SORTIMENTSOVERSIGT DECEMBER 2011 INDHOLD NÅLETRÆS KRYDSFINER... 2 BRASIL TAG/GULV TG-2 (GUARA-PLY)... 2 ENVIRO-PLY (SUDATI) TAG/GULV TG-2, HALVFORMAT... 3 RUSSISK FYR B/C... 4 POLSK FYR KRYDSFINER (B/BB)... 5 PROFILEREDE PLADER... 6 ELLIOTIS PINE C+/C... 7 PLANKEVÆRK MCX... 7 OSB... 8 BOLDERAJA... 8 FILMBELAGT KRYDSFINER... 9 BIRK FILM / FILM (STØBE KRYDSFINER)... 9 BIRK NET / FILM (KARROSSERI-PLADER)... 9 ØSTEN FILM / FILM 1250 x 2500 mm... 10 ØSTEN FILM / FILM 1500 x 3000 mm... 11 ØSTEN NET / FILM 1500 x 3000 mm... 11 HÅRDTTRÆS KRYDSFINER... 12 ØSTEN MALAY BB/CC, MTCC... 12 VIROLA BB/CC... 13 BIRK KRYDSFINER B/BB... 14 TRÆFIBER PLADER... 15 MELAMINSPÅN, HVID 2 SIDER... 16 MDF... 17 FUGT-BESTANDIG MDF (lagerføres ikke)... 18 BRANDHÆMMENDE MDF (lagerføres ikke)... 19 1
NÅLETRÆS KRYDSFINER BRASIL TAG/GULV TG-2 (GUARA-PLY) Brasilien Elliotis Pine 2440 x 1220/610 mm 475 kg / m3 Certificering CE2+, FSC muligt WBP, exterior Kvalitet P&TS el. C+/C TAG/GULV TG-2 Certifikat Ref.. 1034 CPD 12981/2/10 Montering: Iflg. vejledning, se hjemmeside 2 BRASIL TAG/GULV TG-2 (2440 x 1220 mm) Tykkelse Finerlag stk / bdt Varenr. Kg / plade m2 / bdt Kg / bdt m3 / bdt bdt / bil m2 / bil m3 / bil 12 mm 5 75 9692652 17,0 223,260 1.273 2,679 20 4.465,200 53,582 15 mm 5 60 9692653 21,2 178,608 1.273 2,679 20 3.572,160 53,582 18 mm 7 50 9692654 25,5 148,840 1.273 2,679 20 2.976,800 53,582 21 mm 7 43 9692655 29,7 128,002 1.277 2,688 20 2.560,048 53,761
ENVIRO-PLY (SUDATI) TAG/GULV TG-2, HALVFORMAT Brasilien Elliotis Pine 2440 x 610 mm 475 kg / m3 Certificering CE2+, FSC muligt WBP, exterior Kvalitet P&TS el. C+/C TAG/GULV TG-2 Certifikat Ref.: 1034 CPD 12983/1/10 Montering: Iflg. vejledning, se hjemmeside 3 BRASIL TAG/GULV TG-2 (2440 x 610 mm) Tykkelse Finerlag stk / bdt Varenr. Kg / plade m2 / bdt Kg / bdt m3 / bdt bdt / bil m2 / bil m3 / bil 12 mm 5 150 9692656 8,5 223,260 1.273 2,679 20 4.465,200 53,582 15 mm 5 120 9692657 10,6 178,608 1.273 2,679 20 3.572,160 53,582 18 mm 7 100 9692658 12,7 148,840 1.273 2,679 20 2.976,800 53,582 21 mm 7 86 9692660 14,8 128,002 1.277 2,688 20 2.560,048 53,761
RUSSISK FYR B/C Rusland Certificering CE 2+ Nåletræ WBP, vandfast 2440 x 1220 mm Formål Ren front-finer. Kvalitet B/C (I/ III) 575 kg / m3 mm Finerlag stk / bdt Varenr. Kg / plade m2 / bdt Kg / bdt m3 / bdt 6,5 3 60 9690694 11,1 178,608 668 1,161 9 5 92 9690695 15,4 273,866 1.417 2,465 12 5 70 9690696 20,5 208,376 1.438 2,501 15 7 55 9690697 25,7 163,724 1.412 2,456 18 9 46 9690698 30,8 136,933 1.417 2,465 21 11 40 9690699 35,9 119,072 1.438 2,501 4 Forside (B) Bagside (C)
