Højspændingskoblingsudstyr Del 307: Vejledning for udvidelse af gyldigheden af typeprøvninger af ACkoblingsudstyr
|
|
- Pernille Berg
- 5 år siden
- Visninger:
Transkript
1 DS-information DS/IEC TR : udgave Højspændingskoblingsudstyr Del 307: Vejledning for udvidelse af gyldigheden af typeprøvninger af ACkoblingsudstyr i metalkapslinger og kapslinger af fast isolering til nominelle spændinger over 1 kv til og med 52 kv High-voltage switchgear and controlgear Part 307: Guidance for the extension of validity of type tests of AC metal and solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kv and up to and including 52 kv
2 DS/IEC TR :2015 København DS projekt: M ICS: Første del af denne publikations betegnelse er: DS/IEC TR, hvilket betyder, at det er en international teknisk rapport, der har status som DS-information. Denne publikations overensstemmelse er: IDT med: IEC TR :2015. DS-publikationen er på engelsk. DS-publikationstyper Dansk Standard udgiver forskellige publikationstyper. Typen på denne publikation fremgår af forsiden. Der kan være tale om: Dansk standard standard, der er udarbejdet på nationalt niveau, eller som er baseret på et andet lands nationale standard, eller standard, der er udarbejdet på internationalt og/eller europæisk niveau, og som har fået status som dansk standard DS-information publikation, der er udarbejdet på nationalt niveau, og som ikke har opnået status som standard, eller publikation, der er udarbejdet på internationalt og/eller europæisk niveau, og som ikke har fået status som standard, fx en teknisk rapport, eller europæisk præstandard DS-håndbog samling af standarder, eventuelt suppleret med informativt materiale DS-hæfte publikation med informativt materiale Til disse publikationstyper kan endvidere udgives tillæg og rettelsesblade DS-publikationsform Publikationstyperne udgives i forskellig form som henholdsvis fuldtekstpublikation (publikationen er trykt i sin helhed) godkendelsesblad (publikationen leveres i kopi med et trykt DS-omslag) elektronisk (publikationen leveres på et elektronisk medie) DS-betegnelse Alle DS-publikationers betegnelse begynder med DS efterfulgt af et eller flere præfikser og et nr., fx DS 383, DS/EN 5414 osv. Hvis der efter nr. er angivet et A eller Cor, betyder det, enten at det er et tillæg eller et rettelsesblad til hovedstandarden, eller at det er indført i hovedstandarden. DS-betegnelse angives på forsiden. Overensstemmelse med anden publikation: Overensstemmelse kan enten være IDT, EQV, NEQ eller MOD IDT: Når publikationen er identisk med en given publikation. EQV: Når publikationen teknisk er i overensstemmelse med en given publikation, men præsentationen er ændret. NEQ: Når publikationen teknisk eller præsentationsmæssigt ikke er i overensstemmelse med en given standard, men udarbejdet på baggrund af denne. MOD: Når publikationen er modificeret i forhold til en given publikation.
3 TECHNICAL REPORT RAPPORT TECHNIQUE IEC TR Edition colour inside High-voltage switchgear and controlgear Part 307: Guidance for the extension of validity of type tests of AC metal and solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kv and up to and including 52 kv Appareillage à haute tension Partie 307: Lignes directrices pour l'extension de validité des essais de type d'appareillages en courant alternatif sous enveloppe métallique et d isolation solide pour tensions assignées supérieures à 1 kv et jusqu'à 52 kv inclus IEC TR : (en-fr)
4 2 IEC TR :2015 IEC 2015 CONTENTS FOREWORD General Scope Normative references Terms and definitions Use of extension criteria General Parameters for extension criteria Use of calculations General Temperature rise calculations Electric field calculations Mechanical stress calculations Short-circuit current calculations Internal arc pressure rise calculations Information needed for extension of type test validity Application of extension criteria Dielectric tests Temperature rise tests Mechanical tests Short-time and peak withstand current tests Making and breaking tests Internal arc fault tests General Extension criteria with respect to design Extension criteria with respect to ratings and installation conditions Extending the validity of type tests General Extension of validity of a test report to other functional units (situation a) Validation of a family by selection of test objects (situation b) General Mapping of the family Specification of test objects Validation of an assembly by existing test reports (situation c) Validation of a design modification (situation d) Annex A (informative) Rationale for the extension criteria A.1 General A.2 Dielectric tests A.2.1 General A.2.2 Clearances (Items 1 and 2) A.2.3 Insulating supports and material (Items 3 and 4) A.2.4 Live parts (Items 5 and 6) A.2.5 Open contact gap and isolating distance (Items 7 and 8) A.2.6 Minimum functional pressure for insulation (Item 9) A.3 Temperature rise tests A.3.1 General... 25
5 IEC TR :2015 IEC A.3.2 Centre distance between phase conductors (Item 1) A.3.3 Phase to earth distance (Item 2) A.3.4 Enclosure and compartment volume (Item 3) A.3.5 Insulating gas (Item 4) A.3.6 Conductors (Items 5 and 6) A.3.7 Conductor joints and connections (Items 7, 8 and 9) A.3.8 Ventilation area of partitions and enclosure (Item 10) A.3.9 Power dissipation of components (Item 11) A.3.10 Insulating barriers (Item 12) A.3.11 Insulating coating of conductors and enclosures (Item 13 and 14) A.3.12 Insulating material in contact with conductors (Item 15) A.4 Mechanical tests A.4.1 General A.4.2 Shutter systems (Item 1) A.4.3 Contacts of removable parts (Item 2) A.4.4 Interlocking systems (Items 3 and 4) A.5 Short-time and peak withstand current tests A.5.1 General A.5.2 Centre distance between phase conductors (Item 1) A.5.3 Conductors (Items 2, 5 and 6) A.5.4 Insulating conductor supports (Items 3 and 4) A.5.5 Insulating material in contact with conductors (Item 7) A.5.6 Enclosure, partitions or bushings (Item 8) A.5.7 Contacts of removable part (Item 9) A.6 Making and breaking tests A.6.1 General A.6.2 Clearance between phases and to earth (Items 1 and 2) A.6.3 Enclosure and compartment volume (Item 3) A.6.4 Insulating gas (Item 4) A.6.5 Conductors (Items 5 and 6) A.6.6 Insulating supports (Items 7, 8 and 9) A.7 Internal arc fault tests A.7.1 General A.7.2 Clearance between phases and to earth (Items 1 and 2) A.7.3 Compartment volume (Item 3) A.7.4 Pressure of insulating gas (Item 4) A.7.5 Material in the region of arc initiation (Items 5, 6, 7 and 8) A.7.6 Pressure relief opening devices (Items 9, 10 and 11) A.7.7 Enclosure and compartments (Items 12, 13, 14 and 15) A.8 Rationale for extension criteria with respect to arc fault ratings and installation conditions A.8.1 General A.8.2 Rated arc fault current and duration (items 1 and 2) A.8.3 Rated voltage (item 3) A.8.4 Rated frequency (item 4) A.8.5 Arrangement of assembly (items 5, 6 and 7) A.8.6 Indoor or outdoor installation (item 8) A.8.7 Type of accessibility (item 9) A.8.8 Accessible sides (item 10)... 37
