Storage tank with mountings. Good, stable and safe working platform. Can be adjusted to all types of tanks.

Transkript

1 LJM gro

2 The right to make alterations is reserved opyright 2012 Lind Jensens Maskinfabrik /S ocument Revision 4 ato Storage tank with mountings. Good, stable and safe working platform. an be adjusted to all types of tanks. 2

3 LJM s pump prograe complies to all demands and we have pumps ranging from size 1.5 to LJM pumps are used in storage tanks, reception pits, collecting tanks or similar where difficult media have to be pumped. ll LJM pumps can be delivered on a fixed bracket or with a simple coupling system. LJM also supply dry mounted pumps for dry sump systems. The high quality LJM pump is mounted with a mechanical sealing and overload cluth to ensure high reliability and a long operational life. The LJM pump is easily mounted and serviced in reception pits and storage tanks. When taking the pump out of the system it is possible to solve some stirring tasks. We offer a variety of mounting possibilities for all type of tanks. ll handling equipment is available in a hot dip galvanised finish or in S 316 stainless steel. 3

4 Pump on fixed bracket quipped with S-wheel and cuting plate - cuts straw and let-overs 3 m lifting chain Pump with 65 outlet P 2 min -1 PS S090-1,5 1,5 3, PS S090 is also available in 3x230V on request. PS S090 is a small pump and is very suitable for liquid manure and for installations in reception pits and small mixer tanks. very good pump for the smaller tasks... The pump can be delivered in the following variations ouplings Perrot coupling Hose coupling Other coupling types on requrest Mountings ixed bracket 3x400V, 50Hz, 4-pole - mpere input able 10 m H07RN 7x1,5 2 nsulation class, 155º Motor safety 34-5 P68 lectrical safety 3 bimetallic sensors Paint OL Pump casing GG20/25 Motor casing GG20/25 Oil casing GG20/25 Motor shaft St Sealing, motor side Oil seal ring Sealing by impeller Oil seal ring Galvanized steel 4

5 Pump on fixed bracket quipped with S-wheel and cuting plate - cuts straw and let-overs 3 m lifting chain Pump with 100 outlet P 2 min -1 P S100-2,2 2,2 5, P S100-3,0 3,0 7, P S100 is also available in 3x230V on request. P S100 is a small pump and is very suitable for liquid manure and for installations in reception pits and small mixer tanks. very good pump for the smaller tasks... The pump can be delivered in the following variations ouplings Perrot coupling Nozzle Hose coupling Other coupling types on requrest Mountings oupling claw Slide bracket ixed bracket 3x400V, 50Hz, 4-pole - mpere input able 10 m H07RN 7x1,5 2 nsulation class, 155º Motor safety 34-5 P68 lectrical safety 3 bimetallic sensors and leak sensor Paint OL Pump casing GG20/25 Motor casing GG20/25 Oil casing GG20/25 Motor shaft St Sealing, motor side Oil seal ring Sealing by impeller Si/Si Galvanized steel 5

6 quipped with S-wheel and cutting plate - cuts straw and left-overs riction clutch - safety against foreign bodies Pump on fixed Lifting chain - 5 m for pump on slide bracket bracket and 3 m for pump on fixed bracket / with coupling claw P 2 Pump with 100 outlet min -1 PH S132-5,5 5,5 12, PH S132-7,5 7,5 15, Pump with slide bracket P 2 Pump with 150 outlet min -1 PH S132-5,5 5,5 12, PH S132-7,5 7,5 15, lso available in 3x230V on request. PH S132 is a medium size slurry pump and is suitable for slurry with medium dry content and liquid manure. PH S132 is used in reception pits for pumping to storage tanks. medium size pump in the highest quality... The pump can be delivered in the following variations ouplings Perrot coupling Nozzle Hose coupling Other coupling types on requrest Mountings oupling claw Slide bracket ixed bracket 3x400V / 50Hz / 4-pole - mpere input able 10 m H07RN 12x2,5 2 nsulation class, 155º Motor safety 34-5 P68 lectrical safety 3 bimetallic sensors and leak sensor Paint Star-delta Pump casing GG20/25 Motor casing GG20/25 Oil casing GG20/25 Motor shaft Hardened and tempered steel Sealing, motor side Oil seal ring Sealing by impeller Si/Si Galvanized steel 6