POLSK FYR KRYDSFINER (B/BB) Certificering Formål Polen Nåletræ 2440 x 1220 mm 650 kg / m3 CE WBP, vandfast Pæn dekorativ plade. 5 Tykkelse Finerlag stk / bdt Varenr. Kg/plade m2 / bdt Kg / bdt m3 / bdt 4 mm 3 100 9691022 7,7 297,680 774 1,191 6 mm 3 68 9691023 11,6 202,422 789 1,215 9 mm 5 44 9691024 17,4 130,979 766 1,179 12 mm 7 33 9691025 23,2 98,234 766 1,179
PROFILEREDE PLADER PRIMA-TEX (I/III) Rusland Certificering CE Russisk Fyr/Sib.Lærk WBP, vandfast 2440 x 1220 mm Formål Udvendig beklædning. Kvalitet PRIMA-TEX (I/III) 575 kg / m3 6 mm Finerlag stk / bdt Varenr. Kg / plade m2 / bdt Kg / bdt m3 / bdt 9 5 92 96 91 018 15,4 273,866 1.417 2,465 12 5 70 96 91 019 20,5 208,376 1.438 2,501 BYG-TEX (II/III) Chile Certificering CE Radiata Pine WBP, vandfast 2440 x 1220 mm Formål Udvendig beklædning. Kvalitet BYG-TEX (B/C) 575 kg / m3 mm Finerlag stk / bdt Varenr. Kg / plade m2 / bdt Kg / bdt m3 / bdt 9 5 100 96 91 020 15,4 297,680 1.540 2,679 12 5 80 96 91 021 20,5 238,144 1.643 2,858
ELLIOTIS PINE C+/C Brasilien / Sydamerika Nåletræ (Elliotis el. Taeda) 2440 x 1220 mm Ca. 450-500 kg / m3 Certificering CE 4 WBP, vandfast Kvalitet C+/C, repareret og pudset forside Formål Emballage, tagfod el. lign. 7 Tykkelse Finerlag stk / bdt Varenr. Kg / plade m2 / bdt Kg / bdt m3 / bdt 6 mm 5 150 9,0 446,52 1.350 2,679 9 mm 3/5 100 9690964 12,1 297,680 1.206 2,679 12 mm 5 75 9690965 16,1 223,260 1.206 2,679 15 mm 5 60 9690966 20,1 178,608 1.206 2,679 18 mm 5/7 50 9690967 24,1 148,840 1.206 2,679 21 mm 7 43 9690968 28,1 128,002 1.210 2,688 PLANKEVÆRK MCX Certificering Formål Sydamerika / Kina / USA mv. Nåletræ / Poppel mv 2440 x 1220 mm Ca. 450 kg / m3 Ingen CE mærkning WBP, exterior Plankeværk, afdækning mv. Tykkelse Finerlag stk / bdt Varenr. Kg / plade m2 / bdt Kg / bdt m3 / bdt 9 mm 3/5 100 9691308 12,1 297,680 1.206 2,679 12 mm 5 75 9691309 16,1 223,260 1.206 2,679 15 mm 5 60 9691310 20,1 178,608 1.206 2,679 18 mm 5/7 50 9691311 24,1 148,840 1.206 2,679 21 mm 7 43 9691312 28,1 128,002 1.210 2,688
OSB BOLDERAJA Letland Certificering CE og FSC Nåletræ WBP, vandfast 2440/3050 x 1220/610 mm Formål OSB 3 TG-2 Konstruktion, Tag (Ext.) 600-650 kg / m3 Formål OSB 2 SE Byggeplade (Int.) OSB 3 (ext.) TG-2 (2440 x 1220 mm) mm stk / bdt Varenr. Kg / plade m2 / bdt Kg / bdt m3 / bdt bdt / bil m2 / læs 12 59 9690872 22,4 175,631 1.324 2,108 18 3.161,362 15 47 9690873 27,0 139,910 1.270 2,099 19 2.658,282 18 39 9690874 32,0 116,095 1.250 2,090 19 