ZAXIS-3 series Short rear-end swing version
|
|
- Rebecca Kjær
- 8 år siden
- Visninger:
Transkript
1 ZAXIS-3 series Short rear-end swing version HYDRAULIC EXCAVATOR Model Code: ZX85US-3 Engine Rated Power: 39.4 kw (52.8 HP) Operating Weight: kg Backhoe Bucket: SAE, PCSA Heaped: m 3 CECE Heaped: m 3
2 The Power to Perform The ZAXIS-3 series is a new generation of excavators designed to provide more efficient power, productivity and improved operator comfort. By listening carefully to the wishes of the end-user, HITACHI not only understands your business, but also provides the reliable solutions you ve been looking for. NEW AND IMPROVED Performance: 5% higher production Comfort: Excellent visibility Enhanced controllability Lower noise level New equipment: Standard satellite communication system Standard theft deterrent system Rear view camera (optional) Reduced running costs: Lower fuel consumption per m 3 Improved durability and reliability 2
3 Productivity E-mode Speed sensing control Improved swing ability Improved mobility Improved blade crowding performance Page 4-5 Operator comfort High visibility inside cab Short stroke levers Comfort designed seat Improved controllability and operator comfort Page 6-7 Multi function monitor Maintenance support Theft deterrent system Rear view camera (optional) Page 8-9 Durability and reliability Strengthened upperstructure Strengthened undercarriage Strengthened front attachment Page Maintenance Conveniently located inspection points Extended oil and change intervals Parallel arrangement of the cooling pack Page Safety measures CRES II cab Cab right protection bars Pilot control shut-off lever Engine stop knob Page 14 Environment measures Array of low noise mechanisms Ecological design Page 15 Parts & Service Page 16 e-service Owner s Site Page 17 Specifications Page The new engine complies with the Emission Regulations EU Stage III A The advanced low noise design complies with the EU noise regulation 2000 / 14 / EC, STAGE II Notes: The pictures in this brochure show excavations with a 2.12 m arm and an optional blade attachment installed. Some of the pictures in this brochure show an unmanned machine with attachments in an operating position. These were taken for demonstration purposes only and the actions shown are not recommended under normal operating conditions. 3
4 Boosted Productivity Short-tail-swing makes possible efficient operations in various confined worksites. Efficient hydraulic system and new intercooled turbocharger diesel engine were developed for ZAXIS-3. These advanced technologies are at work to yield bigger output with higher fuel efficiency. 180 Swing mm Min. swing radius mm Rear-end swing radius mm -460 mm (vs. ZX70LC-3) Applicable in Various Job Sites Short mm rear-end swing radius promises efficient operations in confined spaces. - Rear-end swing radius is shorter than of ZX70LC-3. - Short mm minimum swing radius. Stability Exceeds Standard Model Stability is increased by using the exclusive US weighted counterweight. - Stability: 17% increase (vs. ZX70LC-3) 4 * In fi gure, machines are expressed by model codes for presentation. The photo shows an excavator with a 1.62 m arm installed.
5 More production, less fuel consumption Increased Production A combination of the hydraulic system and new intercooled turbocharger engine allows the efficient use of hydraulic pressure to increase speeds of actuators and boost production with higher fuel efficiency. The productivity is increased 5% in comparison to previous model ZAXIS-1. E-mode The E mode and P mode can be selected to suit job needs. The E mode can save fuel consumption by up to 12% compared to the previous model s P mode, while yielding similar production. Increase in Swing Torque and Traction Force Swing torque and traction force are increased significantly. - Swing torque 9% UP - Traction force 8% UP Efficient hydraulic control Hydraulic System Speed Sensing Control The Hydraulic System elicits more user satisfaction than other models due to its greater operator comfort and ease of operability. During arm roll-in operations, the hydraulics of 3 pumps are merged, allowing for quick leveling operations. Depending on the operations, usage of the 3 pumps are automatically switched, offering excellent operability. It supports stability and combined operability, such as speed balance and land clearing. A speed sensing system is used for hydraulic horsepower control. The hydraulic pump delivery flow, which varies with changes in engine RPM according to the load, is controlled. This means efficient use of engine horsepower, and also contributes to a reduction in fuel consumption. Development concept of new engine Intercooled Turbocharger Engine Cooled EGR* System The new intercooled turbocharger Exhaust gas is partially mixed with engine is developed and built to intake air to lower combustion comply with the rigorous Emission temperature for reducing NOx and Regulations enforced in 2008 in U.S fuel consumption. What s more, the and EU. This new engine contributes EGR cooler cools down exhaust gas to to environmental preservation. At the increase air concentration for complete same time it realizes high durability and combustion, reducing PM** (diesel low fuel consumption by adapting the plume). latest advanced engine technology. *Exhaust Gas Recirculation **Particulate Matter Improved crowding performance Reshaped Blade (optional) The blade is reshaped for crowding without loss. Coolant EGR Cooler Control Unit EGR Control Valve Cylinder Head Intake Exhaust 5
6 A New Standard in Operator Comfort The operator's seat of the ZAXIS-3 series gives the operator an excellent view of the jobsite. Ample legroom, short stroke levers and a large seat ensure optimum working conditions for the operator during long hours. 6 *The photo shows an excavator with a optional blade (blade lever) installed.
7 *The photo shows an excavator with a optional blade (blade lever) installed. The ZAXIS-3 series cab has been redesigned to meet demands of customers. From the operator s seat the operator has an excellent view of the jobsite. On the widescreen color LCD monitor the operator can see machine conditions and with the rear view camera (optional), what is behind the machine. Ample legroom, short stroke levers and a suspension seat with heating ensure optimum working conditions. The seat features horizontal, vertical adjustments and has a backrest contoured for comfort, with a HITACHI logo. Wide adjustable armrests and a retractable seat belt are included. Short stroke levers allow for continuous operation with less fatigue. Three switches on the lever (optional) can be set to operate attachments other than buckets. The cab is pressurized to keep out dust. Noise and vibrations are kept to a minimum due to the elastic mounts, filled with silicone oil, the cab rests on. Visibility is improved especially for the right downward view. Sliding windows on the front and side enable direct communication between operator and other workers. Visibility is increased with the optional blade. The blade is shaped so that the operator can visually confi rm that the blade is in contact with the ground. A fl at floor allows for easy cleaning. Ergonomic controls and switches, fully automatic air conditioner and a radio complete the package. 7
8 Embedded Information Technology The ZAXIS-3 series is equipped with a widescreen color LCD monitor with adjustable contrast for day and night shifts. With the monitor the operator can check maintenance intervals and connect to the rear view camera (optional). A theft deterrent system and multi-language selection is also available. Multi function monitor The color LCD monitor, located in the cab, indicates coolant temperature, fuel level, and maintenance data. The display can also be adjusted to day or night shift. Maintenance support Multi-language selection Replacement timing of hydraulic oil and fuel filters is alerted to the operator through the LCD monitor according to the schedule preset by the user each time when turning the key switch. The scheduled maintenance can prevent the failure of the machine. The menu allows selection from 12 languages. 8
9 Rear view camera (optional) Theft deterrent system The electronic immobiliser requires the entry of a password to the multifunctional monitor each time when starting the engine to prevent theft and vandalism. The widescreen color LCD, in tandem with the rear view camera on the counterweight, provides a convenient view of the area behind the unit. The rear view camera automatically works when travelling backward, and can also be manually turned on with a select switch on the monitor. ZX85US-3 off-set front 9
