RFID i Danmark presents: RFID Conference International RFID Conference in Copenhagen May 21 st Probably the largest RFID Events in Scandinavia in 2015 We are very pleased to invite to what is probably the largest RFID Event in Scandinavia in 2015. Following up on the successful conferences in 2011, 2012, 2013 and 2014, RFID i Danmark and partners are organizing this Conference with international keynote speakers, exhibition, networking and a number of actual end-user case study presentations. IT-University of Copenhagen Rued Langgaards Vej 7 DK-2300 Copenhagen S Registration: 2015.rfididk.org/registration/ Cases: Keynote by Frank Honore, Google. The RAIN Alliance was founded in 2014 to promote, educate and increase awareness of UHF RFID to businesses and consumers worldwide. AIM Global, Impinj and Smarttrac were not very surprising as organisations behind the initiative but on the list were as well Intel and Google. For the first time the RAIN Alliance will be properly introduced to Scandinavian companies and organizations. Efficiency increase by RFID in tool-making and toolmanagement. In tool-making and tool-management it is required to identify each individual component whenever a tool is moved, installed or maintained. Identification is usually enabled by code engraved or printed on a surface or by an attached ID plate. This kind of identification, as well as paper instructions, is prone to mechanical defects and mistakes due to its manual read-out. Pervasive RFID! Keynote presentation by Pankaj Shukla, Director, Global RFID Market Development at Zebra Technologies Over the last decade, RFID has established itself as a technology of immense value because of its high accuracy, speed of use and ability to solve variety of use cases in multiple verticals. New Danish RFID case in manufacturing Hilding Anders Hilding Anders has been helping people get a good night s sleep since 1939; We are proud to deliver beds and mattresses for all needs from the most basic, to the most exclusive. Over the last decade, Hilding Anders has acted as a consolidator in the European bedding industry. 14 acquisitions in ten years have made Hilding Anders the undisputed leader in their core geographies: Europe and Asia.. Organizers:
Welcome RFID i Danmark 2015 Conference Increased efficiency and competitiveness through tracking and tracing Implementation of tracking and tracing technologies typically by the use of radio waves have already increased efficiency and competitiveness for a number of companies, in and around the world. But, most companies private as well as public haven t even started yet. At the annual RFID i Danmark conference, a number of leading Danish and international companies will share their experiences; 1 Why did they implement tracking and tracing technology? 2 Have significant advantages been achieved? 3 How could they justify the initial investment? 4 What Lessons learned during the implementation of tracking and tracing? 5 What to do different, if they were to start from scratch again? 6 Future plans with more tracking and tracing? You can meet representatives from companies using RFID in their production, logistics, retail business, service maintenance history, localisation of employees and assets along with representatives from both manufacturers of RFID equipment and tags as well as providers of RFID based solutions. They will share with you their experiences on how they use RFID to optimize processes and create business value in their particular company. We will have high level visionary key note presentations in plenum and we will again this year go into smaller groups in parallel tracks. This year we will have a track with use cases and in parallel we will have two WORKSHOPS. The focus of the use cases will not be on the technologies, but rather on how companies achieve advantages through the use of the technologies. The list of presentations will continuously be updated here PRESENTATIONS where you also can find further information about each presentation. To learn more about current solutions and products you get this unique opportunity to explore our RFID exhibition. Where suppliers will be ready to explain, demonstrate and answer your questions. The list of exhibitioners will be updated on EXHIBITORS.. Henrik B. Granau Founder of RFID i Danmark The conference offers Insight in innovative RFID solutions Insight into RFID cost / benefit Inspiration for your own business Networking and knowledge sharing
IT-Universitetet, Copenhagen The IT University of Copenhagen is the youngest university in (established in 1999). The IT University strives to create value with IT and deliver top quality research and education within a wide range of information technology subjects; from e.g. design and games development to business and computer science. Approximately 2,500 students are enrolled at the university, and it has a staff close to 500, among them 50 PhD s and 70 tenured faculty. More than half of the latter are from abroad. Most researchers participate in collaborative projects with private companies, public institutions and foreign researchers. Web: www.itu.dk Contact: Jørgen Staunstrup, jst@itu.dk. Main sponsor: Platin sponsor: Premium sponsor: Sponsors: Granau IT RFID i Danmark It is the intention that on a non-profit basis the network is to be the gathering of all RFID activities in and the purpose is to create opportunities and enhance competitiveness of both public and private companies in through usages of RFID technology. The network, which is organised as an association, works to reach its goals through exchange of experience, construction of a public accessible knowledge database about RFID, newsletters and hosting of events.
