Dansk standard DS/ISO 5489 1. udgave 2008-04-21 Skibs- og marineteknologi Landgangsstiger Ships and marine technology Embarkation ladders
DS/ISO 5489 København DS projekt: 55057 ICS: 47.020.50 Første del af denne publikations betegnelse er: DS/ISO, hvilket betyder, at det er en international standard, der har status som dansk standard Denne publikations overensstemmelse er: IDT med: ISO 5489:2008. DS-publikationen er på engelsk. DS-publikationstyper Dansk Standard udgiver forskellige publikationstyper. Typen på denne publikation fremgår af forsiden. Der kan være tale om: Dansk standard standard, der er udarbejdet på nationalt niveau, eller som er baseret på et andet lands nationale standard, eller standard, der er udarbejdet på internationalt og/eller europæisk niveau, og som har fået status som dansk standard DS-information publikation, der er udarbejdet på nationalt niveau, og som ikke har opnået status som standard, eller publikation, der er udarbejdet på internationalt og/eller europæisk niveau, og som ikke har fået status som standard, fx en teknisk rapport, eller europæisk præstandard DS-håndbog samling af standarder, eventuelt suppleret med informativt materiale DS-hæfte publikation med informativt materiale Til disse publikationstyper kan endvidere udgives tillæg og rettelsesblade DS-publikationsform Publikationstyperne udgives i forskellig form som henholdsvis fuldtekstpublikation (publikationen er trykt i sin helhed) godkendelsesblad (publikationen leveres i kopi med et trykt DS-omslag) elektronisk (publikationen leveres på et elektronisk medie) DS-betegnelse Alle DS-publikationers betegnelse begynder med DS efterfulgt af et eller flere præfikser og et nr., fx DS 383, DS/EN 5414 osv. Hvis der efter nr. er angivet et A eller Cor, betyder det, enten at det er et tillæg eller et rettelsesblad til hovedstandarden, eller at det er indført i hovedstandarden. DS-betegnelse angives på forsiden. Overensstemmelse med anden publikation: Overensstemmelse kan enten være IDT, EQV, NEQ eller MOD IDT: Når publikationen er identisk med en given publikation. EQV: Når publikationen teknisk er i overensstemmelse med en given publikation, men præsentationen er ændret. NEQ: Når publikationen teknisk eller præsentationsmæssigt ikke er i overensstemmelse med en given standard, men udarbejdet på baggrund af denne. MOD: Når publikationen er modificeret i forhold til en given publikation.
INTERNATIONAL STANDARD ISO 5489 Third edition 2008-03-01 Ships and marine technology Embarkation ladders Navires et technologie marine Échelles d'embarcation Reference number ISO 5489:2008(E). ISO 2008
ISO 5489:2008(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO 2008 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyright@iso.org Web www.iso.org ii ISO 2008 All rights reserved
ISO 5489:2008(E) Contents Page Foreword... iv Introduction... v 1 Scope...1 2 Normative references...1 3 Materials...1 3.1 Wooden parts...1 3.2 Side ropes...1 3.3 Metallic materials...2 3.4 Mechanical fastening devices...2 3.5 Plastic materials...2 3.6 Quality of materials...2 3.7 Rope seizing...2 4 Construction...2 5 Testing for approval...6 6 Designation...8 7 Marking...9 8 Production tests and inspections...9 9 Maintenance...9 Annex A (informative) Recommended production tests and inspections...10 ISO 2008 All rights reserved iii
ISO 5489:2008(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 5489 was prepared by Technical Committee ISO/TC 8, Ships and marine technology, Subcommittee SC 1, Lifesaving and fire protection. This third edition cancels and replaces the second edition (ISO 5489:1986) of which it constitutes a complete revision in order to take into account new designs and manufacturing methods for embarkation ladders which have entered the market since 1986. iv ISO 2008 All rights reserved
ISO 5489:2008(E) Introduction This International Standard is intended to supplement existing International Maritime Organization (IMO) requirements for embarkation ladders. Since IMO instruments do not include specific requirements for prototype testing of embarkation ladders for approval, those tests included in this International Standard are in excess of the existing IMO requirements. The inclusion of these tests was considered necessary in order to provide a means of ensuring conformance of embarkation ladders with the performance requirements prescribed in IMO instruments and in this International Standard. ISO 2008 All rights reserved v
INTERNATIONAL STANDARD ISO 5489:2008(E) Ships and marine technology Embarkation ladders 1 Scope This International Standard specifies requirements for a ship s embarkation ladder that is provided to enable safe embarkation of waterborne survival craft along a vertical portion of the ship's hull. It is applicable to merchant ships required to carry embarkation ladders under Chapter III of the 1974 International Convention for the Safety of Life at Sea (SOLAS), as amended. National maritime safety administrations are urged to accept ladders complying with this International Standard on their ships, as complying fully with the requirements of SOLAS. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 209-1:1989, Wrought aluminium and aluminium alloys Chemical composition and forms of products Part 1: Chemical composition ISO 877:1994, Plastics Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors ISO 1461:1999, Hot dip galvanized coatings on fabricated iron and steel articles Specifications and test methods 3 Materials 3.1 Wooden parts Each wooden part shall be made of a hardwood (e.g. ash, oak, elm, beech, teak or apitong) free from knots. 3.2 Side ropes 3.2.1 Each side rope shall be mildew-resistant manila rope or a spun thermoset polyester rope with a polypropylene core of a colour that contrasts with the spun polyester. Each side rope shall have a breaking strength of at least 24 kn, and a nominal diameter of 18 mm (57 mm circumference). 3.2.2 Alternative side ropes of synthetic material may be used if they: a) meet the breaking strength and size requirements of 3.2.1; b) are at least as resistant to elongation under load as the standard ropes described in 3.2.1; c) have an exterior surface suitable for grasping with bare hands, similar to manila or spun polyester; d) are of a thermosetting polymer, resistant to deterioration from ultraviolet light; e) provide a visual indication of excessive wear, similar to the spun polyester/polypropylene construction described in 3.2.1. ISO 2008 All rights reserved 1