7 G Materiale nr. Materiale Titel im. Vægt ertifikat Pump with coupling claw Generelle tolerancer (~S/SO m) PH R160-11,0-6/6-2S/400-50/GKVG Godk. ato 265,56 kg rstatter cr ato Sign. Projekt nr. Tolerance Nominel mål hb O ver T.o.m. Liniæ r Vinkel 0,5 3 ` - ` 3 ~ 00' ato Lind Jensens Maskinfabrik /S ` 0,5 ` 3 ~ 00' Kroghusvej 7, Højmark Vare nr ` 1,0 ` 2 ~ 00' Målestok K-6940 Lem St ` 1,5 ` 1 ~ 00' Tel (0,161) ` 2,5 ` 0 ~ 30' ax SO ` 4,0 ` 0 ~ 20' -mail group@ljm.dk Tegn.format rk Rev ` 6,0 ` 0 ~ 20' Home page Group 3 3/ ` 8,0 ` 0 ~ 20' ette dokument og dets information er LJM s ejendom. nformationen er fortrolig og er beskyttet af lov om ophavsret. nformationen er udelukkende til disposition for personlig brug og kun til fremstilling, reparation eller brug af originale LJM produkter, i henhold til kontrakt eller anden skriftlig aftale herom med LJM. Materialet må ikke, hverken helt eller delvist, kopieres, reproduceres, offentliggøres eller i nogen som helst form gøres tilgængelig for tredje part uden skriftligt samtykke fra LJM. nformationen må ikke overdrages eller udleveres til tredje part, hverken direkte eller i succession til modtagerens rettigheder quipped with S-wheel and cutting plate - cuts straw and left-overs riction clutch - safety against foreign bodies 5 m lifting chain Pump with 150 outlet min-1 G PH R160-11,0 11,0 21, PH R160-15,0 15,0 28, PH R160-18,5 18,5 35, ,0 and 15,0 available in 3x230V on request. 18,5* only 3x400V. PH R160 is a powerful pump for slurry with a high dry content. PH R160 is suitable for reception pits and storage tanks. powerful and strong pump in the highest quality... The pump can be delivered in the following variations ouplings Perrot coupling Nozzle Hose coupling Other coupling types on requrest Mountings oupling claw Slide bracket ixed bracket mp. able nsulation class Motor safety lectrical safety Pump casing Motor casing Oil casing Motor shaft Sealing, motor side Sealing by impeller 3x400V / 50Hz / 4-pole mpere input 10 m H07RN 12x2,52 (* 7G4 + 3X1,5 ² S07RN-), 155º 34-5 P58 3 bimetallic sensors and leak sensor Paint Star-delta GG20/25 GG20/25 GG20/25 Hardened and tempered steel Oil seal ring Si/Si Galvanized steel 7

8 High pressure pump with slide bracket and nozzle quipped with S-wheel and cutting plate - cuts straw and left-overs 5 m lifting chain Pump with 100 outlet min-1 PHT R160-15,0 15,0 28, PHT R160-18,5 18,5 35, ,0 also available in 3x230V on request. 18,5* only 3x400V. PHT R160 is a high pressure pump and is especially suitable for heavy duty tasks. PHT R160 has capacity for pumping long distances. PHT R160 is also available with fixed bracket or coupling claw. PHT R160 - a heavy duty pump in high quality... The pump can be delivered in the following variations ouplings Perrot coupling Hose coupling Nozzle Other coupling types on requrest Mountings oupling claw Slide bracket ixed bracket - able nsulation class Motor safety lectrical safety Pump casing Motor casing Oil casing Motor shaft Sealing, motor side Sealing by impeller 3x400V / 50Hz / 4-pole mpere input 10 m H07RN 12x2,52 (* 7G4 + 3X1,5 ² S07RN-), 155º 34-5 P68 3 bimetallic sensors and leak sensor Paint Star-delta GG20/25 GG20/25 GG20/25 Hardened and tempered steel arbon/eramic Si/Si Galvanized steel 8