2.205,809 22 32 9690875 38,5 95,258 1.232 2,096 19 1.809,894 8 OSB 2 (int.) Retkantet (2440 x 1220 mm) mm stk / bdt Varenr. Kg / plade m2 / bdt Kg / bdt m3 / bdt bdt / bil m2 / læs 9 75 96 90 876 16,9 223,260 1.264 2,009 18 4.018,680 11 64 9690877 20,5 190,515 1.312 2,096 18 3.429,274 15 47 9690878 27,0 139,910 1.270 2,099 19 2.658,282 18 39 9690879 32,0 116,095 1.250 2,090 19 2.205,809 OSB Halvformat (Bolderaja) Tykkelse stk / bdt Varenr. m2 / bdt Kg / plade m3 / bdt bdt / bil m2 / bil m3 / bil 15 mm 47 2440 x 610 9691350 69,955 13,5 1,049 38 2.658,282 39,874 18 mm 39 2440 x 610 9691351 58,048 16,0 1,045 38 2.205,809 39,705 18 mm 39 3050 x 560 96 94 052 66,61 18,0 1,199 33 2.198,196 39,568
FILMBELAGT KRYDSFINER BIRK FILM / FILM (STØBE KRYDSFINER) Polen / Rusland Certificering CE, FSC muligt. Birk (100%) WBP, vandfast 2500 x 1250 mm Formål Støbning, Karrosseriplader. 675-725 kg / m3 Bundt-størrelse Halve bundter 9 Tykkelse Finerlag Stk / bdt Varenr. Kg / plade m2 / bdt m3 / bdt Kg / bdt 6,5 mm 5 60 9691390 14,2 187,500 1,219 853 9 mm 7 44 9690903 19,7 137,500 1,238 866 12 mm 7/9 33 9690904 26,3 103,125 1,238 866 15 mm 9/11 27 9690905 32,8 84,375 1,266 886 18 mm 13/15 22 9690906 39,4 68,750 1,238 866 21 mm 15/17 20 9690907 45,9 62,500 1,313 919 27 mm 17/19 17 9690908 59,1 53,125 1,434 932 30 mm 19/23 15 9690909 65,6 46,875 1,406 914 BIRK NET / FILM (KARROSSERI-PLADER) Tykkelse Finerlag Stk / bdt Varenr. Kg / plade m2 / bdt m3 / bdt Kg / bdt 9 mm 7 44 9690910 19,7 137,500 1,238 866 12 mm 7/9 33 9690911 26,3 103,125 1,238 866 15 mm 9/11 27 9690912 32,8 84,375 1,266 886 18 mm 13/15 22 9690913 39,4 68,750 1,238 866 21 mm 15/17 20 9690914 45,9 62,500 1,313 919 27 mm 17/19 17 9690915 59,1 53,125 1,434 932 30 mm 19/23 15 9690916 65,6 46,875 1,406 914 BEMÆRK: VED OPSKÆRING AF PLADERNE, SKAL DISSE KANTFORSEGLES PÅ UBEHANDLEDE FLADER.
ØSTEN FILM / FILM 1250 x 2500 mm STØBE KRYDSFINER Kvalitet Film Kina Poppel / Hårdttræ 1250 x 2500 mm 500-550 kg / m3 Exterior limet Film-belagt, glat 2 sider 120 gr./m2 Fenolfilm 10 PAKKE INFO Tykkelse Varenr. Stk / bdt m2 / bdt m3 / bdt Kg / plade Kg / bdt bdt / bil m2 / bil m3 / bil 8 mm 9693703 112 350,000 2,800 12,5 1.400 16 5.600,00 44,80 12 mm 9692450 75 234,375 2,813 19,9 1.491 16 3.750,00 45,00 15 mm 9692451 60 187,500 2,813 24,8 1.491 16 3.000,00 45,00 18 mm 9692452 50 156,250 2,813 29,8 1.491 16 2.500,00 45,00 21 mm 9692453 43 134,375 2,822 34,8 1.496 16 2.150,00 45,15 BEMÆRK: VED OPSKÆRING AF PLADERNE, SKAL DISSE KANTFORSEGLES PÅ UBEHANDLEDE FLADER.