6 4 IEC TR :2015 IEC 2015 Annex B (informative) Examples for the extension of validity of type tests B.1 General B.2 Design modification of a cable terminal in air insulated switchgear (AIS) B.3 Design modification of an AIS bus riser functional unit by adding current transformers B.4 Design modification of a key-lock in the door of a functional unit of AIS B.5 Extension of a ring-main unit (GIS) to functional units with larger width B.6 Extension of a family of gas insulated switchgear (GIS) by a functional unit Bibliography Figure 1 Extension of validity of one test report; situation a) Figure 2 Validation of a family by selection of appropriate test objects; situation b) Figure 3 Validation of actual assembly with existing test reports; situation c) Figure B.1 Cable terminals in the connection compartment of air insulated switchgear Figure B.2 Addition of block-type current transformers into the bus riser functional unit of air insulated switchgear Figure B.3 Special type of key-lock as replacement for a standard key-lock in the door of air insulated switchgear Figure B.4 Front view and top cross sectional view of a combination of functional units making up a ring-main unit Figure B.5 Cross-section of two different functional units of GIS Table 1 Examples of design parameters Table 2 Extension criteria for dielectric withstand performance Table 3 Extension criteria for temperature rise performance Table 4 Extension criteria for mechanical performance Table 5 Extension criteria for short-time and peak withstand current performance Table 6 Extension criteria for making and breaking capacity Table 7 Extension criteria for internal arc fault withstand performance Table 8 Extension criteria for internal arc fault classification with respect to installation conditions Table B.1 Affirmation of extension criteria with respect to dielectric withstand performance of a functional unit Table B.2 Affirmation of extension criteria with respect to short-time current withstand performance of a functional unit Table B.3 Affirmation of extension criteria with respect to temperature rise performance of a ring-main-unit Table B.4 Affirmation of extension criteria with respect to internal arc classification of a GIS circuit-breaker compartment... 44
7 IEC TR :2015 IEC INTERNATIONAL ELECTROTECHNICAL COMMISSION HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR Part 307: Guidance for the extension of validity of type tests of AC metal and solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kv and up to and including 52 kv FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as IEC Publication(s) ). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and nongovernmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. The main task of IEC technical committees is to prepare International Standards. However, a technical committee may propose the publication of a technical report when it has collected data of a different kind from that which is normally published as an International Standard, for example "state of the art". IEC TR , which is a technical report, has been prepared by subcommittee 17C: Assemblies, of IEC technical committee 17: High-voltage switchgear and controlgear. This Technical Report is to be read in conjunction with IEC published in 2011 and IEC published in 2014.
8 6 IEC TR :2015 IEC 2015 The text of this Technical Report is based on the following documents: Enquiry draft 17C/625/DTR Report on voting 17C/632/RVC Full information on the voting for the approval of this Technical Report can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC series, published under the general title High-voltage switchgear and controlgear, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under " in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The 'colour inside' logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer.
9 IEC TR :2015 IEC HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR Part 307: Guidance for the extension of validity of type tests of AC metal and solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kv and up to and including 52 kv 1 General 1.1 Scope This Part of IEC 62271, which is a Technical Report, refers to prefabricated metal-enclosed and solid-insulation enclosed (both hereinafter called enclosed) switchgear and controlgear assemblies for alternating current of rated voltages above 1 kv and up to and including 52 kv as specified in IEC and IEC , and to other equipment included in the same enclosure with any possible mutual influence. This Technical Report may be used for the extension of the validity of type tests performed on one test object with a defined set of ratings to another switchgear assembly of the same family with a different set of ratings or different arrangements of components. It supports the selection of representative test objects composed of functional units of a family of switchgear and controlgear aimed at the optimization of type tests in order to perform a consistent conformity assessment. This Technical Report utilises a combination of sound technical and physical principles, manufacturer and user experience and calculations to establish guidance for the extension of validity of type tests, covering various design and rating aspects. 1.2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC :1984, International Electrotechnical Vocabulary. Switchgear, controlgear and fuses IEC :1984/AMD1:2000 IEC :2007, High-voltage switchgear and controlgear Part 1: Common specifications IEC :2007/AMD1:2011 IEC :2011, High-voltage switchgear and controlgear Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kv and up to and including 52 kv IEC :2014, High-voltage switchgear and controlgear Part 201: AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kv and up to and including 52 kv 2 Terms and definitions For the purposes of this document, the terms and definitions given in IEC , IEC , IEC , IEC , as well as the following apply. NOTE Some standard terms and definitions are recalled here for ease of reference.