Key-note Presentations in Plenum Plenum in Auditorium 1 08.00-09.00 09.00-09.15 09.15-09.30 09.30-09.50 09.50-10.20 10.20-10.50 10.50-11.00 11.00-11.30 11.30-12.40 12.40-13.40 13.40-14.50 14.50-15.20 15.20-15.50 15.50-16.20 16.20-16.30 Arrival and registration Welcome by Jørgen Staunstrup, IT University Introduction to RFID i Danmark 2015 by Henrik B. Granau, RFID i Danmark Highlights from RFID Journal Live 2015 in San Diego by Henrik B. Granau Pervasive RFID! by Pankaj Shukla, Director, Global RFID Market Development at Zebra Over the last decade, RFID has established itself as a technology of immense value because of its high accuracy, speed of use and ability to solve variety of use cases in multiple verticals.in this presentation, we will take a closer look at why RFID has so much appeal, the current trends in various industries and RFID technology itself; RFID s use cases and benefits and lessons it has offered on this journey from a gee-whiz technology to a matured operational technology. The RAIN Alliance and why Google was a co-founder by Dr. Frank Honore, System Architect at Google [x], Life Sciences The RAIN Alliance was founded in 2014 to promote, educate and increase awareness of UHF RFID to businesses and consumers worldwide. AIM Global, Impinj and Smarttrac were not very surprising as organizations behind the initiative but on the list were as well Intel and Google (!)For the first time the RAIN Alliance will be properly introduced to Scandinavian companies and organizations and with the help from AIM we are proud to present to you both the RAIN Alliance and why your organizations should consider joining the alliance and Google s own explanation on why they was a co-founder on the initiative. Introduction to IT University projects with ibeacons Coffee and Exhibition Presentations and Workshops in parallel (see page 6-9) Lunch and Exhibition Presentations and Workshops in parallel (see page 6-9) Coffee and Exhibition Moods of Norway Increases Sales via RFID by Hans Petter Hübert, Supply Chain Manager Moods of Norway has equipped 13 of its stores with RFID technology to better manage its inventory. This deployment follows a six-month pilot that boosted sales of men s shirts and suits by double digits. During the pilot (which consisted of tagging men s shirts and suits, and using a handheld reader to conduct inventory counts on the sales floor), the system not only provided 98 to 99 percent inventory accuracy, but also reduced the amount of labour employees spent performing manual inventory checks, thereby enabling more frequent checks. What is next? by Awareness Track physical behavior and use Intelligent On-Site Marketing on Point of Interest by combining Apps, Wifi, Beacons and mcrm Wrap-up and Closing Remarks by Henrik B. Granau, RFID i Danmark The agenda is subject to alterations.