ØSTEN FILM / FILM 1500 x 3000 mm Kvalitet Film Kina Eucalyptus / Hårdttræ 1500 x 3000 mm 600-650 kg / m3 Exterior limet Film-belagt, glat 2 sider 120 gr./m2 Fenolfilm 11 ØSTEN FILM / FILM 1500 x 3000 mm Tykkelse Finer-lag Varenr. Stk / bdt m2 / bdt m3 / bdt Kg / plade Kg / bdt 12 mm 7 9694067 30 135,000 1,620 33,8 1.013 15 mm 9 9694068 25 112,500 1,688 42,2 1.055 18 mm 11 9694069 21 94,500 1,701 50,6 1.063 21 mm 13 9694070 18 81,000 1,701 59,1 1.063 ØSTEN NET / FILM 1500 x 3000 mm Kvalitet Film Kina Eucalyptus / Hårdttræ 1500 x 3000 mm 600-650 kg / m3 Exterior limet Film-belagt, glat 2 sider 240 gr/120 gr/m2 Fenolfilm ØSTEN NET / FILM 1500 x 3000 mm Tykkelse Finer-lag Varenr. Stk / bdt m2 / bdt m3 / bdt Kg / plade Kg / bdt 12 mm 7 9694071 30 135,000 1,620 33,8 1.013 15 mm 9 9694072 25 112,500 1,688 42,2 1.055 18 mm 11 9694073 21 94,500 1,701 50,6 1.063 21 mm 13 9694074 18 81,000 1,701 59,1 1.063
HÅRDTTRÆS KRYDSFINER ØSTEN MALAY BB/CC, MTCC Certificering Kvalitet Malaysia Hårdt-træ 2440 x 1220 mm 550-600 kg / m3 CE og MTCC WBP, exterior BB/CC, rødlig frontfiner 12 Tykkelse Finerlag stk / bdt Varenr. Kg / plade m2 / bdt m3 / bdt Kg / bdt 3,6 3 250 9692397 6,0 744,200 2,679 1.500 6 3 150 9692398 9,2 446,520 2,456 1.375 9 5 100 9692399 15,0 297,680 2,679 1.500 12 5 75 9692400 20,0 223,260 2,679 1.500 15 7 60 9692401 25,0 178,608 2,679 1.500 18 7 50 9692402 30,0 148,840 2,679 1.500 21 9 43 9692403 35,0 128,002 2,688 1.505
VIROLA BB/CC Certificering Kvalitet Brasilien Hårdt-træ (Virola/Amescla) 2440 x 1220 mm 600-650 kg / m3 CE WBP, vandfast BB/CC 13 Tykkelse Finerlag Stk / Bdt Varenr. Kg / plade m2 / bdt m3 / bdt Kg / bdt 4 mm 3 225 9690880 7,1 669,780 2,679 1.607 6 mm 3 165 9690881 9,8 491,172 2,701 1.621 9 mm 5 100 9690882 16,1 297,680 2,679 1.607 12 mm 5 75 9690883 21,4 223,260 2,679 1.607 15 mm 7 60 9690884 26,8 178,608 2,679 1.607 18 mm 7 50 9690885 32,1 148,840 2,679 1.607 21 mm 9 43 9690886 37,5 128,002 2,688 1.613
BIRK KRYDSFINER B/BB, kvalitet Certificering Rusland Birk B/BB & BB/BB Se nedenfor 650 kg / m3 CE WBP (ext.) el. MR (int.) 14 BIRK KRYDSFINER, B/BB, 1525 x 1525 mm (MR) Tykkelse Finerlag Stk. / Bundt Varenr. Kg / plade m2 / bdt m3 / bdt Kg / bdt 4 mm 3 100 9691600 6,0 232,563 0,930 605 6 mm 5 65 9691601 9,1 151,166 0,907 590 9 mm 7 44 9691602 13,6 102,328 0,921 599 12 mm 9 33 9691603 18,1 76,746 0,921 599 15 mm 11 26 9691604 22,7 60,466 0,907 590 1250 x 2500 mm BIRK BB/BB (WBP) mm Finerlag stk / bdt Varenr. Kg / plade m2 / bdt m3 / bdt Kg / bdt 9 7 54 9692365 16,9 168,750 1,519 911 12 9 40 9692366 22,5 125,000 1,500 900 15 11 32 9692367 28,1 100,000 1,500 900 18 13 27 9692368 33,8 84,375 1,519 911 21 15 23 9692369 39,4 71,875 1,509 906
