Præsentation af BETA II hæve/sænke bord

Transkript

1 Præsentation af BETA II hæve/sænke bord

2 Beskrivelse Beta II Hæve/sænkebord: Stel: Bordplade: Bordet er udført i et enkelt og stringent design, der er lagt vægt på stabilitet og funktionalitet. Bordet er CE mærket og er testet efter følgende normer: EN DS/INF 69 ISO punkt 6.6 Stel og kabelbakke er lakeret alufarvet. Søjlerne er 3-delte og højdeintervallet går fra 60 cm. til 126 cm. Bordet kører særdeles lydløst. Pladen er udført i 22 mm. mdf med bøgefinér. Kanten er affaset og lakeret.

3

4 AT - målkrav

5 AT - arbejdspladsen AT-vejledning A.1.15 Hvis næsten alle personer skal kunne anvende arbejdsborde til et armarbejde både i siddende og i stående stilling, bør medarbejderne kunne tilpasse bordene i højden fra 60 til 122 cm. Dette interval vil dække ca. 90 % af de europæiske arbejdstagere.

6 Referencer Vandt udbud og er nu total leverandør til hele Danmark. Har blandt mange projekter lavet fremtidens arbejdsplads samt et pilot projekt for de 1100 medarbejdere i domicilet i Ballerup. Statsaftalen (FM) er det største offentlige udbud indenfor kontormøbler ( millioner kr.) Kun 3 leverandører bliver valgt. Udover pris vægtes kvalitet, holdbarhed og miljø meget højt og alle møbler skal leve op til gældende krav og certificeringer, hvilket skal dokumenteres. Movements produkter på aftalen er alle produceret i Danmark, Norge, Tyskland eller Frankrig - ingen produkter er produceret i østen. Vandt udbud på udskiftning af hæve/sænke borde, over 3 år.

7 Referencer Mange projekter gennem de sidste 4-5 år. Som indkøber er det vigtigt for mig, at jeg kan agere fleksibelt i hverdagen, da dette sparer tid og penge. Her passer Movements STRAX koncept perfekt til mig, da vi kan få leveret møbler inden for 2-8 dage. Inger Margrethe Stubbegaard, Indkøber KMD. Vandt og udførte pilot projekt for den fremtidige indretning hos Nokia i Danmark. Total indretning af nyt domicil til 360 medarbejdere. Total indretning af domicil inklusiv køkken, café, AV-udstyr, solafskærmning etc. til 130 medarbejdere.

8 Plade sortiment Skriveborde Skriveborde + Mødeborde Mødeborde

9 Movement A/S Ellekær 12 DK-2730 Herlev Order no Page 1 of 1 Appendices 2 Initials laha/epn/hbs Test Report Material: Model: BETA II Type: Height adjustable work station Lab.no.: Length: 1750 mm Width: 850 mm Height: Max mm Min. 638 mm Materials: Table top: Laminate on MDF 23 mm Frame under tabletop: Bent metal profile 4 mm. Actuators: mm Feet: mm, metal Sampling: Method: The test material was sampled by the client and received at the Danish Technological Institute EN 527-2:2002 Office furniture. Work tables and desks. Mechanical safety requirements: Section 3. EN 527-3:2002 Office furniture, Office equipment, Furniture, Desks, Tables, Equipment safety: , , 5.2.2, 5.3.2, 5.4.2, 5.5.2, Period: The testing was carried out from to Result: Model BETA II fulfils the requirements of EN 527-2:2003. Individual results appear from Appendix 1. Storage: Terms: The test material will be destroyed after 1 month, unless otherwise agreed. The test has been performed according to the attached conditions, which are according to the guidelines laid down by DANAK (The Danish Accreditation). The testing is only valid for the tested specimen. The test report may only be extracted, if the laboratory has approved the extract , Danish Technological Institute, Wood and Textile, Taastrup Test responsible Co-reader \\dmwclus\dmw_docs\ \ _ BETA II.doc

10 Movement A/S Ellekær Herlev Order no Page 1 of 1 Appendices 2 Initials laha/epn/mipe Test Report Material: Model: Beta II, C Type: Height adjustable desk Lab.no.: C Length: 1600 mm Width: 800 mm Height max.: 1260 mm Height min.: Materials: 600 mm Table top: 22 mm MDF Metal frame. 3 mm Legs: 70 x 70 mm Feet : 750 x 80 mm Sampling: Method: The test material was sampled by the client and received at the Danish Technological Institute. DS/INF 69 Furniture Office tables Dimensional requirements. Clauses 3.1, 3.2.1, 3.3.1, 3.3.2, 3.4 and 3.5 Period: The testing was carried out week 39 Result: Model C fulfils the requirements of DS/INF 69 Individual results appear from Appendix 1. Storage: Terms: The test material will be destroyed after 1 month, unless otherwise agreed. The test has been performed according to the attached conditions, which are according to the guidelines laid down by DANAK (The Danish Accreditation). The testing is only valid for the tested specimen. The test report may only be extracted, if the laboratory has approved the extract , Danish Technological Institute, Wood and Textile, Taastrup Test responsible Co-reader \\dmwclus\dmw_docs\ \ _315952c DS INF 69.doc

11 Movement A/S Ellekær Herlev Order no D Page 1 of 1 Appendices 2 Initials laha/pfy/hbs Test Report Material: Model: Beta II B Type: Adjustable work station Lab.no.: D Length: 1750 mm Width: 850 mm Max height: 1250 mm Min. height: 600 mm Materials: Table top: 22 mm MDF Metal frame: 3 mm Actuators: mm Feet: mm Sampling: Method: The test material was sampled by the client and received at the Danish Technological Institut week 1, ISO 21016:2007 Office furniture Tables and desks Test methods for the determination of stability, strength and durability. Clause 6.6. Period: The testing was carried out from week 1 to week 37, Result: Model Beta II B fulfils the requirements of ISO 21016:2007. Individual results appear from Appendix 1. Storage: Terms: The test material will be destroyed after 1 month, unless otherwise agreed. The test has been performed according to the attached conditions, which are according to the guidelines laid down by DANAK (The Danish Accreditation). The testing is only valid for the tested specimen. The test report may only be extracted, if the laboratory has approved the extract , Danish Technological Institute, Wood and Textile, Taastrup Test responsible Co-reader \\dmwclus\dmw_docs\ \ _iso doc