150507_DENMARK_A5-Adv.V11.pdf 1 07-05-15 12:19
Presentations in Auditorium 1-11.30-14.50 While Workshops are conducted in parallel in separate rooms, the following presentations are presented in Auditorium 1. 11.30-11.50 11.55-12.15 12.20-12.40 12.40-13.40 13.40-14.00 Efficiency increase by RFID in tool-making and tool-management by Yilmaz Benzer, Sales Manager Neosid Pemetzrieder GmbH & Co.KG In tool-making and tool-management it is required to identify each individual component whenever a tool is moved, installed or maintained. Identification is usually enabled by code engraved or printed on a surface or by an attached ID plate. This kind of identification, as well as paper instructions, is prone to mechanical defects and mistakes due to its manual read-out. A RFID system provides a machine-readable identification of tools and components. With all tool data and instructions stored centrally and interaction with ERP software, the system enhances efficiency and reduces mistakes by relieving workers. It enables automatic documentation and represents the basis for an automated toolproduction and management. Real Time Lorry Inventory on the Road by Geir Vevle, HRAFN - proof of delivery - proof automatic goods receival - proof of pickup New Danish RFID case in manufacturing Hilding Anders by Michael Holm Pedersen, Production Manager at Hilding Anders In the continuous improvement of automation and introduction of a new MES solution in, Hilding Anders realized that an advanced RFID platform was necessary to feed machines and IT-systems with live data. RFID improves the flexibility of the production, automates processes, reduces the risk for potential errors and delivers live data to the management about production flow. Lunch and Exhibition Welcome to the 21st century s cellar The ultimate wine partner by Mathieu Nidegger, Co-Founder of La Cave Vivante La Cave Vivante offers a comprehensive and innovative approach to wine cellar management for both private and professional users. Our objective is to offer an automated just-in-time cellar management system that minimizes the financial investment of the user while simplifying the management of his cellar. To do this, we have developed a mobile application synchronized with an RFID recognition system installed inside the cellar of our customers. The system automatically monitors every entry or exit. No need to keep a wine cellar book, the stock is automatically updated. 14.05-14.25 14.30-14.50 Garment management at the Hospital by Lasse Cederquist, 2trace Hygiene quality and powerful management tools RFID projects in Italy by Luca Nardini, CAEN RFID Sales Manager CAEN RFID is the leading manufacturer of UHF RFID devices in Italy since 2002. Many End Users around the world are using CAEN RFID technology for different applications like Fashion & Retail, Waste Management, Access Control, Logistics and Industrial Manufacturing. Hence, CAEN RFID have a good solid position to present the Italian UHF RFID scenario providing an overview of interesting and huge installations developed by its customers. The agenda is subject to alterations.
HealthCare Workshop 11.30-14.50 (in Danish) HealthCare Workshop Hvilke sporbarhedsteknologier er bedst egnet til hvilke formål på et hospital? Hvilke standarder er de rigtige, at basere sine installationer på? Findes der dokumenterede business cases, eller er RFID bare hype? Hvor er der eksempler på at RFID-teknologien rulles ud, efter at være blevet afprøvet? Teknologier, der kan anvendes til sporing, identifikation og opsamling af data er særdeles interessante for de danske hospitaler. De massive investeringer i nyt hospitalsbyggeri i Danmark har for alvor bragt RFID i fokus, som en teknologi, der potentielt kan anvendes til at skabe overblik og bidrage til de løbende effektiviseringskrav på hospitalerne. Da vi står over for noget der er meget vigtigt og som bliver stort for healthcare området i årene fremover er der dog fortsat mange uafklarede spørgsmål i forhold til løsningerne og deres implementering. RFID dækker over mange forskellige teknologier, som er baseret på forskellige internationale standarder, forskellige frekvenser, og er af forskellig konkret udformning (med/ uden batterier osv.) Det er med andre ord let at tabe overblikket over de mange muligheder og kravene forbundet med dem, og det medfører et behov for erfaringsudveksling og vidensdeling på området det vil vi skabe her! Workshoppen er opdelt i to sessioner; Del 1: Hvor langt er man kommet i implementeringen af it understøttelse af Lokalisering og emneidentifikation på Det Ny Universitets Hospital i Århus, Region Midtjylland Gevinster, udfordringer og opdagelser indtil nu. V/ Henrik Stilling it-arkitekt, Region Midtjylland (eller Lead Architect Service Logistik)Status rapportering om gennemførte aktiviteter og erfaringer fra processen ved Leverandør teamet bag DNU emnesporbarhed og identifikation på DNU V/ Keld Ole Nielsen Lyngsoe systems og Thomas Toftkjær Systematic Del 2: Reference arkitektur for lokalisering og emneidentifikation i sundhedsvæsenet. Regionerne har i fællesskab udarbejdet en referencearkitektur, et fælles grundlag for lokalisering og emneidentifikation både internt i og på tværs af regioner. Referencearkitekturen konsoliderer brugen af en række globale standarder bl.a. fra GS1. Hvordan anvendes referencearkitekturen og hvad betyder globale standarder for fremtidens sundhedsvæsen. V/ Henrik Stilling it-arkitekt, Region Midtjylland (eller Lead Architect Service Logistik, Region Midtjylland) Reference arkitektur for automatisering Information om denne og mulighederne den giver sygehusvæsenet i årene fremover V/ Jesper Kervin Franke, GS1 Vi håber at anden del bliver meget interaktiv og at vi vil have deltagere fra alle regioner og andre relevante organisationer og styrelser og at de vil blande sig i debatten. Workshoppen arrangeres af AIM, GS1 og RFID i Danmark.
