Dansk standard DS/ISO 22763 1. udgave 2006-11-09 Jordbrug Marksprøjter Testbane for marksprøjter Equipment for crop protection Sprayers Demonstration track for field crop sprayers
DS/ISO 22763 København DS projekt: 56265 ICS: 65.060.40 Første del af denne publikations betegnelse er: DS/ISO, hvilket betyder, at det er en international standard, der har status som dansk standard Denne publikations overensstemmelse er: IDT med: ISO 22763:2006. DS-publikationen er på engelsk. DS-publikationstyper Dansk Standard udgiver forskellige publikationstyper. Typen på denne publikation fremgår af forsiden. Der kan være tale om: Dansk standard standard, der er udarbejdet på nationalt niveau, eller som er baseret på et andet lands nationale standard, eller standard, der er udarbejdet på internationalt og/eller europæisk niveau, og som har fået status som dansk standard DS-information publikation, der er udarbejdet på nationalt niveau, og som ikke har opnået status som standard, eller publikation, der er udarbejdet på internationalt og/eller europæisk niveau, og som ikke har fået status som standard, fx en teknisk rapport, eller europæisk præstandard DS-håndbog samling af standarder, eventuelt suppleret med informativt materiale DS-hæfte publikation med informativt materiale Til disse publikationstyper kan endvidere udgives tillæg og rettelsesblade DS-publikationsform Publikationstyperne udgives i forskellig form som henholdsvis fuldtekstpublikation (publikationen er trykt i sin helhed) godkendelsesblad (publikationen leveres i kopi med et trykt DS-omslag) elektronisk (publikationen leveres på et elektronisk medie) DS-betegnelse Alle DS-publikationers betegnelse begynder med DS efterfulgt af et eller flere præfikser og et nr., fx DS 383, DS/EN 5414 osv. Hvis der efter nr. er angivet et A eller Cor, betyder det, enten at det er et tillæg eller et rettelsesblad til hovedstandarden, eller at det er indført i hovedstandarden. DS-betegnelse angives på forsiden. Overensstemmelse med anden publikation: Overensstemmelse kan enten være IDT, EQV, NEQ eller MOD IDT: Når publikationen er identisk med en given publikation. EQV: Når publikationen teknisk er i overensstemmelse med en given publikation, men præsentationen er ændret. NEQ: Når publikationen teknisk eller præsentationsmæssigt ikke er i overensstemmelse med en given standard, men udarbejdet på baggrund af denne. MOD: Når publikationen er modificeret i forhold til en given publikation.
INTERNATIONAL STANDARD ISO 22763 First edition 2006-09-01 Equipment for crop protection Sprayers Demonstration track for field crop sprayers Matériel de protection des cultures Pulvérisateurs Piste de démonstration pour les pulvérisateurs Reference number ISO 22763:2006(E) ISO 2006
ISO 22763:2006(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO 2006 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyright@iso.org Web www.iso.org ii ISO 2006 All rights reserved
ISO 22763:2006(E) Contents Page Foreword... iv Introduction... v 1 Scope... 1 2 General... 1 3 Section A Field track... 2 4 Section B Headland turning track... 3 5 Section C Bumpy track... 4 5.1 Subsections... 4 5.2 Obstacle, test bumps and ramps... 5 5.2.1 Break-back test... 5 5.2.2 Furrow test... 6 Annex A (normative) Sequence of blocks and spaces over total length of field track... 7 ISO 2006 All rights reserved iii
ISO 22763:2006(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 22763 was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and forestry, Subcommittee SC 6, Equipment for crop protection. This first edition of ISO 22763 cancels and replaces ISO/TS 22763:2002, of which it constitutes a technical revision. iv ISO 2006 All rights reserved
ISO 22763:2006(E) Introduction The movement of the spray boom is an important performance criterion for field crop sprayers. During practical demonstrations, the sprayers are driven on demonstration tracks to give the visual impression of the boom movement. The tracks used are very different. This International Standard specifies a uniform track that can be used for practical demonstrations. As the intention is to show the boom movement visually, not to measure it, and due to the conditions under which practical demonstrations are normally performed, it gives the main characteristics but not all details required in, for example, laboratory measurements. This demonstration track includes three individual sections which respectively represent field conditions (Section A), defined by evaluating real, rough field surfaces, show the headland situation (Section B), including an extreme obstacle (simulating, for example, a potato dam), and include a combination of obstacles (Section C) to show boom movement under very rough conditions exceeding normal/real conditions. Section A, simulating field conditions, is based on detailed research. It has been proven that this track represents field conditions and excites a wider range of signals than previous demonstration tracks. ISO 2006 All rights reserved v
INTERNATIONAL STANDARD ISO 22763:2006(E) Equipment for crop protection Sprayers Demonstration track for field crop sprayers 1 Scope This International Standard specifies a uniform demonstration track for showing the spray boom movement of field crop sprayers in, for example, practical demonstrations. The track specified can be used in demonstrations for mounted, trailed or self-propelled sprayers. 2 General 2.1 The demonstration track may consist of the following sections (see Figure 1): Section A, field track; Section B, headland turning track; Section C, bumpy track. While Sections B and/or C are optional, the demonstration track shall include Section A. 2.2 National and local regulatory conditions and health and safety requirements for visitors and operators should be observed and followed. Key A field track a Start/driving direction. B headland turning track b Acceleration zone. C bumpy track r radius Figure 1 Demonstration track (Sections A, B and C) Top view ISO 2006 All rights reserved 1