Ships and marine technology Survival equipment for survival craft and rescue boats
|
|
|
- Bent Lindegaard
- 9 år siden
- Visninger:
Transkript
1 Dansk standard DS/ISO udgave Skibs- og marineteknologi Overlevelsesudstyr til redningsbåde og mand-overbord-både Ships and marine technology Survival equipment for survival craft and rescue boats
2 DS/ISO København DS projekt: ICS: Første del af denne publikations betegnelse er: DS/ISO, hvilket betyder, at det er en international standard, der har status som dansk standard Denne publikations overensstemmelse er: IDT med: ISO 18813:2006. DS-publikationen er på engelsk. DS-publikationstyper Dansk Standard udgiver forskellige publikationstyper. Typen på denne publikation fremgår af forsiden. Der kan være tale om: Dansk standard standard, der er udarbejdet på nationalt niveau, eller som er baseret på et andet lands nationale standard, eller standard, der er udarbejdet på internationalt og/eller europæisk niveau, og som har fået status som dansk standard DS-information publikation, der er udarbejdet på nationalt niveau, og som ikke har opnået status som standard, eller publikation, der er udarbejdet på internationalt og/eller europæisk niveau, og som ikke har fået status som standard, fx en teknisk rapport, eller europæisk præstandard DS-håndbog samling af standarder, eventuelt suppleret med informativt materiale DS-hæfte publikation med informativt materiale Til disse publikationstyper kan endvidere udgives tillæg og rettelsesblade DS-publikationsform Publikationstyperne udgives i forskellig form som henholdsvis fuldtekstpublikation (publikationen er trykt i sin helhed) godkendelsesblad (publikationen leveres i kopi med et trykt DS-omslag) elektronisk (publikationen leveres på et elektronisk medie) DS-betegnelse Alle DS-publikationers betegnelse begynder med DS efterfulgt af et eller flere præfikser og et nr., fx DS 383, DS/EN 5414 osv. Hvis der efter nr. er angivet et A eller Cor, betyder det, enten at det er et tillæg eller et rettelsesblad til hovedstandarden, eller at det er indført i hovedstandarden. DS-betegnelse angives på forsiden. Overensstemmelse med anden publikation: Overensstemmelse kan enten være IDT, EQV, NEQ eller MOD IDT: Når publikationen er identisk med en given publikation. EQV: Når publikationen teknisk er i overensstemmelse med en given publikation, men præsentationen er ændret. NEQ: Når publikationen teknisk eller præsentationsmæssigt ikke er i overensstemmelse med en given standard, men udarbejdet på baggrund af denne. MOD: Når publikationen er modificeret i forhold til en given publikation.
3 INTERNATIONAL STANDARD ISO First edition Ships and marine technology Survival equipment for survival craft and rescue boats Navires et technologie maritime Équipement de survie pour embarcations de survie et bateaux de sauvetage Reference number ISO 18813:2006(E) ISO 2006
4 PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO 2006 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel Fax [email protected] Web ii ISO 2006 All rights reserved
5 Contents Page Foreword... v Introduction... vi 1 Scope Normative references Terms, definitions and abbreviated terms Terms and definitions Abbreviated terms Design and performance requirements General Bailer (LR, LB, RB LSA Code , , ) Bilge pump (manual) (LB, LB/RB LSA Code ) Boathook (LB, RB LSA Code , , ) Bucket (LB, RB LSA Code , ) Compass (LB, RB LSA Code , ) Container, liferaft equipment (LR LSA Code ) Dipper (LB LSA Code ) Drinking vessel (cup) (LR, LB LSA Code , ) Electric torch (LR, LB, RB LSA Code , , ) Fire-extinguishing equipment, portable (fire extinguishers) (LB, RB LSA Code , ) First-aid outfit (LR, LB, RB LSA Code , , ) Fishing kit (set of fishing tackle) (LR, LB LSA Code , ) Flare, hand red (LR, LB LSA Code , ) Flare, rocket parachute (LR, LB LSA Code , ) Handholds/lifelines (LB, RB LSA Code , ) Hatchet [LB, rigid; RB (optional) LSA Code , ] Instructions for immediate action (LR LSA Code ) Jack-knife [LR (optional); LB, rigid; RB (optional) LSA Code , , ] Knife, buoyant (non-folding safety type) (LR, RB , , ) Ladder (rigid LR, LB LSA Code , ) Lighting system (interior) (LR, LB, RB LSA Code , ) Mirror, signalling, daylight (LR, LB LSA Code , ) Oars or paddles (LB, RB LSA Code , , IMO Recommendation on Testing of Life-Saving Appliances, section 1/7.1.8) Oarlocks or equivalent devices for all lifeboats and rescue boats carrying oars (LB, RB LSA Code , ) Paddle (liferaft) (LR LSA Code ) Painter (LB, RB) Pump (inflatable LR, inflated RB LSA Code , ) Radar reflector (LR, LB, RB) Rainwater collection equipment for lifeboats (LB LSA Code ) Rations, food (LR, LB LSA Code , ) Repair kit (LR, inflated and rigid/inflated RB LSA Code ) Rescue quoit, buoyant (LR, LB, RB LSA Code , , ) Scissors (LR LSA Code ) Sea anchor (LR, LB, RB LSA Code , , ) Searchlight (LB, RB LSA Code , ; IMO Recommendation on Testing of Life-Saving Appliances, section 1/13) Seasickness kit (anti-seasickness medicine and seasickness bag) (LR, LB LSA Code , ) ISO 2006 All rights reserved iii
6 4.38 Smoke signal, buoyant (LR, LB, RB LSA Code , ) Sponge (LR, LB-old LSA Code ) Survival instructions or manual (LR, LB LSA Code , ) Table of lifesaving signals (LR, LB LSA Code , ) Thermal protective aid (LR, LB, RB LSA Code , , ) Tin (can)-opener (LR, LB LSA Code , , ) Tool kit (LB LSA Code ) Towline (RB LSA Code ) Water (LR, LB LSA Code , ) Whistle (or equivalent sound signal) (LR, LB, RB LSA Code , , ) Format of instructional materials Annex A (informative) Maintenance and periodic inspection guidelines iv ISO 2006 All rights reserved
7 Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO was prepared by Technical Committee ISO/TC 8, Ships and marine technology, Subcommittee SC 1, Lifesaving and fire protection. ISO 2006 All rights reserved v
8 Introduction This International Standard contains detailed specifications for various items of survival equipment carried in survival craft and rescue boats in compliance with the IMO LSA Code. For each item, the relevant subclause title specifies the name of the item, the types of craft in which it is required (LR = liferafts, LB = lifeboats, RB = rescue boats, LB/RB = combined life/rescue boats), and (in the same order) the specific sections of the LSA Code that require it. However, compliance of a product with this International Standard does not relieve the manufacturer of a survival craft or rescue boat of the responsibility to evaluate the suitability of the product in their particular application. For the sake of completeness, certain items of equipment which pre-date the LSA Code, but which are still often carried on existing ships, are addressed in informative Annex A. For these items, the type of craft specified in the subclause title is followed by the suffix old (e.g., LB old ). vi ISO 2006 All rights reserved
9 INTERNATIONAL STANDARD ISO 18813:2006(E) Ships and marine technology Survival equipment for survival craft and rescue boats 1 Scope This International Standard specifies design, performance, and use of various items of survival equipment carried in survival craft and rescue boats complying with the International Convention for the Safety of Life at Sea (SOLAS), 1974 (as amended), and the International Maritime Organization Life-Saving Appliance Code (LSA Code). For many items, it also includes guidelines for maintenance and periodic inspections by Administrations or ships crews in informative Annex A. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 613:2000, Ships and marine technology Magnetic compasses, binnacles and azimuth reading devices Class B ISO 8729:1997, Ships and marine technology Marine radar reflectors ISO 10316:1990, Shipbuilding Class B magnetic compasses Tests and certification ISO 17339:2002, Ships and marine technology Sea anchors for survival craft and rescue boats ISO 24432, Ships and marine technology Thermal protective aids with sleeves 1) International Code for Fire Safety Systems, 2001 [Resolution MSC.98(73)], International Maritime Organization International Code of Signals, 2005, International Maritime Organization International Life-Saving Appliance (LSA) Code [Resolution MSC.48(66)], International Maritime Organization International Safety Management (ISM) Code and guidelines on implementation of the ISM Code, International Maritime Organization Recommendation on Testing of Life-Saving Appliances [Resolution A.689(17), as amended through Resolution MSC.81(70)], International Maritime Organization IMO MSC/Circular 1048, Performance standards and performance tests for manually powered reverse osmosis desalinators IMO Resolution A.384(X), Performance standards for radar reflectors IMO Resolution A.657(16), Instructions for action in survival craft 1) To be published. ISO 2006 All rights reserved 1
Informationsteknologi Åben distribueret databehandling Referencemodel: Arkitektonisk semantik Tillæg 1: Computerbaserede formler
Dansk Standard Tillæg DS/ISO/IEC 10746-4/Amd.1 1. udgave 2002-06-04 Informationsteknologi Åben distribueret databehandling Referencemodel: Arkitektonisk semantik Tillæg 1: Computerbaserede formler Information
Skibs- og marineteknologi Liste over maritime standarder
Dansk standard DS/ISO 15583 1. udgave 2005-07-14 Skibs- og marineteknologi Liste over maritime standarder Ships and marine technology Maritime standards list DS/ISO 15583 København DS projekt: M205531
Mekaniske vibrationer Vurdering af maskinvibrationer ved måling på ikkeroterende dele Del 1: Generelle retningslinjer
Dansk standard Tillæg DS/ISO 10816-1/Amd 1 1. udgave 2014-08-14 Mekaniske vibrationer Vurdering af maskinvibrationer ved måling på ikkeroterende dele Del 1: Generelle retningslinjer Mechanical vibration
Jordbrug Traktorer Bagmonteret trepunktsophæng Kategori 1N, 1, 2N, 2, 3N, 3, 4N og 4
Dansk standard DS/ISO 730 1. udgave 2009-02-10 Jordbrug Traktorer Bagmonteret trepunktsophæng Kategori 1N, 1, 2N, 2, 3N, 3, 4N og 4 Agricultural wheeled tractors Rear-mounted three-point linkage Categories
Hjælpemidler til stomi og inkontinens Udskylningssæt Krav og prøvningsmetoder
Dansk standard DS/ISO 16391 1. udgave 2002-11-28 Hjælpemidler til stomi og inkontinens Udskylningssæt Krav og prøvningsmetoder Aids for ostomy and incontinence Irrigation sets Requirements and test methods
Motorkøretøjer Fartskriversystemer Del 2: Elektrisk grænseflade med optageenhed
Dansk standard DS/ISO 16844-2 1. udgave 2011-04-08 Motorkøretøjer Fartskriversystemer Del 2: Elektrisk grænseflade med optageenhed Road vehicles Tachograph systems Part 2: Electrical interface with recording
Technical drawings General principles of presentation Part 1: Introduction and index
Dansk standard DS/ISO 128-1 1. udgave 2006-12-15 Teknisk tegning Almene tegneregler Del 1: Introduktion og oversigt Technical drawings General principles of presentation Part 1: Introduction and index
Teknisk produktdokumentation Dokumenttyper
Dansk standard DS/ISO 29845 1. udgave 2011-09-30 Teknisk produktdokumentation Dokumenttyper Technical product documentation Document types DS/ISO 29845 København DS projekt: M245068 ICS: 01.110 Første
Sensorisk analyse Metodologi Sekventiel analyse
Dansk standard DS/ISO 16820 1. udgave 2004-07-28 Sensorisk analyse Metodologi Sekventiel analyse Sensory analysis Methodology Sequential analysis DS/ISO 16820 København DS projekt: 49367 ICS: 67.240 Deskriptorer:
Ships and marine technology Computer applications Shipboard loading instruments
Dansk standard DS/ISO 16155 1. udgave 2006-05-19 Skibs- og marineteknologi Computerapplikationer Hjælpemiddel til lastning Ships and marine technology Computer applications Shipboard loading instruments
