diurne Reference number ISO 25861:2007(E) ISO 2007

ISO 25861:2007(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO 2007 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyright@iso.org Web www.iso.org ii ISO 2007 All rights reserved

ISO 25861:2007(E) Contents Page Foreword... iv Introduction... v 1 Scope... 1 2 Normative references... 1 3 Terms and definitions... 1 4 Requirements... 2 4.1 Required functions and their availability [MSC.95(72), 1.2, 5.1]... 2 4.2 Switch-on and switch-off time [MSC.95(72), 5.2.6]... 2 4.3 Luminous intensity [MSC.95(72), 5.2]... 2 4.4 Chromaticity of the emitted light [MSC.95(72), 5.2.5]... 2 4.5 Malfunctions, warnings, alarms and indications [MSC.95(72), 5.3]... 2 4.6 Ergonomic and operational controls [MSC.95(72), 6]... 3 4.7 Durability and resistance to environmental conditions [MSC.95(72), 7.1]... 3 4.8 Electromagnetic compatibility (EMC)/interference [MSC.95(72), 7.2]... 3 4.9 Power supply [MSC.95(72), 7.3]... 3 4.10 Maintenance [MSC.95(72), 7.4]... 3 4.11 Back-up and fall-back arrangements [MSC.95(72), 8]... 4 4.12 Safety precautions [MSC.95(72), 9]... 4 4.13 Permanent operation and life duration... 4 4.14 Shock... 4 4.15 Pan and tilt ranges for fixed daylight signalling lamps... 4 4.16 Mounting... 4 5 Type approval tests... 4 5.1 Testing of the luminous intensity... 4 5.2 Testing of the chromaticity... 5 5.3 Measurement of the switch-on and the switch-off time... 5 5.4 Test of durability and resistance to environmental conditions... 5 5.5 Test of the capacity of the battery... 5 5.6 Maximum surface temperatures... 6 5.7 Pan and tilt ranges for fixed daylight signalling lamps... 6 5.8 Test of the lamp life duration... 6 5.9 Shock test... 6 6 Test report... 6 7 Documentation [MSC.95(72), 11]... 6 8 Marking and identification [MSC.95(72), 10]... 7 Bibliography... 8 ISO 2007 All rights reserved iii

ISO 25861:2007(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 25861 was prepared by Technical Committee ISO/TC 8, Ships and marine technology, Subcommittee SC 6, Navigation. iv ISO 2007 All rights reserved

ISO 25861:2007(E) Introduction ISO 17884 Ships and marine technology Searchlights for high-speed craft specifies many requirements that are also applicable for this International Standard, ISO 25861 Ships and marine technology Navigation Daylight signalling lamps. For a clearer structure, it is proposed for the future to merge these International Standards into one International Standard with a general part and an Annex A for searchlights and an Annex B for daylight signalling lamps. ISO 2007 All rights reserved v

INTERNATIONAL STANDARD ISO 25861:2007(E) Ships and marine technology Navigation Daylight signalling lamps 1 Scope This International Standard applies to daylight signalling lamps, which are required for certain ships pursuant to Chapter V of the International Convention for the Safety of Life at Sea (SOLAS), 1974, as amended, and Chapter 8 of the International Code of Safety for High-Speed Craft, in force, in accordance with the Performance Standards for Daylight Signalling Lamps [IMO Resolution MSC.95(72)]. Where the wording of this International Standard is identical to that in MSC.95(72), all such text is printed in italics and the resolution and paragraph numbers are indicated in brackets. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 17884, Ships and marine technology Searchlights for high-speed craft IEC 60529, Degrees of protection provided by enclosures (IP Code) IEC 60598-1, Luminaires Part 1: General requirements and tests IEC 60945, Maritime navigation and radiocommunication equipment and systems General requirements Methods of testing and required test results IMO Resolution A.694(17), General requirements for shipborne radio equipment forming part of the Global maritime distress and information system (GMDSS) and for electronic navigational aids IMO Resolution A.813(19), General requirements for electromagnetic compatibility (EMC) for all electrical and electronic ship's equipment IMO Resolution MSC.95(72), Performance standards for daylight signalling lamps 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 17884 and the following apply. NOTE The IMO-used expressions half angle of divergence and tenth angle of divergence are synonymous to half peak divergence and tenth peak divergence. 3.1 daylight signalling lamps lamps suitable for transmitting white light signals to an observer by focused light beams which may be fixed or portable [MSC.95(72), 4] ISO 2007 All rights reserved 1