9 Pump with 100 outlet min -1 TP S132-5,5 5,5 11, TP S132-7,5 7,5 14, Motor power - mpere input Motor rotations 3x400V / 50Hz / 4-pole Motor Standard motor after P55 nsulation class, Sealing by impeller Oil seal ring Paint Soft starter Galvanized steel Pump with 160 outlet min -1 TP S160-11,0 11,0 21, TP S160-15,0 15,0 27, Motor power - mpere input Motor rotations 3x400V / 50Hz / 4-pole Motor Standard motor after P55 nsulation class, Sealing by impeller Oil seal ring Paint Soft starter/star-delta Galvanized steel Pump with 100 outlet min -1 TPHT S180-18,5 18,5 32, Motor power -. mpere input Motor rotations 3x400V / 50Hz / 4-pole Motor Standard motor after P55 nsulation class, Sealing, motor side arbon/eramic Sealing by impeller Si/Si Paint Star-delta Galvanized steel 9

10 Good gear for slurry and manure 10

11 gitators for all tank types. LJM has a complete prograe of submersible agitators from 1,5 to 18,5 - all supplied with a 2-blade propeller to increase the capacity. The LJM submersible agitators with mechanical sealing is highly suitable for even the most difficult stirring tasks. Mounting- and a service friendly agitator for a wide range of different tasks such as Homogenisation in reception pits Mixing in storage tank before spreading Scrambling and flow making in digestion tank We offer a variety of mounting possibilities for all type of tanks. ll handling equipment es available in a hot dip galvanised finish or in S 316 stainless steel. The agitators is also available with an actuator. This solution is highly suitable for bigger storage tanks with sedimentation, as for example with pigs-slurry. The agitators can be mounted with an actuator which is very suitable for pig manure with sediments. The actuator secures a better utilisation of the slurry. 11

12 G n2 min-1 G OMS S112-1,5-2S 1,5 5, OMS S112-2,5-2S 2,5 7, OMS S112 is also available in 3x230V on request. OMS S112 is a compact mixer and is direct driven. OMS S112 is especially suitable for mixing slurry from pighold in reception pit before pumping to storage tank. OMS S112 is also available in a complete stainless steel model for the aggressive fluids. - able nsulation class Motor safety lectrical safety n2 Motor casing ront casing Propeller Motor shaft Output shaft Sealing, motor side Sealing, propeller side 3x400V / 50Hz / 8-pole mpere input 10 m H07-RN 7x1,52, 155º 34-5 P58 3 bimetallic sensors and leak sensor Propeller rotations OL St St St (2S) Paint St S 329 arbon/eramic Si/Si Galvanized steel 12 G

13 G n2 min- 1 OMPG S100-2,2-2S 2,2 5, OMPG S100-3,0-2S 3,0 7, OMPG S100-4,0-2S 4,0 8, G Ændr.dato esigntryk (+) esigntryk (-) Prøvetryk (+) Prøvetryk (-) Tolerancer Ændr.nr. Titel L K OMPG S100 is also available in 3x230V on request. ette dokument og dets information er LJM s ejendom. nformationen er fortroli brug og kun til fremstilling, reparation eller brug af originale LJM produkter, i he eller delvist, kopieres, reproduceres, offentliggøres eller i nogen som helst form overdrages eller udleveres til tredje part, hverken direkte eller i succession til m Ændr.dato n2 min- 1 Ændr.nr. rstatter rstatter dato OMPG S132-5,5-2S esigntryk (+) Titel Godk. 5,5 12, Projekt nr. esigntryk (-) ato OMPG S132-7,5-2S 7,5 Prøvetryk 15,2 (+) Sign. 360hb Materiale nr. Prøvetryk (-) ato Tolerancer Lind Jensens Maskinfabrik /S Målestok okument nr. OMPG S132 is also available in 3x230V on request. Kroghusvej 7, Højmark (110) K-6940 Lem St SO Tegn.format OMPG S100 and S132 are medium size agitators. These agitator types are suitable for small and medium size storage tanks and for slurry with medium high dry content. OMPG S100 and S132 have planetary gear and are extremely reliable. OMPG S100 and S132 are also available with stainless steel propeller and fittings. G ette dokument og dets information er LJM s ejendom. nformationen er fortrolig og er beskyttet af lov om ophavsret. nformationen er udelukkende til disposition for personlig brug og kun til fremstilling, reparation eller brug af originale LJM produkter, i henhold til kontrakt eller anden skriftlig aftale herom med LJM. Materialet må ikke, hverken helt eller delvist, kopieres, reproduceres, offentliggøres eller i nogen som helst form gøres tilgængelig for tredje part uden skriftligt samtykke fra LJM. nformationen må ikke overdrages eller udleveres til tredje part, hverken direkte eller i succession til modtagerens rettigheder. 3 Vægt rk Kg Rev. 1 / 1 3x400V / 50Hz / 4-pole - mpere input able 10 m H07RN 7x1,5 2 /12 x 2,5 2 nsulation class, 155º Motor safety 34-5 P68 lectrical safety 3 bimetallic sensors and leak sensor n2 Propeller rotations Gear Planetary gear Paint irect / Star elta / Soft starter Motor casing GG20 Gear casing GG25 Propeller 2-bl. in st Motor shaft St Output shaft S 329 Sealing, motor side arbon/eramic Sealing, propeller Si/Si Galvanized steel an also be delivered as explosion proof TX ( 2 G x d T3) 13