Dansk Standard DS/EN 61595-3 1. udgave. COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN 61595-3:2001
Dansk Standard DS/EN 61595-3 1. udgave Godkendt:2001-05-18 Digitalt lydbåndoptagersystem med flere kanaler (DATR), spoletil-spolesystem, til professionelt brug Del 3: 24-bits funktion til 16-bits medier
Læs mereVejledning i udarbejdelse og brug af undervisningsmateriale til elektromedicinsk
DS-information DS/IEC/TR 61258 1. udgave 2008-09-19 Vejledning i udarbejdelse og brug af undervisningsmateriale til elektromedicinsk udstyr Guidelines for the development and use of medical electrical
Læs mereInformationsmodel der dækker indhold af IEC og -2, IEC 61175, IEC og IEC
DS-information DS/IEC/TS 62771 1. udgave 2012-10-10 Informationsmodel der dækker indhold af IEC 81346-1 og -2, IEC 61175, IEC 61666 og IEC 81714-3 Information model covering the contents of IEC 81346-1
Læs mereKoaksiale kommunikationskabler Del 1-116: Elektriske prøvningsmetoder Impedansprøvning ved hjælp af TDR (tidsdomænereflektometri)
Dansk standard Standard$ $ DS/IEC 61196-1-116:2015 1. udgave 2015-12-02 Koaksiale kommunikationskabler Del 1-116: Elektriske prøvningsmetoder Impedansprøvning ved hjælp af TDR (tidsdomænereflektometri)
Læs mereFlerlederkabler og symmetriske par/fir-snoede kabler til digital kommunikation Del 7-1: Symmetriske parsnoede kabler med transmissionskarakteristikker
Dansk standard DS/IEC 61156-7-1 1. udgave 2003-07-04 Flerlederkabler og symmetriske par/fir-snoede kabler til digital kommunikation Del 7-1: Symmetriske parsnoede kabler med transmissionskarakteristikker
Læs mereAlmindelig belysning LED og LED-moduler Termer og definitioner
DS-information DS/IEC/TS 62504 1. udgave 2011-05-30 Almindelig belysning LED og LED-moduler Termer og definitioner General lighting LEDs and LED modules Terms and definitions DS/IEC/TS 62504 København
Læs mereElektriske apparater til husholdningsbrug o.l. Sikkerhed Del 1: Generelle krav
Dansk standard Tillæg DS/IEC 60335-1/A1:2013 + Corr 1:2014 1. udgave 2014-05-08 Elektriske apparater til husholdningsbrug o.l. Sikkerhed Del 1: Generelle krav Household and similar electrical appliances
Læs mereAlarmer og elektroniske sikkerhedssystemer Tryghedsalarmsystemer Del 5: Sammenkobling og kommunikation
Dansk standard DS/IEC 62851-5 1. udgave 2014-06-19 Alarmer og elektroniske sikkerhedssystemer Tryghedsalarmsystemer Del 5: Sammenkobling og kommunikation Alarm and electronic security systems Social alarm
Læs mereBegrebsmodel til standardisering af multimediesystemer og -udstyr til bilen
DS-information DS/IEC TR 63038:2016 1. udgave 2016-08-01 Begrebsmodel til standardisering af multimediesystemer og -udstyr til bilen Conceptual model of standardization for multimedia car systems and equipment
Læs mereTeknisk tegning Almene tegneregler Del 50: Grundlæggende regler for angivelse af områder på snitafbildninger og snit
Dansk Standard DS/ISO 128-50 1. udgave 2002-05-21 Teknisk tegning Almene tegneregler Del 50: Grundlæggende regler for angivelse af områder på snitafbildninger og snit Technical drawings General principles
Læs mereKrafttransformere Del 19: Regler for bestemmelse af usikkerheder i måling af tab i krafttransformere og reaktorer
DS-information DS/IEC/TS 60076-19 1. udgave 2013-06-10 Krafttransformere Del 19: Regler for bestemmelse af usikkerheder i måling af tab i krafttransformere og reaktorer Power transformers Part 19: Rules
Læs mereMaskinsikkerhed Risikovurdering Del 2: Praktisk vejledning og metodeeksempler
DS-information DS/ISO/TR 14121-2 2. udgave 2012-07-04 Maskinsikkerhed Risikovurdering Del 2: Praktisk vejledning og metodeeksempler Safety of machinery Risk assessment Part 2: Practical guidance and examples
Læs mereTeknisk tegning Almene tegneregler Del 40: Grundlæggende regler for snitafbildninger og snit
Dansk Standard DS/ISO 128-40 1. udgave 2002-05-21 Teknisk tegning Almene tegneregler Del 40: Grundlæggende regler for snitafbildninger og snit Technical drawings General principles of presentation Part
Læs mereNuklearmedicinsk instrumentering Rutineprøvninger Del 1: Tællesystemer
DS-information DS/IEC TR 61948-1:2016 2. udgave 2016-04-15 Nuklearmedicinsk instrumentering Rutineprøvninger Del 1: Tællesystemer til gammastråling Nuclear medicine instrumentation Routine tests Part 1:
Læs mereProfessionelle videoprodukter Filmløst videokamera til MXF-filformat Retningslinjer for indkodning Del 1: MXF Operational Patterns
DS-information DS/IEC TS 62871-1:2015 1. udgave 2016-01-07 Professionelle videoprodukter Filmløst videokamera til MXF-filformat Retningslinjer for indkodning Del 1: MXF Operational Patterns Professional
Læs mereStikpropper og stikkontakter til husholdningbrug o.l. Del 2-7: Særlige krav til forlængerledninger
Dansk standard Tillæg DS/IEC 60884-2-7/Amd. 1 1. udgave 2013-07-01 Stikpropper og stikkontakter til husholdningbrug o.l. Del 2-7: Særlige krav til forlængerledninger Plugs and socket-outlets for household