10 A Solid Base for a Long Life HITACHI s technology is built on a wealth of experience and know-how from a variety of demanding conditions around the world. The undercarriage of the ZAXIS 85US has become much stronger. Improved construction and enlarged box sections make this machine more durable. 10
11 Strengthened Upperstructure The new ZAXIS excavator now has a D-section frame skirt, which was highly acclaimed in previous models. As a result of this D-section frame skirt, rigidity and durability in the upper machinery are greatly improved. Adding D-section frame skirt D-Section Frame Skirt Strengthened X beam One-piece upper and lower plates are utilized instead of conventional 4-piece plates, eliminating welds. This increases strength of the track frame. Upper plate (one-piece) Lower plate (one-piece) Strengthened front attachment At arm-bucket joint, the arm top is hardened with WC thermal spraying (Tungsten- Carbide) for greater wear resistance at its contact surface with bucket, reducing jerking. WC Thermal spraying 11
12 Simplified Maintenance The ZAXIS-3 series meet customer demands for simplified maintenance. Regular maintenance is the key for keeping equipment in top condition, which can help to prevent costly downtime. In addition, a regular serviced machine has higher residual value. There are many service features to be found on the ZAXIS-3 series. 12
13 Conveniently located inspection points Wide doors give access, from ground level, to the fuel filter, water separator and engine oil filter. Oil Filter Fuel Filter Water Separator Parallel arrangement of the cooling pack The oil cooler and radiator are laid out in a parallel arrangement, instead of the conventional inline arrangement. This parallel arrangement is significantly easier to clean around the radiator. Easy removal of debris and dirt from blower, etc. Engine Oil Cooler Radiator Intercooler Parallel Arrangement Extended oil and filter change intervals Front Pin Lubricating Intervals and Consumables Replacement New ZAXIS 85US Lubricant Bucket 500 h Boom Foot 500 h Front 500 h Consumables Engine Oil 500 h Engine Oil Filter 500 h Hydraulic Oil h Hydraulic Oil Filter h The fuel tank is a 135L short-tail-swing version, the same capacity as that used in standard equipment. With 135L, refueling doesn t have to be done as often. The oil and filter change intervals have been extended considerably, reducing maintenance time and expenses. Engine oil consumption is lower. Hydraulic oil can be used up to hours. Fuel Filter 500 h 13
14 Safety Features Ensuring the safety of the operator and other workers on the jobsite is an important concern for HITACHI. That is why the ZAXIS-3 series has a number of safety features including a new reinforced cab and shut-off mechanisms for engine and pilot controls. CRES II cab The CRES II cab is designed to help with just in case protection for the operator. Safety in case of tipping is improved. The cab top, for instance, can withstand about 1.4 times conventional load when side load is applied to the cab top until its deformation reaches 200 mm. withstanding load: 1.4-fold increase Additional features Cab right protection bars Evacuation hammer Engine stop knob Pilot control shut-off lever OPG top guard, Level ll (optional) Retractable seat belt Other features include a retractable seat belt, evacuation hammer and emergency engine stop knob. A shut-off lever for pilot control helps to prevent unintentional movements. In addition a Falling Object Protective Structure (OPG top guard, Level II) guard is optionally available. For the cab windows there is a choice of laminated or tempered glass. 14
15 Environmental Features HITACHI acts responsibly when it comes to the environment. Our production facilities have ISO certification. The HITACHI machine is lead free and has a low-noise design, therefore HITACHI customers get one of the most environmentally considerate hydraulic excavators available today. A cleaner machine The ZAXIS-3 series is equipped with a clean but powerful engine to comply with Tier 3, and Stage III A. An engine emission regulations effective in the U.S. EPA and European Union from Exhaust gas is partly re-combusted to reduce particulate matter (PM) output and lower nitrogen oxide (NOx) levels. A quieter machine Many features contribute to noise reduction in the new ZAXIS. Firstly, the fan with linear clutch responds to the engine temperature: the rotational speed of the fan increases smoothly as the temperature of the engine increases. This control reduces noise in light-load operations, as the fan rotational speed does not increase beyond what is necessary. This also means that no load is placed on the engine, reducing fuel consumption. The cylinder block and ladder frame in the new engine are strengthened, reducing engine noise. Due to intercooled turbo charging and the optimization of fuel injection timing, exhaust noise is reduced by 10 db (compared to previous models). A recyclable machine All resin parts are marked to facilitate recycling. The machine is completely leadfree. The radiator and oil cooler are made from aluminium and all wires are leadless. In addition, biodegradable hydraulic oil is available for jobsites where special environmental care is required. 15
16 Reservedele & Service I årenes løb har vi oparbejdet erfaring fra ét de mest konkurrenceprægede servicemarkeder i verden - nemlig Japan. Ved hjælp af vores know-how med hensyn til at handle direkte med vores kunder har vi skabt et verdensomspændende supportsystem, der er yderst kompetent. Reservedele HITACHI tilbyder ægte reservedele af høj kvalitet. Vi garanterer, at disse reservedele har høj ydeevne og et langt liv. Ve håndterer ca. 1 million reservedelsnumre over hele verden. De er alle præcist tilpasset dit HITACHI-udstyr. Hitachi har et globalt reservedelsnetværk, der sikrer dig hurtigst mulig levering. Vi har mere end 150 forhandlere verden over, og din lokale forhandler har oftest de nødvendige reservedele på lager. I modsat fald sikrer fire fuldt lagerførende reservedelscentre en hurtig levering af delen. Hvis en forhandler ikke har en bestemt reservedel, kan han bestille den fra fire fuldt forsynede reservedelslagre, som er fordelt rundt i verden. Disse distributionscentre er alle bundet sammen af et onlinesystem, som giver dem adgang til fælles information om lagerbeholdning, såsom antal og typer af tilgængelige dele. Lagrene, som forsynes fra et reservedelscenter i Japan, sørger for at minimere leveringstid og gør det muligt for dig at få dine reservedele så effektivt og hurtigt som muligt. Service Det er vores mål at holde vore kunders maskiner i optimal stand. For at nå dette mål har vi over 150 forhandlere placeret rundt omkring i hele verden. De har højtuddannede teknikere, og de tilbyder en række supportprogrammer. HITACHI har et enestående garantiprogram, som hedder HITACHI Extended Life Program, eller HELP. For at minimere stilstandstid under fejlfinding har vi udviklet et PDA-baseret fejlfindingssystem, der har fået navnet Dr.ZX. God service er uundværlig for at holde vores kunders udstyr i topform. Vi tror på, at personaleuddannelse er nøglen til at yde den bedste service. Spørg venligst den nærmeste HITACHIforhandler, hvis du ønsker flere oplysninger om reservedele og/eller service. Ikke alle programmer og/eller services fås ikke på alle markeder eller i alle områder. 16