14 Materiale nr. Generelle tolerancer (~S/SO v) Materiale Titel 4-10/02/ Tolerance Nominel mål O ver T.o.m. Lineæ r Vinkel 0,5 3 ` - ` 3 ~ 00' Lind Jensens Maskinfabrik /S 3 6 ` 0,5 ` 3 ~ 00' Kroghusvej 7, Højmark 6 30 ` 1,0 ` 2 ~ 00' K-6940 Lem St ` 1,5 ` 1 ~ 00' Tel ` 2,5 ` 0 ~ 30' ax ` 4,0 ` 0 ~ 20' -mail group@ljm.dk ` 6,0 ` 0 ~ 20' Home page Group ` 8,0 ` 0 ~ 20' ette dokument og dets information er LJM s ejendom. nformationen er fortrolig og er beskyttet af lov om ophavsre brug og kun til fremstilling, reparation eller brug af originale LJM produkter, i henhold til kontrakt eller anden skriftlig eller delvist, kopieres, reproduceres, offentliggøres eller i nogen som helst form gøres tilgængelig for tredje part ude overdrages eller udleveres til tredje part, hverken direkte eller i succession til modtagerens rettigheder. G Typ n2 min-1 Materiale Materiale nr. OMPG R160-11,0-2S 11,0 21,0 Titel 268 Generelle tolerancer im ertifikat Vægt ato ato G OMPG R160-15/ S/ /O/ Godk rstatter 460 H OMPG R160-15,0-2S 15,0 28,2 4-10/02/ OMPG R160-18,5-2S 18,5 35, (~S/SO v) kg Sign. Projekt nr. Tolerance Nominel mål PG O ver T.o.m. Lineæ r Vinkel 0,5 3 ` - ` 3 ~ 00' ato Lind Jensens Maskinfabrik /S ` 0,5 ` 3 ~ 00' Kroghusvej 7, Højmark Vare nr ` 1,0 ` 2 ~ 00' Målestok K-6940 Lem St ` 1,5 ` 1 ~ 00' (0,151) Tel ` 2,5 ` 0 ~ 30' ax SO ` 4,0 ` 0 ~ 20' -mail group@ljm.dk ` 6,0 ` Tegn.format rk 0 ~ 20' Rev Home page Group 3 4/ ` 8,0 ` 0 ~ 20' ette dokument og dets information er LJM s ejendom. nformationen er fortrolig og er beskyttet af lov om ophavsret. nformationen er udelukkende til disposition for personlig brug og kun til fremstilling, reparation eller brug af originale LJM produkter, i henhold til kontrakt eller anden skriftlig aftale herom med LJM. Materialet må ikke, hverken helt eller delvist, kopieres, reproduceres, offentliggøres eller i nogen som helst form gøres tilgængelig for tredje part uden skriftligt samtykke fra LJM. nformationen må ikke overdrages eller udleveres til tredje part, hverken direkte eller i succession til modtagerens rettigheder ,0 and 15,0 available in 3x230V on request. 18,5* only 3x400V OMPG R160 is a powerful agitator for the large storage tanks and for slurry with a high dry content. OMPG R160 has planetary gear and the propeller have a hydro dynamic shape and make the agitator perform optimum. OMPG R160 is also available with stainless steel propeller and fittings. OMPG R160 - maybe even the strongest agitator on the market... - able nsulation class Motor safety lectrical safety n2 Gear Motor casing Gear casing Propeller Motor shaft Output shaft Sealing, motor side Sealing, propeller im. OMPG R160-15/ S/ /O/ 3x400V / 50Hz / 4-pole mpere input 10 m H07RN 12x2,52 (* 7G4 + 3X1,5 ² S07RN-), 155º 34-5 P58 3 bimetallic sensors and leak sensor Propeller rotations Planetary gear Paint Star elta / Soft starter GG20 GG25 2-bl. in st St S 329 arbon/eramic Si/Si Galvanized steel an also be delivered as explosion proof ( 2 G x d T3) except 18,5 14