ibeacons Workshop 13.40-14.50 (in Danish) ibeacons - det nye sort? ibeacons giver helt nye muligheder for stedbestemt kommunikation på smartphones og til lokalisering af genstande. Teknologien benyttes i dag primært til mobil markedsføring i detailhandlen, men udbredes hurtigt til nye områder, fx formidling på museer, vejvisning i bygninger og optimering af service. ibeacons kan købes direkte hos producenterne, men tilbydes også i stigende grad som en del af cloud-baserede IT-platforme. ibeacons er en afgrænset anvendelse af Bluetooth Low Energi (BLE) standarden. BLE har mere at byde på end blot en lokaliseringsteknologi. BLE kan kobles med sensorer, fx temperatur-sensorer, så min/max temperaturen under en forsendelse kan aflæses fra en standard mobiltelefon. Denne workshop giver dig indsigt i teknologien bag og muligheder med ibeacon og viser eksempler på konkrete løsninger og anvendelsesmuligheder. Arrangør: Innovationsnetværket InfinIT og Alexandra Instituttet A/S Introduktion til ibeacon ibeacons og hvordan de placere sig i forhold til andre lokaliseringssteknoloiger v/tejs Scharling, InfinIT, Alexandra Instituttet Brugsmuligheder og hvordan du kommer igang med ibeacons v/ Martin Wickings, HeyBuy Retningsbestemt Beacon, udviklet af RTX v/ RTX A/S Andre anvendelser og perspektiver for brugen af ibeacons og dynamic Bluetooth beacons v/tejs Scharling, InfinIT, Alexandra Instituttet Diskussion, erfaringsudveksling og afrunding. Netværk og flere aktiviteter. Ret til ændringer I agendaen forbeholdes
Udvikling skal baseres på standarder GS1 Standarder er et fælles sprog for unik identifikation, automatiseret datafangst - fx via RFID - og datadeling. Det fælles sprog skal til for at understøtte alle anvendelser af RFID fra Business-to-Business til Business-to- Consumer. GS1s standard for RFID hedder Electronic Product Code (EPC). EPC er en unik produktidentifikation, der indkodes i en RFID-tag, og er baseret på de allerede eksisterende identifikationsnøgler som fx GTIN, GLN og SSCC. Hvem er GS1? GS1 er en global not-for-profit organisation, som udvikler standarder, der effektiviserer forsyningskæder. GS1 Standarderne giver unik produktidentifikation, automatiseret datafangst (stregkoder/rfid) og datadeling. Benefits inkluderer gennemsigtighed i forsyningskæden, bedre sporbarhed og høj datakvalitet. Hvad kan vi hjælpe jer med? Kontakt os på telefon 39 27 85 27 eller info@gs1.dk eller besøgwww.gs1.dk
The Alexandra Institute The Alexandra Institute helps public and private organisations develop innovative, IT-based products and services based on cutting-edge IT research. We are a non-profit company with a mission to create value, growth and welfare in society. Our team of specialists design novel, innovative IT-based products and services. We apply our skills in software, user involvement and innovation methods to create technological solutions of commercial relevance with the aim of helping companies boost their business. We help you identify how IT can develop and support your organisation and business We provide knowledge about the latest trends within our areas of expertise We develop and optimise software We perform reviews of software and architecture We provide effectiveness evaluations, benefits realisation analyses and best practice guidance The Alexandra Institute also bring this knowledge into play in our consultancy services and our innovation networks. In this way, we contributes to improving the innovation processes in organisations and to enhancing their competitive position. Web: www.alexandra.dk Contact: Ole Lehrmann Madsen, CEO, ole.l.madsen@ alexandra.dk InfinIT Innovation network for IT InfinIT is a Danish network for innovative utilization of IT. Our goal is to convert the infinite possibilities that IT offers into concrete collaborations between research and industry. InfinIT invites researchers and enterprises working with process or product innovation with IT to participate in collaboration projects and the exchange of knowledge, thus creating a forum where we can work together to generate exactly the knowledge that Danish industry and society needs. InfinIT are continually involved in cooperations with various domains e.g. Smart City, Lifestyle, Internet of Things, Intelligent Buildings, Wearables, Intelligent Transport Systems etc. The tracking & positioning interest group One of InfinIT s eight interest groups focus on developing new