Læs mereElektronisk arkivering Del 1: Specifikationer vedrørende udvikling og drift af et informationssystem til sikring af elektroniske dokumenter
Dansk standard DS/ISO 14641-1 1. udgave 2012-02-29 Elektronisk arkivering Del 1: Specifikationer vedrørende udvikling og drift af et informationssystem til sikring af elektroniske dokumenter Electronic
Læs mereJordbrug Traktorer Bagmonteret trepunktsophæng Kategori 1N, 1, 2N, 2, 3N, 3, 4N og 4
Dansk standard Tillæg DS/ISO 730/Amd 1 1. udgave 2014-08-05 Jordbrug Traktorer Bagmonteret trepunktsophæng Kategori 1N, 1, 2N, 2, 3N, 3, 4N og 4 Agricultural wheeled tractors Rear-mounted threepoint linkage
Læs mereKirurgiske implantater Knogleplader af metal Huller, der passer til skruer med asymmetrisk gevind og sfærisk underside
Dansk standard DS/ISO 5836 1. udgave 2014-10-10 Kirurgiske implantater Knogleplader af metal Huller, der passer til skruer med asymmetrisk gevind og sfærisk underside Implants for surgery Metal bone plates
Læs mereTekniske specifikationer for centrifugalpumper Klasse III
Dansk standard Tillæg DS/EN ISO 9908/A1 1. udgave 2011-06-08 Tekniske specifikationer for centrifugalpumper Klasse III Technical specifications for centrifugal pumps Class III Amendment 1 DS/EN ISO 9908/A1
Læs mereCentrale strømforsyningssystemer
Dansk Standard DS/EN 50171 1. udgave 2001-08-29 Centrale strømforsyningssystemer Central power supply systems DS/EN 50171 København DS projekt: 30769 ICS: 29.200 Deskriptorer: belysning til nødudgang,elektriske
Læs mereDansk standard DS/EN ISO udgave Campingtelte. Camping tents
Dansk standard DS/EN ISO 5912 2. udgave 2011-11-22 Campingtelte Camping tents DS/EN ISO 5912 København DS projekt: M245636 ICS: 97.200.30 Første del af denne publikations betegnelse er: DS/EN ISO, hvilket
Læs mereElektriske kabler til fotovoltaiske systemer med en mærkespænding på 1,5 kv d.c.
Dansk standard 2017-12-19 Elektriske kabler til fotovoltaiske systemer med en mærkespænding på 1,5 kv d.c. Electric cables for photovoltaic systems with a voltage rating of 1,5 kv DC DANSK STANDARD Danish
Læs merePrøvning af brandrisiko Del 4: Terminologi vedrørende brandprøvning af elektrotekniske produkter
Dansk standard DS/EN 60695-4 3. udgave 2012-09-17 Prøvning af brandrisiko Del 4: Terminologi vedrørende brandprøvning af elektrotekniske produkter Fire hazard testing Part 4: Terminology concerning fire
Læs mereElektronisk jernbaneudstyr Togkommunikationsnetværk (TCN) Del 2-7: Trådløs Train Backbone (WLTB)
DS-information DS/IEC TR 61375-2-7 1. udgave 2014-06-18 Elektronisk jernbaneudstyr Togkommunikationsnetværk (TCN) Del 2-7: Trådløs Train Backbone (WLTB) Electronic railway equipment Train communication
Læs mereIsolerede ledere i et kabel Data for AWG og kcmil-størrelser
DS-information DS/IEC/TR 62602 1. udgave 2010-01-18 Isolerede ledere i et kabel Data for AWG og kcmil-størrelser Conductors of insulated cables Data for AWG and KCMIL sizes DS/IEC/TR 62602 København DS
Læs mereTeknisk tegning Almene tegneregler Del 25: Linjer på skibsbygningstegninger
Dansk Standard DS/ISO 128-25 1. udgave 2001-12-06 Teknisk tegning Almene tegneregler Del 25: Linjer på skibsbygningstegninger Technical drawings General principles of presentation Part 25: Lines on shipbuilding
Læs mereForetrukne diametre for trådafslutninger på kondensatorer og modstande
Dansk standard DS/EN 60301 1. udgave 2012-11-12 Foretrukne diametre for trådafslutninger på kondensatorer og modstande Preferred diameters of wire terminations of capacitors and resistors DS/EN 60301 København
Læs mereMobile og faste offshoreenheder Elektriske installationer Del 1: Generelle krav og betingelser
Dansk standard DS/IEC 61892-1:2015 2. udgave 2015-09-10 Mobile og faste offshoreenheder Elektriske installationer Del 1: Generelle krav og betingelser Mobile and fixed offshore units Electrical installations
Læs mereBelysningsarmaturer Del 2-11: Særlige bestemmelser Akvariebelysning
Dansk standard DS/EN 60598-2-11 1. udgave 2005-08-17 Belysningsarmaturer Del 2-11: Særlige bestemmelser Akvariebelysning Luminaires Part 2-11: Particular requirements DS/EN 60598-2-11 København DS projekt:
Læs mereCommissioning of electrical, instrumentation and control systems in the process industry Specific phases and milestones
Dansk standard DS/EN 62337 1. udgave 2007-05-21 Idriftsættelse af elektriske instrumenterings- og styringssystemer i procesindustrien Specifikke faser og milepæle Commissioning of electrical, instrumentation
Læs mereCOPYRIGHT Danish Standards Foundation. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/IEC/TR 62780:2012
DS-information DS/IEC/TR 62780 1. udgave 2012-09-28 Multimediesystemer og -udstyr E-udgivelse og e-bøger til multimediebrug Vejledning for beskyttelse mod mekanisk belastning under distribution af e-bøger