17 Fjern-flådestyring med Global e-service Reducer indsatsen og omkostningerne ved vedligeholdelse af din maskinflåde med Global e-service. Få den nyeste information om hver enkelt af dine maskiner online - i dit kontor. Global e-service funktioner Drift Fjernadgang til al relevant driftsinformation såsom daglige driftstimer og brændstofniveau såvel som historisk opsamlede oplysninger om temperaturer og tryk. Kontrollér og overvåg hver maskine fra dit kontor Udvidet service fra din lokale forhandler Aktuel geografisk location for hver enkelt af dine maskiner Vedligeholdelse For hver maskine vil vedligeholdelseshistorik samt anbefalet vedligeholdelse blive vist på en gang, så det er muligt at udføre nøjagtig og effektiv vedligeholdelsesstyring af flåden. Global e-service er et online flådestyringsværktøj, som tilbydes af Hitachi til hver enkelt kunde. Det viser al driftsinformation og lokation for dine maskiner på en PC i dit kontor. Derved får du en ajourført oversigt over dine maskiner, så du kan opnå fuld flådekontrol. Hver maskine sender regelmæssigt sine driftsdata derfra til en Hitachi-server. Dataene opsamles i serveren og bliver behandlet og stillet til rådighed for hver enkelt kunde over hele verden. Din maskininformation vil være tilgængelig for dig og din forhandler gennem en sikker internetforbindelse. Kommunikationsforbindelsen er i drift 24 timer i døgnet hver eneste dag i året. Det vil støtte din jobplanlægning, hjælpe dig med at vedligeholde din maskine og give din lokale forhandler mulighed for at udføre udvidet service og hjælp til fejlfinding. Det vil direkte bidrage til at nedbringe stilstandstiden og øge din flådes ydelse i forhold til omkostningerne. Mange ZAXIS-3 og ZW-maskiner vil have satellitkommunikation installeret som standardudstyr*, hvilket indebærer, at hver enkelt ejer kan drage direkte nytte af Global e-service. Din lokale forhandler vil kunne give dig adgang til Global e-service. Optimeret flådestyring Nøjagtig vedligeholdelsesplanlægning Jobplanlægningsværktøj Hurtig fejlfinding Lokation Ud over generelle GPS-funktioner, vil GISsystemet (Geographical Information System) ikke blot vise den geografiske position for hver maskine med øjeblikkelig identifikation af serienummer, det vil også gøre det muligt at søge på flere maskiner ved at bruge specifikke oplysninger om driftsinformation som søgekriterier. Kunde Antenne (GPRS) eller Maskine Hitachi Construction Machinery Group og forhandlere satellit Information Center, Hitachi Construction Machinery Hurtig adgang til information om fjerne maskiner Driftsinformation Informationsdeling Hurtig og relevant service Internet * (1) Satellitkommunikation kan være forbudt ifølge lokale bestemmelser (inklusive sikkerhedsbestemmelser) eller lovgivning i det land, hvor du ønsker et anvende den. Kontakt din Hitachi-forhandler for yderligere oplysninger. (2) Satellitkommunikation giver som udgangspunkt verdensomspændende dækning. Kontakt din lokale forhandler og få aktuelle oplysninger om adgang til satellitkommunikation i dit land eller på et bestemt arbejdssted. (3) Hvis overførsel af satellitsignalet bliver forhindret på nogen måde, vil satellitkommunikation måske ikke være mulig. (4) Kommunikationssystemet for driftsdata varierer afhængigt af model og produktionsdato. 17
18 SPECIFICATIONS ENGINE Model... Isuzu AU-4LE2X Type... 4-cycle water-cooled, direct injection Aspiration... Turbocharged, intercooled No. of cylinders... 4 Rated power ISO 9249, net kw (52.8 HP) at min -1 (rpm) EEC 80/1269, net kw (52.8 HP) at min -1 (rpm) SAE J1349, net kw (52.8 HP) at min -1 (rpm) Maximum torque N m (21.9 kgf m) at min -1 (rpm) Piston displacement L Bore and stroke mm x 96 mm Batteries... 2 x 12 V / 52 Ah HYDRAULIC SYSTEM Swing-independent 3-pump hydraulic system OHS (Optimum Hydraulic System) assures fully independent and combined operations Automatic 2-speed motor increases traction force and travel speed Engin speed sensing system Main pumps... 3 variable displacement axial piston pumps Maximum oil fl ow.. 2 x 79.2 L/min 1 x 61.6 L/min Pilot pump... 1 gear pump Maximum oil fl ow L/min Hydraulic Motors Travel... Swing... 2 variable displacement axial piston motors 1 axial piston motor Relief Valve Settings Implement circuit MPa (265 kgf/cm 2 ) Swing circuit MPa (255 kgf/cm 2 ) Travel circuit MPa (320 kgf/cm 2 ) Pilot circuit MPa (40 kgf/cm 2 ) Hydraulic Cylinders High-strength piston rods and tubes. Cylinder cushion mechanisms provided in boom and arm cylinders to absorb shock at stroke ends. Dimensions Quantity Bore Rod diameter UPPERSTRUCTURE Revolving Frame Welded sturdy box construction, using heavy-gauge steel plates for ruggedness. D-section frame for resistance to deformation. Swing Device Axial piston motor with planetary reduction gear is bathed in oil. Swing circle is single-row, shear-type ball bearing with induction-hardened internal gear. Internal gear and pinion gear are immersed in lubricant. Swing parking brake is spring-set/hydraulic-released disc type. Swing speed min -1 (rpm) Swing torque kn m (1 630 kgf m) Operator's Cab Independent spacious cab, mm wide by mm high, conforming to ISO* Standards. Reinforced glass windows on 4 sides for visibility. Front windows (upper and lower) can be opened. Reclining seat with armrests; adjustable with or without control levers. * International Standardization Organization UNDERCARRIAGE Tracks Tractor-type undercarriage. Welded track frame using selected materials. Side frame welded to track frame. Lubricated track rollers, idlers, and sprockets with fl oating seals. Track shoes with triple grousers made of induction-hardened rolled alloy. Heat-treated connecting pins with dirt seals. Hydraulic (grease) track adjusters with shock-absorbing recoil springs. Numbers of Rollers and Shoes on Each Side Upper rollers... 1 Lower rollers... 5 Track shoes Travel Device Each track driven by 2-speed axial piston motor through planetary reduction gear for counterrotation of the tracks. Sprockets are replaceable. Parking brake is spring-set/hydraulic-released disc type. Travel shockless relief valve built in travel motor absorbs shocks when stopping travel. Automatic transmission system: High-Low. Travel speeds... High: 0 to 5.0 km/h Low: 0 to 3.1 km/h Maximum traction force kn (7 240 kgf) Boom mm 65 mm Arm 1 95 mm 60 mm Bucket 1 85 mm 55 mm Off-Set (optional) mm 60 mm Gradeability... 70% (35 degree) continuous Hydraulic Filters Hydraulic circuits use high-quality hydraulic fi lters. A suction fi lter is incorporated in the suction line, and full-fl ow fi lters in the return line and swing/travel motor drain lines. CONTROLS Pilot controls. Hitachi's original shockless valve. Implement levers... 2 Travel levers with pedals... 2 Blade lever (optional)... 1 Off-set front pedal (optional)
19 WEIGHTS AND GROUND PRESSURE ZX85US-3 with Blade: Equipped with 3.72 m monoblock boom, 1.62 m arm and 0.28 m 3 (SAE, PCSA heaped) bucket. Shoe type Shoe width Operating weight Ground pressure Triple 450 mm kg 34 kpa (0.35 kgf/cm 2 ) grouser 600 mm kg 26 kpa (0.27 kgf/cm 2 ) Pad 450 mm kg 33 kpa (0.34 kgf/cm 2 ) Rubber 450 mm kg 33 kpa (0.34 kgf/cm 2 ) Flat 450 mm kg 34 kpa (0.35 kgf/cm 2 ) ZX85US-3 with Off-Set Front and Blade: Equipped with off-set front, 1.62 m arm and 0.28 m 3 (SAE, PCSA heaped) bucket. Shoe type Shoe width Operating weight Ground pressure Triple 450 mm kg 36 kpa (0.37 kgf/cm 2 ) grouser 600 mm kg 27 kpa (0.28 kgf/cm 2 ) Pad 450 mm kg 35 kpa (0.36 kgf/cm 2 ) Rubber 450 mm kg 35 kpa (0.36 kgf/cm 2 ) BACKHOE ATTACHMENTS Boom and arms are of welded, box-section design m monoblock boom, and 1.62 m arms are available. Buckets Capacity SAE, PCSA heaped Width without side cutters Weight 0.24 m mm 231 kg 0.27 m mm 251 kg 0.32 m mm 286 kg 0.38 m mm 306 kg SOUND LEVEL RESULTS (2000/14/EC) LwA: sound-power level of airborne noise LpA: sound level at operator's station Unit: db(a) LwA LpA ZX85US Flat 450 mm kg 36 kpa (0.37 kgf/cm 2 ) Weights of the basic machines [including kg counterweight and triple grouser shoes, excluding front-end attachment, blade, fuel, hydraulic oil, engine oil and coolant etc.] are: ZX85US kg with 450 mm shoes SERVICE REFILL CAPACITIES Fuel tank L Engine coolant L Engine oil L Travel device L (each side) Hydraulic system L Hydraulic oil tank L 19
20 SPECIFICATIONS DIMENSIONS ZX85US-3 A Distance between tumblers B Undercarriage length * C Counterweight clearance *760 D Rear-end swing radius D Rear-end length E Overall width of upperstructure F Overall height of cab * G Min. ground clearance *360 H Track gauge J Undercarriage width / K Overall width / L Overall length With 1.62 m arm With 2.11 m arm M Overall height of boom With 1.62 m arm Unit: mm With 2.11 m arm (2 690 without Bucket) * N Track height with triple grouser shoes 655 * Excluding track shoe lug G: Triple grouser shoe ZX85US-3 with Blade A Overall width of blade mm B Overall heigth of blade mm C Blade distance mm *D Max. raising height above ground mm *E Max. lowering depth from ground mm * Excluding track shoe lug meter Ground Line meter Unit: mm ZX85US-3 Arm length 1.62 m 2.12 m A Max. digging reach A Max. digging reach (on ground) B Max. digging depth B Max. digging depth (8' level) C Max. cutting height D Max. dumping height E Min. swing radius F Max. vertical wall G Min. swing radius height Bucket digging force ISO 55 kn (5 600 kgf) Bucket digging force SAE: PCSA 47 kn (4 800 kgf) Arm crowd force ISO 38 kn (3 900 kgf) 32 kn (3 300 kgf) Arm crowd force SAE: PCSA 36 kn (3 700 kgf) 31 kn (3 200 kgf) Excluding track shoe lug 20