services based upon tracking- & positioning technologies. This group is co-organizer off The RFID i Danmark 2015 Conference. The membership af InfinIT and the tracking & positioning interest group is free. Contact: Tejs Scharling, Lab Manager, tejs.scharling@alexandra.dk Web: www.infinit.dk AIM Industry association for suppliers of automatic identification and data mobility AIM works to promote the future markets and technologies for automatic identification and data mobility to benefit the members of the association. AIM is a non-profit organisation and is a part of the international AIM Global network. The purpose of AIM is - To be the natural community for suppliers of solutions and products using automatic identification and data mobility. - To increase usages of automatic identification and data mobility. - To give potential users of the technology the reas surance of the suppliers being a parts of a global professional ethical trade community. - To be the common voice of the industry and by that influence the political scene. - To be the natural contact for the media regarding automatic identification and data mobility. Web: www.aimdenmark.dk Contact: hbg@granauit.dk
RFID i Danmark Join RFID i Danmark as a member RFID i Danmark focus on strengthening the opportunities for exchanging experiences especially between companies, who has practical experience in the shared fields of interest. It could be logistics, traceability, production, retail, health care etc. Community building today can happen effectively even though all activity happens on the internet. A great supplement to this is still meeting in person, seminars, company visits etc. At RFID i Danmark we work with a combination of virtual and physical networking. As a member of RFID i Danmark you get access to webinars and other information for only kr. 300 per year. If you want to be a member of the more extensive networking activities there are the following options For companies with more than 9 employees the annual fee is kr. 6.400 ex. VAT and includes that 2 persons from the company can participate in the networking meetings. For companies with less than 10 employees the annual fee is kr. 3.200 ex. VAT and includes that 1 person from the company can participate in the networking meetings. For private persons wanting to participate in networking meetings the annual fee is kr. 1.800 ex. VAT. Your challenges as starting point at the networking meetings The members chooses the agenda themselves, hence the debate is always based on your current challenges. Exchange of experience is the keyword. The RFID i Danmark secretariat has an extensive experience regarding RFID applications and the technologies put knowledge and international relations at the disposal of the group. Gain: Presentation on every meeting from RFID i Danmark about development and experiences national and inter national. A confidential forum for discussions and exchange of knowledge. A possibility to present your own projects and get feed back from the rest of the group. 2-3 meeting pr. year a 3 hours (mostly 13-16) visiting members of the group. Networking dinner associated with the yearly RFID i Dan mark conference. RFID i Danmark will take care of the practical matter. So all you have to do is concentrate on your outcome. Join RFID i Danmark by doing one of the following Send an e-mail to henrik@rfididk.dk with your name, company, e-mail, address, phone number and which of the four options above you want. Then we will contact you. Or visit our website at www.rfididk.org/363-2/ and register by filling out the form. Then we will contact you. If you have any other questions don t hesitate to contact Henrik Granau at 21 823 835 or visit us at our exhibition stand at the conference.
OBID i-scan OBID i-scan Blade Handheld Reader Wireless HF handheld reader for inventory processes in libraries, laundries and logistical applications. ID ISC.PRH200 offers t Powerful Boost Mode up to 4W t Seamless work integration t Long operating times (up to 16h) t Integrated antenna & WLAN module ID ISC.PRH200 OBID RFID by FEIG ELECTRONIC FEIG ELECTRONIC GmbH Lange Straße 4 D-35781 Weilburg Phone.: +49 6471 3109-0 Fax: -99 E-mail: OBID@feig.de www.feig.de 3448_AZ_iscan_PRH200_173x247_en_RZ_th.indd 1 13.05.14 14:19
ark Organizers: Main sponsor: Granau IT Platin sponsor: Premium sponsor: Sponsors: Granau IT Exhibitors: Granau IT IT-Universitetet secure open