Læs mereUdstyr til lysbuesvejsning Del 3: Lysbuetænding og stabiliserende enheder
Dansk standard DS/EN 60974-3 3. udgave 2014-02-27 Udstyr til lysbuesvejsning Del 3: Lysbuetænding og stabiliserende enheder Arc welding equipment Part 3: Arc striking and stabilizing devices DS/EN 60974-3
Læs mereTeknisk produktdokumentation Dokumenttyper
Dansk standard DS/ISO 29845 1. udgave 2011-09-30 Teknisk produktdokumentation Dokumenttyper Technical product documentation Document types DS/ISO 29845 København DS projekt: M245068 ICS: 01.110 Første
Læs mereElektriske kabler Halogenfri termoplastisolerede kabler med lav røgudvikling og nominel spænding til og med 450/750 V Del 1: Generelle krav
Dansk standard DS/IEC 62821-1:2015 1. udgave 2015-02-19 Elektriske kabler Halogenfri termoplastisolerede kabler med lav røgudvikling og nominel spænding til og med 450/750 V Del 1: Generelle krav Electric
Læs mereBogstavsymboler til brug i elektroteknologi
Dansk standard DS/EN 600277 1. udgave 20100929 Bogstavsymboler til brug i elektroteknologi Del 7: Elgenerering, transmission og distribution Letter symbols to be used in electrical technology Part 7: Power
Læs mereTeknisk tegning Flowdiagrammer til procesanlæg Generelle regler
Dansk Standard DS/EN ISO 10628 1. udgave Godkendelsesblad Godkendt:2001-04-06 Teknisk tegning Flowdiagrammer til procesanlæg Generelle regler Flow diagrams for process plants General rules DANSK STANDARD
Læs mereMaintenance Documentation for maintenance
Dansk standard DS/EN 13460 3. udgave 2009-12-15 Vedligehold Dokumentation for vedligehold Maintenance Documentation for maintenance DS/EN 13460 København DS projekt: M245239 ICS: 01.110; 21.020 Første
Læs mereMaskinsikkerhed Elektrisk udstyr på maskiner Del 1: Generelle krav
Dansk standard Rettelsesblad DS/EN 60204-1/Corr. 1. udgave 2010-08-16 Maskinsikkerhed Elektrisk udstyr på maskiner Del 1: Generelle krav Safety of machinery Electrical equipment of machines Part 1: General
Læs mereSolcelleanlæg Termer, definitioner og symboler
DS-information DS/CLC/TS 61836 1. udgave 2009-06-26 Solcelleanlæg Termer, definitioner og symboler Solar photovoltaic energy systems Terms, definitions and symbols DS/CLC/TS 61836 København DS projekt:
Læs mereBeskyttelsesbeklædning til beskyttelse mod kemikalier Klassificering, mærkning og krav til ydeevne
Dansk standard Tillæg DS/ISO 16602/A1 1. udgave 2012-11-15 Beskyttelsesbeklædning til beskyttelse mod kemikalier Klassificering, mærkning og krav til ydeevne Protective clothing for protection against
Læs mereBatchstyring Del 1: Modeller og terminologi
Dansk Standard DS/EN 61512-1 1. udgave 2001-08-29 Batchstyring Del 1: Modeller og terminologi Batch control Part 1: Models and terminology DS/EN 61512-1 København DS projekt: 26009 ICS: 25.040.40 Deskriptorer:
Læs mereAnvendelse af IEC til vurdering af blåt lys i lyskilder og belysningsarmaturer
DS-information DS/IEC/TR 62778 1. udgave 2012-09-24 Anvendelse af IEC 62471 til vurdering af blåt lys i lyskilder og belysningsarmaturer Application of IEC 62471 for the assessment of blue light hazard
Læs mereJernbaner Faste installationer Banetransformere
Dansk standard DS/IEC 62695 1. udgave 2014-08-01 Jernbaner Faste installationer Banetransformere Railway applications Fixed installations Traction transformers DS/IEC 62695 København DS projekt: M273297
Læs mereHøjspændingskoblingsudstyr Del 102: Højspændingsadskillere og jordsluttere til vekselstrøm
Dansk standard Tillæg DS/EN 62271-102/A2 1. udgave 2013-06-07 Højspændingskoblingsudstyr Del 102: Højspændingsadskillere og jordsluttere til vekselstrøm High-voltage switchgear and controlgear Part 102:
Læs merePapir og karton Bestemmelse af tykkelse, densitet og massevolumen
Dansk standard DS/EN ISO 534 1. udgave 2012-01-04 Papir og karton Bestemmelse af tykkelse, densitet og massevolumen Paper and board Determination of thickness, density and specific volume DS/EN ISO 534
Læs mereVejledning i anvendelse af ISO og IEC ved design af sikkerhedsrelaterede styresystemer til maskiner
DS-information DS/CLC/TR 62061-1 1. udgave 2010-08-26 Vejledning i anvendelse af ISO 13849-1 og IEC 62061 ved design af sikkerhedsrelaterede styresystemer til maskiner Guidance on the application of ISO
Læs mereInformationsteknologi Sikkerhedsteknikker Vejledning i auditering af informationssikkerhedskontroller
DS-information DS/ISO/IEC TR 27008 1. udgave 2011-10-28 Informationsteknologi Sikkerhedsteknikker Vejledning i auditering af informationssikkerhedskontroller Information technology Security techniques
Læs mereAutomation systems in the process industry Factory acceptance test (FAT), site acceptance test (SAT) and site integration test (SIT)
Dansk standard DS/EN 62381 1. udgave 2007-04-27 Automationssystemer i procesindustrien Fabriksleveringsprøvning (FAT), leveringsprøvning på montagestedet (SAT) og integrationsprøvning på montagestedet