Certificering Formål TRÆFIBER PLADER Polen/Øst-Europa, Skandinavien Nåletræ Se nedenfor & CTS* 900 kg / m3 (porøse 200-250 kg/m3) FSC muligt Afdækning, møbler mv. *CTS=Cut-to-size (tilskårne formater) 15 TRÆFIBER PLADER, ØST-EUROPA Kvalitet Tykkelse Stk / Bdt Varenummer m2 / bdt m3 / bdt Kg / plade Kg / bdt Std / Afdækning 2,5 mm 1220 x 1220 mm 200 9690918 297,680 0,744 3,3 670 Std / Afdækning 2,5 mm 1220 x 2440 mm 200 9690919 595,360 1,488 6,7 1.340 Std / Afdækning 3,0 mm 610 x 1220 mm 400 9691089 297,680 0,893 2,0 804 Std / Afdækning 3,0 mm 1220 x 2440 mm 200 / 150 9691090 595,360 1,786 8,0 1.607 Olie-behandlet 3,0 mm 1220 x 2440 mm 100 / 150 9690922 297,680 0,893 8,0 402 Porøs træ-fiber 12 mm 1220 x 2440 mm 90 9691092 267,912 3,215 7,9 707 TRÆFIBER PLADER, SKANDINAVIEN / VEST-EUROPA Kvalitet Tykkelse Stk / Bdt Varenummer m2 / bdt m3 / bdt Kg / plade Kg / bdt Std / Afdækning 3,0 mm 610 x 1220 mm 400 9693391 297,680 0,744 2,0 804 Std / Afdækning 3,0 mm 1220 x 2440 mm 150 9693390 446,520 1,116 8,0 1.206 Egaliseret 2,9 mm 610 x 1220 mm 400 9694077 297,680 0,893 2,0 804 Hvidmalet 3,0 mm 1220 x 2440 mm 100 9690921 297,680 0,893 4,0 804 Asfalt. træ-fiber 12 mm 1220 x 2440 mm 95 9691119 282,796 0,848 10,2 967
MELAMINSPÅN, HVID 2 SIDER Certificering Kvalitet BELGIEN Nåletræ 2500x1250 & 2500x600 mm 650 kg / m3 CE E1 HVID 2 SIDER & KANTET 2 SIDER 16 MELAMIN-SPÅN, HVID 2 SIDER Tykkelse Varenr. Stk / bdt m2 / bdt m3 / bdt Kg / plade Kg / bdt 10 mm 9692454 42 131,250 1,31 22,2 932 12 mm 9692455 42 131,250 1,58 26,6 1.118 15 mm 9692456 42 131,250 1,97 33,3 1.398 18 mm 9692457 42 131,250 2,36 39,9 1.677 22 mm 9692458 30 93,750 2,06 48,8 1.464 MELAMIN-SPÅN, HVID 2 SIDER, KANTET 2 LANGSIDER Tykkelse Varenr. Stk / bdt m2 / bdt m3 / bdt Kg / plade Kg / bdt 15 mm 9692459 100 150,000 2,40 17,0 1.704 18 mm 9692460 100 150,000 2,70 19,2 1.917
MDF er Certificering Formål Kvalitet Tyskland Nåletræ 2440 x 1220, 2620 x 2070 og 3050 x 1220 mm 700-750 kg / m3 CE, PEFC E1 Indvendigt brug, opskæring, forarbejdning mv Standard 17 TOPAN, SONAE (GLUNZ) MDF Standard, E1, 2440 x 1220 mm Tykkelse Varenr. Stk / bdt m2 / bdt m3 / bdt Kg / plade Kg / bdt 6 mm 9690997 100 297,680 1,79 13,4 1.340 9 mm 9692173 75 223,260 2,01 19,0 1.427 12 mm 9692075 60 178,608 2,14 25,4 1.522 16 mm 9692076 44 130,979 2,10 33,8 1.488 19 mm 9692077 37 110,142 2,09 40,2 1.486 22 mm 9692078 32 95,258 2,10 46,5 1.488 25 mm 9692174 28 83,350 2,08 52,8 1.479 28 mm 9692175 25 74,420 2,08 59,2 1.479 30 mm 9692176 23 69,459 2,08 63,4 1.479 38 mm* 9692177 18 53,582 2,04 80,3 1.446 * lagerføres ikke.