21 DIMENSIONS: OFF-SET FRONT Unit: mm E L D/D ZX85US-3 A Distance between tumblers B Undercarriage length * C Counterweight clearance 760 F M D Rear-end swing radius I G H J,K N A B C D Rear-end length E Overall width of upperstructure F Overall height of cab * G Min. ground clearance *360 H Track gauge I Track shoe width G 450 / G 600 J Undercarriage width / K Overall width / L Overall length with 1.62 m arm M Overall height of boom with 1.62 m arm * N Track height with triple grouser shoes 655 * Excluding track shoe lug G: Triple grouser shoe WORKING RANGES: OFF-SET FRONT Unit: mm ZX85US-3 Arm length 1,62 m H Off-set distance 0 Max (1 150) A Max. digging reach G A Max. digging reach (on ground) B Max. digging depth B Max. digging depth (8 level) C Max. cutting height D Max. dumping height meter 9 E Min. swing radius Left: / Right: F Max. vertical wall G Left side off-set distance E H Right side off-set distance Bucket digging force ISO 55 kn (5 600 kgf) 6 Bucket digging force SAE: PCSA 47 kn (4 800 kgf) 5 Arm crowd force ISO 40 kn (4 100 kgf) C D Arm crowd force SAE: PCSA Excluding track shoe lug 38 kn (3 900 kgf) F B B A' A Ground Line meter 21
22 LIFTING CAPACITIES Notes: 1. Ratings are based on ISO Lifting capacity of the ZAXIS Series does not exceed 75% of tipping load with the machine on fi rm, level ground or 87% full hydraulic capacity. 3. The load point is the center-line of the bucket pivot mounting pin on the arm. 4. *Indicates load limited by hydraulic capacity m = Ground. A A: Load radius B: Load point height C: Lifting capacity C B ZX85US-3 Monoblock Boom: Blade (Down) Rating over-side or 360 degrees Rating over-front Unit: kg Conditions Load point height Load radius 1.5 m 3.0 m 4.5 m At max. reach meter Boom 3.72 m Arm 1.62 m Counterweight kg Grouser Shoe 450 mm 4.5 m *1 620 *1 620 *1 550 * m *2 270 *2 270 * * m * * * (Ground) * * * m *4 370 *4 370 * * m *2 300 * Conditions Load point height Load radius 1.5 m 3.0 m 4.5 m At max. reach meter Boom 3.72 m Arm 2.12 m Counterweight kg Grouser Shoe 450 mm 4.5 m *1 460 *1 460 *1 300 * m *1 870 *1 870 * * m * * * (Ground) * * * m *3 460 *3 460 * * * m *5 200 *5 200 * * ZX85US-3 Off-Set Front: Blade (Down) Unit: kg Conditions Load point height Load radius 1.5 m 3.0 m 4.5 m At max. reach meter Arm 1.62 m Counterweight kg Grouser Shoe 450 mm 4.5 m *1 600 *1 600 *1 600 * m *2 150 *2 150 * * m * * (Ground) * * * m *4 010 *4 010 * * m *1 920 *
23 EQUIPMENT STANDARD EQUIPMENT Standard equipment may vary by country, so please consult your Hitachi dealer for details. ENGINE E mode control 50 A alternator Dry-type air fi lter with evacuator valve (with air fi lter restriction indicator) Cartridge-type engine oil fi lter Cartridge-type fuel fi lter Air cleaner double fi lters Radiator, oil cooler and intercooler with dust protective net Radiator reserve tank Fan guard Isolation-mounted engine Auto-idle system Electrical fuel feed pump with auto stop HYDRAULIC SYSTEM Control valve with main relief valve Extra port for control valve Suction fi lter Full-fl ow fi lter Pilot fi lter Swing drain fi lter CAB CRES II (Center pillar reinforced structure) cab OPG top guard fi tted Level I (ISO 10262) compliant cab All-weather sound suppressed steel cab Equipped with reinforced, tinted (green color) glass windows 4 fl uid-fi lled elastic mounts Front windows on upper, lower and left side can be opened Intermittent windshield wipers Front window washer Adjustable reclining seat with adjustable armrests Footrest Electric horn AM-FM radio with digital clock Seat belt Drink holder Cigarette lighter Ashtray Storage box Glove compartment Fire extinguisher bracket Floor mat Short wrist control levers Pilot control shut-off lever Engine stop knob Auto control air conditioner Transparent roof with slide curtain Mechanical suspension seat with heater MONITOR SYSTEM Display of meters: water temperature, hour, fuel rate, clock Other displays: auto-idle, glow operating conditions, etc Alarms: overheat, engine warning, engine oil pressure, alternator, minimum fuel level, air fi lter restriction, overload, etc Alarm buzzers: overheat, engine oil pressure, overload LIGHTS 2 working lights UPPERSTRUCTURE Undercover kg counterweight Fuel level fl oat Hydraulic oil level gauge Rear view mirror (right, left side & cab rear) Swing parking brake UNDERCARRIAGE Travel parking brake Travel motor covers Hydraulic track adjuster Bolt-on sprocket Upper and lower rollers Reinforced track links with pin seals 4 tie down hooks FRONT ATTACHMENTS HN bushing WC (tungsten-carbide) thermal spraying Reinforced resin thrust plate Flanged pin Dirt seal on all bucket pins MISCELLANEOUS Standard tool kit Lockable machine covers Lockable fuel refi lling cap Skid-resistant handrails Travel direction mark on track frame Onboard information controller OPTIONAL EQUIPMENT Optional equipment may vary by country, so please consult your Hitachi dealer for details. CAB Laminated round glass window OPG top guard, Level ll Air suspension seat with heater Rain guard Sun visor 12 V power source LIGHTS Additional cab roof front lights Additional cab roof rear lights Rotating lamp Additional boom lights with cover UNDERCARRIAGE Track undercover Blade (width mm / mm) 450 mm, 600 mm triple grouser shoes 450 mm pad shoes 450 mm rubber shoes 450 mm fl at shoes ATTACHMENTS Hammer and crusher piping 2 pump combined fl ow Pilot accumulator Welded bucket link A with welded hook OTHERS Hose rupture valve Overload warning device Fuel double fi lter Rear view camera Biodegradable oil High-performance full fl ow fi lter 23
Engine Powered Forklift ton
Engine Powered Forklift 1. - 7.0 ton 8FGCU1-30 8FGC3U-70U www.toyota-forklifts. Engine Powered Forklift 1. - 1.7 tonne Truck specifications 8FGCU1 8FGCU18 1.1 Manufacturer TOYOTA TOYOTA 1.2 Model 8FGCU1
Læs mereEngine powered forklift tonne
www.toyota-forklifts. Engine powered forklift 1.5-3.5 tonne Engine powered forklift 1.5-1.75 tonne Truck specifications 02-8FGF15 02-8FDF15 02-8FGF18 02-8FDF18 1.1 Manufacturer TOYOTA TOYOTA TOYOTA TOYOTA
Læs mereManual Transmission Remove and Install (2,0 DOHC 8V Engine) ( ) Remove
Manual Transmission Remove and Install (,0 DOHC 8V Engine) (6 4 0) Workshop Equipment Transmission jack Materials Brake fluid (Super Dot 4) ESD-M6C57-A Remove. Standard preparatory measures: Make a note
Læs mereSlot diffusers. Slot diffusers LD-17, LD-18
LD-17, LD-18 Application LD-17 and LD-18 are designed for supply of cold or warm air in rooms with a height between. m and 4 m. They allow easy setting of air deflectors for different modes of operation
Læs merePEMS RDE Workshop. AVL M.O.V.E Integrative Mobile Vehicle Evaluation
PEMS RDE Workshop AVL M.O.V.E Integrative Mobile Vehicle Evaluation NEW - M.O.V.E Mobile Testing Platform Key Requirements for Measuring Systems Robustness Shock / vibrations Change of environment Compact
Læs mereCOMPLETE ENGINE PARTS LIST
COMPLETE ENGINE PARTS LIST for CRF50F Please confirm engine spec. CODE NO, TRANSMISSION GENERATOR 3a CH-200-1129301 NO-IGNITION TYPE 3b CH-200-1129302 3 SPEED CLOSED TRANSMISSION INNER ROTOR KIT TYPE-1
Læs mereHudevad P5 Easy Clean
Technical datasheet Key benefits Rengøring Unique tilting front Radiator front tilts away from the wall for easy access to cleaning the back of the radiator Classic Hudevad design Trademark Hudevad design
Læs mereframe bracket Ford & Dodge
, Rev 3 02/19 frame bracket 8552005 Ford & Dodge ITEM PART # QTY DESCRIPTION 1 00083 8 NUT,.50NC HEX 2 00084 8 WASHER,.50 LOCK 3 14189-76 2 FRAME BRACKET 4 14194-76 1 411AL FRAME BRACKET PASSENGER SIDE
Læs mereUNISONIC TECHNOLOGIES CO.,
UNISONIC TECHNOLOGIES CO., 3 TERMINAL 1A NEGATIVE VOLTAGE REGULATOR DESCRIPTION 1 TO-263 The UTC series of three-terminal negative regulators are available in TO-263 package and with several fixed output
Læs mereParts catalogue Rabbit Mower
OREC ISSUED NO. RM97EU-1 Parts catalogue Rabbit Mower (EXPORT MODEL) RM97 MODEL CODE RM97 0292- CONTENTS FRAME 1-12 TRANSMISSION 13-21 HST 22-23 HANDLE 24-26 FRONT 27-30 CONTROL 31-35 CUTTING 36-42 SEAT
Læs mereMandara. PebbleCreek. Tradition Series. 1,884 sq. ft robson.com. Exterior Design A. Exterior Design B.