Læs mereRulningslejer Tryklejer Grænsedimensioner,
Dansk standard DS/ISO 104:2015 1. udgave 2015-12-16 Rulningslejer Tryklejer Grænsedimensioner, overordnet plan Rolling bearings Thrust bearings Boundary dimensions, general plan DS/ISO 104:2015 København
Læs mereInformationsteknologi Sikkerhedsteknikker Applikationssikkerhed Del 1: Oversigt og begreber
Dansk standard Rettelsesblad DS/ISO/IEC 27034-1/Cor 1 1. udgave 2014-01-30 Informationsteknologi Sikkerhedsteknikker Applikationssikkerhed Del 1: Oversigt og begreber Information technology Security techniques
Læs mereJordbrug Traktorer Bagmonteret trepunktsophæng Kategori 1N, 1, 2N, 2, 3N, 3, 4N og 4
Dansk standard DS/ISO 730 1. udgave 2009-02-10 Jordbrug Traktorer Bagmonteret trepunktsophæng Kategori 1N, 1, 2N, 2, 3N, 3, 4N og 4 Agricultural wheeled tractors Rear-mounted three-point linkage Categories
Læs mereKosmetik Metoder til prøvning af solbeskyttelse In vivo-bestemmelse af UVA-beskyttelse
Dansk standard DS/EN ISO 24442 1. udgave 2012-02-01 Kosmetik Metoder til prøvning af solbeskyttelse In vivo-bestemmelse af UVA-beskyttelse Cosmetics Sun protection test methods In vivo determination of
Læs mereDansk standard DS/IEC
Dansk standard DS/IEC 62128-3 1. udgave 2013-10-17 Jernbaner Faste installationer Elektrisk sikkerhed, jording og returledning Del 3: Gensidig interaktion mellem jævnstrøms- og vekselstrømstraktionssystemer
Læs mereInformationsteknologi Sikkerhedsteknikker. Del 2: Vejledning i design og implementering af netværkssikkerhed
Dansk standard DS/ISO/IEC 27033-2 1. udgave 2012-09-11 Informationsteknologi Sikkerhedsteknikker Netværkssikkerhed Del 2: Vejledning i design og implementering af netværkssikkerhed Information technology
Læs mereFritidsdykkerservice Krav til snorkel/dykkerledelse
Dansk standard DS/ISO 13289 1. udgave 2012-02-03 Fritidsdykkerservice Krav til snorkel/dykkerledelse Recreational diving services Requirements for the conduct of snorkelling excursions DS/ISO 13289 København
Læs mereFoderstoffer. Bestemmelse af fedtindhold
Dansk Standard DS/ISO 6492 1. udgave Godkendt:1999-09-13 Foderstoffer. Bestemmelse af fedtindhold Animal feeding stuffs - Determination of fat content DANSK STANDARD - Eftertryk uden tilladelse forbudt
Læs mereInformationsteknologi Små computersystemers. Del 326: Reducerede blokkommandoer (RBC)
Dansk standard DS/ISO/IEC 14776-326:2015 1. udgave 2015-11-19 Informationsteknologi Små computersystemers grænseflader (SCSI) Del 326: Reducerede blokkommandoer (RBC) Information technology Small Computer
Læs mereMaterialedeklaration af produkter i og til den elektrotekniske industri
Dansk standard DS/EN 62474 1. udgave 2012-09-05 Materialedeklaration af produkter i og til den elektrotekniske industri Material declaration for products of and for the electrotechnical industry DS/EN
Læs merePulvermaling Del 7: Bestemmelse af massetab efter ophedning i ovn
Dansk standard DS/EN ISO 8130-7 1. udgave 2011-01-21 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 8130-7:2011 Pulvermaling Del 7: Bestemmelse af massetab efter ophedning
Læs mereInformationsteknologi. Brugersystemets grænseflader og symboler. Ikonsymboler og funktioner. Del 6: Aktionsikoner
Dansk Standard DS/ISO/IEC 11581-6 Godkendelsesblad 1. udgave Godkendt:1999-12-07 Informationsteknologi. Brugersystemets grænseflader og symboler. Ikonsymboler og funktioner. Del 6: Aktionsikoner Information
Læs mereTrykluft Del 3: Prøvningsmetoder til måling af fugtighed
Dansk Standard DS/ISO 8573-3 1. udgave Godkendt:2001-03-01 Trykluft Del 3: Prøvningsmetoder til måling af fugtighed Compressed air Part 3: Test methods for measurement of humidity DANSK STANDARD - Eftertryk
Læs mereMiljøprøvninger Del 3-1: Underbyggende dokumentation og vejledning Prøvninger med kulde og tør varme
Dansk standard DS/EN 60068-3-1 2. udgave 2012-01-05 Miljøprøvninger Del 3-1: Underbyggende dokumentation og vejledning Prøvninger med kulde og tør varme Environmental testing Part 3-1: Supporting documentation
Læs mereOptik og optiske instrumenter Medicinske endoskoper og endoskopitilbehør Del 3: Bestemmelse af synsfelt og synsretning for endoskoper med optik
Dansk standard DS/ISO 8600-3:1997 1. udgave 2015-10-15 Optik og optiske instrumenter Medicinske endoskoper og endoskopitilbehør Del 3: Bestemmelse af synsfelt og synsretning for endoskoper med optik Optics
Læs mereBestemmelser for mærkning af elektrisk udstyr med angivelse af forsyningsspænding Sikkerhedsbestemmelser
Dansk standard DS/EN 61293:1994 1. udgave Bestemmelser for mærkning af elektrisk udstyr med angivelse af forsyningsspænding Sikkerhedsbestemmelser Marking of electrical equipment with ratings related to
Læs mereDansk standard DS/EN Risk management Risk assessment techniques. 1. udgave
Dansk standard DS/EN 31010 1. udgave 2010-05-20 Risikoledelse Teknikker til risikovurdering Risk management Risk assessment techniques DS/EN 31010 København DS projekt: M231261 ICS: 03.100.01 Første del