15 Submersible mixing technique for biogas plant application Mixing tanks Pre-storage tanks ermentation tanks Secondary fermentation tanks Storage tanks dvantages Two mechanical shaft seals High electrical safety level based on 3 bimetallic sensors and one leakage sensor (Please note the agitators are also available with a new power failure alarm system). The number of propeller revolutions is reduced via a planetary gear Large propeller diameter Highly optimized stirring performance based on propeller size, propeller design and number of propeller revolutions Motor performance for heavy duty stirring or mixing tasks Three years service interval The agitators/mixers are delivered with motor performances up to 18,5 and with explosion proof certificate; TX ( 2 G x d T3). 18,5 is not available with TX. Mounting for submersible agitators / mixers ll mounting brackets are available in hot dip galvanized steel, stainless steel or acid proof stainless steel. Option for mounting on top or on side of the tank also available for open and gas tight tanks We offer customized solutions for flow making and homogenization of even very difficult liquids. 15

16 16

17 Good gear for slurry and manure 17

18 LJM has a powerful product range for slalom mixers in 7,5, 11,0, 15 and 18,5 - all equipped with 2 bladed propellers for optimum output. LJM s slalom mixers are of high quality and equipped with planetary gear, mechanical shaft seals together with temperature and leakage sensors. LJM slalom mixer is made for daily mixing in manure channels underneath slats. aily mixing prevents development of gas and crust. ully automatic start/stop with a timer/clock. The slalom mixer is easy to mount as well as service and maintenance is very simple. Powerful and dependable agitators with high output performance. The mixers are build in powerful cast iron construction. The slalom mixer flow ring is in powerful hot-galvanized material. Manure system which is easy and simple to handle in everyday life, even in very large stables. ll handling equipment is made in hot-galvanized or stainless acid proof steel. 18

19 n2 Min -1 OMPG K132-7,5-2S 7,5 15, OMPG K160-11,0-2S 11,0 25, OMPG K160-15,0-2S 15,0 29, OMPG K160-18,5-2S 18,5 35, The slalom mixers are also available in 3 x230v on request. 18,5* only available in 3x400V Like OMPG the OMPG slalom mixer is a powerful agitator for slurry with a high dry content. OMPG slalom mixer has planetary gear and the super hydro dynamic propeller ensures optimum performance. OMPG Slalom mixer - maybe even the strongest slalom mixer on the market... Motor power 3x400V / 50Hz / 4-pole able 10 m H07RN 12x2,5 2 (* 7G4 + 3X1,5 ² S07RN-) nsulation class, 155º Motor safety 34-5 P58 lectrical safety 3 bimetallic sensors and leak sensor - mpere input Gear Planetary gear Paint Star-delta / Soft starter Motor casing GG20 Gear casing GG25 Propeller 2-bl. in st Motor shaft St Output shaft S 329 Sealing, motor side arbon/eramic Sealing, propeller side Si/Si Galvanized steel n2 Propeller rotations 19

20 Lind Jensens Maskinfabrik /S Kroghusvej 7, Højmark, K-6940 Lem St. Tel Home page