Mandara 1,884 sq. ft. Tradition Series Exterior Design A Exterior Design B Exterior Design C Exterior Design D 623.935.6700 robson.com Tradition OPTIONS Series Exterior Design A w/opt. Golf Cart Garage
Læs mereHudevad P200. Technical datasheet
Technical datasheet Key benefits Low, streamlined design Ideal in front of glazing to prevent cold draughts Available in two depths For high flexibility in usage Historical Kundenedfald Grøn energi Flat
Læs mereIntegrated Engine, Vehicle, and Underhood Model of a Light Duty Truck for VTM Analysis
Integrated Engine, Vehicle, and Underhood Model of a Light Duty Truck for VTM Analysis GT-SUITE Conference 2009 Dr. Philip Keller Dr. Wolfgang Wenzel Dr. Michael Becker December 7, 2009 Outline Introduction
Læs mereNissan Platinum G04 Series vs. Competition National Dealer Conference
Nissan Platinum G04 Series vs. Competition 2008 National Dealer Conference Platinum G04 Series Differentiating the Platinum G04 Series If the competition does not provide (or charges extra for) a particular
Læs mereTC-50 / TC-65 / TC-80. TC-65 20m (65 7 ) 1.05m (42 ) 36.4kW (49hp) 10m( o
R TC-50 / TC-65 / TC-80 TRACKED SPECIFICATION: Conveyor Length: Belt Width: Net Engine (Tier 3)Power: Max Discharge height: TC-50 15.7m (51 7 ) 1.05m (42 ) 36.4kW (49hp) 7.6m(24 11 ) @ 27 o TC-65 20m (65
Læs mereTC-80 TRACKED CONVEYORS TC-65 / TC-80
R TC-65 / TC-80 TRACKED S TC-80 TC-65 TC-80 Conveyor Length:20m (65 7 ) 23.5m (77 ) Belt Width: 1.05m (42 ) 1.05m (42 ) Net Engine (Tier 3)Power:36.4kW (49hp) 36.4kW (49hp) Max Discharge height:10m(32
Læs mereAPG 3009 Parts Manual
APG 3009 Parts Manual APG3009-A-0I-JD HEAD COVER COMP. BOLT JF340-A-01 $1.50 $3.00 APG3009-A-02-JD HEAD COVER WASHER COMP. JF340-A-02 $0.20 $0.40 APG3009-A-03-JD WASHER COVER PACKING JF340-A-03 $0.20 $0.40
Læs merelitronic` Engine Output (SAE J1349): 173 HP / 129 kw Engine Output (ISO 9249): 175 HP / 129 kw
Log Loader A 924 C HD litronic` Operating Weight: 63,90 lb Engine Output (SAE J1349): 173 HP / 129 kw Engine Output (ISO 9249): 17 HP / 129 kw Technical Data Engine Rating per SAE J1349 173 HP (129 kw)
Læs mereMandara. PebbleCreek. Tradition Series. 1,884 sq. ft robson.com. Exterior Design A. Exterior Design B.
Mandara 1,884 sq. ft. Tradition Series Exterior Design A Exterior Design B Exterior Design C Exterior Design D 623.935.6700 robson.com Tradition Series Exterior Design A w/opt. Golf Cart Garage Exterior
Læs mereSkidding System. Challenge Us
Skidding System n Malm Orstads cutting edge Engineering department designs and fabricates tailor made skidding systems for all kinds of enviroments. Our skidding systems are amongst the most efficient
Læs mereNo Part no. Description Q ty Remarks No Part no. Description Q ty Remarks Filter, air cleaner Air cleaner 1 Assy 2 050
1 2 2 3 No Part no. Description Q ty Remarks No Part no. Description Q ty Remarks 1 050604-1 Filter, air cleaner 1 3 050601-1 Air cleaner 1 Assy 2 050603-1 Tube, inlet 1 No. Part No. Description Q ty Remarks
Læs mereSP40G001 40GKX GMC. Split system "Global Cassette" indoor unit. Spare parts 40GKX GKX
SP0G00 0GKX GMC Split system "Global Cassette" indoor unit Spare parts 0GKX 0-08-0 0GKX 08-08-05-060 0GKX 0-08-0 Split system "Global Cassette" indoor unit (Without electric heater) 8 7 9 6 5 0 5 6 7 8
Læs mereRef. Parts Number Parts Name Quantity Remarks
Transmission ASSY Excluding items in Remark Brake ASSY(LS60),7,8,9,07 8 9 Including 6 099-70300 Brake Pulling Spring Remarks 5 099-0800 Brake Adjuster Remarks 099-0300 Receive for Brake Spring Remarks
Læs mereErgonomisk løft. Specials. www.certex.dk. Højdestabler kasser High stacking boxes. Rulle løfter med 90º tilt Roll handling with 90º tilt
Ergonomisk løft Højdestabler kasser High stacking boxes Rulle løfter med 90º tilt Roll handling with 90º tilt Kuffert løfter Baggage handling Håndtering af postpakker Handling of parcels Rudehåndtering
Læs mereDiamond Core Drilling
Diamond Core Drill ZIZ-250Pro Product Description Diamond core drill is a tool used for drilling holes on reinforced concrete, rocks and fire-proof materials. It features in high-efficiency, smooth and
Læs mereParts catalogue BUSH CUTTER
OREC ISSUED NO. 61-2 Parts catalogue BU CUTTER (EXPORT MODEL) 61, 71 61H, 71H MODEL 61 71 CODE 0257-0258- CONTENTS Fig.1 HANDLE------------------------------------------------------------- 1 Fig.2 FRAME---------------------------------------------------------------
Læs mereME6212. High Speed LDO Regulators, High PSRR, Low noise, ME6212 Series. General Description. Typical Application. Package
High Speed LDO Regulators, High PSRR, Low noise, Series General Description The series are highly accurate, low noise, CMOS LDO Voltage Regulators. Offering low output noise, high ripple rejection ratio,
Læs mereInstallation Venligst bemærk, håndpumpen kun må monteres i lodret position.