Læs mereLED-binning Del 1: Generelle krav og white colour grid
Dansk standard DS/EN 62707-1 1. udgave 2014-03-19 LED-binning Del 1: Generelle krav og white colour grid LED-binning Part 1: General requirements and white colour grid DS/EN 62707-1 København DS projekt:
Læs mereOverensstemmelsesvurdering Krav og anbefalinger til indholdet af en tredjeparts auditrapport om ledelsessystemer
DS-information DS/ISO/IEC TS 17022 1. udgave 2012-04-17 Overensstemmelsesvurdering Krav og anbefalinger til indholdet af en tredjeparts auditrapport om ledelsessystemer Conformity assessment Requirements
Læs mereInformationsteknologi Vejledning i anvendelse af ISO 9001:2008 til ITserviceledelse
DS-information DS/ISO/IEC TR 90006 1. udgave 2013-11-28 Informationsteknologi Vejledning i anvendelse af ISO 9001:2008 til ITserviceledelse og integreringen med ISO/IEC 20000-1:2011 Information technology
Læs mereKirurgiske implantater Delvis og hel hofteledsprotese Del 2: Ledflader lavet af metalliske og keramiske materialer og plastmaterialer
Dansk standard DS/ISO 7206-2 1. udgave 2014-09-22 Kirurgiske implantater Delvis og hel hofteledsprotese Del 2: Ledflader lavet af metalliske og keramiske materialer og plastmaterialer Implants for surgery
Læs mereElektriske apparater til husholdningsbrug o.l. Sikkerhed Del 1: Generelle krav
Dansk standard Rettelsesblad DS/EN 60335-1/AC 1. udgave 2014-01-23 Elektriske apparater til husholdningsbrug o.l. Sikkerhed Del 1: Generelle krav Household and similar electrical appliances Safety Part
Læs mereGødning Betegnelser og specifikationer
DS-information DS/CEN/CR 12949 1. udgave 2003-12-19 Gødning Betegnelser og specifikationer Fertilizers Denominations and specifications DS/CEN/CR 12949 København DS projekt: 34104 ICS: 65.080 Deskriptorer:
Læs mereKrydderier og smagsstoffer Botanisk nomenklatur
Dansk standard DS/EN ISO 676 1. udgave 2009-07-23 Krydderier og smagsstoffer Botanisk nomenklatur Spices and condiments Botanical nomenclature DS/EN ISO 676 København DS projekt: M230052 ICS: 01.040.67;
Læs mereKapslingsklasser (IP-kode)
Dansk Standard DS/EN 60529+A1 1. udgave 2002-04-05 Kapslingsklasser (IP-kode) Degrees of protection provided by enclosures (IP Code) DS/EN 60529+A1 København DS projekt: 47050 ICS: 29.020 Deskriptorer:
Læs mereDansk standard DS/ISO/IEC 27033-5
Dansk standard DS/ISO/IEC 27033-5 1. udgave 2013-09-02 Informationsteknologi Sikkerhedsteknikker Netværkssikkerhed Del 5: Sikring af kommunikation mellem netværk, der anvender virtuelle private netværk
Læs mereFritidsdykkerservice Krav til snorkel/dykkerledere
Dansk standard DS/ISO 13970 1. udgave 2012-02-03 Fritidsdykkerservice Krav til snorkel/dykkerledere Recreational diving services Requirements for the training of recreational snorkelling guides DS/ISO
Læs mereMekaniske vibrationer Vurdering af maskinvibrationer ved måling på ikkeroterende dele Del 1: Generelle retningslinjer
Dansk standard Tillæg DS/ISO 10816-1/Amd 1 1. udgave 2014-08-14 Mekaniske vibrationer Vurdering af maskinvibrationer ved måling på ikkeroterende dele Del 1: Generelle retningslinjer Mechanical vibration
Læs mereInformationsteknologi Meddelelseshåndteringssystemer (MHS) Samarbejde med e-mail på internet
DS-information DS/ISO/IEC TR 18016 1. udgave 2004-03-25 Informationsteknologi Meddelelseshåndteringssystemer (MHS) Samarbejde med e-mail på internet Information technology Message Handling Systems (MHS)
Læs mereVarmtvandspumper Prøvning og ydeevneangivelse Del 2: Vand-til-vand- og saltvandtil-vand-varmepumper
Dansk Standard DS/ISO 13256-2 1. udgave 2002-06-20 Varmtvandspumper Prøvning og ydeevneangivelse Del 2: Vand-til-vand- og saltvandtil-vand-varmepumper Water-source heat pumps Testing and rating for performance
Læs mereInformationsteknologi Åben distribueret databehandling Referencemodel: Arkitektonisk semantik Tillæg 1: Computerbaserede formler
Dansk Standard Tillæg DS/ISO/IEC 10746-4/Amd.1 1. udgave 2002-06-04 Informationsteknologi Åben distribueret databehandling Referencemodel: Arkitektonisk semantik Tillæg 1: Computerbaserede formler Information
Læs mereIndendørsluft Del 18: Påvisning og antalsbestemmelse af skimmelsvampe Prøvetagning ved impaktion
Dansk standard Rettelsesblad DS/ISO 16000-18/Cor. 1 1. udgave 2012-01-18 Indendørsluft Del 18: Påvisning og antalsbestemmelse af skimmelsvampe Prøvetagning ved impaktion Indoor air Part 18: Detection and
Læs mereVinduer og døre Vandtæthed Klassifikation
Dansk Standard DS/EN 12208 1. udgave Godkendt:2000-12-29 Vinduer og døre Vandtæthed Klassifikation Windows and doors Watertightness Classification DANSK STANDARD - Eftertryk uden tilladelse forbudt Kollegievej
Læs mereDansk standard DS/EN
Dansk standard DS/EN 60966-2-4 3. udgave 2009-09-14 Højfrekvens- og koaksialforbindelseskabler Del 2-4: Detailspecifikation for forbindelseskabler til radio- og tvmodtagere Frekvensområdet 0 til 3 000