FUGT-BESTANDIG MDF (lagerføres ikke) MDF til anvendelse i fugtige omgivelser. Nedenstående formater og tykkelser er lagerprogram hos vores leverandør. Fugt-bestandig MDF (sortiment, antal plader pr. pakke) Tykkelser 9 12 16 19 22 25 30 1220 x 2130 mm 40 1220 x 2440 mm 80 60 45 40 32 28 24 1220 x 3050 mm 80 60 45 40 32 24 1220 x 3660 mm 20 18 Scope Moisture resistant high density MDF board for use in humid conditions, also suitable for structural applications with instantaneous or short-term load duration. Description High-density MDF with hard, fine sanded surface and particularly screwable core, MUF glued. The board is subject to minimal expansion and swelling in conditions of high humidity. Suitable for load-bearing applications in humid conditions, Umidax can be refined with paper, melamine, veneer, laminate or lacquer. Umidax is made of 100 % softwood and has no coarse fibres in the surface. The board is very easy to mill and has low formaldehyde emission (E1 class). Use of the product The board can be applied in service class 2 (restrictions in temperature and ambient humidity) and can be used in biological hazard classes 1 and 2 of EN 335-3. During and especially after installation the boards must, wherever possible, be optimally protected from any direct contact with water. They must be stacked flat, on a pallet or using a sufficient number of cross members. Boards should not be stored vertically, unless ground contact can be avoided. The board will expand/shrink under variable humidity conditions, albeit to a lesser extent than the MDF Standard, meaning that an expansion space must be provided for at all times. Use suitable sawing, milling and drilling tools. Umidax can be used for structural walls, with a restriction in the load duration class. In service class 2, corrosion resistant fittings must be used, e.g., galvanised steel. Nails or screws should be kept at least 8 mm away from the edge of the board.
BRANDHÆMMENDE MDF (lagerføres ikke) MDF til anvendelse, hvor der kræves en brandhæmmende plade. F.eks. ved off-shore aktiviteter eller special inventar-opgaver. Brandhæmmende MDF findes i 2 brand-klasser, 0 og 1, vi kan tilbyde MDF der opfylder kravene i begge disse klasser i følgende formater og tykkelser. Brandhæmmende MDF (sortiment, antal plader pr. pakke) Tykkelser 6 9 12 50 19 22 25 1220 x 2440 mm 120 80 60 45 40 32 28 1220 x 3050 mm 120 80 60 45 40 32 28 19 Scope Fire retardant high density MDF board for use in dry conditions and in all load duration categories. Description High-density MDF with fine sanded surface, particularly screwable core and excellent fire retardant properties. Suitable for industrial processing for interior decoration products and furniture production. Can be refined with paper, melamine, laminate or veneer. The board is heat- and fire-resistant and has low formaldehyde emission (E1 class). The board is used in particular in public buildings such as hospitals, airports, rest homes, theatres, hotels, etc. Firax withstands extreme heat and fire and has several national and international test reports. Use of the product The board must be applied in service class 1 (restrictions in temperature and ambient humidity) and can only be used in biological hazard class 1 of EN 335-3. The boards must be protected from any direct contact with water. They must be stacked flat, on a pallet or using a sufficient number of cross members. Boards should not be stored vertically, unless ground contact can be avoided. The board will expand or shrink under variable humidity conditions. Use suitable sawing, milling and drilling tools. The fire retarding products and dyes in the board may in exceptional cases affect certain glues or paints. Always perform a test before use.