HP-1. HP-3. HP-. Hand Operated Håndpumpe The HP pump is a single acting hand operated pump made of stainless steel St.1.431 making it particularly applicable within the food industry and in environmentally
Læs mereNo. Part No. Description Q ty Remarks Cleaner Assembly (Includes Fig.1,2,4 & 5) Cap Tube, inlet Filter, air cleane
No. Part No. Description Q ty Remarks 1 050601 Cleaner Assembly (Includes Fig.1,2,4 & 5) 2 050602 Cap 3 050603 Tube, inlet 4 050604 Filter, air cleaner 5 050605 Net, air cleaner No. Part No. Description
Læs mereSPARE PARTS LIST. RIDERS R316 TXs AWD, , , 2012
SPARE PARTS LIST RIDERS R316 TXs AWD, 966757801, 967152101, 2012 103CM CUTTING DECK R316 TXs AWD, 966757801, 967152101, 2012 103CM CUTTING DECK R316 TXs AWD, 966757801, 967152101, 2012 Ref Part No Description
Læs mereVACUUM PRESSURE REGULATOR
VUUM PRESSURE REGULTOR DESRIPTION PRESSURE RNGE ONNETION SERIES PGE max. 22 l/min miniature -850 0 mbar 1 8 NPT V800.02 max. 22 l/min miniature -850 0 mbar 10-32 and flange V900.02 max. 0 l/min precise
Læs mereHelp / Hjælp
Home page Lisa & Petur www.lisapetur.dk Help / Hjælp Help / Hjælp General The purpose of our Homepage is to allow external access to pictures and videos taken/made by the Gunnarsson family. The Association
Læs mereTGP 15 H. Betjeningsvejledning. Texas Power Line Pumper 2003 / 2
2003 / 2 Betjeningsvejledning Texas Power Line Pumper TGP 15 H Texas Andreas Petersen A/S Knullen 2 DK-5260 Odense S Tlf. 6395 5555 Fax 6395 5558 post@texas.dk - www.texas.dk ADVARSEL - Læs altid betjeningsvejledningen
Læs mereUni-Valve A /S SCOTCH-YOKE. Pneumatisk aktuator - Pneumatic actuator. Type UNI-PD - Type UNI-PS (UNI-PD/PS 50, 70, 85, 100, 125, 150, 200)
UniValve A /S V E N T I L E R & I N S T R U M E N T E R Telefon (+45) 43 43 82 00 Telefax (+45) 43 43 74 75 mail@univalve.com www.univalve.com Pneumatisk aktuator Pneumatic actuator SCOTCHYOKE Type UNIPD
Læs mereStrategic Business Area. LINAK og vores rejse ind i AUTOMOTIVE krav og regulativer
LINAK og vores rejse ind i AUTOMOTIVE krav og regulativer LINAK - gets you moving From less complicated to complex and heavy-duty applications 2 LINAK in brief More than 1,800 dedicated employees Production
Læs mereSpare parts list ( ) HD 3.1/31 P
Spare parts list (15751070) HD 3.1/31 P 2010-07-07 www.kaercher.com EN Spare parts list HD 3.1/31 P (59704780)... 6 10 Frame (01031070)... 7 20 Pump set (01085070)... 9 21 Cylinder head (01085080)...
Læs mereSolid TYRES for your FORKLIFT TRUCKS
Solid TYRES for your FORKLIFT TRUCKS Find more information at starco.com STARCO Tusker-Unicorn 2017-I INT-eng STARCO IS A REGISTERED TRADEMARK Copyright 2016 by STARCO - all rights reserved FORKLIFT TRUCKS
Læs mereSmall Autonomous Devices in civil Engineering. Uses and requirements. By Peter H. Møller Rambøll
Small Autonomous Devices in civil Engineering Uses and requirements By Peter H. Møller Rambøll BACKGROUND My Background 20+ years within evaluation of condition and renovation of concrete structures Last
Læs mereRAVE. The New Radar Motion Sensor Rated IP67: Optimized for Harsh Outdoor Applications
RAVE The New Radar Motion Sensor Rated IP67: Optimized for Harsh Outdoor Applications Product Presentation RAVE radar motion sensor In addition to the RaDec and RMS product families, the new RAVE radar
Læs mereAFL10-LED-KIT Architectural FloodLight HID to LED Upgrade Kit kl_afl10_ledkit_spec.pdf
JOB NOTES TYPE APPROVALS FEATURES Three beam patterns Wide, Vertical and Narrow Flood generate high efficiencies and outstanding uniformity of illumination. 350 or 500mA current 3000K, 4000K or 5000K color
Læs merePILLE PRESSE. developed properly for pellet production and all technologies and mechanical solutions are chosen to
PILLE PRESSE N-ECO pellet mill machine is projected and manufactured in accordance with CE norm about construction s prescriptions and safety. With N-ECO you will save money and get lower pellet production
Læs merePILLE PRESSE. 1 of 8. Salg & Service PE Maskiner Ans ApS Søgade 9 DK-8643 Ans By Tlf. +45 8687 0535 Fax +45 8687 0776 www.pemaskiner.
PILLE PRESSE Lav dine egne piller! N-MICRO pellet machine is the easiest way to Pellet. N-MICRO has been projected and developed properly for home and small pellet production, so every carpenter, farmer
Læs mereQUICK START Updated:
QUICK START Updated: 24.08.2018 For at komme hurtigt og godt igang med dine nye Webstech produkter, anbefales at du downloader den senest opdaterede QuickStart fra vores hjemmeside: In order to get started
Læs mereConstant Terminal Voltage. Industry Workshop 1 st November 2013
Constant Terminal Voltage Industry Workshop 1 st November 2013 Covering; Reactive Power & Voltage Requirements for Synchronous Generators and how the requirements are delivered Other countries - A different
Læs merel i n d a b presentation CMD 07 Business area Ventilation
l i n d a b presentation CMD 07 Business area Ventilation 1 Ventilation Sales LTM June 4 097 MSEK EBIT LTM June 449 MSEK 11,0% Two Divisions ADS 85% Comfort 15% YTD June 07 % Sales +31 Nordic countries
Læs mereDIVAR VIGTIGT! / IMPORTANT! MÅL / DIMENSIONS. The DIVAR wall lamp comes standard. with 2.4 m braided cord and a plug in power supply (EU or UK).
DIVAR VIGTIGT! / IMPORTANT! VIGTIGT læs vores anvisninger før du bruger produktet. Har du problemer med den elektriske installation, skal du kontakte en elektriker. Sørg for at altid slukke for strømmen
Læs mereCYLINDER - CRANKCASE CONTINUED ON NEXT FRAME. Ref. Part No. Number Description Qty Remarks
A1 CYLINDER - CRANKCASE 1 692-W0090-42-4D CRANK CYLINDER ASSEMBLY 1 2 688-15100-05-94 CRANKCASE ASSEMBLY.... 1 3 688-11370-00-00. CHECK VALVE ASSEMBLY.. 2 4 650-11370-00-00. CHECK VALVE ASSEMBLY.. 1 5
Læs mereInstallation Venligst bemærk, håndpumpen kun må monteres i lodret position.
HP-1. HP-3. HP-. Hand Operated Pump Håndpumpe The HP pump is a single acting hand operated pump made of stainless steel St.1.431 making it particularly applicable within the food industry and in environmentally
Læs mereBilag 1 GPS dataudskrifter fra Stena Carisma ved passage af målefelt
Bilag 1 GPS dataudskrifter fra Stena Carisma ved passage af målefelt Passage 1 Passage 2 Passage 3 Passage 4 Passage 5 27 Bilag 2 Engelsk beskrivelse af S4-måleren InterOcean S4 Current Meter The S4 Electromagnetic
Læs mereFundamentals of HVAC Control Systems
ASHRAE Hong Kong Chapter Technical Workshop Fundamentals of HVAC Control Systems 18, 19, 25, 26 April 2007 2007 ASHRAE Hong Kong Chapter Slide 1 Chapter 4 Sensors and Auxiliary Devices 2007 ASHRAE Hong
Læs mereGREEN KEY GREEN DREAMS
GREEN KEY GREEN DREAMS EN VI RON MENT 1 VI TÆNKER PÅ MILJØET OG DIN KOMFORT Du har valgt en Green Key (Grøn Nøgle) virksomhed. Det betyder, at du automatisk er med til at passe på miljøet, da vi lever
Læs mereINSTALLATION INSTRUCTIONS STILLEN FRONT BRAKE COOLING DUCTS NISSAN 370Z P/N /308960!
