PILLE PRESSE. 1 of 8. Salg & Service PE Maskiner Ans ApS Søgade 9 DK-8643 Ans By Tlf Fax

Transkript

1 PILLE PRESSE Lav dine egne piller! N-MICRO pellet machine is the easiest way to Pellet. N-MICRO has been projected and developed properly for home and small pellet production, so every carpenter, farmer or private will produce his own pellet with his own material. N-MICRO is the smallest pellet machinery of Nova models, but still all technologies and mechanical solutions are the highest on the market to gain on low maintenance and production cost and obtain the best quality pellet on market, completely without additives or glues, from natural origin or not. Therefore, with N-MICRO and others Nova pellet mill machineries, you can sell pellet to private or industrial market or for your own consumption. N- 1 of 8

2 MICRO is projected and manufactured in accordance with CE norm about construction s prescriptions and safety. N-MICRO pellet mill has the following general specifications, valid for each model: PELLET MILL Unit of measurement N-MICRO Dies cutter internal diameter mm 240 Rollers diameter mm 104 Pellet diameter mm 6-8 (different on request) Dimensions (with N-RAFF) mm 1650x950x1850 Weight (with N-RAFF) Kg 700 Technical specification: PILLE PRESSE N-MICRO A B ELECTRIC POWER Active power installed 7.5 Kw 9.2 Kw Electric source V 400 +/- 10% Hz 50/60 PELLET PRODUCTION PER HOUR soft materials (like spruce, pine, poplar and olive tree), straw, hay, etc. hard materials (like beech, oak, chestnut) Biomass (like cereals, manure, etc) 45/90 50/120 40/80 45/100 60/110 70/120 2 of 8

3 General information for raw material to be used to load pellet mill machinery: Consistency : saw dust or other material size among 0.5 mm and 1.5 mm Moisture rate : between 8% and 14% Characteristics : every kind of wood tree or other material, without metal residuals N-MICRO pellet mill is complete by: PLC electrical cabinet (or screw power level) Dozing screw lead by frequency driver Easy and fast cleaning with front door Water/air spray to humidify the raw material 3 of 8

4 Mechanical sensor level End of cycle oil pump plugs (oil pump optional) Suction plugs for dust and air Technical innovations of N-MICRO pellet mill: Small, solid and compact size machinery Pellet production without additives, from natural origin or not Roller s setting and adjustment outside the main door of the machine, that means no running cycle stops for setting Ring die with easy change system and low wear time for the tools of the pellet mill Rollers attached in two sides to the structure of the machinery Saw dust or other material loading with regulating valve or conveyor belt or manual 4 of 8

5 Fast tools change by the direct front machine s opening that means low time and cost for maintenance and cleaning Air and water mixer to humidify the raw material Easy refiner mill installation over the hopper of the pellet machine Easy installation under a saw dust or wood shaving silos Easy pellet machine management General specifications of N-MICRO pellet mill: Pellet mill with mechanical and electrical functioning system Manual rollers regulation (tools that permit the rotation of the dies) Saw dust loading system is composed by a hopper and a screw (regulated by an inverter connected to a power regulator or PLC) Dies holes length from 12 to 55 mm, in accordance to the raw materials we are going to pelletize (saw dust or other vegetal or agricultural residuals) Side pellet unloading, connectable to suction plug to remove dust and powder Vegetable oil for start/end production cycle (to avoid saw dust hardness inside the dies during machinery stop), manual adding or motorized with oil pump (optional) Manual grease lubrication for engine Manual grease lubrication for rollers and drill Engine area hardware protected Connectable for dust catcher line Mechanical sensor level Electrical safety locks Instruction manual and CE conformity certificate Nova Pellet staff is able to supply immediate and complete assistance and support on its pellet mills installed all over the world. Besides, Nova Pellet projects, manufactures and supplies all spare parts of all the models of Pellet Mill Machinery: 5 of 8

6 DIE AND ROLLERS HAMMER MØLLE 6 of 8

7 Nova Pellet projected and developed a special refiner mill N-RAFF to install upon N-MICRO pellet machine. N-RAFF permits to refine thin wood chip, wood shavings and saw dust directly upon the pellet machine, therefore you can gain of a direct preparation of your raw material for pelletizing, allowing the easy installation of the all system under a cereals, saw dust or wood shaving silo. HAMMER MØLLE N-RAFF A B ELECTRIC POWER Active power installed 3 Kw 4 Kw SAW DUST PRODUCTION PER HOUR Wood shaving or saw dust Thin wood chip Agricultural residual (Cereals, manure etc.) 40/100 50/110 30/80 40/90 70/120 80/130 In the following picture you can see the N-MICRO pellet mill installed with the N-RAFF refiner mill in a sole compact body, together with a raw material mini-silo and loading screw: 7 of 8

8 Lav dine egne piller! 8 of 8