Læs mereCompressed air Part 1: Contaminants and purity classes
Dansk standard DS/ISO 8573-1 2. udgave 2010-05-20 Trykluft Del 1: Kontaminanter og renhedsklasser Compressed air Part 1: Contaminants and purity classes DS/ISO 8573-1 København DS projekt: M247943 ICS:
Læs mereInformationsteknologi Sikkerhedsteknikker. (MAC) Del 3: Mekanismer, der anvender universel hashfunktion
Dansk standard DS/ISO/IEC 9797-3 1. udgave 2012-01-04 Informationsteknologi Sikkerhedsteknikker Meddelelsesautentificeringskoder (MAC) Del 3: Mekanismer, der anvender universel hashfunktion Information
Læs mereSikkerhed for forlystelser og forlystelsesudstyr Del 3: Krav om eftersyn ved konstruktion, fremstilling, drift og brug
Dansk standard DS/ISO 17842-3:2015 1. udgave 2015-08-06 Sikkerhed for forlystelser og forlystelsesudstyr Del 3: Krav om eftersyn ved konstruktion, fremstilling, drift og brug Safety of amusement rides
Læs mereFritidsbåde Komfurer til flydende brændsel
Dansk standard DS/EN ISO 14895 1. udgave 2003-04-11 Fritidsbåde Komfurer til flydende brændsel Small craft Liquid-fuelled galley stoves DS/EN ISO 14895 København DS projekt: 47074 ICS: 47.080 Deskriptorer:
Læs mereGrænseflade for digital lyd Del 1: Generelt
Dansk standard Tillæg DS/EN 60958-1/A1 1. udgave 2014-09-02 Grænseflade for digital lyd Del 1: Generelt Digital audio interface Part 1: General DS/EN 60958-1/A1 København DS projekt: M277911 ICS: 33.160.30
Læs mereTeknisk tegning Almene tegneregler Del 30: Grundlæggende regler for afbildninger
Dansk Standard DS/ISO 128-30 1. udgave 2002-05-21 Teknisk tegning Almene tegneregler Del 30: Grundlæggende regler for afbildninger Technical drawings General principles of presentation Part 30: Basic conventions
Læs mereInformationsteknologi Identifikation og styring af mobile enheder Service broker for Mobile AIDC services
Dansk standard DS/ISO/IEC 29178 1. udgave 2012-06-01 Informationsteknologi Identifikation og styring af mobile enheder Service broker for Mobile AIDC services Information technology Mobile item identification
Læs mereElektriske installationer i skibe Del 501: Særlige karakteristika Elektriske fremdrivningsanlæg
Dansk standard DS/IEC 60092-501 1. udgave 2013-11-15 Elektriske installationer i skibe Del 501: Særlige karakteristika Elektriske fremdrivningsanlæg Electrical installations in ships Part 501: Special
Læs merePolybuten-1-rør (PB-1-rør) Virkning af tid og temperatur på den forventede styrke
Dansk standard DS/ISO 12230 1. udgave 2012-08-21 Polybuten-1-rør (PB-1-rør) Virkning af tid og temperatur på den forventede styrke Polybutene-1 (PB-1) pipes Effect of time and temperature on the expected
Læs mereTeknisk tegning Processkemaer til kraftværker Del 1: Specifikation af skemaer
Dansk standard DS/ISO 14084-1:2015 1. udgave 2015-06-18 Teknisk tegning Processkemaer til kraftværker Del 1: Specifikation af skemaer Process diagrams for power plants Part 1: Specification for diagrams
Læs mereDansk standard DS/EN Weibull analysis. 1. udgave
Dansk standard DS/EN 61649 1. udgave 2008-12-10 Weilbull-analyse Weibull analysis DS/EN 61649 København DS projekt: M219606 ICS: 03.120.30 Første del af denne publikations betegnelse er: DS/EN, hvilket
Læs mereInformationsteknologi Generisk kodning af levende billeder og tilknyttet lydinformation Del 7: Avanceret lydkodning (AAC)
Dansk standard Rettelsesblad DS/ISO/IEC 13818-7/Corr. 1 1. udgave 2011-01-10 Informationsteknologi Generisk kodning af levende billeder og tilknyttet lydinformation Del 7: Avanceret lydkodning (AAC) Information
Læs mereArbejde under spænding Håndværktøj til anvendelse op til 1000 V vekselstrøm og 1500 V jævnstrøm
Dansk standard DS/EN 60900 3. udgave 2012-10-16 Arbejde under spænding Håndværktøj til anvendelse op til 1000 V vekselstrøm og 1500 V jævnstrøm Live working Hand tools for use up to 1000 V a.c. and 1500
Læs merePlast Bestemmelse af termoplasts massesmelteindeks (MFR) og volumensmelteindeks (MVR) Del 1: Standardmetode
Dansk standard DS/EN ISO 1133-1 1. udgave 2012-01-25 Plast Bestemmelse af termoplasts massesmelteindeks (MFR) og volumensmelteindeks (MVR) Del 1: Standardmetode Plastics Determination of the melt mass-flow
Læs mereIkke-destruktiv prøvning Lækprøvning Kriterier for valg af metode og teknik
Dansk Standard DS/EN 1779 2. udgave 2001-10-26 Ikke-destruktiv prøvning Lækprøvning Kriterier for valg af metode og teknik Non-destructive testing Leak testing Criteria for method and technique selection
Læs mereCOPYRIGHT Danish Standards Foundation. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/ISO/IEC TS :2013
DS-information DS/ISO/IEC TS 17021-3 1. udgave 2013-05-27 Overensstemmelsesvurdering Krav til organer, der foretager audit og certificering af ledelsessystemer Del 3: Kompetencekrav til auditering og certificering
Læs mere