Materials supplied: 1. (10) Zip Ties 2. (4) Hose Clamps 3. (2) Brake Duct Hose 4. (2) Brake Shields 5. (2) Front Brake Ducts ( Stock Fascia Only ) 6. (2) Washers 1 OD ( Stock Fascia Only ) 7. (8) Shims
Læs mereTopdresser 1800 for Workman 3000/4000 Series
Form No. Topdresser 1800 for Workman 3000/4000 Series Model No. 44225 90001 and Up Parts Catalog Ordering Replacement Parts To order replacement parts, please supply: the part number, the quantity, and
Læs mereLF-8750 GENERATOR Industrial Park Road Van Buren, AR (866)
LF-8750 GENERATOR 2205 Industrial Park Road Van Buren, AR 72956 www.lifanpowerusa.com (866) 471-7464 LF-8750 GENERATOR 1 GENERAL GASOLINE ENGINE 1 2 Bolt M6 12 29 3 Cylinder head cover Assy 1 4 Gasket,
Læs merePortal Registration. Check Junk Mail for activation . 1 Click the hyperlink to take you back to the portal to confirm your registration
Portal Registration Step 1 Provide the necessary information to create your user. Note: First Name, Last Name and Email have to match exactly to your profile in the Membership system. Step 2 Click on the
Læs mereSpare parts ASC 3000 G V11 SKU:
Spare parts ASC 3000 G Prozessanzeige LED ASC Art.Nr.:4441600088 Low pressure gauge ASC Art.Nr.:4440600046 Cover gauge group Art.Nr.:4443900278 Printer ASC G-Version Art.Nr.:4441600178 Paper for printer
Læs mereS M Illust.No. Part Name DENSO P/N Manu. P/N QTY I/C Start End Remarks
DENSO P/N : 965-351 Manufacturer : TOYOTA Parts List Page 1 Compo. P/N: 965-351 Assy P/N: 965-351 S M Illust.No. Part Name DENSO P/N Manu. P/N QTY I/C Start End Remarks PUMP ASSY, INJECTI 965-351 221-6E25-2
Læs mereLEADit & USEit 2018 CampusHuset - Campus Bindslevs Plads i Silkeborg 25. Oktober 2018
LEADit & USEit 2018 CampusHuset - Campus Bindslevs Plads i Silkeborg 25. Oktober 2018 Global visibility for assets and field equipment - Enhancing efficiency, utilization, and safety Agenda Forhistorie,
Læs mereMobil- og bæltekraner
Kranudlejning Mobil- og bæltekraner Udlejning på time- eller projektbasis Når der skal løftes, hejses og bugseres Op til 280 tons M.J. Eriksson A/S råder over en stor og meget bred flåde af bælte- og mobilkraner,
Læs mere3D NASAL VISTA 2.0
USER MANUAL www.nasalsystems.es index index 2 I. System requirements 3 II. Main menu 4 III. Main popup menu 5 IV. Bottom buttons 6-7 V. Other functions/hotkeys 8 2 I. Systems requirements ``Recommended
Læs mereBrugsanvisning. Installation Manual
Manual size: 148 x 210 mm 175g copper paper(铜版纸印刷) UNIVERSAL BIL TAGBAGAGEBÆRER Brugsanvisning UNIVERSAL CAR ROOF RACK Installation Manual Model no. 10889 Tak fordi du valgte dette produkt, som vi håber
Læs mereMobil- og bæltekraner
Kranudlejning Mobil- og bæltekraner Udlejning på time- eller projektbasis Maj 2019 Når der skal løftes, hejses og bugseres Op til 280 tons M.J. Eriksson A/S råder over en stor og meget bred flåde af bælte-
Læs mereMS-H280-Pro Magnetic Stirrer
MS-H280-Pro Magnetic Stirrer www..com Copyright: No part of this manual may be reproduced or transmitted without prior written permission of. VERSION201407 CONTENTS Chapter 1: Working Principle... 3 1
Læs mereLithium-Ion Jump-Starters / Jumper Cables
AUTOMOTIVE Lithium-Ion Jump-Starters / Jumper Cables Lithium-Ion Jump-Starter 1300: Part No. DRLJS130 1300 4 6 8 cylinder (6 liter gas 3 liter diesel) SafeJump technology prevents sparking and protects
Læs mereQUICK START Updated: 18. Febr. 2014
QUICK START Updated: 18. Febr. 2014 For at komme hurtigt og godt igang med dine nye Webstech produkter, anbefales at du downloader den senest opdaterede QuickStart fra vores hjemmeside: In order to get
Læs mereMontage bjælkeklipper BM 870 III Art. No / BM 875 III Art. No
Montage bjælkeklipper BM 870 III Art. No. 112871 / BM 875 III Art. No. 112872 Assembly scythe mower BM 870 III Art. No. 112871 / BM 875 III Art. No. 112872 Motor og driv enhed. Engine and drive unit. Løsdele
Læs mereREAR SHOCKS. Ref. Part No. Number Description Qty Remarks
A1 REAR SHOCKS 1 J56-F2110-W0-00 REAR ARM COMP. (J56-F2110-00-00).......... 1 2 J10-22123-00-00. BUSH 1................. 2 3 90105-10359-00 BOLT, WASHER BASED..... 2 4 90185-10115-00 NUT, SELF-LOCKING........
Læs mereModel Brugsanvisning Instruction manual
Model 11560 Brugsanvisning Instruction manual DK GB CAMPINGTOILET Dele Toiletlåg Toiletsæde Vandpåfyldningsstuds Pumpestempel Låsebeslag 10 liters skylletank Tømmetud Skyderventil Niveauindikator 20 liters
Læs mereMobil- og bæltekraner
Kranudlejning Mobil- og bæltekraner Udlejning på time- eller projektbasis Når der skal løftes, hejses og bugseres Op til 280 tons M.J. Eriksson A/S råder over en stor og meget bred flåde af bælte- og mobilkraner,
Læs mereREAR SHOCKS. Ref. Part No. Number Description Qty Remarks
A1 REAR SHOCKS 1 J56-F2110-W0-00 REAR ARM COMP. (J56-F2110-00-00).......... 1 2 J10-22123-00-00. BUSH 1................. 2 3 90105-10359-00 BOLT, WASHER BASED..... 2 4 90185-10115-00 NUT, SELF-LOCKING........
Læs mereManeurop reciprocating compressors
MAKING MODERN LIVING POSSIBLE Maneurop reciprocating compressors MT - MTZ - LTZ - NTZ - 60 z R404A - R507A - R407C - R134a - R22 QUICK REFERENCE PRODUCT RANGE Nominal voltage M-BP Applications LBP Applications
Læs mereRecall information fra C. Reinhardt
Ballerup, den 19. januar 2016 Recall information fra C. Reinhardt Kære alle Vi har modtaget en recall fra Suzuki Global. I dette brev kan du læse de vigtigste punkter vedrørende problemerne og hvordan
Læs mereVarenr.: 553925 90 højre 553926 90 venstre 554027 90º højre med coating 554028 90º venstre med coating
DK GH Skiftespor Varenr.: 55395 90 højre 55396 90 venstre 55407 90º højre med coating 55408 90º venstre med coating 553991 60º højre 553995 60º venstre 551058 60º højre med coating 551059 60º venstre med
Læs mereSpare parts ASC 3500 G LE V6 SKU:
Front view ASC 3500 G LE Process display 4. LED ASC Art.Nr.:4441600184 LP gauge ASC Art.Nr.:4440600221 Cover gauge group Art.Nr.:4443900278 Printer ASC G-Version Art.Nr.:4441600178 Paper for printer 4x
Læs mereSpare parts ASC 5300 G V5
Front view ASC 5300 G Process display Art.Nr.:4441600088 LP Gauge Art.Nr.:4440600221 Cover gauge group Art.Nr.:4443900278 Printer ASC G-Version Art.Nr.:4441600178 Paper for printer ASC Art.Nr.:4445900088
Læs mereDANSK INSTALLATIONSVEJLEDNING VLMT500 ADVARSEL!
