Dansk standard DS/ISO 11075 1. udgave 2007-05-10 Fly Væske til afisning/antiisning ISO-type I Aircraft De-icing/anti-icing fluids ISO type I
DS/ISO 11075 København DS projekt: M214008 ICS: 49.100 Første del af denne publikations betegnelse er: DS/ISO, hvilket betyder, at det er en international standard, der har status som dansk standard Denne publikations overensstemmelse er: IDT med: ISO 11075:2007. DS-publikationen er på engelsk. DS-publikationstyper Dansk Standard udgiver forskellige publikationstyper. Typen på denne publikation fremgår af forsiden. Der kan være tale om: Dansk standard standard, der er udarbejdet på nationalt niveau, eller som er baseret på et andet lands nationale standard, eller standard, der er udarbejdet på internationalt og/eller europæisk niveau, og som har fået status som dansk standard DS-information publikation, der er udarbejdet på nationalt niveau, og som ikke har opnået status som standard, eller publikation, der er udarbejdet på internationalt og/eller europæisk niveau, og som ikke har fået status som standard, fx en teknisk rapport, eller europæisk præstandard DS-håndbog samling af standarder, eventuelt suppleret med informativt materiale DS-hæfte publikation med informativt materiale Til disse publikationstyper kan endvidere udgives tillæg og rettelsesblade DS-publikationsform Publikationstyperne udgives i forskellig form som henholdsvis fuldtekstpublikation (publikationen er trykt i sin helhed) godkendelsesblad (publikationen leveres i kopi med et trykt DS-omslag) elektronisk (publikationen leveres på et elektronisk medie) DS-betegnelse Alle DS-publikationers betegnelse begynder med DS efterfulgt af et eller flere præfikser og et nr., fx DS 383, DS/EN 5414 osv. Hvis der efter nr. er angivet et A eller Cor, betyder det, enten at det er et tillæg eller et rettelsesblad til hovedstandarden, eller at det er indført i hovedstandarden. DS-betegnelse angives på forsiden. Overensstemmelse med anden publikation: Overensstemmelse kan enten være IDT, EQV, NEQ eller MOD IDT: Når publikationen er identisk med en given publikation. EQV: Når publikationen teknisk er i overensstemmelse med en given publikation, men præsentationen er ændret. NEQ: Når publikationen teknisk eller præsentationsmæssigt ikke er i overensstemmelse med en given standard, men udarbejdet på baggrund af denne. MOD: Når publikationen er modificeret i forhold til en given publikation.
INTERNATIONAL STANDARD ISO 11075 Second edition 2007-04-15 Aircraft De-icing/anti-icing fluids ISO type I Aéronefs Liquides de dégivrage/d'antigivrage ISO type I Reference number ISO 11075:2007(E) ISO 2007
ISO 11075:2007(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO 2007 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyright@iso.org Web www.iso.org ii ISO 2007 All rights reserved
ISO 11075:2007(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 11075 was prepared by Technical Committee ISO/TC 20, Aircraft and space vehicles, Subcommittee SC 9, Air cargo and ground equipment. This second edition cancels and replaces the first edition (ISO 11075:1993), of which it constitutes a complete technical revision to endorse SAE AMS 1424, also supported by the Association of European Airlines (AEA). 1) 1) This data requires frequent updating. ISO TC 20/SC 9 has agreed to delegating this task under its own guidance to the Association of European Airlines (AEA) and the Society of Automotive Engineers (SAE), which are organizations recognized as experts in the field of de-icing/anti-icing aircraft on the ground. ISO 2007 All rights reserved iii
ISO 11075:2007(E) Introduction The aim of this International Standard is to standardize the critical characteristics of Newtonian or non Newtonian fluids designated ISO type I which are used for ground de-icing and anti-icing of airplanes, in order to ensure worldwide safety of civil transport airplanes under icing weather conditions. In order to reduce duplication of reference documents as much as possible and to benefit from easier industry-approved updating that takes into account the continuously evolving state of the art and knowledge, this International Standard constitutes a de facto recognition of the AMS 1424 standard, published by SAE on the basis of a permanent joint Committee with the Association of European Airlines (AEA) and with endorsement from the Civil Aviation Authorities concerned. iv ISO 2007 All rights reserved
INTERNATIONAL STANDARD ISO 11075:2007(E) Aircraft De-icing/anti-icing fluids ISO type I 1 Scope This International Standard defines the requirements for ISO type I fluids used in the removal and prevention of ice, snow, or frost on exterior surfaces of main line and regional civil transport airplanes on the ground. This International Standard is applicable to de-icing/anti-icing fluids for use on airplanes in general. However, the applicability may have limitations for particular airplane types. It is the airplane operator s responsibility to consult the aircraft operations manual, the aircraft maintenance manual and the service letters of the airplane manufacturer, to determine any limitations/restrictions relating to the use of de-icing/anti-icing fluids that conform to this International Standard for the type and model of airplane to be treated. See also ISO 11076. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 11076, Aircraft Ground-based de-icing/anti-icing methods with fluids AMS 1424, Deicing/Anti-icing Fluid, Aircraft, Type I 2) International Civil Aviation Organization (ICAO) Doc. 9640-AN/940, Manual of aircraft ground de-icing/antiicing operations 3) NOTE See also applicable national Civil Aviation regulations in the Bibliography. 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 main line airplane civil passenger and/or freight transport airplane with a maximum ramp mass over 50 000 kg (110 000 lb) 3.2 regional airplane civil passenger and/or freight transport airplane with a maximum ramp mass between 10 000 kg (22 000 lb) and 50 000 kg (110 000 lb) 2) AMS 1424 is published by and can be procured from: Society of Automotive Engineers (SAE), 400 Commonwealth Drive, Warrendale PA 15096-0001, U.S.A., or its web site at www.sae.org 3) Available in English, French, Russian, Spanish languages from ICAO (International Civil Aviation Organization), 999 University Street, Montreal, Quebec H4Z 1M1, Canada, or its web site at www.icao.int, or E-mail address sales_unit@icao.int ISO 2007 All rights reserved 1