Malinger og lakker Bestemmelse af bestandighed mod cykliske korrosionsbetingelser Del 1: Vådt (salttåge)/tørt/fugtigt
Dansk standard DS/EN ISO 11997-1 1. udgave 2006-03-06 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 11997-1:2006 Malinger og lakker Bestemmelse af bestandighed mod cykliske
Kød og kødprodukter. Måling af ph-værdi. Referencemetode
Dansk Standard DS/ISO 2917 1. udgave Godkendt:2000-04-27 Kød og kødprodukter. Måling af ph-værdi. Referencemetode Meat and meat products - Measurement of ph - Reference method DANSK STANDARD - Eftertryk
Kirurgiske implantater Intramedullære
Dansk standard DS/ISO 15142-2:2003 1. udgave 2015-09-15 Kirurgiske implantater Intramedullære sømsystemer af metal Del 2: Låsekomponenter Implants for surgery Metal intramedullary nailing systems Part
Kirurgiske implantater Delvis og hel hofteledsprotese Del 2: Ledflader lavet af metalliske og keramiske materialer og plastmaterialer
Dansk standard DS/ISO 7206-2 1. udgave 2014-09-22 Kirurgiske implantater Delvis og hel hofteledsprotese Del 2: Ledflader lavet af metalliske og keramiske materialer og plastmaterialer Implants for surgery
Jordbrug Traktorer Bagmonteret trepunktsophæng Kategori 1N, 1, 2N, 2, 3N, 3, 4N og 4
Dansk standard Tillæg DS/ISO 730/Amd 1 1. udgave 2014-08-05 Jordbrug Traktorer Bagmonteret trepunktsophæng Kategori 1N, 1, 2N, 2, 3N, 3, 4N og 4 Agricultural wheeled tractors Rear-mounted threepoint linkage
Sensorisk analyse Retningslinjer for brug af kvantitative responsskalaer
Dansk standard DS/ISO 4121 1. udgave 2003-12-19 Sensorisk analyse Retningslinjer for brug af kvantitative responsskalaer Sensory analysis Guidelines for the use of quantitative response scales DS/ISO 4121
Elektronisk arkivering Del 1: Specifikationer vedrørende udvikling og drift af et informationssystem til sikring af elektroniske dokumenter
Dansk standard DS/ISO 14641-1 1. udgave 2012-02-29 Elektronisk arkivering Del 1: Specifikationer vedrørende udvikling og drift af et informationssystem til sikring af elektroniske dokumenter Electronic
Teknisk tegning Almene tegneregler Del 25: Linjer på skibsbygningstegninger
Dansk Standard DS/ISO 128-25 1. udgave 2001-12-06 Teknisk tegning Almene tegneregler Del 25: Linjer på skibsbygningstegninger Technical drawings General principles of presentation Part 25: Lines on shipbuilding
Teknisk tegning Grafiske skemasymboler Del 1: Generel information og overordnede indekser
Dansk standard DS/ISO 14617-1 1. udgave 2006-02-22 Teknisk tegning Grafiske skemasymboler Del 1: Generel information og overordnede indekser Graphical symbols for diagrams Part 1: General information and
Teknisk tegning Almene tegneregler Del 50: Grundlæggende regler for angivelse af områder på snitafbildninger og snit
Dansk Standard DS/ISO 128-50 1. udgave 2002-05-21 Teknisk tegning Almene tegneregler Del 50: Grundlæggende regler for angivelse af områder på snitafbildninger og snit Technical drawings General principles
Kvalitetsstyringssystemer Vejledning for konfigurationsstyring
Dansk standard DS/ISO 10007 2. udgave 2003-08-27 Kvalitetsstyringssystemer Vejledning for konfigurationsstyring Quality management systems Guidelines for configuration management DS/ISO 10007 København
Informationsteknologi Automatisk identifikation og datafangstteknikker Kode 128 stregkode symbologispecifikation
Dansk standard DS/ISO/IEC 15417 2. udgave 2007-06-18 Informationsteknologi Automatisk identifikation og datafangstteknikker Kode 128 stregkode symbologispecifikation Information technology Automatic identification
COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/ISO/IEC 13818-6/Amd.2:2000
Dansk Standard Tillæg DS/ISO/IEC 13818-6/Amd.2 1. udgave Godkendt:2000-08-29 Informationsteknologi Generisk kodning af levende billeder og tilhørende lydinformation Del 6: Udvidelser til DSM-CC Tillæg