DANSK INSTALLATIONSVEJLEDNING VLMT500 Udpakningsinstruktioner Åben indpakningen forsigtigt og læg indholdet på et stykke pap eller en anden beskyttende overflade for at undgå beskadigelse. Kontroller at
Læs meretoolspareparts.com.au
Page 1 / 9 Page 2 / 9 Page 3 / 9 Parts List 1 JM23100006 CROSS HEAD SCREW M5X20 2 2 JM23100007 FLAT WASHER 5 2 3 JM23100008 PAD 4 4 JM23100009 LOCKNUT M10 1 5 JM23100010 FLAT WASHER 10 2 6 JM23100300 BASE
Læs mereH07RN-F CPR BESKRIVELSE STANDARDER. Kontakter Installation Tlf.: Support:
Industrial flexible rubber cable range with an insulation and sheath in elastomers. Cables for heavy duty uses, Oil resistant and Flame retardancy according to IEC/EN 60332-1-2 standard. BESKRIVELSE Application
Læs mereModell nr. LS1018L 260MM SLIDE COMPOUND MITER SAW
Sida 1 / 3 Sida 2 / 3 Sida 3 / 3 Sida 1 / 7 001 JM23100006 CROSS HEAD SCREW M5X20 2 002 JM23100007 FLAT WASHER 5 2 003 JM23100008 PAD 4 004 JM23100009 LOCKNUT M10 1 005 JM23100010 FLAT WASHER 10 2 006
Læs mereSpare parts ASC 3500 G V7 SKU:
Front view ASC 3500 G Process display 4. LED ASC Art.Nr.:4441600184 LP gauge ASC Art.Nr.:4440600221 Cover gauge group Art.Nr.:4443900278 Printer ASC G-Version Art.Nr.:4441600178 Paper for printer 4x ASC
Læs mereJM-3080 PARTS LIST. Jet-Set JM-3080
JM-3080 PARTS LIST ITEM DESCRIPTION PART # QTY ITEM DESCRIPTION PART # QTY DECAL - JM-3080 FRONT 1 PANEL N/A 1 46 BALL VALVE JM22-0494 1 (SEE JM71-0004) 47 HANDLE GRIP JM7-0227 1 2 BOLT JM27-0066 10 48
Læs mereVores mange brugere på musskema.dk er rigtig gode til at komme med kvalificerede ønsker og behov.
På dansk/in Danish: Aarhus d. 10. januar 2013/ the 10 th of January 2013 Kære alle Chefer i MUS-regi! Vores mange brugere på musskema.dk er rigtig gode til at komme med kvalificerede ønsker og behov. Og
Læs mereOur activities. Dry sales market. The assortment
First we like to start to introduce our activities. Kébol B.V., based in the heart of the bulb district since 1989, specialises in importing and exporting bulbs world-wide. Bulbs suitable for dry sale,
Læs mereSikkerhedsvejledning
11-01-2018 2 Sikkerhedsvejledning VIGTIGT! Venligst læs disse instruktioner inden sengen samles og tages i brug Tjek at alle dele og komponenter er til stede som angivet i vejledningen Fjern alle beslagsdele
Læs merePrecision Dial Gauges. Dial Gauge M 2 T. Dial Gauge MU 52 T. Dial Gauge M 2 X. Dial Gauge M 2 TK.
Dial Gauge M 2 T Dial Gauge MU 52 T Dial Gauge M 2 TK Dial Gauge M 2 X Precision Dial Gauges Email: jlouismenegon@aol.com - web: Dial Gauge MU 52 ST Dial Gauge M 2 TOP S Dial Gauge M 3 a S 0.005 mm 5mm
Læs mereCHAPTER 8: USING OBJECTS
Ruby: Philosophy & Implementation CHAPTER 8: USING OBJECTS Introduction to Computer Science Using Ruby Ruby is the latest in the family of Object Oriented Programming Languages As such, its designer studied
Læs mereMontage bjælkeklipper BM 5001R Art. No. 112870. Assembly scythe mower BM 5001R Art. No. 112870
Montage bjælkeklipper BM 5001R Art. No. 112870 Assembly scythe mower BM 5001R Art. No. 112870 Løsdele pose pakket, afdækninger, skaftkonsol, skaft højre og venstre. Lose parts plastic bag, covers, handle
Læs mereTM4 Central Station. User Manual / brugervejledning K2070-EU. Tel Fax
TM4 Central Station User Manual / brugervejledning K2070-EU STT Condigi A/S Niels Bohrs Vej 42, Stilling 8660 Skanderborg Denmark Tel. +45 87 93 50 00 Fax. +45 87 93 50 10 info@sttcondigi.com www.sttcondigi.com
Læs mereProject Step 7. Behavioral modeling of a dual ported register set. 1/8/ L11 Project Step 5 Copyright Joanne DeGroat, ECE, OSU 1
Project Step 7 Behavioral modeling of a dual ported register set. Copyright 2006 - Joanne DeGroat, ECE, OSU 1 The register set Register set specifications 16 dual ported registers each with 16- bit words
Læs mereOn-board emission measurements NO X. Erik Fridell
On-board emission measurements NO X Erik Fridell 2012-10-23 Research and consultancy by IVL Swedish Environmental Research Institute around 200 employees engineers, economists, social scientists, geoscientists,
Læs mere3D NASAL VISTA TEMPORAL
USER MANUAL www.nasalsystems.es index index 2 I. System requirements 3 II. Main menu 4 III. Main popup menu 5 IV. Bottom buttons 6-7 V. Other functions/hotkeys 8 2 I. Systems requirements ``Recommended
Læs mereRPW This app is optimized for: For a full list of compatible phones please visit radiation. result.
TM TM RPW-1000 Laser Distance Measurer This app is optimized for: For a full list of compatible phones please visit www.ryobitools.eu/phoneworks IMPORTANT SAFETY S READ AND UNDERSTAND ALL INSTRUCTIONS.
Læs mereKPW2700V LINE TRIMMER/WEEDER
2051 Saturn Street Monterey Park, CA 91755 323.728.7266 323.728.5304 Fax http://www.tmcpower.com PARTS CATALOG LINE TRIMMER/WEEDER ENGINE REFERENCE: TJ027E-AF70 TJ027E-BF70 CARB TIER III/EPA PHASE 2 REV
Læs mere01) BACK FRAME ASSEMBLY BOM ( )
NO. PART NO. PART DESCRIPTION QTY. VENTE 01-3191-1537-00 BACK FRAME WELDING 1 01-3190-0071-00 BACK PLATE 1 01-3190-0116-00 BACK GROUND PLATE 1 01-3190-0119-00 ANGLE BAR (LONG) 2 01-3190-0120-00 ANGLE BAR
Læs mereProgrammable pressure transmitters PTM
Programmable pressure transmitters PTM Version: 07.01.2016 Technical Specifications Pressure measuring range (bar) 0.1... 0.5 > 0.5... 2 > 2... 25 Overpressure 3 bar 3 x FS ( 3 bar) 3 x FS Burst pressure
Læs mereFREIGHTLINER. engine coolant reservoir. also available: COVERAGE FOR. Engine Coolant Reservoir. EGR Valve. EGR Cooler. Headlight Assembly
COVERAGE FOR engine coolant reservoir : 603-5207 : A0528531000, A0528531001, A0528531002 Make: Freightliner Years: 2016-12 Model: Business Class M2, M2 106, M2 112 also available: See back for complete
Læs merePARALLELIZATION OF ATTILA SIMULATOR WITH OPENMP MIGUEL ÁNGEL MARTÍNEZ DEL AMOR MINIPROJECT OF TDT24 NTNU
PARALLELIZATION OF ATTILA SIMULATOR WITH OPENMP MIGUEL ÁNGEL MARTÍNEZ DEL AMOR MINIPROJECT OF TDT24 NTNU OUTLINE INEFFICIENCY OF ATTILA WAYS TO PARALLELIZE LOW COMPATIBILITY IN THE COMPILATION A SOLUTION
Læs mereBrug sømbrættet til at lave sjove figurer. Lav fx: Få de andre til at gætte, hvad du har lavet. Use the nail board to make funny shapes.
Brug sømbrættet til at lave sjove figurer. Lav f: Et dannebrogsflag Et hus med tag, vinduer og dør En fugl En bil En blomst Få de andre til at gætte, hvad du har lavet. Use the nail board to make funn
Læs mereHahn KT-EV / KT-EN. For front and side entry doors. n For all common upstand dimensions from 15 to 23 mm
Hahn KT-EV / KT-EN For front and side entry doors n For all common upstand dimensions from 15 to 3 mm Hahn KT-EN Universal hinge with upstand fastening option for front and side entry doors Features n
Læs mereModel Control Design by Jens Juul Eilersen
85 x 182 cm 70 x 182 cm 85 x 182 cm 70 x 182 cm English: Dansk: Control is the ultimate reclining chair. Here you can control your sitting and Control er den ultimative hvilestol. Her kan du kontrollere
Læs mere