Yogurt Determination of total solids content (Reference method)
Dansk standard DS/ISO 13580 1. udgave 2005-07-06 Yoghurt Bestemmelse af tørstofindhold (referencemetode) Yogurt Determination of total solids content (Reference method) DS/ISO 13580 København DS projekt:
Teknisk tegning Almene tegneregler Del 40: Grundlæggende regler for snitafbildninger og snit
Dansk Standard DS/ISO 128-40 1. udgave 2002-05-21 Teknisk tegning Almene tegneregler Del 40: Grundlæggende regler for snitafbildninger og snit Technical drawings General principles of presentation Part
Mikrobiologisk undersøgelse af fødevarer og foderstoffer Bestemmelse af vandaktivitet
Dansk standard DS/ISO 21807 1. udgave 2004-09-29 Mikrobiologisk undersøgelse af fødevarer og foderstoffer Bestemmelse af vandaktivitet Microbiology of food and animal feeding stuffs Determination of water
Akustik Lydisolering af rør, ventiler og flanger
Dansk standard DS/ISO 15665 1. udgave 2003-10-31 Akustik Lydisolering af rør, ventiler og flanger Acoustics Acoustic insulation for pipes, valves and flanges DS/ISO 15665 København DS projekt: 46664 ICS:
Koniske forbindelser med 6 % (Luer) studs for sprøjter, kanyler og andet særligt medicinsk udstyr Låsbare forbindelser
Dansk standard DS/ISO 594-2 1. udgave 1992-01-21 Koniske forbindelser med 6 % (Luer) studs for sprøjter, kanyler og andet særligt medicinsk udstyr Låsbare forbindelser Conical fittings with a 6% (Luer)
Aircraft De-icing/anti-icing fluids ISO type I
Dansk standard DS/ISO 11075 1. udgave 2007-05-10 Fly Væske til afisning/antiisning ISO-type I Aircraft De-icing/anti-icing fluids ISO type I DS/ISO 11075 København DS projekt: M214008 ICS: 49.100 Første
Dansk standard DS/ISO/IEC 27033-5
Dansk standard DS/ISO/IEC 27033-5 1. udgave 2013-09-02 Informationsteknologi Sikkerhedsteknikker Netværkssikkerhed Del 5: Sikring af kommunikation mellem netværk, der anvender virtuelle private netværk
Elektronisk dokumentstyring Ordliste Del 1: Elektronisk billeddannelse af dokumenter
Dansk standard DS/ISO 12651-1 2. udgave 2012-02-29 Elektronisk dokumentstyring Ordliste Del 1: Elektronisk billeddannelse af dokumenter Electronic document management Vocabulary Part 1: Electronic document
Miljømærkning Egendeklaration af miljøpåstande (Type II miljømærkning)
Dansk standard Tillæg DS/EN ISO 14021/A1 1. udgave 2012-02-08 Miljømærkning Egendeklaration af miljøpåstande (Type II miljømærkning) Environmental labels and declarations Self-declared environmental claims
Skibs- og marineteknologi Landgangsstiger
Dansk standard DS/ISO 5489 1. udgave 2008-04-21 Skibs- og marineteknologi Landgangsstiger Ships and marine technology Embarkation ladders DS/ISO 5489 København DS projekt: 55057 ICS: 47.020.50 Første del
Trykluft Del 3: Prøvningsmetoder til måling af fugtighed
Dansk Standard DS/ISO 8573-3 1. udgave Godkendt:2001-03-01 Trykluft Del 3: Prøvningsmetoder til måling af fugtighed Compressed air Part 3: Test methods for measurement of humidity DANSK STANDARD - Eftertryk
Acoustics Description, measurement and assessment of environmental noise Part 2: Determination of environmental noise levels
Dansk standard DS/ISO 1996-2 2. udgave 2007-06-20 Akustik Måling, beskrivelse og vurdering af ekstern støj Del 2: Bestemmelse af eksterne støjniveauer Acoustics Description, measurement and assessment
Informationsteknologi Sikkerhedsteknikker
Dansk standard DS/ISO/IEC 27005 1. udgave 2008-06-20 Informationsteknologi Sikkerhedsteknikker Ledelsessystem for risikostyring Information technology Security techniques Information security risk management
Cigaretter. Bestemmelse af nikotin i røgkondensat. Gaskromatografisk metode.
Dansk Standard DS/ISO 10315 2. udgave Godkendt:2000-05-25 Cigaretter. Bestemmelse af nikotin i røgkondensat. Gaskromatografisk metode. Cigarettes - Determination of nicotine in smoke condensates - Gas-chromatographic
